Database Users

Help!!!! windows can't recognize the device

HELP!
I'm a new to PPC. I've got an O2 mini, I charged the device well just now, but now when I connect the device to my computer, always says that the USB device is not operating well and windows can't recognize the device. Is there anyone could let show me what's wrong? what should I do? Thanks!!!!!

Hello,
Are you sure you have installed Active sync in your Desktop?
Regards
Carty..

Is your USB cable plugged into a front USB port on your computer??
If so, try plugging it into the back. Some front USB ports do not have enough power to recognize the MDA Compact, and you get that same "USB not recognized" error. Most back USB ports are powerful enough.

uninstall activesync ... reboot system install again ! should work

the comupter may of just seen the modem side of it it happened to me you need to go into your hardware file on your pc and delete any modems you don't recogonize (carefull you don't delete the wrong one (i exepct no responsibility if you do)) and then re install active sync v 4.1 fom microsoft site. then plug it in again good luck

Thanks all you guys. I have got this problem resolved. There is sth wrong with my cable and I have bought a new one. Noe everything is going well.

Problem with USB connections

Hi, I seem to be having some trouble trying to update to the latest 6.5 ROM. It says I have a "Error 260: USB Connection".
I also get the same error trying to flash to HardSPL, it says I should make sure it is synced, when it is. I also tried installing the "enablerapinew.cab", and another computer/another cable cord. All the same problems.
I think it may be because in my USB to PC menu, the option to "Enable Advanced Network Functionality" is ticked and grayed out. So I can't untick it.
I tried changing the driver in the registry to the USB Serial driver, but that didn't even sync.
If anyone can help, it would be greatly appreciated.

noctourne said:
Hi, I seem to be having some trouble trying to update to the latest 6.5 ROM. It says I have a "Error 260: USB Connection".
I also get the same error trying to flash to HardSPL, it says I should make sure it is synced, when it is. I also tried installing the "enablerapinew.cab", and another computer/another cable cord. All the same problems.
I think it may be because in my USB to PC menu, the option to "Enable Advanced Network Functionality" is ticked and grayed out. So I can't untick it.
I tried changing the driver in the registry to the USB Serial driver, but that didn't even sync.
If anyone can help, it would be greatly appreciated.
Click to expand...
Click to collapse
Since this is your first post;
Check here.
Tonnes of info on this error.
The alternative is to flash from SD card. Instructions in flashing guide on Wiki.

I'm having the same issue... mine started after i installed a cab file that allows all of myTouchflo screens to have the same wallpaper.... but now my usb connection on th phone does not work. Even in bootloader when i plug in the USB it never recognizes it and i've tried multiple cables and multiple workstations any help here would be great!

Robbienismo said:
I'm having the same issue... mine started after i installed a cab file that allows all of myTouchflo screens to have the same wallpaper.... but now my usb connection on th phone does not work. Even in bootloader when i plug in the USB it never recognizes it and i've tried multiple cables and multiple workstations any help here would be great!
Click to expand...
Click to collapse
Hard reset if nothing else works.
Then you will know whether it is a hardware failure or software related.
I've seen anything from bent pins, lose USB on circuit board, bad cables, Vista vs XP....etc and the list goes on of possible causes for this issue.

Well it still charges and the phone still reads the storage card because i was able to flash it from the card but the computer will not recognize it as a USB device therefore activesync will not work and i cannot access the storage card when its in the phone

Reinstall ActiveSync...maybe...
Regards

Hi!
I have exactly the same problem.
Connecting the TD2 with my PC does not do anything.
Its the same issue with my 2nd PC and othe cables.
Charging works but no USB connection.
I think the USB connector on the Phone is broken.
I allready contacted HTC support but no response yet.
I will post again when ive got some news.
br
wonko

SD-Rom flashing
Hi ya all,
Try to flash it from your SD card, have a look here: http://www.tomlenferink.nl/component/content/article/1-latest-news/77-windows-mobile-65.html
Don't forget for Windows XP you need Active Sync and for Windows Vista and 7 you need Windows Mobile Device Center.

Trying survive from three color screen using MTTY

Problem is that I can't connect my MDA throuhg USB to MTTY app (USB port can not open). I tried in every USB in my computer. And not working...
Any advise?
Ian

johnppol said:
Problem is that I can't connect my MDA throuhg USB to MTTY app (USB port can not open). I tried in every USB in my computer. And not working...
Any advise?
Ian
Click to expand...
Click to collapse
Did you disable USB connections in ActiveSync? MTTY will not recognize the USB if that is active (also, I believe that the device must be placed in bootloader prior to cradling)
Hope this helps.

Same problem here whith my P3600 aka TRIN

Help: USB Device Not Recognized

Hi! I've tried searching the forums but I can't seem to find the solution to my problem. I have installed activesync 4.5 on Win XP Sp 2, but when I connect my HTC Touch, it says USB device not recognized and therefore I can't perform a sync. I did a hard reset on the phone but it still won't work. Do I need to download a separate usb driver for the phone? If yes, where can I get it? Thanks.

Have you tried putting the usb wire on different slots of you pC? If still not working borrow a wire from someone and see if still problem arises~. No extra usb driver is req.

ivanmatz said:
Have you tried putting the usb wire on different slots of you pC? If still not working borrow a wire from someone and see if still problem arises~. No extra usb driver is req.
Click to expand...
Click to collapse
Hi! Thanks for the reply. I did try with other cables and it's still not working. I don't think it's the wire or the usb slots because I can sync my other phones, an HTC Magic and a Nokia phone without any problems.
Is there a USB driver for HTC Touch? Maybe that can solve my problem...

Hi
Try Settings/connections/Usb to pc and uncheck everything beside the first option, this is the 1st action I take after flashing.

tito12 said:
Hi
Try Settings/connections/Usb to pc and uncheck everything beside the first option, this is the 1st action I take after flashing.
Click to expand...
Click to collapse
same thing. my phone is still not detected.

Another thought: can you sync over bluetooth? if yes the prob is hardware...
And if nothing works try flashing from SDcard.. That's all I can think of...
Also check the firewall settings too

tito12 said:
Another thought: can you sync over bluetooth? if yes the prob is hardware...
And if nothing works try flashing from SDcard.. That's all I can think of...
Also check the firewall settings too
Click to expand...
Click to collapse
Haven't tried to sync over bluetooth... I can't find my BT dongle. I'll do that once I get hold of my BT. Btw, how do I flash a rom from an SDcard? Thanks again for all the help.

Here: http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing
But try the 2 other options first, did you try to stop all firewalls ?

[Q] Problems with Magldr installation

I dont get a usb connection to my omnia 7
I tried it on 3 pcs 1 with 64bit 2 with 32bit and all usb ports
On all pcs I installed the usb driver
All pcs recognize my phone but the software gives this error:
[Error Description]:
Please make sure that your device is connected to your computer.
also make sure that right drivers are installed (SAMSUNG_USB_Driver_for_Mobile_Phones.exe)
Try to connect device to different USB port and also you can try to reboot PC.
Also you can try to exclude USB hubs.
[Info]: USBWorkDMLI_SAM.cpp (173)
anyone knows what i am doing wrong ?
regards chris

Hi,
I have exactly the same problem as chris1005, with an Omnia 7.
I strictly followed the instructions to install Magldr:
1) Installing Usb Samsung Drivers
2) Put my phone in download mode
3) Connect it to my pc
4) Launch "DMLI for Samsung V1"
And when i reach the "Connect" step, i get the "173" error (view attachment).
I run on a Win7 x64, my phone is developer unlock.
Thanks for the answers

I had the same problem, but it was solved when I used a USB port on the back (connected to the motherboard) instead of one on the front (connected trough a hub).

Hi,
Thanks for your response, but i tried this method, it doesn't work too, whether the usb on motherboard or the usb hub.
:/.
I don't know where this is blocking.
Is there any other solution to flash a rom on an Omnia 7 than the DFT solution ?
Thanks.

I flashed back from 7.8 to 7.5 and had the same problem again, but ater I rebooted my computer, it worked.
Try to follow this: http://windowsphonehacker.com/articles/tutorial_how_to_install_magldr_and_custom_roms_on_samsung_devices-02-08-12

NdotGdot said:
I had the same problem, but it was solved when I used a USB port on the back (connected to the motherboard) instead of one on the front (connected trough a hub).
Click to expand...
Click to collapse
I tried every usb port on my Pc still doesnt work
tried everything mentioned on xda dev about the problems with the magldr
regards chris