Database Users

Dutch to english ROM

Hey guys,
Im another newbie, but who is actually scared of screwing up the phone. I have the Tmobile MDA compact III obviously, and the information page looks like this:
ROM version 1.13.114.1 NLD
ExtRom version 1.13.114.101
Model nr ARTE 110
CPU OMAP850
Im not so sure what this information tells you people who are knowledgable about this, however can I safely use the customised powermap file from this website's ftp (ftp://ftp.xda-developers.com/Artemis/Customized_ROMs/) to change the phone to english?
What are the procedures EXACTLY please, and what problems should I expect.
Another thing, what is CID lock, and how can I see if mine is or not?
I checked most of the threads, so I am knowledgable about this issue a bit, however because none of the topics were specifically about the Dutch version I wanted to make sure. Thank you a lot for your help...

1. you have to CID unlock your phone. only real solution is imei-check website, and that will cost you $40. this will prevent MANY of the problems with installing ROMs
2. don't do updating on Vista PC, use XP or older
3. follow on screen instructions of your chosen ROM update utility. don't panic if it takes too long and looks like the update process has "freezed". make yourself a coffee and let it finish installing.
4. enjoy!
PS... i strongly suggest you read as much as you can on this forum before doing any upgrading.... then you'll know what to expect.... and of course, don't forget that only YOU are responsible for anything that happens to your device, good or bad... good luck!

hey dim4x4,
thanks for the post, I appreciate it. However is the exe file I mentioned (customised power map) the right one? i know there are a few options to chose from, like the 3 options of the pdamobiz.com website. While im not too clear of the main differences, the general concensus on the forum is that the powermap is preferred, and has a lot of nice things. Is there a better one? perhaps on a different ftp. Maybe if you have one you can send it to me.
Another thing, if it dont work, or works and I dont like it, can I get back to my original ROM, the dutch one from the tmobile dutch file on the ftp site as well?
Thanks

1. Personally, I use PDAmobiz Lite version. Powermap version has a map of Thailand which I don't need. "A lot of nice things" for my purpose is a lot of unnecessary stuff. If I need something I can install it myself into RAM or storage card. You have to choose the version which suits you best.
2. Everything is on this server. You have to register to log in http://www.wm-gurus.com/registration/signup.php
3. I went back and forth with different ROMs (versions, languages, etc.) without any problem until I found more or less what I want. Please note, my device is CID unlocked by imei-chek.
Good luck!

Urgent Help
I tried the powermap version of the ftp. This is exactly what I did:
I connected the phone and established contact through activesync, then I started the exe file. The DOS windows opened, and then it started initialiying, and the process started. It said that it will take 15-30 mintues, and the process has started. So far im sure everypone is familiar with those. However, I waited about 35-40 minutes, and still nothing different on either screens. The DOS window said however that if nothing starts I should reset the process. I tried but didnt work. At that time I tried to reset the phone and now it is stuck in the startup screen. All I see on it is the IPL/OS data, and it is not moving further.
Please help, what do I do now?

So this is what I did so far....
1. Flashed with PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.exe (with device on Today screen)
2. The process started and stuck on "uploading file [don't remember] and as the instruction said I reseted the phone after 30 minutes.
3. All there is on is T-Mobile splash screen, version infos and that's it.
5. Tried to flash again in bootloader mode but the device was not visible by PC
How do I go from here? Maybe I need to flash the original rom version of the phone. I have the dutch tmobile mda compaxt III, but with the dutch ROM version on the ftp of this site is scary, because there are too many files and have no clue which one to flash.
Any suggestions?

There is no Dutch T-Mobile ROM available yet.
You could try the English T-Mobile ROM (art_tmouk_11311001_024990_wwe_ship.exe), which is available on this site: http://www.wm-gurus.com/registration/signup.php
There's a chance this ROM will work on your Dutch T-Mobile phone, if the signature is correct (I assume your phone is still CID locked).
Read this link http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets on how to enter the bootloader of your phone.

mRmAGIC...
I Tried That Already; But I Got An Invalid Id: So I Dont Know What Else So Far: Do You Think I Have To Cid Lock The Phone To Be Able To Try The Other Versions?

tghobar said:
I Tried That Already; But I Got An Invalid Id: So I Dont Know What Else So Far: Do You Think I Have To Cid Lock The Phone To Be Able To Try The Other Versions?
Click to expand...
Click to collapse
CID unlocking isn't possible if your phone isn't working.
If you don't have your original rom, you have to contact your provider to repair it.

try from bootloader screen
Hi I also did as u did but with a hards reset in the beginning.And it worked fine.read somewhere that if u dnt do a hard reset you could get into problems.If u can try to go to bootloader screen and try to flash from ther.

flashing from the bootloader screen gives me an error, the file cannot recognize that a phone is connected to the PC. that is the biggest problem I think.
DO you know how to flash the Tmobile NL version on the ftp. there is one that I dont know how to use

Newbie To Mda

I just got a TMobile MDA, and am brand new to this. I tried upgrading thru TMo site, but couldn't get Windows Mobile 6.0. Still have ROM 2.26.10.2; Radio 02.25.11; ExtROM 2.26.10.105. Anyway, I tried SNN Ver 2.o off of this site and it wouldn't upgrade. Any help from anyone before I start looking through site. Just looking for direction and a helping hand before I fry my MDA. Thanks to one and all. Looking forward to making great use of the site.!!!

Look here first
http://forum.xda-developers.com/showthread.php?t=298613
You will need to make sure that your phone is unlocked before you can proceed with any upgrades to wm6
Check out the Wizard Wiki also - lots of great info
Remember - you are on your own, you are responsible for any issues with your phone. But, if you read the sticky posts here, and on the wm6 wizard board - the directions, while extremely detailed - are right on.
Read, understand, and when you are ready to proceed - do not skip a step, and if the directions tell you to flash something, or upgrade something twice - it is for a reason - do it twice.
Good luck

mucho thanks
Much appreciated. Don't know if phone is unlocked, but like you said ... will read everything twice. Thanks alot. One more thing ... can you guide me to info on how to find out if fone unlocked ... or how to do so. Once again, thanks. Looking forward to using the info.

Loudaman said:
Much appreciated. Don't know if phone is unlocked, but like you said ... will read everything twice. Thanks alot. One more thing ... can you guide me to info on how to find out if fone unlocked ... or how to do so. Once again, thanks. Looking forward to using the info.
Click to expand...
Click to collapse
Download WST tool and run the 'CID Action' button,it'll verify the CID lock/unlock status of the phone.
Cheers!

where do i find the wst tool and how do i put it on the phone.

wat is the wst tool and how do u put it on the phoine

abidin786 said:
where do i find the wst tool and how do i put it on the phone.
Click to expand...
Click to collapse
You can find the tool here
http://forum.xda-developers.com/showthread.php?t=329170
You install it on your pc - and it will read and diagnose your phone through the usb connection.
Read through the attached post - lots of info, download the file - and good luck

actually i bought the phone from ebay and it didn't come with sync cable its 8125 from at&t is there another way to unlock it somehow maybe. Please help me

You can't upgrade without the usb cord and a computer (you can, but it is far more difficult.
First you need the USB cord
Then You need "Wizard Service tool" Type that in to the search engine on this forum.
Then read the stickies (the ones at the top of every forum) related to the wizard
hint: Faria; Dr. Puttingham.
Then search wor the "Wizard service manual" which will explain how your the wizard works and has IMPORTANT information for you in case you screw up and have to put your Wizard into bootloader mode manualy. You can still recover even if it looks really bad.
Then you need the lockwiz tool that works. I'm not sure that the wizard serice tool will unlock the phone, I did it the hard way before discovering it.
Then you need a version of WM5 that has a hacked IPL and SPL 1.5.xxx (you willl find that in the upgrading and modifying thread on the wizard forum
Once you downgrade; you can use the WST(maybe) or Lockwiz (most likely) to unlock your device (you may have to run it twice or more if you are not paying enough attention)
After the phone is unlocked you should upgrade back to the 2.26 version (Tmobile rom)
Then you should know how to flash roms by then.
Getting the thing unlocked is the difficult part. The cooks make flashing easy. You will probably not be able to yse your device for about a day while you make sure that you follow all the steps making sure that you get it right.
also read all of the directions well. I know it is a lot of information and can be hard to swallow. idoubt that you will "Brick" your wizard. It might seem that way at times; especialy while you are flashing the rom as it take a long pause sometimes right in the middle of it and it's scarry. You should be able to recover just fine. (I have a TMo MDA and it was built far better than I think HTC intended to build it)
Lastly. Take the plunge when you are confident that you have all of the tools, Information, and contingency plans (such as the 2.26 version of tmobile rom)
Word of advice while you are looking for an upgrade: All ROMs have "issues" so if you read all of the posts on a rom that looks good to you, you will see that a lot of people are complaining, asking for improvements and so on. This is what you should use to chose what you want to put into your phone. If you start a thread "which is the best Rom? expecting that the information will come to you; you won't get far. I know that my "join date" says one thing, but I have been looking at this forum since august off and on to see if I should even make an attempt or open my mouth before I figured out how things work here. Heard a preecher say once "God helps those who help them selves" and while I'm not partcularly religious, I have to agree with that kind of policy.
good luck, and don't panic if something unexpected happens; in about a half hour you will figure out how to fix it... unless you panic and loose your head.
Some dude was threatening to "throw (his) phone into a wall." That's not very productive.

To unlock through lokiwiz02b tool,it must have direct physical connection between phone and pc via Activesync. Although,its possible to Activesync with BT(BlueTooth),but not sure if unlocking is possible,according to my understanding,it shud be possible,as all the data can be transfered and all the info can be exchanged via BT,there shudn't be a problem,but as I have never tried it myself,I can't be sure,its certainly not possible to flash a Rom with BT.Rom is flashed in Bootloaders mode only,and in bootloaders,Bt doesn't work,so flashing of rom is only possible via usb cable connectivity.
Cheers!

Everyone keeps saying "the USB cord" when the actuality is, "A(ny)" USB cord will suffice. Any USB to 5-Pin (Mini B) is fine. You should be able to score one from a local electronics source for less than $10 US. Considering their value to you (being able to use ActiveSync, being able to flash the phone), I'd say it is a sound investment in your future fun with the phone.
Here's a (linked) example:

Unlocking a Cingular 8525 to use on T-Mobile

Hey guys, first post! I google'd "How to unlock 8525" and I am overwhelmed by everything that's on it. Can someone give me some clear answers on how to unlock the Cingular branded 8525, so I may use it on my T-Mobile network? Sorry if the answer is obvious, but I've read so much stuff that I'm a bit confused. Thanks in advance guys!

First make a note of your radio rom - settings>system>device info.
Then use this to unlock your Hermes (You'll need to read a bit too...) - http://forum.xda-developers.com/showthread.php?t=293665
THEN Hard SPL your phone (use ver7. After you finish your SPL will be 2.10 olipro) - http://forum.xda-developers.com/showthread.php?t=296722
I like to use the sd card method of flashing this as its safer and you don't get sync errors like the pc. Also no little "accidents" to brick your nice new, EXPENSIVE toy... Look on page 116, post 1160 for instructions and needed apps...
You can then put a new radio rom or whatever OS you like on it... I use the sd card method here too BUT just leave out steps 5 & 6 from the sd card method for installing Hard SPL (don't need sspl.exe).
Cheers...
And Welcome.....

Thanks for all that What OS and radio choices do I have though? What are the pro's and con's of each? Thanks in advance!

Radio roms are area and carrier specific. Thats why I said to make sure you know what your old one is. Unlocking your phone will downgrade your radio to 1.16.xx.xx This is neede to unlock your phone.
Flashing the radio is RISKY. If something gos wrong then 9 times out of 10 you have a brick, and the 10th time you have divine intervention to get it going again... Its best to find a good radio rom and don't flash again unless you know its gonna be better...
As for OS roms, go to the Hermes WM06 forum. There are plenty of roms there that are cooked by our brilliant chefs.. I believe there is a post at the top showing you some of the later ones. DON'T bother asking whats best though because a rom choice is a personal preference... What I like and what you like may be 2 VERY different things...
Make sure you have Hard SPL ver 7 installed and (especially for the radio rom where you DON'T want any interruptions) use the sd card method.
As Wam7's quote says - Flashing your ROM without HARDSPL is like going to a South African brothel without any condoms...
and not flashing with a MicroSD Card is like walking into a prison, dropping your pants and yelling "come and get it boys!" jdc
Cheers...

Thanks I saw a picture that showed the processors mhz, and it seemed to let you downclock it, where can I get that? Also, what are some useful programs and such to have?

Hi, here's some great info reference by veyka for U:
http://forum.xda-developers.com/showthread.php?t=419158

Well...
I'll be honest with you. I had this little dilemma not too long ago and discovered that unless you want to pay close to $50.00 to get it unlocked from one of those unlocker sites, you MUST request from AT&T to process your subsidy unlock code. Almost all wireless carriers that sell phones with their branded name on the device or on the splash screen are locked to that specific carrier, for marketing or whatever the company desires. You must obtain your IMEI number, (just enter *#06# on your keypad) call AT&T customer service, request a subsidy unlock code, (just tell them you plan on using the device overseas and are not interested in their overseas calling plan they will then try to sell you) and wait about 1-2 weeks for an email reply. Trust me when I say this, AT&T has NO IDEA what the code is or what the status is once they have submitted the request. It is transferred to their "Tier III" tech support division, which is why it takes so long to respond. Just wait it out, and your patience will pay off when you receive the email. I'm sure you know that once you get the unlock code, all you must do then is insert a SIM from any carrier other than AT&T, reboot, and your hermes will prompt you to enter subsidy unlock code. It is usually either an 8 or 9 digit code. Be careful when entering, as too many wrong attempts will "Brick" your device. It is then you will be able to use T-mobile's service. I also had my number ported to T-mobile's network...All you have to do for that is ask T-mobile(Don't tell AT&T) to port your number for you and ther's not a damn thing AT&T can do about it. Now. As far as ROM flashing is concerned, I had to learn by thumbing through the wiki, anf forums and making many posts like yourself. First, as described by ultramag, you MUST install HardSPLv7 on your phone. once that's done and you have verified via your bootloader screen (pwr+ok+reset sw) It should say something along the lines of HERM100 IPL-1.04/HERM100 SPL-2.10.Olipro-----> Then you can start looking at flashing ROMs. Don't worry about flashing Radio ROM, that's not necessary. Any questions, send me a msg.... Good luck flashing!!!

Thank you, both the Sim unlock and Hard SPL thingy went well. At least the process of downloading and executing the programs. Both processes stated successfull completions once I figured how to to run them properly. 1 attempt on unlock, and I didn't quite understand the instructions the first time through on Hard SPL, but the 2nd time one the on-screen popped on the device it was simple enough.
Once I test with my sim card later today I'll give the total thumbs up, but so far so good before I go "ROM shopping".
Oh and its a Cingular 8525 that I'll be using on T-Mobile (Herm100)

Just make sure when you Hard SPL your Hermes the SPL is changed to 2.10 oli.
You need to use Hard SPL V7. Its the latest and safest version.
If you unlocked your Hermes then you might be using an older, not so safe version of Hard SPL which may not help you to unbrick your Hermes if, god forbid, anything goes wrong with the flash.
Just a piece of advice..
Cheers...

How can I tell it's unlocked?
I have both an 8525 and a Tilt. I "unlocked" the 8525 using a program I downloaded from here, and the Tilt using the modified radio rom approach.
I took the 8525 to a T-Mobile store, and when we put the new sim chip in, it wouldn't work, it wanted an unlock code. I haven't tried the Tilt yet and before I do (The clerk at the store hinted that she thought I was a crook of some sort for having an unlocked phone with the Cingular logo on it) I would like to be SURE it's unlocked.
Is there some kind of test I can perform, or a registry key I can check or something to verify the unlock really worked? The program I ran to unlock the 8525 (Herm_Unlock_v3) gave no errors and stated that "Device SIM/Network lock removed!" - but obviously it wasn't.
So, how can I check before I go back to the store, that the devices are really unlocked?
Walt

[Q] ROM with German language?

Hello!
I got an HTC HD2 from T-Mobile USA. Now I have got the problem, that I need German language for the phone.
Do some rom files exists which contains German and maybe no provider branding??
And where I can download it??
I used the search button but can't find a clear answer. Only some problems with German keyboard layout.
THX!!
Regards
Chris

No one can help me???
Regards!

You're in luck. NRG Energy Roms are now made in German. Linked below. You'll need to flash your phone and install the proper radio. It's very easy if you read up before flashing. In my sig you'll find a link with info on how to flash your phone. Follow it to a "T" and you'll be fine. Hit us up if you need any more help.
Good Luck.
2nd post, click on the German flag.
http://forum.xda-developers.com/showthread.php?t=591784

Thank you very much!
But before I have to unbrick the phone via Jtag. I'll do this this evening with my new box and will report if the flash works.
The Flashfiles are in normal HD2 section. They are compatible with 1024MB Leo?
THX!
Regards
Chris

Chris021286 said:
Thank you very much!
But before I have to unbrick the phone via Jtag. I'll do this this evening with my new box and will report if the flash works.
The Flashfiles are in normal HD2 section. They are compatible with 1024MB Leo?
THX!
Regards
Chris
Click to expand...
Click to collapse
I for one have never heard of Jtag. You don't have to unbrick the phone because if you phone was bricked it wouldn't be working ever again. You have to flash hardspl on the phone to allow you to change its rom. And because you already said that you have a T-Mobile USA phone it should already have the proper radio. Take a look below for instructions on how to flash your phone.
How to install ROM
http://forum.xda-developers.com/showthread.php?t=653614

ddgarcia05 said:
I for one have never heard of Jtag. You don't have to unbrick the phone because if you phone was bricked it wouldn't be working ever again. You have to flash hardspl on the phone to allow you to change its rom. And because you already said that you have a T-Mobile USA phone it should already have the proper radio. Take a look below for instructions on how to flash your phone.
How to install ROM
http://forum.xda-developers.com/showthread.php?t=653614
Click to expand...
Click to collapse
actually jtag is the one possibility for fixing the 51 radio meets tmous brick, but they're fairly expensive, and not many people have access to them. It allows you to write directly to the rom chips so no bootloader necessary.
@Chris021286, you have a brick? and you are going to jtag it? What type of jtag do you have?
We'd all be very interested in your results, please, if you would keep us posted on how you get on.

samsamuel said:
actually jtag is the one possibility for fixing the 51 radio meets tmous brick, but they're fairly expensive, and not many people have access to them. It allows you to write directly to the rom chips so no bootloader necessary.
@Chris021286, you have a brick? and you are going to jtag it? What type of jtag do you have?
We'd all be very interested in your results, please, if you would keep us posted on how you get on.
Click to expand...
Click to collapse
Yes, the phone is bricked. It was flashed with a Europe LEO flash (512MB). Phone won't start in bootloadermode anymore.
I'll try to reflash the BL via JTAG tomorrow. I'm sure it won't be a problem.
GSM repairing and flashing is my hobby since 8 Years so I have some experience
If you want to know more about JTAG and how to you can send me your ICQ Nr. as PN.
Regards

hehe, interesting. I've never had chance to play with one, but read a bit of theory.
Let us know how you get on, a lot of people have bricked them with the wrong radio, it would be good to know it can be done.
Most people just take them back to tmo and play dumb.

Finally I take the time to unbrick the HD2. I sucessfully flashed the bootloader.
Now the phone starts in Bootloader Mode again
But I don't know how to fix the rest.
If I start the phone normal it hangs at HTC Logo (There stands only HTC and nothing more) and the phone isn't recordnized via USB.
If I start it in BL Mode phone is recordnized from Win.
But active sync won't find it...so I can't do step 2
So I continued with step 3^^
Flashing worked ok. I flashed the files from: Energy.Leo.23127.Sense2.5.GER.Aug.28
And have done also an hardreset. But still the same. HTC Logo and Bootloader mode.
I guess I need to install any HSPL or Radio rom, right? But how???
So please tell me how to finish my work
THX!
Regards
Chris
PS: When I fixed the phone I'll introduce you how to unbrik any HTC device via JTAG. And will show you the 3 jtag boxes which are on marked.
It is nothing special, everyone can find it via google, but it seems that it isn't know in this great forum yet
EDIT
Phone starts now
HSPL flashing was starting after I reconnected the phone when the flasher was searching for phone (search takes about 15sek^^).
After that I repeated flashing ROM and it was still the same. But after flashing 2.07.50 Radio, as NRGZ28 wrote, phone boots as it shoud!

[q] htc elf bricked showing tri colour

hi
I have got a bricked HTC ELF with a tri-colour screen.(red, green and blue). I did try matty.exe and found that cid is locked. g_cKeyCardSecurityLevel = FF
I dont have the original firmaware backed up. and could not find anywhere on this site and internet.
device id: ELF010050
cid: HTC E11
IPL 1.17.002
SPL: 1.17.0000
Is there any way to find the original rom or is there any way to unlock the cid and then just put any rom on it? I dont have the working pda or wm device to do goldcard method. I know there is way to do the goldcard method without the WM device but then I need a desktop or laptop with a PCI or internal cardreader installed whereas I have got a usb card reader.
can usb card reader do the goldcard method without the wm device?
any suggestion will be appreciated since it has been almost 3 years for me to get my device back to life.
regards
plz suggest.
regards

Hi mate,
All info you need is in the stickies and /or using search function. You need to unlock cid and flash custom rom. BTW tri-colour screen is called Bootloader.
Ps: there was no reason to open a new thread for that ...

hi
thanx for the reply
I have been reading the stickies but could not find
the specific soultion for my problem. can u send me a link or step by step instruction?
regards

Moved to general as this does not belong in development.
There's no need for a step by step guide, all the information is in the wiki or stickies.

hi
I have runout of options and tried almost all. still no success. I was asked to
read stickies which I did but still no use.
no one seems to be answering the question. haha
anyway I have not given up hope.
regards

Yea!! That's the spirit

I can answer to the card reader: as far as I know it has to be an on board reader, otherwise it masks/hides something with the cardid.

hi
hmmm. so that means cardreader option has gone too. haha.
anyway thanx for letting me know that.
so the only option left for me is too wait for someone to send the original
rom so that I can download it and put on my HTC P3450.
regard

I wouldnt hand around for too long waiting for someone to upload the stock firmware, it may never happened to be honest.
Do you know the original operator for the phone? It is possible, at a push, that it may be lurking on a website still, just hard to find. That could possibly yeild a result, hopefully.
If you post, I may have a look - but again, I can't promise anything!

captainstu72 said:
I wouldnt hand around for too long waiting for someone to upload the stock firmware, it may never happened to be honest.
Do you know the original operator for the phone? It is possible, at a push, that it may be lurking on a website still, just hard to find. That could possibly yeild a result, hopefully.
If you post, I may have a look - but again, I can't promise anything!
Click to expand...
Click to collapse
What's the damage if he tries all the roms, one after the other ? If there's none, gogagogi might get lucky

His phone is still CID locked. I guess it could potentially be a brick. I think, that or it won't let you flash the rom at all. I forget which - been a while!
gogagogi: Have you tried seeing if you can flash ipl/spl from SD card - never been in the position you're in so just curious.

Hi
yes it is cid locked. I did try to flash few stock roms which I thought similar to the rom I have got
on my device through usb data cable but no luck. after 2% or 3% is says invalid vendor ID. then I tried through micro sd card but same result.
then I tried unbricker rom through usb and micro sd card but same result.
even I tried to change the vendor id through a softerare called xvi32. that is
a hex reader. open the .nbh file and change the vendor id but the result was no good. it said " the file or image has been corrupted"
and I never tried to flash ipl and spl.
regards

can you give the IPL/USPL a go to see what happens? (its a link to it for you)
Also, whats was your opertor, not sure if i missed it.

hi
when I bought it, it was on T-mobile. but it was sim free. thanx for the link.
I will have a look.
regards

t-mobile uk sorry or something else?

hi
it was on T-mobile NL.(netherlands).
I did have a look at the link u sent it to me.
after reading it, I found out that Microsoft ActiveSYnc has to be green first.(connected).
whereas it can not be connected, if the device is stuck on bootloader so this option has gone too.
the only option so far is, either I find out the original rom or if I can find out some matty.exe commands which can help me unlock the CID so that I can put any rom.
matty.exe is working fine so far.
so what do u think?
regards

gogagogi:
I don't appreciate the message you have sent to my personal in box to be honest, You're lucky I am replying to you at all!
When in bootloader does it say RUU at the top right? And does it pick up USB connection? Have you tried to flash via SDCARD the IPL/SPL roms?
I have a job, a daughter, and a live out side of XDA. If I do not reply to a thread, it means I am thinking, have missed it by accident, or am simply just too busy. I do not get paid to be here, I am not a moderator, I am just a member like yourself, I do not expect to get private messages hassling me to reply to a thread.
The Elf isnt even my main device. I use a HTC Hero (Android), and have done for quite a long time now. I look in here simply to help out other people who are still using this device.
Thanks, Stu

well it does say ruu text at the right top corner and it does say usb at the bottom.
as I said it does connect through Matty.exe.
well I did not mean to disturb you. I was just wondering cuz u were replying me before and then just stopped.
so mate you just chill.
ignore any previous questions from me.
regards

OKay, as the ruu is there, you should still be able to flash a from that point - I have done this a fair few times.
Have you tried the IPL/SPL yet?