Database Users

Dutch to english ROM

Hey guys,
Im another newbie, but who is actually scared of screwing up the phone. I have the Tmobile MDA compact III obviously, and the information page looks like this:
ROM version 1.13.114.1 NLD
ExtRom version 1.13.114.101
Model nr ARTE 110
CPU OMAP850
Im not so sure what this information tells you people who are knowledgable about this, however can I safely use the customised powermap file from this website's ftp (ftp://ftp.xda-developers.com/Artemis/Customized_ROMs/) to change the phone to english?
What are the procedures EXACTLY please, and what problems should I expect.
Another thing, what is CID lock, and how can I see if mine is or not?
I checked most of the threads, so I am knowledgable about this issue a bit, however because none of the topics were specifically about the Dutch version I wanted to make sure. Thank you a lot for your help...

1. you have to CID unlock your phone. only real solution is imei-check website, and that will cost you $40. this will prevent MANY of the problems with installing ROMs
2. don't do updating on Vista PC, use XP or older
3. follow on screen instructions of your chosen ROM update utility. don't panic if it takes too long and looks like the update process has "freezed". make yourself a coffee and let it finish installing.
4. enjoy!
PS... i strongly suggest you read as much as you can on this forum before doing any upgrading.... then you'll know what to expect.... and of course, don't forget that only YOU are responsible for anything that happens to your device, good or bad... good luck!

hey dim4x4,
thanks for the post, I appreciate it. However is the exe file I mentioned (customised power map) the right one? i know there are a few options to chose from, like the 3 options of the pdamobiz.com website. While im not too clear of the main differences, the general concensus on the forum is that the powermap is preferred, and has a lot of nice things. Is there a better one? perhaps on a different ftp. Maybe if you have one you can send it to me.
Another thing, if it dont work, or works and I dont like it, can I get back to my original ROM, the dutch one from the tmobile dutch file on the ftp site as well?
Thanks

1. Personally, I use PDAmobiz Lite version. Powermap version has a map of Thailand which I don't need. "A lot of nice things" for my purpose is a lot of unnecessary stuff. If I need something I can install it myself into RAM or storage card. You have to choose the version which suits you best.
2. Everything is on this server. You have to register to log in http://www.wm-gurus.com/registration/signup.php
3. I went back and forth with different ROMs (versions, languages, etc.) without any problem until I found more or less what I want. Please note, my device is CID unlocked by imei-chek.
Good luck!

Urgent Help
I tried the powermap version of the ftp. This is exactly what I did:
I connected the phone and established contact through activesync, then I started the exe file. The DOS windows opened, and then it started initialiying, and the process started. It said that it will take 15-30 mintues, and the process has started. So far im sure everypone is familiar with those. However, I waited about 35-40 minutes, and still nothing different on either screens. The DOS window said however that if nothing starts I should reset the process. I tried but didnt work. At that time I tried to reset the phone and now it is stuck in the startup screen. All I see on it is the IPL/OS data, and it is not moving further.
Please help, what do I do now?

So this is what I did so far....
1. Flashed with PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.exe (with device on Today screen)
2. The process started and stuck on "uploading file [don't remember] and as the instruction said I reseted the phone after 30 minutes.
3. All there is on is T-Mobile splash screen, version infos and that's it.
5. Tried to flash again in bootloader mode but the device was not visible by PC
How do I go from here? Maybe I need to flash the original rom version of the phone. I have the dutch tmobile mda compaxt III, but with the dutch ROM version on the ftp of this site is scary, because there are too many files and have no clue which one to flash.
Any suggestions?

There is no Dutch T-Mobile ROM available yet.
You could try the English T-Mobile ROM (art_tmouk_11311001_024990_wwe_ship.exe), which is available on this site: http://www.wm-gurus.com/registration/signup.php
There's a chance this ROM will work on your Dutch T-Mobile phone, if the signature is correct (I assume your phone is still CID locked).
Read this link http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets on how to enter the bootloader of your phone.

mRmAGIC...
I Tried That Already; But I Got An Invalid Id: So I Dont Know What Else So Far: Do You Think I Have To Cid Lock The Phone To Be Able To Try The Other Versions?

tghobar said:
I Tried That Already; But I Got An Invalid Id: So I Dont Know What Else So Far: Do You Think I Have To Cid Lock The Phone To Be Able To Try The Other Versions?
Click to expand...
Click to collapse
CID unlocking isn't possible if your phone isn't working.
If you don't have your original rom, you have to contact your provider to repair it.

try from bootloader screen
Hi I also did as u did but with a hards reset in the beginning.And it worked fine.read somewhere that if u dnt do a hard reset you could get into problems.If u can try to go to bootloader screen and try to flash from ther.

flashing from the bootloader screen gives me an error, the file cannot recognize that a phone is connected to the PC. that is the biggest problem I think.
DO you know how to flash the Tmobile NL version on the ftp. there is one that I dont know how to use

Newbie To Mda

I just got a TMobile MDA, and am brand new to this. I tried upgrading thru TMo site, but couldn't get Windows Mobile 6.0. Still have ROM 2.26.10.2; Radio 02.25.11; ExtROM 2.26.10.105. Anyway, I tried SNN Ver 2.o off of this site and it wouldn't upgrade. Any help from anyone before I start looking through site. Just looking for direction and a helping hand before I fry my MDA. Thanks to one and all. Looking forward to making great use of the site.!!!

Look here first
http://forum.xda-developers.com/showthread.php?t=298613
You will need to make sure that your phone is unlocked before you can proceed with any upgrades to wm6
Check out the Wizard Wiki also - lots of great info
Remember - you are on your own, you are responsible for any issues with your phone. But, if you read the sticky posts here, and on the wm6 wizard board - the directions, while extremely detailed - are right on.
Read, understand, and when you are ready to proceed - do not skip a step, and if the directions tell you to flash something, or upgrade something twice - it is for a reason - do it twice.
Good luck

mucho thanks
Much appreciated. Don't know if phone is unlocked, but like you said ... will read everything twice. Thanks alot. One more thing ... can you guide me to info on how to find out if fone unlocked ... or how to do so. Once again, thanks. Looking forward to using the info.

Loudaman said:
Much appreciated. Don't know if phone is unlocked, but like you said ... will read everything twice. Thanks alot. One more thing ... can you guide me to info on how to find out if fone unlocked ... or how to do so. Once again, thanks. Looking forward to using the info.
Click to expand...
Click to collapse
Download WST tool and run the 'CID Action' button,it'll verify the CID lock/unlock status of the phone.
Cheers!

where do i find the wst tool and how do i put it on the phone.

wat is the wst tool and how do u put it on the phoine

abidin786 said:
where do i find the wst tool and how do i put it on the phone.
Click to expand...
Click to collapse
You can find the tool here
http://forum.xda-developers.com/showthread.php?t=329170
You install it on your pc - and it will read and diagnose your phone through the usb connection.
Read through the attached post - lots of info, download the file - and good luck

actually i bought the phone from ebay and it didn't come with sync cable its 8125 from at&t is there another way to unlock it somehow maybe. Please help me

You can't upgrade without the usb cord and a computer (you can, but it is far more difficult.
First you need the USB cord
Then You need "Wizard Service tool" Type that in to the search engine on this forum.
Then read the stickies (the ones at the top of every forum) related to the wizard
hint: Faria; Dr. Puttingham.
Then search wor the "Wizard service manual" which will explain how your the wizard works and has IMPORTANT information for you in case you screw up and have to put your Wizard into bootloader mode manualy. You can still recover even if it looks really bad.
Then you need the lockwiz tool that works. I'm not sure that the wizard serice tool will unlock the phone, I did it the hard way before discovering it.
Then you need a version of WM5 that has a hacked IPL and SPL 1.5.xxx (you willl find that in the upgrading and modifying thread on the wizard forum
Once you downgrade; you can use the WST(maybe) or Lockwiz (most likely) to unlock your device (you may have to run it twice or more if you are not paying enough attention)
After the phone is unlocked you should upgrade back to the 2.26 version (Tmobile rom)
Then you should know how to flash roms by then.
Getting the thing unlocked is the difficult part. The cooks make flashing easy. You will probably not be able to yse your device for about a day while you make sure that you follow all the steps making sure that you get it right.
also read all of the directions well. I know it is a lot of information and can be hard to swallow. idoubt that you will "Brick" your wizard. It might seem that way at times; especialy while you are flashing the rom as it take a long pause sometimes right in the middle of it and it's scarry. You should be able to recover just fine. (I have a TMo MDA and it was built far better than I think HTC intended to build it)
Lastly. Take the plunge when you are confident that you have all of the tools, Information, and contingency plans (such as the 2.26 version of tmobile rom)
Word of advice while you are looking for an upgrade: All ROMs have "issues" so if you read all of the posts on a rom that looks good to you, you will see that a lot of people are complaining, asking for improvements and so on. This is what you should use to chose what you want to put into your phone. If you start a thread "which is the best Rom? expecting that the information will come to you; you won't get far. I know that my "join date" says one thing, but I have been looking at this forum since august off and on to see if I should even make an attempt or open my mouth before I figured out how things work here. Heard a preecher say once "God helps those who help them selves" and while I'm not partcularly religious, I have to agree with that kind of policy.
good luck, and don't panic if something unexpected happens; in about a half hour you will figure out how to fix it... unless you panic and loose your head.
Some dude was threatening to "throw (his) phone into a wall." That's not very productive.

To unlock through lokiwiz02b tool,it must have direct physical connection between phone and pc via Activesync. Although,its possible to Activesync with BT(BlueTooth),but not sure if unlocking is possible,according to my understanding,it shud be possible,as all the data can be transfered and all the info can be exchanged via BT,there shudn't be a problem,but as I have never tried it myself,I can't be sure,its certainly not possible to flash a Rom with BT.Rom is flashed in Bootloaders mode only,and in bootloaders,Bt doesn't work,so flashing of rom is only possible via usb cable connectivity.
Cheers!

Everyone keeps saying "the USB cord" when the actuality is, "A(ny)" USB cord will suffice. Any USB to 5-Pin (Mini B) is fine. You should be able to score one from a local electronics source for less than $10 US. Considering their value to you (being able to use ActiveSync, being able to flash the phone), I'd say it is a sound investment in your future fun with the phone.
Here's a (linked) example:

XDA Terra in China

Sorry to bother you all again with a bricked Terra, but I need help from all my chinese friends here!
I live in China, but have a phone from Germany, the Terra, and no one in my city can repair it, because it's bricked.
I tried to search the net for a repair center in China, but there seems to be none.
Please, prove me wrong and post all the adresses you have got, where they can unbrick my Terra
Thank you a lot,
greetings from Changsha 长沙

Numerous forums in China about Smart Phone or WM6 Phone, etc. You can find some useful information on it.

The problem is my chinese (and my lack of knowledge). It is not good enough to crawl trough chinese forums. But actually I didn't that there were any, so your answer is constructive.
I will try to ask a chinese friend...
but thank's for your answer

http://bbs.pdafans.com/viewthread.php?tid=432638&highlight=c858
Suggest your Chinese friend to check this post.
Note: I am living in Chengdu.

If you bricked your terra as most people brick their terras, that is, during an attempted rom flash that didn't quite work, you will need to bypass the CID lock on your phone using USPL and install another ROM. Normally, one could just install their RUU, but such is not possible, as the Terra has no RUU.
I refer you to Papamopps, who has a (formerly) bricked terra

The main problem is: Bypassing CID lock (a.k.a. the ability to flash *ANY* firmware on your device)

First, thank you stmartin!
Hello Fzzyrn; yep, I think Tramuyo is right. The problem comes with CID Lock/Unlock.
I also contacted Canonyang and read alot, so here is my roundup (maybe it helps some of you to get new ideas, who knows).
The CID is a kind of chip or a piece of software implemented in a chip. It functions as a lock and will open only as the right key is inserted. Infact this key is the original RUU. Once your device is switched on (means your WM has booted), you can play around with the lock itself (because it's open now) and manipulate it (via USPL) or completely change it (via HardSPL). That is what makes it hard (hopefully not impossible) to flash via SD-card.
The other way, as Canonyang told me, is to change the physical chip that hold the CID itself. After that you have to boot up and play with the lock again, to really unlock your device. That is the way they unbrick Terras or Heralds here in China.
So, at least I got a new idea, but as long as I can not program I need to find the right place to post it

It's good that you did the research yourself.
just use the USPL to flash any rom that you want. That SHOULD bring it back to life, assuming you have access to the bootloader.

Fzzyrn, I just tried that several times before (again and again) and in fact I tried it just now again.
I can only set my phone in bootloader mode but then nothing happens (as a matter of fact the battery loads ). Means I can only "run" the bootloader but not modify it. Maybe it is because I can not get an activesync connection?
But thank you for giving me new hope
Right now I'm waiting for an answer by another forum member and I'm also closely watching Tramuyos work. If there are no news, I have to send-in my xda.

Newbish Questions

Please forgive these basic questions. I myself am a wing owner, but a coworker is in constant awe of the power of xda and has enlisted my help in maximizing his Hermes. Just a couple of questions:
Meaning to come off as a complete newb or a jacka** is not what I desire, but at the same time I haven't hours to invest towards knowing every detail about a phone I myself do not own. I'm fully well aware of how to search and obviously if I can type I can read, so informing to do either of these tasks will be meaningless to me.
My questions:
1) With the wing, if you "brick" your phone during a ROM flash, you can re-flash an RUU and you'll be just fine. Does this work the same way with the Hermes?
2) How difficult is the HardSPL process with the Hermes and is there anything to watch out for?
3) Are there special steps needed to take in order to upgrade him from wm5 to wm6/6.1 or a ROM based upon either version?
4) Is there a way to overclock the phone, and does it make a noticable difference? I already put batterystatus on it and it isn't giving me the overclocking options it does with my wing. I'm guessing it's because it's a different type of processor or because it's reading the base speed of the CPU @ 400mhz, which is higher than any of the overclocked speeds it offers me on my wing.
5) Is there anything else important to know about his phone? The last thing I want for the guy is to take his phone with promises if grandeur, and hand him back a paperweight without answers.

1) Depends on what brick
if you have hardspl'd and it just failed flashing the OS then you should be able to recover.. providing that you can get into bootloader mode.
if you are flashing the radio and it fails then you own a paperweight..
2) Hardspl on the hermes is simple - just read the thread and its easy

So for the Hermes, you flash the OS seperate from the Radio? Or are you talking about if you're reflashing only the radio?
And if you're not HardSPL and you brick during the OS flash you can't just go into bootloader and flash the RUU to recover the phone?

Well, as an 8525 owner, I'd have to say that flashing ROMs to a Hermes is rather painless and straight forward. I started with the official ROM for WM6 since it covered so many bases. However, I eventually used HardSPL(quite a painless experience) and loaded a ROM to it that didn't take up that much storage.
One word of warning. Make sure that the data connector's in good condition before attempting to flash. If it's not, use the microSD method. This procaution will save you many headaches.
I don't recommend overclocking. 1, it's dangerous. 2, there's few methods out there and many of them are said not to work. 3, by using a ROM with a large page pool you can increase the phone's speed.
Special? Well, that depends on the model.

I'm familiar with the pros and cons of overclocking as I myself have my wing overclocked from 201mhz to 273 and run it that way 24/7/365. Just curious as to how one does it on the hermes since BatteryStatus was a no-go.
Is there a particular wm6.1 rom that anyone would like to recommend? I know itje and ttran do exceptional work for the wings/heralds, but who're the cooks to look out for in the Hermes world?
And what exactly is the SD flash method for Hermes? On mine now that I'm hardspl'ed I can put any .nbh on my sd, rename it to HERAIMG.nbh, put it into bootloader and it'll flash for me.

I've not really delved into 6.1 due to early compatibility issues. I did try one, but I liked Schap's ROM better.
http://forum.xda-developers.com/showthread.php?t=392777
Basicly the same, but you have to name it HERMIMG.nbh. If you don't know how to get to bootloader mode, just push the side OK button, the power button, and the reset all at once. I used SSPL to put HardSPL onto my phone using the microSD method, so even if the data port's busted, all should be fine.

Basically any cooked rom doesn't have a radio rom cooked in. This allows YOU to decide what radio is best for you. My advice is if it works fine, leave it alone... When kingsizeriz says its a total brick he means that it won't work as a phone ever again... However, as a PDA, no worries, just flash a cooked rom with no radio...
Hard SPL is a MUST.... Also see if you can find out if you friends phone is "locked" to a network, you'll have to unlock first using this : http://forum.xda-developers.com/showthread.php?t=293665
Then Hard SPL, Here : http://forum.xda-developers.com/showthread.php?t=296722
To use the sd card method for Hard SPL, check out page 116.
Then flash with rom of choice... WM 6.1 is MUCH more stable now, & REALLY quick... Would suggest the PDAViet roms as I seem to find them pretty stable though the later versions of other roms seem ok too (19202 & up).
To flash with sd card - MAKE SURE YOU HAVE HARD SPL INSTALLED....
copy .nbh file to root directory of card and rename to "hermimg.nbh". Put in hermes and go into bootloader. Follow the prompts...
Hope this helps...Cheers....

Can you tell me either how many posts per page you use or what post number to start looking for? I use the max number of posts per page so the number might be different.
And I know he bought the phone from and uses it on AT&T, so I'd imagine it's locked to that.
Also, nobody's mentioned if there's any special steps needed to take to upgrade his phone from wm5 to 6(.1). Are there any?

Post #1160, Has all links for apps needed too...
If you want to sim/cid unlock you can run the unlocker v3to use Any sim card .
If you want to do this then do it 1st. It will upgrade your SPL to 1.10.
THEN Hard SPL... THIS IS A MUST. It wont stop you from bricking your device BUT it will improve your chances of recovering from most accidents....
Get you friend to find any HERMES rom they like (I like PDAViet 19588 at the moment as is VERY speedy) & download. I would recommend using the sd card method as it is safer from silly buggers "accidently" resetting pc or pulling out usb cable and power brown/black outs. All you need is for them to leave the hermes alone for 10 minutes or so while it flashes. Make sure you have better than 50% battery power though as flashing is battery draining... Even via usb it stops charging to flash...
Previous post as links for programs needed. Cheers....

[REQ]Rogers HTC Bricked - Please Help (Advanced User)

Hello Everybody,
Let me start off by saying that this is the worst phone I've ever used. I had great expectations from this phone but never mind - I'm going to stick to my Excalibur.
This is the first time in my life that i actually bricked a phone. I installed a couple of cooked ROMs and everything went fine. I have experience with CID Unlocking and flashing ROMs. Anyways, all I did was try to flash back to the original Rogers ROM from the Original Shipped ROMS thread and that's when my phone got bricked.
I have searched and done everything possible so far and NOTHING WORKS!
So far I've done this:
1) I have tried flashing the Chinese ROM/Dopod WWE Asia ROM as their official HTC ROM's.
2) Done a hard reset
3) Loads into Boot Loader and the boot loader version is
IPL - 2.21.0002
SPL - 2.21.0000
4) Ran MTTY and i got gsecuritylevel=FF (which means install shipped ROM)
5) Tried running USPL but no luck
6) Tried installing Rogers ROM from the original shipped ROMS thread, still no luck as it gets to 3% and reboots
I seriously don't know what else to do. This is just ANNOYING!! Ive been sitting here for the past 4-5 hours trying to get this damn thing to work.
Is there a way to downgrade the SPL so I could flash a ROM?
Is there a free permanent CID Unock available?
Is there ANY WAY out there to unbrick a Rogers HTC TOUCH
(DAMN ROGERS !!!)
Finally, I'm trying the SD Card ROM Update method and hoping it works.
Mods, if you see this and know of a way to help me out, please do or anyone else who knows what to do so my life is back to normal, please help. Thanks in advance.
EDIT: Ok, I tried the SD Card method, it says Checking SD Card Contents and nothing happened, all i see is a tri color screen. The SD Card is 2 GB, is the only file present on the card and it was renamed accordingly (the .nbh file).
Please help as I'm going nuts trying to fix this.
Best Regards,
lukybandit

Anyone at all?
I've done all the searching I could and everything I've tried so far has failed on me.
I can get into the bootloader, get into the hard reset and even can run a mtty session and no matter what I do, it gets stuck at the HTC logo.
In addition to this, all ROM's that I have tried so far keep getting the Error 270 (Obviously due to not being able to even temporarily CID unlocking it).
I did notice a lot of people have bricked their devices and I figure if i can get into the boot loader screen then at least SOMETHING can be done.

Here is what i have learned.
I have the Rogers Touch, and i said SCREW IT, and going to pick up an AT&T Tilt.. I already have 2 S621's, 1 Tytn 2, and i need another phone for my dad.
I had the touch for 1 week and had the same problem as you. Here is what i gather.
1. YOU CANNOT - install the original ROM if you flashed the incorrect ROM
2. Because there is no HARD SPL, i used the USPL, which on reset will result in a CID relock.
3. In this condition, the only way to reflash if you can't get back into the regular today screen is a custom SPL, by Olipro or something.
But Olipro (i keep forgetting his name), charges 75 GBP which equates to $160CDN or so. I bought my HTC Touch used for $200CDN. Makes no sense to fix it. So i am going to try and sell this phone to someone who wants to fix it for cheap.
Sorry man, i looked EVERYWHERE for a fix, and there was NONE to be found, unless you use this guy , who has succesfully fixed everyone elses phone.
Honestly, if my phone was worth alot more than $200, i would pay him with no issue, but because the fix is the same as buying the same phone again, it makes no sense.

Are you serious?!!!
So there's no way for me to fix this piece of ****? frig man.
I paid for this and now I can't fix it?
Can Rogers find out that I tried playing around with the phone or not? I hope not because It's been only 3 days since I got this and it's been barely used.
If there's a fix, please let me know.
That's not even worth it. If there's someone out there that can fix it, please help - Thanks
P.S: Thanks for your response.

Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html

http://forum.xda-developers.com/showthread.php?t=347700
treid that?

Noonski said:
Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html
Click to expand...
Click to collapse
Yes, I think I did do a hard reset but I will try again in 5 mins. It was a bad flash cause it stopped in the middle I think.
Yup Both SD Card & SIM Card Removed.
Im guessing the only way I could fix this would be - get the original shipped ROM but so far I was only able to find a dump and not an actual update installer.
My SPL & USPL is 2.21 - So what do you recommend. upgrading the SPL and then trying to re-flash..
Would the TMobile ROM work because my phones Rogers branded and no Canada does not have the Vogue.
In answer to your question, it doesn`t go more than 2-3 % and then gives me an Update Error (270)
ahhh...this is driving me insane.
Thanks so much for the help so far. Really hope you guys can help me out here.

The main thing is if it flashes SPL only in general or if it does the same thing.
You might even try just flashing the SPL 1.11.11 from Pof from bootloader.
Or just flash the original SPL.
If it doesn't I don't know a way of unlocking in Bootloader.
But more heads will pop up with some Flashing Nightmares experiences soon.

Noonski said:
Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html
Click to expand...
Click to collapse
I just performed a hard reset and tried reflashing but still no luck. It gets to 3% then reboots.
In regards to what you attached, how do I go about doing it? Let me know. I downloaded the 2.26 SPL and the NL ROM.

Noonski said:
The main thing is if it flashes SPL only in general or if it does the same thing.
You might even try just flashing the SPL 1.11.11 from Pof from bootloader.
Or just flash the original SPL.
If it doesn't I don't know a way of unlocking in Bootloader.
But more heads will pop up with some Flashing Nightmares experiences soon.
Click to expand...
Click to collapse
Original SPL being Rogers (Can't find it anywhere except a dump)?
k I'll try flashing the SPL 1.11
- Any other thoughts, bro? Thanks!

Did u tried SD card flashing??

Yeah, I did.
I tried the .nbh from the Rogers Dump and it says Invalid Certificate. I tried this other .nbh which said Dead_Elfin, still no luck and the Dopod Asia
I'm so mad/upset and I've tried so many methods to fix it. Is there no way I can get the Rogers dump to work in any way?

Hey man!
Somewhere in this thread (2nd page) a guy refers to a ROM that revives your half-dead Touch, "if you trust him"!
But you don't have anything to lose at this point,
so check it out! The link to the ROM is still alive.
Good Luck!
Regards!

kokotas said:
Hey man!
Somewhere in this thread (2nd page) a guy refers to a ROM that revives your half-dead Touch, "if you trust him"!
But you don't have anything to lose at this point,
so check it out! The link to the ROM is still alive.
Good Luck!
Regards!
Click to expand...
Click to collapse
I tried that but it didn't work but I'm trying once more now. Hopefully it'll work.

lukybandit said:
I tried that but it didn't work but I'm trying once more now. Hopefully it'll work.
Click to expand...
Click to collapse
EDIT: Didn't work, updates to 3% then reboots. Just Great !!! This is so annoying.

Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.

Noonski said:
Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.
Click to expand...
Click to collapse
yeah, i meant the dumped Roger's ROM.
This is the most annoying thing I've ever had to deal with in terms of owning all my phones. I am selling this phone or returning it back the moment I fix it.
And I'd threaten but he hasn't done anything lol
I hope he does help me out.

Noonski said:
Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.
Click to expand...
Click to collapse
i think its time we make it clear to everybody that XDA means SHARING to help everyone out and not to ask for money in return for something. XDA should only be for those ppl who can work hard for everyone without asking for money.

This phone was the biggest mistake I ever made in my life. I'm sick and tired of this already and I still haven't been able to get it fixed.

LukyBandit
I tried everything that these guys told you to do, NOTHING WORKS.
We have an operator branded device and do not have an ORIGINAL ROM to load in other than a DUMP.
Thats why we are stuck.
I am looking for someone local GTA that might charge less, but yes your TOUCH is fukked unless you are willing to pay OLIPRO $160CDN to fix a phone thats worth $200ish.
I am buying a TILT today, its not worth the stupid touch to fix.
What a waste of money that was. I am so happy my TYTN2 and my soon to purchase TILT has a HARD SPL to it.