Related
I was updating my new i-mate SP3 (typhoon) to the latest i-mate ROM 2.4.33.11 which completed successfully but now every time I turn on the phone it goes directly to the bootloader tri-color screen. I tried several times to update the ROM again but it does'nt help. It shows the proccess completed successfully but the phone is still stuck in bootloader mode.
In the bootloader screen it shows the following
IPL 1.00
SPL 2.5.0102
I even tried to flash the ROM through an image of Orange4114_ALL_SPL1010091 on a miniSD card but it gives an error message
"Not allowed update!"
Please help me figure out how to get my phone working again.
Same PROBLEM here HELP..!
Exactly the same problem if anybody can help ..please do.
spl
hi
same problem my sp3
SPL
Same problem on spv c500 stuck in bootloader but with 2.05.0130 SPL
sp3i stuck
Hi all,
I have the same problem, but I didn't try the mini-sd boot.
surfturtle, will you kindly send me the way?
Thanks
Hi guys...
I don't have the Typhoon and don't know if this will work for you, but this is at least how we fix this problem on the Hermes:
Enter into bootloader using mtty.exe and run the command "set 14 0" and "task 8". Phone will reboot and start OS.
If it doesn't work, then try the SD flash method mentioned by surfturtle. Keep in mind that if your device is not superCID the image file should match the CID of your phone (must be an original shipped update from your vendor). This method consist on:
1) extract the rom image from the rom upgrade exe (winrar or cabextract can be used for that) and you'll find a .nbf file.
2) Rename it to TYPHIMG.nbf
3) Format your SD card in FAT32
4) Put TYPHIMG.nbf on the root folder of your SD card
5) put sd card on the phone, and enter into bootloader
6) confirm flashing on screen, and wait until the process is finished (do not reset it, will take about 30min).
Check the hermes wiki if you need more information on any of this.
Good luck!
sp3i stuck
thanks pof,
but where would I get mtty.exe and where will I see "set 14 0" & "task 8"
thanks again.
Re: sp3i stuck
@Tall_Man: See the hermes wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
I-mate ROM
Hi, I did the upgrade through the PC but the device info still shows the old ROM: 2.1.33.13 No error messages and the phone keeps hanging on me.
Is this version of ROM the Arabic one? If not, can someone post or point to where I can download the arabic version? I did not find it on the I-mate website.
Thanks in advance,
I-mate SP3 (?rom 2.1.33.13)
Hi,
Does anyone knows a method for repairing my old P3300.
The problem is i've tried to upgrade to wm6 and something went wrong,
ATM i only have a screen with the Tmobile logo,
I can open the bootloader, but if i load the bootloader and try to run the official rom update i get the error 122 cannot connect to device.
If i'm in the bootloader and try to start mtty, it all goes as it is supposed to go
I can see the phone in mtty and can get it into flash mode when i enter the bootloader password.
Even when the phone is in this mode the official upgrade won't see the device.
So my question: is there a way to flash/upgrade the rom from mtty?
If yes what are the commands for it in mtty.
If not does anybody know an other solution?
Btw it's a sim unlocked and Cid unlocked P3300 From the Netherlands Tmobile.
IPL 1.13.0001
SPL 1.13.0000
GSM 02.49.90
OS 3.4.0.0
Thanks
Janus
Same here, I think we need the original T-Mobile rom.
RaZoR X said:
Same here, I think we need the original T-Mobile rom.
Click to expand...
Click to collapse
sounds like you did't run the USPL before you burned your Rom, try and do a search on this in the forum, there are plenty of fixes to get your phones up and running again.
another tip, look at the wiki and download Tmobile UK/Ger version, that should do the trick at least to get your phone running, then make sure you do the USPL before you brick it again.
neilhhardy said:
sounds like you did't run the USPL before you burned your Rom, try and do a search on this in the forum, there are plenty of fixes to get your phones up and running again.
another tip, look at the wiki and download Tmobile UK/Ger version, that should do the trick at least to get your phone running, then make sure you do the USPL before you brick it again.
Click to expand...
Click to collapse
I did ran the USPL.
I took a look @ the wiki, but I think those files (all of them are less then 100k) are theme files.
"T-Mobile_NL_MDA_Compact_III_1.13.114.1_NLD_ExtROM"
IPL: 3.13.0001
SPL: 3.13.0000
The USB is working
With the "PDA Phone ROM Update Utility 3.6.3.1." from HTC I tried to get the MDA functional again.
In the Verify the ROM you want to update window it says this:
From:
Image version: -blank-
To
Image version 3.13.405.1
But after 2% sometimes 7%, it says this: "Error [244]:Invaild model ID".
So maybe the USPL didn't went well.
At the Artemis_Upgrades section of the wiki there isn't a T-Mobile file to download. The language doesn't matter to me.
Which device are you guys trying to flash with a new ROM, if its a UK T-Mobile device its not got the WiFi hardware so don't go putting a ROM on the device that expects WiFi support, T-Mobile Artemis units from Holland did have WiFi built in as does the true HTC P3300 unit, the UK T-Mobile device does not - Mike
RaZoR X said:
I did ran the USPL.
I took a look @ the wiki, but I think those files (all of them are less then 100k) are theme files.
"T-Mobile_NL_MDA_Compact_III_1.13.114.1_NLD_ExtROM"
IPL: 3.13.0001
SPL: 3.13.0000
The USB is working
With the "PDA Phone ROM Update Utility 3.6.3.1." from HTC I tried to get the MDA functional again.
In the Verify the ROM you want to update window it says this:
From:
Image version: -blank-
To
Image version 3.13.405.1
But after 2% sometimes 7%, it says this: "Error [244]:Invaild model ID".
So maybe the USPL didn't went well.
At the Artemis_Upgrades section of the wiki there isn't a T-Mobile file to download. The language doesn't matter to me.
Click to expand...
Click to collapse
ok hear'd this one many times before, your running vista >?
try and search the forum, there is a fix for this then your phone.
@Mike it's the "Dutch" version with indeed WiFi
@Neilhhardy
No, I'm not running Windows Vista at the moment.
Me too have the same problem - flash allways stop at 2% , also can`t flash radio - stop at 73-75% - any idea?
the phone is original HTC (have Wi-Fi and not branded) - never CID locked go to bootloader without any problems but can`t flasing - I think case problem is standart HTC flasher exe - for early models have different flasher software - I have Jaf WM but Jaf WM do not support Artemis - did have released other soft that alow flashing Artemis?
P.S - I thing cause right solution is to flash your device with original version - the OEM version that was instaled by factory will fix the problem
this worked for me on a unlocked mda compact 3
format your memory card first with your pc then copy the rom file (nbh)to your memorycard and rename it to ARTEIMG.nbh
start bootloader and follow the instructions.
http://wiki.xda-developers.com/index..._Card_Flashing
rom i used http://makus.folijka.pl/OrbitO2UK.rar
I found the right solution and fix my phone stop at 2% is hapenind when the phone was flashed before cid unlock (bricked) and can be restored ONLY with ORIGINAL version for that phone
1. go to www.htc.com then go to support area and register your headset by they own htc serial number!!! this is most important step!
2. download update soft - the supportsite know what exactly is rirgt version and language for your pda
3. Flash your phone and will be alive
4. USPL and make after that what you want with your headset
TESTED and WORKED for dead phones(but phone must go to the bootloader)
I did a reset with the rec, pwrbutton and resetbutton. And now he's up and running agian with WM6 Haha
I tried to unlock the device with the AthenaUnlocker, but I got this error:
0x0, 0x100000, SPL-verify.nb
I think I killed him lol
ppl said:
I found the right solution and fix my phone stop at 2% is hapenind when the phone was flashed before cid unlock (bricked) and can be restored ONLY with ORIGINAL version for that phone
1. go to www.htc.com then go to support area and register your headset by they own htc serial number!!! this is most important step!
2. download update soft - the supportsite know what exactly is rirgt version and language for your pda
3. Flash your phone and will be alive
4. USPL and make after that what you want with your headset
TESTED and WORKED for dead phones(but phone must go to the bootloader)
Click to expand...
Click to collapse
this may had worked for you but at the HTC website I get the error that my phone is not branded. true it's a tmobile phone...
can you give me the serial number you entered? if you dont trust it you may make the last 3 digits a X
thanks
Janus
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
which is your device,post full data of your phone,IPL/SPL...? Make...?
As you say you installed through Shelltool,is it a G4 DOC chip version ?
You say it's stuck at the splash screen with ipl/spl and gsm version,which splash screen,is it OS (Rom) initial splash screen or a Bootloaders (Multicolored) screen ?
Secondly ,try to get it into bootloaders (multicolor) screen,if it gets into bootloaders,connect it to PC via usb cable,check small usb appears at the bottom of the bootloader mode in the phone,if it does,than flash a carrier's official Rom to recover back to it's default status.
Good luck
Try the Button's ROM (which is in Wizard Upgrading subforum). Then unlock it again (It may be causd by a fake CID unlock when you try to unlock when IPL/SPL is 2.xx)
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
alldoe said:
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
Click to expand...
Click to collapse
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
luoluomeng said:
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
Click to expand...
Click to collapse
Hello! I have CID unlocked. When I install Button ROM my IPL and SPL is the same (1.01). Every RUU works but It still frozen. 2 Days ago i found on other forum this advice:
INSTRUCTION :
1. miniSD - formated in PC - FAT format (now FAT32 !)
2. Wizard On and Bootloader (press reset and keep photo button let go reset) 3 color display. Put in card to Wizard.
3. Connect USB - PCC to PC
4. Launch MTTY 1.42 (my ver.) with USB connection
5. Write command - r2sd os end press enter
6. Program it will record OS on miniSD
7. After recording make Hard Reset or turn on Bootloader
8. On Display should be written - Format partition ?? (5 sec.) - to confirm press Voice dial button. If inscription it will disappear repeat point 7.
9. If Format partition successful wait OS is write. Done.
10. Draw out miniSD
11. Make Hard Reset
12. Enter in bootloader
13. FOR NON CID WIZARD - Flashing Wizard RUU (must be proper version) - ERROR 300 is bad RUU ERROR 266 turn off Wizard and turn on connect to PC
14. With CID (for example CID G4) seek forum for flashing Wizard with CID G4
My Wizard it lives
Click to expand...
Click to collapse
I was carry out all command step by step, and after flashing proper version Orange ROM my Wizard woken up, but today my Wizard get stuck again and now this way don't work, and I have to find a new method to rescue my PDA.
My Wizard woke up! I find ERA PL ROM (RUU_Prodigy_3829_382130_027111_TMO_PL_PLK_Ship) which flash excellent and working, but now I have a new problem. I can install other ROM after that but none of them work, every stucked at Splashscreen like before.I need to find some WM6 ROM which will working? Someone have some suggestion?
alldoe said:
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
Click to expand...
Click to collapse
i have the same proplem but i have a g4 wizard and it's not cidlocked tell me plz what to do plzzzzzzzzzzzz :'(
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
canonyang rulez)))
hate this numbers 1.08.001, as in "lost" film
DONT USE *SPL* (uspl,hardspl,jspl,another) IF YOUR SPL UNDER 4.00.0000
DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse
Send your phone to HTC Service Center, Same thing happend to me and they
changed it under warranty.
In my country there is no service center for HTC.
and phone is come from norway
I need solution. otherwise customer will eat me.
Br.
A. Wahab
Hi DrMobile,
Have you solved your issue? I have the same issue as you...
Please help by sharing with us the solution
Thanks,
Lamnl
same in my mobile error 300
i am still trying the rom without any success. please help
i have the same problem. my phone is showing bootloader , i have ipl/spl 1.08.0001 i tried anythin but nothing worked.
i hope there is a solution with our phones, and someone around here will take a look to our problem.
stuck in bootloader
i have the same problem.
eror 300
pls help
me 2 plz any one can help me 2 plzzzzzzzzzzzzzzzzzzzzzzzz
"those with a SPL lower than 4.0.0.0 or something like that gets bricked. I just wanted to get this first post edited to reflect that so that people don't keep bricking their phones."
(Moderator: whether this is accurate or not I do not know - but use your own discretion)2nd Jan 2008
from another topic, send them for repair
Try this:
http://forum.xda-developers.com/showthread.php?t=343450&page=2
Warranty got back my device back to life
Hi I bricked my device a few days back and tried all the stuff to bring it back to lifee but in vain... I finally gave up my trials and approached the service centre. They just replaced the motherboard inside and luckily everything seems fine now. They hadn't charged me anything as it was within warranty. Anyone in India if you need service centre address..
http://www.asia.htc.com/asia/in/support_sc.html
Though this site says HTC, I got my Dopod C800 serviced there...
Very few questions and cool guys.
Regards,
Murali
Now I think that the reason of non flashing, even with official RUU, could be corrupted CID-block after using HardSPL on devices with low IPL/SPL. I've read thread about similar problem with Wizard. The question is: how to restore the CID block in our bricked devices? I'm not even sure if this theory with CID-block is a reason...
What do you think about such a trick:
- Run RUU on someone's working HTC device but only until the moment, when it wants you to click the last button to finally proceed with flashing. (This step is to let RUU to know that this RUU is correctly dedicated to our device). It's a kind of fake for RUU, cause our CID doesn't match the CID of ROM included in RUU.
- Next disconnect working device from the USB and connect your bricked device with launched bootloader mode
- Next click the final button to launch flashing in RUU application. If the process of CID matching was done before this step, the flasher should start and let us flash our bricked device. But I'm sceptic to this solution. If it was so trivial, everyone could flash his device with different ROMs so easy...
I can't try this trick cause I don't have working HTC. What do you think? Will it work or not?
DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse
D'you mean
working Herald or any HTC?
I have the same prob
I'm thinking about working device, exactly the same as this bricked one - in this case Herald. But all of this is only a theory. I don't have enough knowledge about the RUU flashing process.
My another idea is to swap only ROMUpdateUtility.exe, rapitool.exe and EnterBootloader.exe files from official RUU dedicated to your bricked device, with different versions of these files from another HTC devices just to test if it helps to recognize our bricked devices by RUU. Maybe the problem is wrong version of these files? But which versions are correct?
I'm just trying to find a solution to unbrick our f.....g Heralds . I know this is only a matter of time and soon or later we will know what to do. Moreover I believe that there are people, even on this forum, who know how to unbrick our Heralds but some of them don't want to do us a favour. I know what I'm talking about...
GenePr said:
D'you mean
working Herald or any HTC?
I have the same prob
Click to expand...
Click to collapse
i have the same problem.
error 300
pleas help
have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?
Welcome to the club...
As far as I know, SD flashing doesn't work because of the CID-lock.
tramuyo said:
have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?
Click to expand...
Click to collapse
no, it cant be possible! im not goin to pay HTC Herald
there's a solution, a HOPE... (u try to flash with original flashfile?)
I thinks the solution is to unlock CID from bootloader mode, for old models i did so, but how to unlock Herald's CID
If anyone find a time to help me , about HTC artemis is only stuck on windows mobile screen/logo
..also phone was entering on bootloader mode , three color screen ?
3.15.0000 version T-mobile , but cant fllashing , cant uspl nothing only going to 3% and stopping there.
Any help on this please?
best.r
Hellooooo...
Masters , how to solve this problem , pleasee???????
Radio ROM curropted,
First of all
Try restoring factory settings.
1) PUSH AND HOLD the (-) and (-) buttons over the (ok) and (windows) buttons, then press and hold RESET button.
2) Release reset button. but keep (-) and (-) held.
3) A message will appear and tells you to press SEND to restore factory defaults, SEND = GREEN TEL BUTTON.
4) Press it and wait, see what will happen after, maybe once it's finished you will need a soft reset, I don't remember...
Second Try possibility -if the above will not work-
Try with flashing a new full official ROM
it might be a problem as probably you do not have USPL unlocked!
so your SPL should still be looked to 3,13 or similar.
it would give you a DEVICE ERROR if you update it, and stop at 3%.
if SPL is 1.11 so that's fine, SPL is unlocked.
just enter bootloader and flash any complete (OS + RADIO) Rom, even non factory rom.
if SPL is locked you can save your tel just trying to update and original factory rom.
example: T-Mobile UK, T-Mobile Germany, T-Mobile ....
Note that even if they are all T-Mobile they are different! (Germany is different than UK, and so...)
Desperate last choise
If all the above did not solve,
probably your Radio ROM is curropted and in a bad sector,
use MTTY tool and comands to do a low level format, and remove any residual rom tack.
Do not clean bootloader, you will need it for the new re-flash
Then enter bootloader and flash an official factory rom.
It took me 6,30 hours to save my last Artemis, wish you a quicker solution, so good luck!
mouse.co.nr , thanks for reply mate.
First i have try since from yesterday to give on the phone any fllash , i have try so much diference way to get solution but nothing happen.
The phone cant do a hard reset by presing buttons , the phone was only get on bootloader mode , and was show IPL 3.15.0001 , and SPL 3.15.0000 , and i know that the phone was not cid unlock maybe , but i cant give any upsl and fllashing with fllash that phone.
Second i we try with ART_TMOUK_11311001_024990_WWE_Ship_R3 t=mobile UK , nothing happen , also only radio ARTEIMG_TMO_UK_4.1.13.251_02.92.90_RadioOnly , again nothing.
Radio only , and fllash was going to 3% and stopping.
Artemis_USPL , starting and was going to 100% , but cant finalize i think , bcs ERROR [270]:UPDATE ERROR The image file is corrupted.Please check your update Utility.
..and also i have try to fllash from sd card http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing , i have create one folder with name : root , and i'we put the image ARTEIMG.nbh....but can not starting from sd card also.
i'we download from here all this: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades , and also from official t-mobile.
what of this list is a good RUU for my HTC?
Best.r
root folder
haveri said:
..and also i have try to fllash from sd card , i have create one folder with name : root , and i'we put the image ARTEIMG.nbh....but can not starting from sd card also.
Best.r
Click to expand...
Click to collapse
...probably a problem is creating a folder with the name root, "root folder" means on your sd-card without any folders... as far as i know...
anyway, good luck trying
haveri said:
the phone was only get on bootloader mode , and was show IPL 3.15.0001 , and SPL 3.15.0000
Click to expand...
Click to collapse
SPL still Locked!
two solutions:
1) USPL (proper one) lately I foundout the official one on the official form was giving me some update errors, I think the file is curropted, and if startuspl.exe does not run till 100%, reboot and start the RUU by itself, it wouldn't work if you maually start the RUU once the original launched after USPL gaves the error.
I'm attaching another USPL try this other one...
2) if your pc does not see the PPC for USPL, try not other WWE roms, it should be for your ARTEXXXX, ther is ARTE100, ARTE110, ARTE1000, ARTE200 ...
try more than one till you'll get the 100% rom update.
Radio Only will not work, you are in bootloader, you have an OS problem! if it gives you the "windows mobile image" and stops there, so it's just the radio, else it's the OS and probably the radio!
do a full ROM updt, official WWE have both radio and OS.
I wish for you that your PPC doesn't stop at Windows Mobile Image (the one after boot image), I have thrown away a P3600 in this way!!! Radio was so curropted that I could not fix it anyway, nither MTTY, required a CIP programming, but I'm not good at...
haveri said:
Artemis_USPL , starting and was going to 100% , but cant finalize i think , bcs ERROR [270]:UPDATE ERROR The image file is corrupted.Please check your update Utility.
Click to expand...
Click to collapse
It surprised me the first time I got a 270, try the attached uspl, I got that from the rapidshare, scanned with norton 2010 and is clean, tested today on a german T-Mobile ARTE100 and it worked (now it speaks french!).
haveri said:
..and also i have try to fllash from sd card
Click to expand...
Click to collapse
Will not work, you can not bypass protections just by running SD bootmode!
if it's locked it's always locked!
haveri said:
i'we download from here all this: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades , and also from official t-mobile.
what of this list is a good RUU for my HTC?
Best.r
Click to expand...
Click to collapse
I have no idea, try one of each, in the worst of cases it will always block at 3% and bring you back to beginning, Bootloader mode back again and re-flash..
hope it'll help!
good luck
haveri said:
the phone was only get on bootloader mode , and was show IPL 3.15.0001 , and SPL 3.15.0000
Click to expand...
Click to collapse
SPL still Locked!
two solutions:
1) USPL (proper one) lately I foundout the official one on the official form was giving me some update errors, I think the file is curropted, and if startuspl.exe does not run till 100%, reboot and start the RUU by itself, it wouldn't work if you maually start the RUU once the original launched after USPL gaves the error.
I'm attaching another USPL try this other one...
2) if your pc does not see the PPC for USPL, try not other WWE roms, it should be for your ARTEXXXX, ther is ARTE100, ARTE110, ARTE1000, ARTE200 ...
try more than one till you'll get the 100% rom update.
Radio Only will not work, you are in bootloader, you have an OS problem!
do a full ROM updt, official WWE have both radio and OS.
haveri said:
Artemis_USPL , starting and was going to 100% , but cant finalize i think , bcs ERROR [270]:UPDATE ERROR The image file is corrupted.Please check your update Utility.
Click to expand...
Click to collapse
try the attached uspl, I got that from the rapidshare, tested with norton 2010 and is clean, tested today on a german T-Mobile ARTE100 and it worked.
haveri said:
..and also i have try to fllash from sd card
Click to expand...
Click to collapse
Will not work, you can not bypass protections just by running SD bootmode!
if it's locked it's always locked!
haveri said:
i'we download from here all this: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades , and also from official t-mobile.
what of this list is a good RUU for my HTC?
Best.r
Click to expand...
Click to collapse
I have no idea, try one of each, in the worst of cases it will always block at 3% and bring you back to beginning, Bootloader mode back again and re-flash..
hope it'll help!
good luck
no bootloader possible
hi,
I have tried everything on my T-Mobiel MDA Vario 3.
SSPL-KAIS.exe
JumpSPL 156, 193 and 194
pressing of any keys will not forward me into the bootloader
on my pda is IPL and SPL 3.15
I have also tried HardSPL 329 and 356, no success.
the only way to get into the bootloader is when starting KaiserCustomerRUU.exe, but no ROM is getting installed. I always receive an error 270 file defect. but this is not correct, as I have tested 3 or 4 different files.
does anybody have an idea?
thanks a lot
hds09 said:
hi,
I have tried everything on my T-Mobiel MDA Vario 3.
SSPL-KAIS.exe
JumpSPL 156, 193 and 194
pressing of any keys will not forward me into the bootloader
on my pda is IPL and SPL 3.15
I have also tried HardSPL 329 and 356, no success.
the only way to get into the bootloader is when starting KaiserCustomerRUU.exe, but no ROM is getting installed. I always receive an error 270 file defect. but this is not correct, as I have tested 3 or 4 different files.
does anybody have an idea?
thanks a lot
Click to expand...
Click to collapse
Hi!
Check hardware buttons,maybe one of them is broken,that's why you can't put your device in bootloader.
Make a Goldcard (search) and flash the Kaiser with Goldcard inside.It will revive your device.
BR
Scootie