I have a hw6915 G4 flash chip, 1.21UK.00 ENG ROM Version. The ipaq has a strange behaviour: right after a hard (clean) reset, I add a new IMAP account (for HP e-mail), download the mails and do a soft reset. After the reset, the entire account is gone - I have to start all over again with account creation.
Any idea what happens? I've tried to do a ROM update, but I couldn't find the Eng ROM image.
Thanks for help,
Radu
Related
After every soft reset, my pop3 email account disapear.
Could anybody help me ?
You probably have this problem along with a "no gsm" appearing on the screen after a soft reset (where the rom version should be), no IMEI number on your phone details (somewhere in settings I believe) and your WAP/GPRS settings gone.
check this topic: http://forum.xda-developers.com/viewtopic.php?t=36730&highlight=
read till the end for a solution:
akpe said:
Now, I think I've found a way to overcome the "no gsm"/vanishing IMEI/vanishing WAP/GPRS user-pass/etc problem, so you won't need to enter your email accounts again...ever...
After I uninstalled some programs and soft reseted it gave me a "no gsm" again... I hard resetted using the stulys as fast as I saw the "no gsm" during the boot, and kept resetting until it booted normally. When I went to check my network connections, usernames and passwords were still there... plus on sync it did not ask me again for my exchange password...
Again: always soft reset using software buttons (like SPB pocket plus) and any time you soft reset be ready to reset again if a "no gsm" appears where your ROM version should
I can't explain it but I believe it has to do with not letting WM5 boot up in "no gsm" mode :roll:
Click to expand...
Click to collapse
the new qtek/imate rom with AKU2 seems to solve the problem
Hi,
I am writing because I have some problem with my Qtek S200.
I have downoladed on this site a new ROM wm6pdamobile, I have installed it, and now my pda is blocked on a white screen.
When it starts appears the normal HTC page, the check of OS, GSM etc., and then.... nothing... only a white screen.
What I can do?
How I can format my pda? It doesn't works with active sync, because it can't take a valid IP, and so I can't reinstall a precedent ROM version.
Please help Me!!!!
Thanks
It is important to hard-reset your device after upgrading. Have you done hard reset? If not do it.
mine oso
i have installed WM6
i had hard reset..
but.. it goes to Align Screen
and stuck !!!
looool, u must reinstall a new rom.. dont ask me how..
Hi to all!
I`m new in this forum and ba world.
Last week purchased spv m2000 with wm2003se and simlock. After reading wiki I unlocked SIM, unhided an unlocked EXTRom , resized DOC and upgraded to latest radio rom and wm6 (thx Helmi for great job).
I did also some set up things in wm6, for example password (something like - "if device is unsed for 30 min. you must insert password") same as my PIN.
My battery after whole day of exploring new features and programs became week (10% - you may loss your data..., etc) and I decided to push power button and replace with another one. But I forget that other one is also week (5%). After soft reset and booting wm6 asked me for a password to unlock system - and I was surprised coz wm6 told that password is incorrect - apparently lost all my settings.
Hard reset and boot options helped with sweeping whole system. So I must now install again all programs and patches.
I don`t know if this is normal wm6 behaviour (I`ve read wm6 is data lost proof - this feater was major cause of upgradind) or I did something wrong with switching batteries.
Best regards
I do confirm this problem.
If unlock password was set,after you changed the battery,in the first boot the phone would be No radio,so you should reset it again.Then the problem came,all the password you typed was incorrect,you could not get into the desktop.
Even after you hv hard reset your phone.You will also need to clean the registry,that is incredible.
Can any one figure out it?
It is a serious problem.
Same problem
I have just the same problem that with my PDA2k. I upgraded to WM6 and put in a Phone Password. When I came to reboot the device and enter the password, it was not recognizing it ( tried to hard reset etc but still got stuck on the Password screen no matter what I do?
Any help on this pls pls?????
thanks
MercuryCube
Trinity P3600 have this problem too
Hello, I just got the same trouble on WM6 Trinity P3600 (AXL ROM from 2007-08-30). So possibly this is common DOPOD ROM bug?
Also have the same problem with XDA IIs. Tried to reload the new ROM but the enter password is still there. Any other solution?
Solution Found!
You find the solution here:
http://forum.xda-developers.com/showpost.php?p=1164331
)
Thanks it worked perfectly
100 points !!!!
this is called hard reset it wipes all of your installed software and settings. it is like freshly installed windows
Dear Xplode , what on earth is the reason behind the blocked password and reseted clock if u remove the battery ? ( backup batter working ). Another question , any idea if i can use a 3rd party application replacement for the Lock application ?
Karim.
prophet upgraded with wm6 hv this problem too
One easy tip
Before you replace the battery, turn off security lock on device. Works for me and is not too.... much hassle.
i forgot my password after upgrade my wm5 to wm6. i tried to to use spl to flash my phone but my pc cant open my device because my device is locked so the activsync cant do anything.
someone can help me plz!!!!!!!!!!!
*edit* i try to hold the camera and com man buttons adn the same time and press reset button. but it doesnt change
Firstly, I can't see how resetting the device will help you with your problem.
Secondly, how far into a reset do you want to go? Do you want to reinstall the OS or something slightly less drastic?
i just want to open my password. then i will upgrade my phone to wm6 with PIN
Did you set a password after flashing WM6? I've heard that if you do so, your device forgets your password after a soft-reset, and nothing will help your problem besides a hard reset.
Hi All,
Got me a P3400i a few days ago, and tried the usual trick of hard reset, followed by soft reset to get a clean vanilla WM6 setup, without all the HTC Custom stuff, but the phone just goes back to the main screen with "Tap here to setup your Windows Mobile device"
Have any of you encountered this as well?
Is there any other sequence to be followed to get RID of all the HTC stuff in the extROM?
jamichy said:
Hi All,
Got me a P3400i a few days ago, and tried the usual trick of hard reset, followed by soft reset to get a clean vanilla WM6 setup, without all the HTC Custom stuff, but the phone just goes back to the main screen with "Tap here to setup your Windows Mobile device"
Have any of you encountered this as well?
Is there any other sequence to be followed to get RID of all the HTC stuff in the extROM?
Click to expand...
Click to collapse
I think improper extROM setup may cause a bad battery drain
SOLVED
Sorry, my bad....
It seems I had to do the soft reset before the customisation started. Its working fine now
Hard-resetting...... how?
I have tried pressing the reset button time and again but of no use. Problem is, my messaging option just doesn't appear. I mean, it's there, but when clicked, doesn't activate. Please help. It's been about a month since I bought the HTC p3400i
If your phone is patched or if you are ready to patch it (thus loosing your warranty), you can always get a custom rom with smaller, empty extrom. Or if you like to have the original ROM, get the original WM 6 ROM from this forum and the tool HTC ROM Image Editor, remove extrom.nb from the ROM and inject the 4 MB, empty version of extrom into it. YOu can get it by requesting any of the chefs here, including me