Database Users

No Gsm

Could anybody help me? phone doesn't work on my tytn. no mater with what (original)rom i flash it it just doesnt want to work. when i go to device information there is no radio and no imei.

cukl said:
Could anybody help me? phone doesn't work on my tytn. no mater with what (original)rom i flash it it just doesnt want to work. when i go to device information there is no radio and no imei.
Click to expand...
Click to collapse
Have you been through these links?:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
http://forum.xda-developers.com/showthread.php?t=281533
Mike

Sounds like you're buggered - no GSM is usually quite easy to fix now if you have hard SPL, but I don't think a missing IMEI is so easy
Try this thread http://forum.xda-developers.com/showthread.php?t=286755 There's lots to read but someone might be able to help.
If it doesn't work, try a complete upgrade (CID/SPL/ROM/RADIO) using Mrvanx's guide. http://forum.xda-developers.com/showthread.php?t=299462 I'd recomment Black 2.5 or LSVW as these are stable ROMS and radio 1.38, also hardSPLv7 (Olipro 2.10).
Also try searching for IMEI (Use advanced search and look for posts not threads)
Good luck
cukl said:
Could anybody help me? phone doesn't work on my tytn. no mater with what (original)rom i flash it it just doesnt want to work. when i go to device information there is no radio and no imei.
Click to expand...
Click to collapse

@mikechannon
I've tryed the thing in the first link but it says "password incorect"

cukl said:
@mikechannon
I've tryed the thing in the first link but it says "password incorect"
Click to expand...
Click to collapse
Check PM
Mike

hi brother mikechannon i am having the same problem here also, when flash original rom , it will stop at 13% or 14% , if flash radio , it wont even start , it will stop at 0% and fail , can boot into OS , but show NO GSM and no imei number ! please help

hanyean1 said:
hi brother mikechannon i am having the same problem here also, when flash original rom , it will stop at 13% or 14% , if flash radio , it wont even start , it will stop at 0% and fail , can boot into OS , but show NO GSM and no imei number ! please help
Click to expand...
Click to collapse
See my post above
Mike

i have tried to do this
Type the following commands (do not copy paste!!!)
USB> password 0000000000000000
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
but still not work , please help

any resolution to this matter?
i got the no radio issue... it loads up WM black but then freezes.
have tried the mtty thingy but also get an incorrect password. when i connect via usb i don't see a usb> prompt, just a cmd> prompt.
any advice?
have ipl 1.01 (i recall having 1.04 but seems it downgraded during troubleshooting)
spl 1.40 olipro.

i need help to, i've tried everything!! flash different ROMs radio's EVERYTHING!! some ROM flash but no radio, i try a radio and it will stop at 11% or not at all giving me a error 262. anyother ideas

Same problem.
Same problem here. I cannot flash a operator rom or a radio rom. It hangs at 11-14%. 11% using the sd card method, and 14% for the normal RUU method using an operator rom. Radio roms wont even try to flash, it hangs at 0%. I need to connect too the pc and use Mtty to get the OS Booting.

Hi,i have too same this problem my device is hp ipaq hw6915 how can i fix this?can samebody help?

Help! I am stucked in bootloader mode

Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this

you ARE trying to RUU with a HERALD ruu, no?
Also, if you have a wing or a dopod, you must ruu with the tmobile or dopod variation of the RUU, respectively.

i have HTC herald (not wing or etc) black skin with grey buttons.
i tryed to flash with official wm6 ftom htc.com, and the official wm5, from the net (i dont know the source: RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe)
but, the error is the same: 300, invalid update tool.
my friend sais: my bootloader damaged.
i must get an SD Dump from a HTC herald, same as this device, and then i have a glimmer of hope..
or service repair:|
tmo ruu didnot worked also..
regards
pulyka

try mtty
set 16 0
or set 14 0, I forget which, try both
then do
task 8

Olipro said:
try mtty
set 16 0
or set 14 0, I forget which, try both
then do
task 8
Click to expand...
Click to collapse
I also got one with error 300
I try set 16 0 and set 14 0 both
then task 8,give me
Invalid command : task 8
For a help screen, use command ? or h
....how?

pulyka said:
Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this
Click to expand...
Click to collapse
Help me,I like you

hponline said:
Help me,I like you
Click to expand...
Click to collapse
Hypercore's ROM kitchens has the Herald RUU upgrader... I wonder if that would work...

pulyka said:
Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this
Click to expand...
Click to collapse
I also have the same probem.. after using HERALD-USPL-beta3
beucase I want to change langauge GERMANY to ENGLISH.
PHONE IS HTC HERA100
and having same problem as ABOVE.
NEED SOLUTION.. any comment is will be appreciated
Br.

What is your IPL and SPL in bootloader?
Where did you buy your herald?

oddball1 said:
What is your IPL and SPL in bootloader?
Where did you buy your herald?
Click to expand...
Click to collapse
Its not mine phone.. Its from my Customer he bring phone to me for change language.
before I don't checked IPL / SPL
but after using HERALD-USPL-beta3
NOW IPL IS 1.08.0001 and SPL IS 1.08.0001 is also same.
waiting for the solution..
Br.

DrMobile said:
Its not mine phone.. Its from my Customer he bring phone to me for change language.
before I don't checked IPL / SPL
but after using HERALD-USPL-beta3
NOW IPL IS 1.08.0001 and SPL IS 1.08.0001 is also same.
waiting for the solution..
Br.
Click to expand...
Click to collapse
hello!
Have you ever solved your problem? If yes maybe you can share!!!!!
Or any solution for this yet? Please I need help.
Br
keke

unlucky buying...

hey...
i hope you guys can help me out.
my problem is ,that i bought an herold witch is stuck in the bootloader !
the need little stripes won´t dissapear by any type of reset.
there a so many threads that stroke that a bit... but none only for that specific propblem...
i don´t know by witch method the thing was flashed so i can´t help you there.
i hope
and yes i tried the search
so thanx in advance

You could always try flashing the original ROM. They can all be found here:
http://rapidshare.com/users/5EWZ4
If that doesn´t work it would be helpful to know the SPL version, I can´t tell by the picture the numbers are too small.

OH my god !!
Thx a lot ! for tha fast answer....
but i can try it in a few days....
will post the result then
thx

from looking at the picture you included, I can see your IPL is v1.xx
There have been many people who have permanently bricked their phones by trying to hardspl and uspl ... so make sure you do some research before attempting to do those..

If it goes to bootloader automatically, and it has an SPL of 1.x, it's probably already permanently bricked. Your only option is to bring it to a repair center. Sorry.

i will be back next week on tuesday i think ... then i can look witch spl i have.
hey. and thx for your help already
i am pleased for every hint you have for me !!
could that be a solution for me too ??? ----> http://forum.xda-developers.com/showthread.php?p=1911779

ok...
my SPL is 1.08.0001
IPL the same
i am now trying to reflash the original firmware... lets see...

hm...
invalid flashingtool.... error 300 ????
it says i need a newer flashingtool...... WHAT !!??!?!
i now figured out that it is an italien device.. but the italien firmware also didn´t work...
do anyone has an idea ??? PLEASE....

Like I said, if it's stuck at bootloader and has that SPL, it's probably permanently bricked. Either the Radio or SPL or IPL was accidently overwritten. I was researching and found something that maybe be useful if it's the radio being overwriten but don't have the knowhow to port it to the Herald... yet.

hm...
i just tryed : 1. Kill ActiveSync process - wcescom.exe on your computer.
2. Attach USB-cable to device.
3. Run programm from attach, select "\\.\WCEUSBSH001" from
port's list and click Ok.
4. Type (type himself, not copy/paste) in window:
password BsaD5SeoA(press Enter)
ruurun 0(press Enter)
ResetDevice(press Enter)
and after a hardreset..... the screen went green....so... Step forward or did i now find the perfekt brick procedure
what means a greenscreen ?? btw

so now back in rainbow-mode
is there a way to CID unlock the thing with PUTTY
short before it enters bootmode it displays "searching for sd-card"
flashing from SD-Card ??? possible ???

Hard-splv2 ERROR 262

I try to flash UDK Syrious R0 and he stuck on 17%, after that I can't install anything. I try recover but he stuck at grey screen @ 0% and after 1 minutes hard-spl say to me error 262 communication error. What I can do?

did you hard-spl your device before flash it with this rom ?
if no, you must hard-spl your device before installing any rom
you'll find it there: http://forum.xda-developers.com/showthread.php?t=351964
cheers

Ypritas said:
I try to flash UDK Syrious R0 and he stuck on 17%, after that I can't install anything. I try recover but he stuck at grey screen @ 0% and after 1 minutes hard-spl say to me error 262 communication error. What I can do?
Click to expand...
Click to collapse
I have exactly the same problem. Now I'm stuck in bootloader! Hard reset does not work.
Flashing just stopped at 17%
what now?

I not installed hard spl on my just flash it replug device usb cable he goes to 17% and stuck. I try different rom after that but don't help stuck on 0 %. Hard reset not working.

this post will help you i hope!
http://forum.xda-developers.com/showthread.php?t=381600
cheers

ok, here is what happened:
I copied enterbootloader.exe to sd card and executed it there!!!
Why I did that I dont know, probably I did not understand what means "install" Hard SPL. FCK !!!
So now I'm stuck in bootloader, I cant update rom, coz I cant connect with activsync and Hard reset does not work.
Any help can be apreciated

HELP
ouioui01,
I have readed it, no information about it.

First install Hard-SPL, then upgrade your ROM later. Maybe you can try installing Hard-SPL now?
Edit: maybe this thread can give you more information.

Help for you, when error upgrade ROM...
When error upgrade ROM, try install original roms: http://rapidshare.com/files/9162747....1_radio_sign_25.65.30.04_1.58.21.23_Ship.rar
deechte said:
First install Hard-SPL, then upgrade your ROM later. Maybe you can try installing Hard-SPL now?
Click to expand...
Click to collapse

deechte,
he stucks on 0% and I can't install nothing no HARD-SPL, no cooked rom.

http://forum.xda-developers.com/showthread.php?t=384084
You can do this with a signed ROM. I tried it but it just keeps resetting on me after the color bars show up, you might have more luck.

check if your battery device is more than 50 % charged....

ouioui01 said:
check if your battery device is more than 50 % charged....
Click to expand...
Click to collapse
lol how you can check it if your device is in tri-color mode?

dont know
maybe that will help - if Polaris Trapped in Tri-Colour screen
http://forum.xda-developers.com/showthread.php?t=382447

i have the same problem!!! wity Sysrius WWE
Error 262 (0%) @ Vista Ultimate. Flashing just stopped at 17%.
I can not flash to hardspl V2, No Rom, No Hardreset.
Who can help me please?

I found a solution and I'm preparing a manual for that. I'll post it soon.

whitealien said:
I found a solution and I'm preparing a manual for that. I'll post it soon.
Click to expand...
Click to collapse
You could be the savior of my device.
hey I would be very grateful to you!
greeting

aeroman said:
You could be the savior of my device.
hey I would be very grateful to you!
greeting
Click to expand...
Click to collapse
I'm made new thread with instructions how to solve this problem here.
Hope it will help you.

Good luck you guys.
I feel sorry for you all, but step 1 in udK's installation instructions is to install hard-spl (if you don't have it already) .

[SOLVED] Connection Error [262]. Stuck in bootloader (tri color) mode.

I'm new in these forums as well I'm new with flashing ROMs so obviously I messed up flash process and my device stuck in bootloader (tri-color) mode. This post I address to those unfortunate like me .
# Symptoms #
- ROM flash started and stopped at 17%. After recovery flash process stucks at 0% and pops Connection Error 262. Device is stuck in bootloader mode not possible to flash anything, hard reset does not help, flash from SD card does not help either.
# Possible cause for that #
1. In bootloader mode device shows:
Code:
Pola100
SPL-1.25.0000
CPLD-2
means that Hard SPL was not flashed before flashing ROM file (if Hard SPL was flashed then in second line will be written SPL-2.20.Olinex.).
2. Connection between ActiveSync and device was not established when flashing ROM file.
Before to go any further please take your time and read Polaris Wiki to get familiar with glossary and acronyms used here.
PROCEED ONLY if flashing original ROM does not help, hard reset does not help and flash from SD card does not work.
# Solution #
1. Download MTTY software.
2. Kill ActiveSync (Press Ctrl-Alt-Del and stop rapimgr.exe and wcescomm.exe processes).
3. Plug Polaris into usb port (Plug directly not through hubs).
4. Start MTTY after chose USB from PORT dropdown list (if it is not listed there then ActiveSync processes were not stopped).
5. in window type: set 16 0 (enter cmd mode)
6. after type: task 8 (this will format phone)
7. after type: task 0 (this will restart phone. Not always necessary)
8. soft reset
This procedure can damage your phone. Use it as last resort.
Official source in french here.
Now before flashing any ROMs read carefully how to flash (not install!) Hard SPL.
# P.S. about install and flash termins #
This error with flashing happened to my due misunderstanding between notions of installing something on your device and flashing. In my opinion those are completely two different things. As for first I understand of running some cab or exe directly on device. So problem comes when people sees install Hard SPL en device as they try to find some cabs or exes to install directly on device or they just copy all files to device. To make things clear Hard SPL "installation" actually is ROM flash process which must be done with maximum caution, but those who did not read Wiki won't understand it.
Cheers, whitealien

BiG THX @ Whitealien.
works to 100% on my Touch Cruise.
I flashed under Vista Ultimate...
# Solution # ... addition from me for Vista users!
....
2. Start Windows Mobile Device Center and Deaktivate USB Connection and then start Task manager end kill
Process wmdc.exe.
Rest of whitealien. and have fun!

Thank you!!!!
I had given up on this, and was sure my only option was a warranty repair :O

always welcome

Thanks, you've saved my Polaris.
Mine didn't want to react anymore to the soft reset, so I replaced your instruction 8 with:
Cmd>boot
and that did the trick.

whitealien said:
1. In bootloader mode device shows:
Code:
Pola100
SPL-1.25.0000
CPLD-2
means that Hard SPL was not flashed before flashing ROM file (if Hard SPL was flashed then in second line will be written SPL-2.20.Olinex.).
Cheers, whitealien
Click to expand...
Click to collapse
I had exactly the same problem, for whatever reason went back to original SPL before HARD SPL.
I solved my issue by using back the original original HTC RUU_signed.nbh and flash it using the CustomRUU.
Thereafter, repeat the entire HARD SPL and flash the home cooked ROM.
Cheers.

For unbricking your HTC Polaris, you can try also a hard-reset (if it is related to a software error):
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html

Thank you very much
you really helped
thank you again

mrfone2003 said:
Thank you very much
you really helped
thank you again
Click to expand...
Click to collapse
you are welcome.
Seems people are still falling for this error.

I'm has this error.
Solution (with SPL-2.20):
- kill ActiveSync (process, not uninstall)
- cable to USB on motherboard
- hard reset on phone
- connect to cable
- flash OFFICIAL rom
Two time I revive my Polaris.

help me please
hi.I have a big problem with my htc touch cruise when I installed a hard spl htc dedicate a Diamond.donc I had a white encrant after I did a hard reset since my htc no longer I have a black encrant are neither green nor orange but when I connect with the pc I am data interface and it does not recognized my htc. In my pay is not qualified repairman three non réparé.aidé unable to please me I tried the commands mtty.exe but does not c I do not really know how it works.
thank you for your patience and for help

thanks for the support
Thanks dudes for the great help you gave to recover my htc dual from bootloader screen. I am very happy to have my phone back. Thanks for everybody for the help they have provided generously. I appreciate alot. infact thousands times.

I think i have really messed up my phone. When opening mtty i select USB and press ok, then it says "can not open USB Port"
please help me, i have all the symptoms you explain. Stuck in bootloader, POLA200 SPL-1.25.0000 CPLD-2
i cant flash any roms and the original rom stops at 39%, i have redownloaded it countless times so its not the rom.

aaront1988 said:
I think i have really messed up my phone. When opening mtty i select USB and press ok, then it says "can not open USB Port"
please help me, i have all the symptoms you explain. Stuck in bootloader, POLA200 SPL-1.25.0000 CPLD-2
i cant flash any roms and the original rom stops at 39%, i have redownloaded it countless times so its not the rom.
Click to expand...
Click to collapse
Did you follow all steps from 1st post?
Did you kill all running ActiveSync processes?

I did indeed, i'm on vista so didnt have those particular processes going but followed the step from Aeroman and it still doesn't want to play. Any ideas?

managed to find a working XP machine and it worked a treat. Thank you so much.

thanks,this solved my pb

please help
Im having the same problem, im stuck in the bootloader but i didnt do anything for that to happen....this happened all alone withount any try to flash or do anything
it is saying
POLA100
SPL-1.28.0000
CPLD-2
when this happened i tried sodt reset and unpluging the battery b4 reading and searching here.
now i tried the steps showing in the first post and step by step .... the devise restart to the same bootloader like i did nothing ((( oh god im so upset please help me .... what to do ((((

wesram said:
Im having the same problem, im stuck in the bootloader but i didnt do anything for that to happen....this happened all alone withount any try to flash or do anything
it is saying
POLA100
SPL-1.28.0000
CPLD-2
when this happened i tried sodt reset and unpluging the battery b4 reading and searching here.
now i tried the steps showing in the first post and step by step .... the devise restart to the same bootloader like i did nothing ((( oh god im so upset please help me .... what to do ((((
Click to expand...
Click to collapse
What did you do to get there?

whitealien said:
What did you do to get there?
Click to expand...
Click to collapse
hey, im sorry for the late reply. it didnt notify me and now after posting several times asking for help in many threads by accident i bumped into this thread again to see that u answered and thank you so much.
now, what i did? this is the wierd thing, i didnt do anything, i went and back to see my phone stuck in bootload .... after this i tried almost everything i can find. from ur solution to flashing original rom to hrd spl to .........
now all gave an error except the original rom (polaris.1.28.415.2), it did went to 100% and device restarted to take me to my nightmare .... another bootloader screen am i suppose to search for polaris 1.28.0000?
i still have now the same writing shown.
please help me with this, its a nightmare .... is it totaly dead???
i managed to catch what it is saying b4 bootload screen (only when SD card is in place) it says no image file was found!!! in a very fast way and go to bootloader. in case the sd is not in place nothing happens and it goes straight to the bootloader