Database Users

Dutch to english ROM

Hey guys,
Im another newbie, but who is actually scared of screwing up the phone. I have the Tmobile MDA compact III obviously, and the information page looks like this:
ROM version 1.13.114.1 NLD
ExtRom version 1.13.114.101
Model nr ARTE 110
CPU OMAP850
Im not so sure what this information tells you people who are knowledgable about this, however can I safely use the customised powermap file from this website's ftp (ftp://ftp.xda-developers.com/Artemis/Customized_ROMs/) to change the phone to english?
What are the procedures EXACTLY please, and what problems should I expect.
Another thing, what is CID lock, and how can I see if mine is or not?
I checked most of the threads, so I am knowledgable about this issue a bit, however because none of the topics were specifically about the Dutch version I wanted to make sure. Thank you a lot for your help...

1. you have to CID unlock your phone. only real solution is imei-check website, and that will cost you $40. this will prevent MANY of the problems with installing ROMs
2. don't do updating on Vista PC, use XP or older
3. follow on screen instructions of your chosen ROM update utility. don't panic if it takes too long and looks like the update process has "freezed". make yourself a coffee and let it finish installing.
4. enjoy!
PS... i strongly suggest you read as much as you can on this forum before doing any upgrading.... then you'll know what to expect.... and of course, don't forget that only YOU are responsible for anything that happens to your device, good or bad... good luck!

hey dim4x4,
thanks for the post, I appreciate it. However is the exe file I mentioned (customised power map) the right one? i know there are a few options to chose from, like the 3 options of the pdamobiz.com website. While im not too clear of the main differences, the general concensus on the forum is that the powermap is preferred, and has a lot of nice things. Is there a better one? perhaps on a different ftp. Maybe if you have one you can send it to me.
Another thing, if it dont work, or works and I dont like it, can I get back to my original ROM, the dutch one from the tmobile dutch file on the ftp site as well?
Thanks

1. Personally, I use PDAmobiz Lite version. Powermap version has a map of Thailand which I don't need. "A lot of nice things" for my purpose is a lot of unnecessary stuff. If I need something I can install it myself into RAM or storage card. You have to choose the version which suits you best.
2. Everything is on this server. You have to register to log in http://www.wm-gurus.com/registration/signup.php
3. I went back and forth with different ROMs (versions, languages, etc.) without any problem until I found more or less what I want. Please note, my device is CID unlocked by imei-chek.
Good luck!

Urgent Help
I tried the powermap version of the ftp. This is exactly what I did:
I connected the phone and established contact through activesync, then I started the exe file. The DOS windows opened, and then it started initialiying, and the process started. It said that it will take 15-30 mintues, and the process has started. So far im sure everypone is familiar with those. However, I waited about 35-40 minutes, and still nothing different on either screens. The DOS window said however that if nothing starts I should reset the process. I tried but didnt work. At that time I tried to reset the phone and now it is stuck in the startup screen. All I see on it is the IPL/OS data, and it is not moving further.
Please help, what do I do now?

So this is what I did so far....
1. Flashed with PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.exe (with device on Today screen)
2. The process started and stuck on "uploading file [don't remember] and as the instruction said I reseted the phone after 30 minutes.
3. All there is on is T-Mobile splash screen, version infos and that's it.
5. Tried to flash again in bootloader mode but the device was not visible by PC
How do I go from here? Maybe I need to flash the original rom version of the phone. I have the dutch tmobile mda compaxt III, but with the dutch ROM version on the ftp of this site is scary, because there are too many files and have no clue which one to flash.
Any suggestions?

There is no Dutch T-Mobile ROM available yet.
You could try the English T-Mobile ROM (art_tmouk_11311001_024990_wwe_ship.exe), which is available on this site: http://www.wm-gurus.com/registration/signup.php
There's a chance this ROM will work on your Dutch T-Mobile phone, if the signature is correct (I assume your phone is still CID locked).
Read this link http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets on how to enter the bootloader of your phone.

mRmAGIC...
I Tried That Already; But I Got An Invalid Id: So I Dont Know What Else So Far: Do You Think I Have To Cid Lock The Phone To Be Able To Try The Other Versions?

tghobar said:
I Tried That Already; But I Got An Invalid Id: So I Dont Know What Else So Far: Do You Think I Have To Cid Lock The Phone To Be Able To Try The Other Versions?
Click to expand...
Click to collapse
CID unlocking isn't possible if your phone isn't working.
If you don't have your original rom, you have to contact your provider to repair it.

try from bootloader screen
Hi I also did as u did but with a hards reset in the beginning.And it worked fine.read somewhere that if u dnt do a hard reset you could get into problems.If u can try to go to bootloader screen and try to flash from ther.

flashing from the bootloader screen gives me an error, the file cannot recognize that a phone is connected to the PC. that is the biggest problem I think.
DO you know how to flash the Tmobile NL version on the ftp. there is one that I dont know how to use

opps

Alright well i was trying to update my MDA to WM6 and it errored at 96% and now all i got is the three color thing.
My question is, how do i go about fixing it and reinstalling an OS?

You need to specify what your IPL/SPL is so we can tell if this is a G3 or G4 phone and what state its currently in, but... Since you have the rainbow boot loader screen, with the USB attatched, you should be able to run your carrier's official rom to reinstall it.
A lot of the ROMs will pause for 5 mins or more around the 95% mark (it varies, I've seen some pause like this at 80%, some 90%, some 95% or 96%), so you just have to wait for it to finish (or you get an error on your PC).
If you are wanting to load a custom rom (or one not from your carrier) then you need to go into the Wizard Upgrading forum and read the stickies at the top. If you have a G3 device, the Faria and Dr P stickies are the ones you want. If you ahve a G4, then read the sticky for upgrading a CID Locked device...
Good luck (and be careful. make sure you read and read and read )

Alright, thanks for all the help, i just need to find my T-Mobile disk now. lol. which might be hard seeing as im kicked out of my home and don't have all my stuff just yet.

Folic said:
Alright, thanks for all the help, i just need to find my T-Mobile disk now. lol. which might be hard seeing as im kicked out of my home and don't have all my stuff just yet.
Click to expand...
Click to collapse
?if you mean the cd that came with the phone from t-mob and the official rom. it almost certainly won't be on the disc as the phones are sold with the rom already flashed, and they don't want you to be able to flash another rom so they would not provide it to flash back to. you'll have to search for it. if you are usa t-mob http://www.t-mobileapps.com/downloadcenter/Software_List.cfm?selDevice=24
otherwise, google.

Unlocking a Cingular 8525 to use on T-Mobile

Hey guys, first post! I google'd "How to unlock 8525" and I am overwhelmed by everything that's on it. Can someone give me some clear answers on how to unlock the Cingular branded 8525, so I may use it on my T-Mobile network? Sorry if the answer is obvious, but I've read so much stuff that I'm a bit confused. Thanks in advance guys!

First make a note of your radio rom - settings>system>device info.
Then use this to unlock your Hermes (You'll need to read a bit too...) - http://forum.xda-developers.com/showthread.php?t=293665
THEN Hard SPL your phone (use ver7. After you finish your SPL will be 2.10 olipro) - http://forum.xda-developers.com/showthread.php?t=296722
I like to use the sd card method of flashing this as its safer and you don't get sync errors like the pc. Also no little "accidents" to brick your nice new, EXPENSIVE toy... Look on page 116, post 1160 for instructions and needed apps...
You can then put a new radio rom or whatever OS you like on it... I use the sd card method here too BUT just leave out steps 5 & 6 from the sd card method for installing Hard SPL (don't need sspl.exe).
Cheers...
And Welcome.....

Thanks for all that What OS and radio choices do I have though? What are the pro's and con's of each? Thanks in advance!

Radio roms are area and carrier specific. Thats why I said to make sure you know what your old one is. Unlocking your phone will downgrade your radio to 1.16.xx.xx This is neede to unlock your phone.
Flashing the radio is RISKY. If something gos wrong then 9 times out of 10 you have a brick, and the 10th time you have divine intervention to get it going again... Its best to find a good radio rom and don't flash again unless you know its gonna be better...
As for OS roms, go to the Hermes WM06 forum. There are plenty of roms there that are cooked by our brilliant chefs.. I believe there is a post at the top showing you some of the later ones. DON'T bother asking whats best though because a rom choice is a personal preference... What I like and what you like may be 2 VERY different things...
Make sure you have Hard SPL ver 7 installed and (especially for the radio rom where you DON'T want any interruptions) use the sd card method.
As Wam7's quote says - Flashing your ROM without HARDSPL is like going to a South African brothel without any condoms...
and not flashing with a MicroSD Card is like walking into a prison, dropping your pants and yelling "come and get it boys!" jdc
Cheers...

Thanks I saw a picture that showed the processors mhz, and it seemed to let you downclock it, where can I get that? Also, what are some useful programs and such to have?

Hi, here's some great info reference by veyka for U:
http://forum.xda-developers.com/showthread.php?t=419158

Well...
I'll be honest with you. I had this little dilemma not too long ago and discovered that unless you want to pay close to $50.00 to get it unlocked from one of those unlocker sites, you MUST request from AT&T to process your subsidy unlock code. Almost all wireless carriers that sell phones with their branded name on the device or on the splash screen are locked to that specific carrier, for marketing or whatever the company desires. You must obtain your IMEI number, (just enter *#06# on your keypad) call AT&T customer service, request a subsidy unlock code, (just tell them you plan on using the device overseas and are not interested in their overseas calling plan they will then try to sell you) and wait about 1-2 weeks for an email reply. Trust me when I say this, AT&T has NO IDEA what the code is or what the status is once they have submitted the request. It is transferred to their "Tier III" tech support division, which is why it takes so long to respond. Just wait it out, and your patience will pay off when you receive the email. I'm sure you know that once you get the unlock code, all you must do then is insert a SIM from any carrier other than AT&T, reboot, and your hermes will prompt you to enter subsidy unlock code. It is usually either an 8 or 9 digit code. Be careful when entering, as too many wrong attempts will "Brick" your device. It is then you will be able to use T-mobile's service. I also had my number ported to T-mobile's network...All you have to do for that is ask T-mobile(Don't tell AT&T) to port your number for you and ther's not a damn thing AT&T can do about it. Now. As far as ROM flashing is concerned, I had to learn by thumbing through the wiki, anf forums and making many posts like yourself. First, as described by ultramag, you MUST install HardSPLv7 on your phone. once that's done and you have verified via your bootloader screen (pwr+ok+reset sw) It should say something along the lines of HERM100 IPL-1.04/HERM100 SPL-2.10.Olipro-----> Then you can start looking at flashing ROMs. Don't worry about flashing Radio ROM, that's not necessary. Any questions, send me a msg.... Good luck flashing!!!

Thank you, both the Sim unlock and Hard SPL thingy went well. At least the process of downloading and executing the programs. Both processes stated successfull completions once I figured how to to run them properly. 1 attempt on unlock, and I didn't quite understand the instructions the first time through on Hard SPL, but the 2nd time one the on-screen popped on the device it was simple enough.
Once I test with my sim card later today I'll give the total thumbs up, but so far so good before I go "ROM shopping".
Oh and its a Cingular 8525 that I'll be using on T-Mobile (Herm100)

Just make sure when you Hard SPL your Hermes the SPL is changed to 2.10 oli.
You need to use Hard SPL V7. Its the latest and safest version.
If you unlocked your Hermes then you might be using an older, not so safe version of Hard SPL which may not help you to unbrick your Hermes if, god forbid, anything goes wrong with the flash.
Just a piece of advice..
Cheers...

How can I tell it's unlocked?
I have both an 8525 and a Tilt. I "unlocked" the 8525 using a program I downloaded from here, and the Tilt using the modified radio rom approach.
I took the 8525 to a T-Mobile store, and when we put the new sim chip in, it wouldn't work, it wanted an unlock code. I haven't tried the Tilt yet and before I do (The clerk at the store hinted that she thought I was a crook of some sort for having an unlocked phone with the Cingular logo on it) I would like to be SURE it's unlocked.
Is there some kind of test I can perform, or a registry key I can check or something to verify the unlock really worked? The program I ran to unlock the 8525 (Herm_Unlock_v3) gave no errors and stated that "Device SIM/Network lock removed!" - but obviously it wasn't.
So, how can I check before I go back to the store, that the devices are really unlocked?
Walt

herm300 dead

Hello i try to unlock herm300 mda t mobile and spmthing goes wrong, and i need help, when i try to pover on. on scren shov mee m05 ,s04 b06 ,d1,21 no gsm, and show me logo t mobile this is end, is hangup,when i put in boot mode i have on the screan 4 color, and on display herm300 i pl-1,01 and herm300 spl-1,04., i try update but no sucess. Thank you.

I should have a sticky with this post , download and install the original carriers rom, if it was originally on o2 uk then use that rom. Ignore all the prompts saying tick if you have an active sync connection and tick them anyway and flash the rom, then hopefully your device will come back to life

the wiki is a vast source of info , if you tried looking on there all of these questions are pretty much answered
Try flashing the t mobile rom from here
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions

Apologies for asking, but i've been round and round the site and I keep confusing myself as to what to use. I keep thinking I have fulfilled all the right tick boxes then I realise the ROM is for WM6 ... and I've only got WM5 at the moment. Or that its for a different version of the Hermes ... and I wasn't sure it would work on my handset.
I am wanting to flash my rom, should I use the T mobile one or some other one. I have an O2 sim in a T mobile Vario II.
I was also wanting to upgrade to WM6 but not sure if I should try and upgrade that first then flash the rom.
I've unlocked using a v3 unlock from here and I have used the Hard SPL-v7
Can somone advise me as to either which Rom to use or link me to where I can upgrade to WM6, and which way round I should do it.
Thanks.

Since you have unlocked and Hard SPLed your Hermes it doesn't matter what rom you use.
For personal preference though, I use the sd card method to flash the ROM as you get fewer problems that may "brick" your device. seeing as how you have Hard SPLed your Hermes try this.....
1. Format a 2Gb or less sd card FAT32. Copy the .nbh file of the ROM you want on it. Rename to hermimg.nbh .
2. Insert card into Hermes and go to bootloader - hold power button, OK button above the flywheel and reset with stylus. Hold all buttons in until you get to tri-colour screen A.K.A. bootloader.
3. As long as you have followed the instructions and have no spelling mistakes, follow the prompts.
JUST MAKE SURE YOU HAVE GOOD BATTERY CHARGE. You can't charge the battery while flashing.
I find that the only way to stuff up the flash like this is to reset with the stylus halfway through the flash (or have the battery die) so its safer.
As for ROMs, the ROMs you mentioned are stock ROMs. They are full of bloatware and tend to slow down your Hermes. Look in the WM06 part of this forum to see the newer WM6.5 cooked ROMs. Do some reading to see what you want (I believe theres a sticky at the top with about 50 WM06 roms) and make sure to read the last few pages as there are generally any problems and/or resolutions there.
Happy Flashing...
Cheers...

Many Many Thanks.
If I read this right. If I flash using a WM6 rom, will that give me WM6? I know that sounds stupid that I don't know, but I have found some comments really ambiguous due to some techno geek speak... I'm trying really really hard to find stuff and understand. I previously thought it would just change stuff behind the scenes.
Thanks again. I'll try it tonight if I get the chance.

Pontoon said:
Many Many Thanks.
If I read this right. If I flash using a WM6 rom, will that give me WM6?
Click to expand...
Click to collapse
yes this will give you WM6 .. and there are many great versions out there.. just find one you like by trying many of them or just look at some threads and flash.. but remember the rom must be found in hermes section .. do not flash it with a rom made for other devices hehe.. well good luck upgrading we're sure your gonna do great..

Won't get a chance to do it till the weekend now, Beer got in the way last night. However I'll have a go on Sat, which gives me time to go research the ROM's
Thank you! You're a star.

Okay next question.
Should I flash the Radio ROM before or after Flashing my ROM?
Also someone recommended that you should flash a stock ROM first, then a radio ROM then my chosen ROM (I think I'm favouring the Faria32 at the moment and its that thread i found the info on.)
Is there any point to this or should I go for the ROM I want and worry about the radio ROM later. ...

leave the radio alone unless you have truly **** reception on the vario, safer to just flash the rom OS(operating system or windows if you prefer)
Saying that though i have flashed my devices at least a 100 times each and had no problems, main thing to worry about is power, so make sure the battery is charged fully and the electric meter is topped up
You should only flash a stock rom if you are using a big storage rom or you have had hangups and slowness of your device before hand. There is a ATT stripped rom with no radio in it that i use from here, think that might even be in the faria thread.
Anyway try flashing the faria rom then if it is acting sluggish or hanging just flash a stock rom then flash it again with the faria rom
Good luck and happy flashing +
XDA-Developers the only place you can flash as much as you like and the cops dont arrest you

I stayed up wayyy past bedtime last night and flashed my rom.
Colour me happy.
I've an all singing all dancing working phone... though i lost settings when i reloaded my backup... but then finally managed to get them from O2 again... though they had "idiots r us" on duty this morning.
Though MMS still seems to be having problems.... I'll trawl a while and see if I can find a solution to that... though I think its a case of O2 just not allowing it cos its a Tmobile handset. grrrrr.

Download a version of Arcsoft mms composer and install to the hermes, NOT sd card. Run the service wizard, if your rom has it, and that should fix the problem.

Okay. I followed instructions and downloaded Arcsoft. I then tried to run the O2 settings on it from O2UK_Mobile_Settings cab. It doesn't seem to have fixed the mms settings.
I've tried manually typing in various o2 settings which I've located. I'm not sure if I've missed something important or not.
I don't think i have the service wizard on my phone, but having only just been researching flashing ROMs for the last couple of weeks I'm still on a steep learning curve. So if its liable to be part of the Faria 32 Rom and i've just not found it can you point me in baby speak to it.
Appologies for being thick.
I have been trying to find the information on the site, however the search engine doesn't seem to like mms as a seach term... and when i do get stuff up it seems an awful lot of folk asking for help... or its advice for other operators.
NB I have phoned O2 about this twice... and I find it increasingly frustrating being told that they'll send me the settings straight to my phone, which failed doing it on the net so why would it work for them? then they emailed instructions... which involved directions to the automatic setup... which I'd already tried. Then they sent the Mobile Web settings and how to set up my email... none of which I asked for, I asked for the MMS settings. Please tell me someone has the right settings which work and don't make me have to deal with them. I'm sure I speak a different language...

I can't remember if Faria's rom had it in there, its pretty old now.
Do a search for network setup cab. Just do some reading to see if it is ok for you as some are country or network specific, a case in point is Circ_au's setup wizard, Australia only.

I've already tried using the O2 settings cab i did find, as I previously mentioned.
I was hoping someone had advice or settings which definitely work so I could establish whether it is a phone prob or an O2 problem.
I have been directed here but that didn't work either.

I've been on the phone to O2 again (I hoped 3rd time lucky... FAIL) but got the same instructions and the inability for someone working there to understand I have followed instructions, and I do understand how it works... and no the "automatic settings" are not working and no you haven't sent me the mms configuration ... the GPRS settings are not the same thing... wimper...
The outcome of the phonecall was that the person at the other end of the phone decided it is entirely to do with my handset and that i need to speak to TMobile.
.. having unlocked my handset about a year ago and having recently flashed my ROM. I now have a very happy phone and its makeover is spiffing, I don't think it will be a Tmobile thing. ... cept I still don't get MMS. I keep getting a message "error synchronising" when i try a send/recieve.
Is there something I'm missing? I've tried and O2 settings cab and that didn't work. I've been on filesaveas and tried their settings still no joy.
Is there some form of wee thing i'm missing that Tmobile have hidden in there that would prevent me from using MMS? Or is the person at O2 BSing me ... cos they obviously haven't got a clue?
Any instructions or advice welcome.

Okay update is that I spoke to O2 again and got them to check my mms is set up and that my number has been properly ported across. Just in case. According to them all was good, but just in case they were going to switch off my mms then switch it on again and see if that works.
I've run through some settings (after waiting an hour to make sure they had plenty time to make sure they had finished fiddling.) and still no luck. still getting "error synchronising"
any more suggestions? I've a feeling there may be something somewhere that is really obvious and i'm missing something.

More update. Someone suggested that the porting problem may have stemmed from Tmobile not setting up their end of the porting of their number properly. This person managed to sort something out with them, so I phoned Tmobile to see what they can do for me.
... 15 min later and I'm no further forward, however the guy was really really keen to help and was trying to suggest idea's. Eventually I admitted defeat though he seemed really disappointed not being able to solve my problem. It was kinda sweet.
So as long as we trust the folk i've spoken to, O2 and Tmobile have got everything sorted... so it should just be a phone problem... most likely my settings
but its still not working. I'm still getting an error synchronising message when i hit send/recieve and nothing is sending from my phone.

Okay. I'm such a noob!!!
Forgot to hard reset after flashing my rom... I appear to be having limited success MMSing now. I say limited i've a couple of mates getting the weblink rather than the picture, but at least I know it isn't a phone problem!!!
Hopefully my witterings will help someone else with similar problem.
Thanks for all the help.

Herm300 flash
Hi friends, I really need your help now 'cos i just messed up my phone Herm300. Actually the network service was out and i attempted to flash the ROM with the hope it will solve the problem then it got stuck in the four color screen showing HERM300, IPL-1.01 and HERM300, SPL-1.40.olipro on the top left of the sreen. Hard and soft reset would not help. i used the RUU_MAINENTRY. kindly help me recover the phone. Thanks

[q] htc elf bricked showing tri colour

hi
I have got a bricked HTC ELF with a tri-colour screen.(red, green and blue). I did try matty.exe and found that cid is locked. g_cKeyCardSecurityLevel = FF
I dont have the original firmaware backed up. and could not find anywhere on this site and internet.
device id: ELF010050
cid: HTC E11
IPL 1.17.002
SPL: 1.17.0000
Is there any way to find the original rom or is there any way to unlock the cid and then just put any rom on it? I dont have the working pda or wm device to do goldcard method. I know there is way to do the goldcard method without the WM device but then I need a desktop or laptop with a PCI or internal cardreader installed whereas I have got a usb card reader.
can usb card reader do the goldcard method without the wm device?
any suggestion will be appreciated since it has been almost 3 years for me to get my device back to life.
regards
plz suggest.
regards

Hi mate,
All info you need is in the stickies and /or using search function. You need to unlock cid and flash custom rom. BTW tri-colour screen is called Bootloader.
Ps: there was no reason to open a new thread for that ...

hi
thanx for the reply
I have been reading the stickies but could not find
the specific soultion for my problem. can u send me a link or step by step instruction?
regards

Moved to general as this does not belong in development.
There's no need for a step by step guide, all the information is in the wiki or stickies.

hi
I have runout of options and tried almost all. still no success. I was asked to
read stickies which I did but still no use.
no one seems to be answering the question. haha
anyway I have not given up hope.
regards

Yea!! That's the spirit

I can answer to the card reader: as far as I know it has to be an on board reader, otherwise it masks/hides something with the cardid.

hi
hmmm. so that means cardreader option has gone too. haha.
anyway thanx for letting me know that.
so the only option left for me is too wait for someone to send the original
rom so that I can download it and put on my HTC P3450.
regard

I wouldnt hand around for too long waiting for someone to upload the stock firmware, it may never happened to be honest.
Do you know the original operator for the phone? It is possible, at a push, that it may be lurking on a website still, just hard to find. That could possibly yeild a result, hopefully.
If you post, I may have a look - but again, I can't promise anything!

captainstu72 said:
I wouldnt hand around for too long waiting for someone to upload the stock firmware, it may never happened to be honest.
Do you know the original operator for the phone? It is possible, at a push, that it may be lurking on a website still, just hard to find. That could possibly yeild a result, hopefully.
If you post, I may have a look - but again, I can't promise anything!
Click to expand...
Click to collapse
What's the damage if he tries all the roms, one after the other ? If there's none, gogagogi might get lucky

His phone is still CID locked. I guess it could potentially be a brick. I think, that or it won't let you flash the rom at all. I forget which - been a while!
gogagogi: Have you tried seeing if you can flash ipl/spl from SD card - never been in the position you're in so just curious.

Hi
yes it is cid locked. I did try to flash few stock roms which I thought similar to the rom I have got
on my device through usb data cable but no luck. after 2% or 3% is says invalid vendor ID. then I tried through micro sd card but same result.
then I tried unbricker rom through usb and micro sd card but same result.
even I tried to change the vendor id through a softerare called xvi32. that is
a hex reader. open the .nbh file and change the vendor id but the result was no good. it said " the file or image has been corrupted"
and I never tried to flash ipl and spl.
regards

can you give the IPL/USPL a go to see what happens? (its a link to it for you)
Also, whats was your opertor, not sure if i missed it.

hi
when I bought it, it was on T-mobile. but it was sim free. thanx for the link.
I will have a look.
regards

t-mobile uk sorry or something else?

hi
it was on T-mobile NL.(netherlands).
I did have a look at the link u sent it to me.
after reading it, I found out that Microsoft ActiveSYnc has to be green first.(connected).
whereas it can not be connected, if the device is stuck on bootloader so this option has gone too.
the only option so far is, either I find out the original rom or if I can find out some matty.exe commands which can help me unlock the CID so that I can put any rom.
matty.exe is working fine so far.
so what do u think?
regards

gogagogi:
I don't appreciate the message you have sent to my personal in box to be honest, You're lucky I am replying to you at all!
When in bootloader does it say RUU at the top right? And does it pick up USB connection? Have you tried to flash via SDCARD the IPL/SPL roms?
I have a job, a daughter, and a live out side of XDA. If I do not reply to a thread, it means I am thinking, have missed it by accident, or am simply just too busy. I do not get paid to be here, I am not a moderator, I am just a member like yourself, I do not expect to get private messages hassling me to reply to a thread.
The Elf isnt even my main device. I use a HTC Hero (Android), and have done for quite a long time now. I look in here simply to help out other people who are still using this device.
Thanks, Stu

well it does say ruu text at the right top corner and it does say usb at the bottom.
as I said it does connect through Matty.exe.
well I did not mean to disturb you. I was just wondering cuz u were replying me before and then just stopped.
so mate you just chill.
ignore any previous questions from me.
regards

OKay, as the ruu is there, you should still be able to flash a from that point - I have done this a fair few times.
Have you tried the IPL/SPL yet?