When i connect my wizard , it's recharging on usb , but activesync it's not connecting with my phone . when i connect nothing is happend :S. please help guys
Did you try another USB port? are you going through a hub? we need a little more info
idbl_fanatic said:
Did you try another USB port? are you going through a hub? we need a little more info
Click to expand...
Click to collapse
yes. i tried another port, and i find solution but with another usb cabel . My 2 cables were not good , so i borrow from friend cable , so now its fine
thanks
if you connect your device and if it is not detected then.
1. Disable your wireless-sync and then try.
2. Go to your Settings > Connections > Usb to Pc and Unckeck advance network functionality.
it should work like a charm.
reply!!
hellboyclub said:
2. Go to your Settings > Connections > Usb to Pc and Unckeck advance network functionality.
it should work like a charm.
Click to expand...
Click to collapse
Finally I found the solution!!!!
Thxs hellboyclub!
Related
Hi... something happended with my Vario II or PC. Now when I connect my Vario II to the USB port, ActiveSync cant find it ('Not Connected') and Windows says: 'USB Device not Recognized'. I reinstalled all software that came with the Vario II, but its now working... Anyone help me, please!!!
Hi Jannen,
I've seen this before - but it usually cures itself after a PC and phone reboot (I would guess you have done this already. The issue appears to be either Windows USB host, your phone or the cable/connections on your USB cable.
I would suggest you try the following and see what happens...
1. On the TyTN goto Start > Settings > Connections > USB to PC - change the setting here from what it currently is.
2. Try a different USB cable if you have one.
3. Try a different USB port on the PC. Possibly on a different USB host if you can do that.
4. On Windows goto Control Panel > System > Hardware > Device Manager - look at the error appearing in the Universal Serial Bus Controllers. This might help identify the problem. Also try re-installing the drivers from here.
5. On the TyTN goto Start > Programs > Accessories > Wireless Modem - ensure this is not active. I think it automatically stops when you exit Wireless Modem but it does change the USB behaviour.
6. Install the latest ActiveSync program on your PC. I'm currently using 4.1 and 4.5 BETA and both are Ok. http://www.microsoft.com/windowsmobile/activesync/default.mspx
Post the response you see to each of the above and it will help diagnose and hopefully fix your issue.
Gav.
Works finally!
Thanks for your help! But took a while to sort it! I tried all those steps, again and again, with no result. I even updated the Active Sync etc. But after a soft boot of my Vario II - its finally working! No idea where the problem was though, one of those Windows mysteries is my guess.... :/
Thanks again!!!
Hello!
The problem is when I connecting the phone to PC with usb cable( tried different ones) it writes me "The device does not support usb headset. please remove it." Cleaning the port and hard reset didn't help me.
I use official rom.
any help will be appriciated.
taypen said:
Hello!
The problem is when I connecting the phone to PC with usb cable( tried different ones) it writes me "The device does not support usb headset. please remove it." Cleaning the port and hard reset didn't help me.
I use official rom.
any help will be appriciated.
Click to expand...
Click to collapse
Try updating usb drivers and then rebooting pc.
thanks for replay but in the page you gave me said that in bootloader when i connect must be writen usb but it still serial... maybe the problem not in the drivers?
taypen said:
thanks for replay but in the page you gave me said that in bootloader when i connect must be writen usb but it still serial... maybe the problem not in the drivers?
Click to expand...
Click to collapse
Have you checked activesync settings? i.e. 'allow usb connections' in connection settings?
Just did a quick search and also found these threads:
http://forum.xda-developers.com/showthread.php?t=533910&highlight=drivers
http://forum.xda-developers.com/showthread.php?t=538018&highlight=drivers
Hi! I've tried searching the forums but I can't seem to find the solution to my problem. I have installed activesync 4.5 on Win XP Sp 2, but when I connect my HTC Touch, it says USB device not recognized and therefore I can't perform a sync. I did a hard reset on the phone but it still won't work. Do I need to download a separate usb driver for the phone? If yes, where can I get it? Thanks.
Have you tried putting the usb wire on different slots of you pC? If still not working borrow a wire from someone and see if still problem arises~. No extra usb driver is req.
ivanmatz said:
Have you tried putting the usb wire on different slots of you pC? If still not working borrow a wire from someone and see if still problem arises~. No extra usb driver is req.
Click to expand...
Click to collapse
Hi! Thanks for the reply. I did try with other cables and it's still not working. I don't think it's the wire or the usb slots because I can sync my other phones, an HTC Magic and a Nokia phone without any problems.
Is there a USB driver for HTC Touch? Maybe that can solve my problem...
Hi
Try Settings/connections/Usb to pc and uncheck everything beside the first option, this is the 1st action I take after flashing.
tito12 said:
Hi
Try Settings/connections/Usb to pc and uncheck everything beside the first option, this is the 1st action I take after flashing.
Click to expand...
Click to collapse
same thing. my phone is still not detected.
Another thought: can you sync over bluetooth? if yes the prob is hardware...
And if nothing works try flashing from SDcard.. That's all I can think of...
Also check the firewall settings too
tito12 said:
Another thought: can you sync over bluetooth? if yes the prob is hardware...
And if nothing works try flashing from SDcard.. That's all I can think of...
Also check the firewall settings too
Click to expand...
Click to collapse
Haven't tried to sync over bluetooth... I can't find my BT dongle. I'll do that once I get hold of my BT. Btw, how do I flash a rom from an SDcard? Thanks again for all the help.
Here: http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing
But try the 2 other options first, did you try to stop all firewalls ?
Whenever i plug in my i9000, it just pop up an error msg ÜSB Device not recognized. I'm trying to get Kies to recognize my i9000
I tried following this but it doesnt work at all.
it worked for me on kies, but i didn;t like it anyways
What i did was go to settings --> about phone --> usb settings
and try the other options (i'm using media player option, not sure why mass storage doesn't work)
Did you try to change the usb ports on your pc (stick the cable into different usb ports)?
Sent from my HTC Desire using Tapatalk
OrbNRG said:
it worked for me on kies, but i didn;t like it anyways
What i did was go to settings --> about phone --> usb settings
and try the other options (i'm using media player option, not sure why mass storage doesn't work)
Click to expand...
Click to collapse
yeah only the media player option was available to me as well.
Mikulec said:
Did you try to change the usb ports on your pc (stick the cable into different usb ports)?
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
changing the usb port does help, however when i unplug it and restart my com, it does not recognize it anymore
What OS are u running?
Could also have something to do with the number of irq's on your motherboard.
PC's older then aprox. 3/4 years have less irq's and can have trouble with much external devices
keevy17 said:
Whenever i plug in my i9000, it just pop up an error msg ÜSB Device not recognized. I'm trying to get Kies to recognize my i9000
I tried following this but it doesnt work at all.
Click to expand...
Click to collapse
Have a look at this site from HardwareZone.com.
It's heavily populated but you only need to read the last five or so pages.
Beards said:
Have a look at this site from HardwareZone.com.
It's heavily populated but you only need to read the last five or so pages.
Click to expand...
Click to collapse
yeah i am looking at that thread too, however thanks for the link here, good for documentation as well, appreciated
keevy17, u have the phone already? If yes, you could help us resolve our questions in last pages of this thread:http://forum.xda-developers.com/showthread.php?t=694835&page=9
Q: Are there any notifications (on screen, backlight of buttons, ...) about missed calls, new mails, sms? Is there any notification when u charge the battery and the battery is fully charged?
Thanks in advance.
The default USB connection is to activate Samsung Kies. You'll have to go to settings->About Phone->USB Settings to change. If it doesn't work after changing, soft reset the phone and try again.
Caused me a bit of head scratching until I went through the options.
Now am having same problem, can'r see mass storage in my computer.
I think I read you need to enable USB Debugging then it will work. for both of you I believe.
With USB debug i can only use adb, nothing works. If i disable debug i can copy files via MTP protocol but mass storage doesn't work.
Edit.
Found the problem, it doesn't mount it self like Desire/N1 i had mount it my self. All working.
hassan said:
With USB debug i can only use adb, nothing works. If i disable debug i can copy files via MTP protocol but mass storage doesn't work.
Edit.
Found the problem, it doesn't mount it self like Desire/N1 i had mount it my self. All working.
Click to expand...
Click to collapse
hassan,
I've not yet had a chance to use the phone yet. Can you tell me how you mount the USB in order to use it with a PC?
Beards said:
hassan,
I've not yet had a chance to use the phone yet. Can you tell me how you mount the USB in order to use it with a PC?
Click to expand...
Click to collapse
It was bit tricky to start with as i thought my phone is broke. First go to setting > About > USB Settings > and select Ask on connection. Plug the cable in to the and from drop down notification bar and hit USB connected then you get the option to mount the mass storage.
hassan said:
It was bit tricky to start with as i thought my phone is broke. First go to setting > About > USB Settings > and select Ask on connection. Plug the cable in to the and from drop down notification bar and hit USB connected then you get the option to mount the mass storage.
Click to expand...
Click to collapse
Thanks hassan, I'll try it later.
If you want kies to work with the phone, dont kill MTP.. But kies is acting weird, soemtimes it doesnt see the phone, but after unplug and replug it works again.. I've given up on kies actually, over 100MB to download and worst than some beta software i've used.
also, i cannot get samsung apps to work on kies, it just error or timeout.. you guys hv any luck?
I haven't tried kies yet, i'll try when i get home from work.
Anybody know how to mount on a Mac? I tried changing the USB settings to Mount/Media, no luck. Any help would be appreciated.
I used to connect my mobile to my laptop using usb but now a days when I connect it only the phone enters the charging mode ..the usb mode connection has disappeared..
I used to connect my phone to myphoneexplorer software using debugging mode..
Please help.
Sent from my GT-I5801 using XDA App
neo1691 said:
I used to connect my mobile to my laptop using usb but now a days when I connect it only the phone enters the charging mode ..the usb mode connection has disappeared..
I used to connect my phone to myphoneexplorer software using debugging mode..
Please help.
Sent from my GT-I5801 using XDA App
Click to expand...
Click to collapse
Hi happened to me too.
Type *#7284#, so you'll enter PhoneUtil and be sure both the "UART" and the "USB" are set on PDA!
zenza86 said:
Hi happened to me too.
Type *#7284#, so you'll enter PhoneUtil and be sure both the "UART" and the "USB" are set on PDA!
Click to expand...
Click to collapse
Thanks a lot.. worked..!!!
neo1691 said:
Thanks a lot.. worked..!!!
Click to expand...
Click to collapse
you're welcome...
Help!
I rooted my Galaxy 3 and since then i can only connect and transfer data between my phone and my computer by allowing USB debug mode. It used to work without a driver installed on my pc (only data transfer mode like with a pendrive), but now my laptop (which doesn't have Kies on it) doesn't recognize it. I tried it with my TV and it said "unsupported USB device". It used to work as a pendrive but now nothing recognizes it:---( Please help:-C
zenza86 said:
Hi happened to me too.
Type *#7284#, so you'll enter PhoneUtil and be sure both the "UART" and the "USB" are set on PDA!
Click to expand...
Click to collapse
Thank you very much!!!
I had this problem today and the first thing I did is what you said... and it worked!
TKS
Linkakos said:
I rooted my Galaxy 3 and since then i can only connect and transfer data between my phone and my computer by allowing USB debug mode. It used to work without a driver installed on my pc (only data transfer mode like with a pendrive), but now my laptop (which doesn't have Kies on it) doesn't recognize it. I tried it with my TV and it said "unsupported USB device". It used to work as a pendrive but now nothing recognizes it:---( Please help:-C
Click to expand...
Click to collapse
Well, you've tried what they said above? About the code and be sure of the UART and USB mode are enabled in PDA? Let us know if you tried.
ya i tried it... worked well!!
USB
Hi to all!
I have a similar problem pls help. I haven't had this before. When I connect to the computer (USB) the phone screen is just blinking with a message INITIALIZATION, and can't connect. Not even in developer mode. And I also tried this *#7284#. Still the same not working. I'll appreciate your help.
Oldfrog said:
Hi to all!
I have a similar problem pls help. I haven't had this before. When I connect to the computer (USB) the phone screen is just blinking with a message INITIALIZATION, and can't connect. Not even in developer mode. And I also tried this *#7284#. Still the same not working. I'll appreciate your help.
Click to expand...
Click to collapse
do u MOUNT your sd card from the notifications bar after connecting your usb???
Neo
Hi! There is no notification bar on the phone screen, because it's blinking. Or you mean this notification should be on the computer?
Thank you in advance!
Oldfrog said:
Hi! There is no notification bar on the phone screen, because it's blinking. Or you mean this notification should be on the computer?
Thank you in advance!
Click to expand...
Click to collapse
Do you mean that the usb initialisation is on when you connect the usb to the computer...
What mode is the usb on?
Eg samsung kies, mass storage etc?
Sent from my GT-I5801 using XDA App
Sorry but there was no notification bar on the phone. Or you mean I should do something on the pc? Now I can connect, but I had to format my sd card. Thank you for your replay!
Oldfrog said:
Sorry but there was no notification bar on the phone. Or you mean I should do something on the pc? Now I can connect, but I had to format my sd card. Thank you for your replay!
Click to expand...
Click to collapse
What he is trying to say, is wich is the default action when you connect the USB.
Example: every time that you connect the USB the phone gets into Kies mode, or Mass Storage.
My G3 is configured to ask what to do...
welty said:
What he is trying to say, is wich is the default action when you connect the USB.
Example: every time that you connect the USB the phone gets into Kies mode, or Mass Storage.
My G3 is configured to ask what to do...
Click to expand...
Click to collapse
U should find it in settings> about phone> usb settings
Sent from my GT-I5801 using XDA App