[Q] Problems with Magldr installation - Omnia 7 General

I dont get a usb connection to my omnia 7
I tried it on 3 pcs 1 with 64bit 2 with 32bit and all usb ports
On all pcs I installed the usb driver
All pcs recognize my phone but the software gives this error:
[Error Description]:
Please make sure that your device is connected to your computer.
also make sure that right drivers are installed (SAMSUNG_USB_Driver_for_Mobile_Phones.exe)
Try to connect device to different USB port and also you can try to reboot PC.
Also you can try to exclude USB hubs.
[Info]: USBWorkDMLI_SAM.cpp (173)
anyone knows what i am doing wrong ?
regards chris

Hi,
I have exactly the same problem as chris1005, with an Omnia 7.
I strictly followed the instructions to install Magldr:
1) Installing Usb Samsung Drivers
2) Put my phone in download mode
3) Connect it to my pc
4) Launch "DMLI for Samsung V1"
And when i reach the "Connect" step, i get the "173" error (view attachment).
I run on a Win7 x64, my phone is developer unlock.
Thanks for the answers

I had the same problem, but it was solved when I used a USB port on the back (connected to the motherboard) instead of one on the front (connected trough a hub).

Hi,
Thanks for your response, but i tried this method, it doesn't work too, whether the usb on motherboard or the usb hub.
:/.
I don't know where this is blocking.
Is there any other solution to flash a rom on an Omnia 7 than the DFT solution ?
Thanks.

I flashed back from 7.8 to 7.5 and had the same problem again, but ater I rebooted my computer, it worked.
Try to follow this: http://windowsphonehacker.com/articles/tutorial_how_to_install_magldr_and_custom_roms_on_samsung_devices-02-08-12

NdotGdot said:
I had the same problem, but it was solved when I used a USB port on the back (connected to the motherboard) instead of one on the front (connected trough a hub).
Click to expand...
Click to collapse
I tried every usb port on my Pc still doesnt work
tried everything mentioned on xda dev about the problems with the magldr
regards chris

Related

Help!!!! windows can't recognize the device

HELP!
I'm a new to PPC. I've got an O2 mini, I charged the device well just now, but now when I connect the device to my computer, always says that the USB device is not operating well and windows can't recognize the device. Is there anyone could let show me what's wrong? what should I do? Thanks!!!!!
Hello,
Are you sure you have installed Active sync in your Desktop?
Regards
Carty..
Is your USB cable plugged into a front USB port on your computer??
If so, try plugging it into the back. Some front USB ports do not have enough power to recognize the MDA Compact, and you get that same "USB not recognized" error. Most back USB ports are powerful enough.
uninstall activesync ... reboot system install again ! should work
the comupter may of just seen the modem side of it it happened to me you need to go into your hardware file on your pc and delete any modems you don't recogonize (carefull you don't delete the wrong one (i exepct no responsibility if you do)) and then re install active sync v 4.1 fom microsoft site. then plug it in again good luck
Thanks all you guys. I have got this problem resolved. There is sth wrong with my cable and I have bought a new one. Noe everything is going well.

Problem with USB connections

Hi, I seem to be having some trouble trying to update to the latest 6.5 ROM. It says I have a "Error 260: USB Connection".
I also get the same error trying to flash to HardSPL, it says I should make sure it is synced, when it is. I also tried installing the "enablerapinew.cab", and another computer/another cable cord. All the same problems.
I think it may be because in my USB to PC menu, the option to "Enable Advanced Network Functionality" is ticked and grayed out. So I can't untick it.
I tried changing the driver in the registry to the USB Serial driver, but that didn't even sync.
If anyone can help, it would be greatly appreciated.
noctourne said:
Hi, I seem to be having some trouble trying to update to the latest 6.5 ROM. It says I have a "Error 260: USB Connection".
I also get the same error trying to flash to HardSPL, it says I should make sure it is synced, when it is. I also tried installing the "enablerapinew.cab", and another computer/another cable cord. All the same problems.
I think it may be because in my USB to PC menu, the option to "Enable Advanced Network Functionality" is ticked and grayed out. So I can't untick it.
I tried changing the driver in the registry to the USB Serial driver, but that didn't even sync.
If anyone can help, it would be greatly appreciated.
Click to expand...
Click to collapse
Since this is your first post;
Check here.
Tonnes of info on this error.
The alternative is to flash from SD card. Instructions in flashing guide on Wiki.
I'm having the same issue... mine started after i installed a cab file that allows all of myTouchflo screens to have the same wallpaper.... but now my usb connection on th phone does not work. Even in bootloader when i plug in the USB it never recognizes it and i've tried multiple cables and multiple workstations any help here would be great!
Robbienismo said:
I'm having the same issue... mine started after i installed a cab file that allows all of myTouchflo screens to have the same wallpaper.... but now my usb connection on th phone does not work. Even in bootloader when i plug in the USB it never recognizes it and i've tried multiple cables and multiple workstations any help here would be great!
Click to expand...
Click to collapse
Hard reset if nothing else works.
Then you will know whether it is a hardware failure or software related.
I've seen anything from bent pins, lose USB on circuit board, bad cables, Vista vs XP....etc and the list goes on of possible causes for this issue.
Well it still charges and the phone still reads the storage card because i was able to flash it from the card but the computer will not recognize it as a USB device therefore activesync will not work and i cannot access the storage card when its in the phone
Reinstall ActiveSync...maybe...
Regards
Hi!
I have exactly the same problem.
Connecting the TD2 with my PC does not do anything.
Its the same issue with my 2nd PC and othe cables.
Charging works but no USB connection.
I think the USB connector on the Phone is broken.
I allready contacted HTC support but no response yet.
I will post again when ive got some news.
br
wonko
SD-Rom flashing
Hi ya all,
Try to flash it from your SD card, have a look here: http://www.tomlenferink.nl/component/content/article/1-latest-news/77-windows-mobile-65.html
Don't forget for Windows XP you need Active Sync and for Windows Vista and 7 you need Windows Mobile Device Center.

[NEED HELP] USB not Recognized

hey guys, i have problem when i plug my magic into my laptop..
it always said "usb not recognized"
i use windows 7 32-bit
i have tried to install android-usb driver but windows system can't detect the driver (android_usb.inf, androidusb.sys, androidusb86.cat, WdfCoInstaller01005.dll)
i try to change the usb cable but still doesn't work
what should i do?
Tried installing HTC sync? That usually fixes the driver problems.
Either that, or try installing HTC Sync AND THEN the USB Driver cable. That worked for me, or try the newest HTC Sync available.
WHere can I install HTC Sync from? I'm having the same issue's, I never had this problem before..
so after installing HTC Sync I'm still havng the same issue, this is the message I'm getting..
"One of the USB Divices attached to this computer has malfunctioned, and windows does not recognize it." any suggestions?
nooty90 said:
hey guys, i have problem when i plug my magic into my laptop..
it always said "usb not recognized"
i use windows 7 32-bit
i have tried to install android-usb driver but windows system can't detect the driver (android_usb.inf, androidusb.sys, androidusb86.cat, WdfCoInstaller01005.dll)
i try to change the usb cable but still doesn't work
what should i do?
Click to expand...
Click to collapse
I have the same problem. Both my windows 7 pc and linux netbook both used to display the magic as a mass storage device (all I need), but now neither will do it. As both fail to detect the magic I've come to he conclusion there is something missing or corrupted on the magic - probably after me pulling the usb cable too soon!
I've reinstalled the rom, ticked usb debugging etc, yet still no joy. The pc initially gave an error code 43, but now it does nothing. could somebody help please.
DML08 said:
so after installing HTC Sync I'm still havng the same issue, this is the message I'm getting..
"One of the USB Divices attached to this computer has malfunctioned, and windows does not recognize it." any suggestions?
Click to expand...
Click to collapse
I tried two htc syncs, neither worked. Thats why I think its an issue related to the phone rather than the pc. Is it related to unmounting the sd/not unmounting the sd at the appropriate/inappropriate time??
All I get is:
usb not recognised - One of the USB Divices attached to this computer has malfunctioned, and windows does not recognize it..... then when i click on the attached usb info it states ' Windows has stopped this device because it has reported problems. (Code 43)'
i already haved this issue its hardware issue sendit to warranty

this usb device can perform faster if you connect it to a Hi-speed USB 2.0 port

My problem is little weird so i try to explain it as best as I can...
until today there was no problem to connect phone with USB but now when i connect the phone windows said "This device can peform faster this usb device can perform faster if you connect it to a Hi-speed USB 2.0 port. And another problem is when i turn phone into download mode start odin and connect the phone it said... usb device not recognized. I didnt flash any rom yet and i try different cables.
I am running on windows 7 ultimate 64-bit. I try two different PC and its look it the same problem.
But the weird part is that on third PC which has also win 7 ult 64-bit it works just fine.
So i try reinstall operation system but the same problem. The computer is max 3 years old so its has for sure usb 2.0
So i am little desperate because i am not sure if its problem with computers or with the phone.
Thank you for any advice!
I always had this problem with the i9100 actually, I blame crappy usb drivers.
Kies installed? Did you also try different usb ports? Chipset and USB Drivers of mainboard installed?
yes kies installed and also try back and front usb... but same result...
and usb drivers are installed manually by windows as far as i know... or?
Bladik said:
My problem is little weird so i try to explain it as best as I can...
until today there was no problem to connect phone with USB but now when i connect the phone windows said "This device can peform faster this usb device can perform faster if you connect it to a Hi-speed USB 2.0 port.
Standard Windows message for USB connections just means what it says .
And another problem is when i turn phone into download mode start odin and connect the phone it said... usb device not recognized.
Download mode how and whats on the phone in download window
Connection must be to a mainboard usb port .
If your PC has Kies make sure its not running make sure USB debugging is off on phone .
Power phone off restart start Kies connect phone does Kies see phone .
If yes turn Kies off remove cable connect phone in USB mass storage mode wait for windows to install drivers . Does PC see phone in Windows Explorer .
jje
Click to expand...
Click to collapse
yes windows explorer works
and kies also but still in usb 1.0 mode...
as I said I tried back usb and also front usb... same problem...
debugging is also off...
I try a little experiment... removed external grahics card and plug graphics on mainboard... and for a few seconds its works!
I try copy some video and speed was usb 2.0 but after few seconds its get error cannot copy bla bla and windows popup : this device can run faster and it change back to USB 1... weird...
and also i try again downloading mode but the same error... usb device not recognized...
Have you always used the same USB-port?
On some pc's, they only have one or two high speed ports and the other ones are "slow".
So yeah, try an other USB port on your pc
Sent from my GT-I9100 using XDA App
OP, I am confident it is a problem with your PC, and this XDA forum won't be able to help.
Try using another USB 2 device (like an MP3 player), see if you get the same message.
Use a different computers with the SGS2, see if you get the same message.
Bladik said:
yes windows explorer works
and kies also but still in usb 1.0 mode...
Thats your PC port USB 1
I try a little experiment... removed external grahics card and plug graphics on mainboard... and for a few seconds its works!
USB port not getting enough power .
Its PC not the phone explore sees phone and Kies sees phone = USB drivers ok
USB ports are not all usb 2 check your manual .
You can try factory reset on phone this will wipe all data .
jje
Click to expand...
Click to collapse
i tried all usb ports...
also i am using external hdd everyday i never had a problem
my mainboard is asus m3n78pro and there are usb 2.0 for sure...
how is possible to not get enogh power to usb when etc. like external disk just fork fine... ?
Bladik said:
i tried all usb ports...
also i am using external hdd everyday i never had a problem
my mainboard is asus m3n78pro and there are usb 2.0 for sure...
how is possible to not get enogh power to usb when etc. like external disk just fork fine... ?
Click to expand...
Click to collapse
Use a mainboard USB port they are USB 2 but it matters not a jot about 1 or 2 .
jje

[Q] Trying to flash CleanRom but I get error (Samsung Focus)

I have a Samsung Focus 1.3 and I am trying to Install Clean ROM 3.0.
I believe I have all the proper drivers installed on my computer (Samsung USB, WMDC) I have installed MAGLDR 2.00 on the phone and I can enter MAGLDR mode by pressing volume down + cam + power. Upon pressing back it says "Wait USB" and as soon as I connect I see "USB! CMD connected"
However, when I run DWPI I get the following error:
Please make sure that your device is connected to your computer.
also make sure that right drivers are installed (Active Sync or Windows Mobile Device Center)
Try to connect device to different USB port and also you can try to reboot PC.
Also you can try to exclude USB hubs.
[Info]: USBWorkDWPI.cpp (136)
Click to expand...
Click to collapse
I am running Windows 7 32 bit but I seem unable to get past this point. Would you please help me figure out how to get this working?
Thanks
avivasa said:
I have a Samsung Focus 1.3 and I am trying to Install Clean ROM 3.0.
I believe I have all the proper drivers installed on my computer (Samsung USB, WMDC) I have installed MAGLDR 2.00 on the phone and I can enter MAGLDR mode by pressing volume down + cam + power. Upon pressing back it says "Wait USB" and as soon as I connect I see "USB! CMD connected"
However, when I run DWPI I get the following error:
I am running Windows 7 32 bit but I seem unable to get past this point. Would you please help me figure out how to get this working?
Thanks
Click to expand...
Click to collapse
Did you do the obvious and install Activesync/Windows Mobile Device Center? Did you try a different USB port? Did you try a different USB cable?
Testware said:
Did you do the obvious and install Activesync/Windows Mobile Device Center? Did you try a different USB port? Did you try a different USB cable?
Click to expand...
Click to collapse
I did try that and that was not the issue - I think the issue might be related to the following:
I use this computer for remote debugging on other platforms. A tool I have installed (Trace32) includes bunch of drivers for different platforms and I realized that when I connected the phone in MAGLDR mode the driver that it took was one from Trace 32 (It said WEA Device instead of Microsoft USB Sync). Either way, I forced it to use Microsoft USB sync but even after restarting it would appear as connected in device manager but DFT_WPI_SAM1 would not recognize it and give me the same error. I'm thinking it has something to do with the fact that there are multiple drivers that match the same device.
I finally decided to use my 64 bit Win8 machine, and I was able to flash it without a problem.

Categories

Resources