Hello,
I´m trying to use my Jabra 5010 to command my Orbit 2 over the Voice Commander, but it doesn´t work.
Is there anybody able to command with the bluetooth headset as nice as it should be?
Thanks in advance.
Best regards
Mario
Related
Hi, i've just ordered an XDA IIi and i was wondering what BT headset you guys would recommend for use with it? and is it possible to use a BT headset to issue voice commands when using microsoft voice command? thanks
Hi all,
Few weeks ago I read in this forum, but I forgot whether is there any solution for above mention subject.
Is there any bluetooth that support Voice command? Or any bluetooth headset v1.2 is compatible with it?
Say that I like to have bluetooth headset that I need to press the button to call, to get appointment, etc just by say it to the headset.
This would be great as you have personal assistance
Regards,
Arto.
Hi,
I think it was me who posted the message but I still am looking for a peice of software for the MDA Compact that allows voice commands through my HBH600 - anyone?
Thanks
Msuk
As far as i know, this is not supported by the MS Stack used by the magician.
I don't get it. Everyone was saying that the Widcomm/Broadcom stack was no good for Voice Command, and now we've got Microsoft and their own stack is still no good.
So, who's manufacturing a stack that actually works?
I hear that the ETEN M-series (500, 600, perhaps earlier) works with Voice Command over the BT headset, so what stack are they using?
That the best thing I have ever heard, to be able to just push the button on the head set to give Voice command a request instead of pulling the phone out of your pocket all the time would be great.
Hi,
I used to be able to issue voice commands for my contacts when I had a SE P900. Also the callers name was announced in the BT and using my voice I could say 'Answer' or 'busy' why cant the MDA Compact be able to do this? MDA Compact get some many things right but gets a whole load of other functionality totally wrong :-(
Thanks
Msuk
Check this out...
Someone over at HowardForums.com's Pocket PC forum was able to tell me that the Eten M500 Pocket PC Phone Edition uses the Microsoft Bluetooth stack (although "enriched" or modified) and they apparently can use Voice Command over the Bluetooth headset, and even activate it by pushing the action button on the headset!
http://www.howardforums.com/forumdisplay.php?f=181 ... See "My new Eten M500" thread.
So, I'm asking anyone who's got the Extended ROM to upload it or post it somewhere so we can take a closer look!
Thanks people.
Anyone have o2 mini and Motorolla HS-850 bluetooth handsfree?
This handsfree is bluetooth v1.2. I am wondering if I can use this bluetooth for above purpose. Not perfect maybe, but at least I can get caller id readed by voice command better than sony HBH-660 caller id display.
Anyone with HS-850 please comment.
Thank you in advance.
Arto
I got a Qtek S100, just the MS BT stack and VCABT of course
I just bought a Jabra JX10 but here's what I can do:
-I can activate MS Voice Command
-I can answer calls
-I hear the ringtone in my headset when someone rings me
What I cant do:
-Hear the caller speaking
-The other end can NOT hear me either!
Does anyone know a solution to this, I would be highly greatful!!
Sincerely
Monty
Ps. I havent tried the bluesoil BT stack since I cant get it to work with Voice Command.
Solved
Problem solved. Reseted the BT device and removed and paired them again. Strange, but hey it works.
I've got a problem with Dopod 818 Pro's voice command software.
The software that is use is Cyberon VC 1.6, which is different from Jamin's Voice Speed Dial 1.1
Using Jamin's Voice Speed Dial 1.1 (I've flashed Jamin's rom), I can use bluetooth headset button to activate and dial very successfully every time.
However, when using Dopod's software (Cyberon VC 1.6), I can only activate the voice command once using my bluetooth headset's button. After that I cannot use it anymore and have to reboot the Dopod in order to make it work again. I noticed that after the headset is turned on, it never turns off again using this software.
I'm using a SC HBH-662, 818 Pro AKU2 WWE.
Do anyone experiences this problem? Is it a problem with my Headset instead of a software problem. (I'd need to consider replacing my bluetooth headset). If everyone is experiencing this problem with Dopod, then I think it is probably a software problem, or there are any registry setting that I can use to fix it?
I have noticed the same problem, though not everytime. It seems that if you use the software to dial a phone number, and then end the call, the headset shuts off and may or may not work again with voicecommand.
Anyway, yes, it's weird. I'm using a SE bluetooth headset as well, but I think it's software related.
Anyone not using Sony Ericsson bluetooth headset having the same problem? If yes, I think I'll just downgrade it back to imate rom.
Same Here!! I just loaded the new Dopod ROM and selected the few files from Ext ROM that I wanted and noticed that Cyberon Voice Commander worked once with the bluetooth headset (nxZen) then refused to work after that. Hopefully some genius here can help figure this out. Cyberon's VC seems really good, just need it to work over bluetooth.
voyager
Jabra headset same problem here.
AX2 and Plantronics Voyager same issue. I think it is similiar to the issue people are having with MS Voice Command on the Wizard using the Reg hack to redirect the BT Headset button to activate VC
I'm having the EXACT same problem, with the same headset (hbh662). Interestingly enough, I installed MS Voice Command side-by-side with Voice Commander. Once you activate Voice Commander the first time (and it makes the audio gateway connection to the BT headset), you can use MS Voice Command to issue commands through the headset. The problem is that it seems to only be able to do this once, and then you have to reset. The other thing I've noticed is that all audio is rerouted through the headset; if your phone rings while the BT gateway is active, you will only hear it in the headset (but you get to hear Voice Command anounce the caller). Ah well, at least it works for about 10 minutes per reset. :?
I have exactly the same problem with you guys with my SE HBH-610a and i.Tech Clip R35, and some other SE and i.Tech models which I have also tried. Can only activate once, and will not work again until a soft-reset. This has been like that since the shipped ROM, and the new ROM didn't fix this problem.
Voice command over BT on the i-Mate AKU2 rom works great though, and works 100% of the time!! Though both from same company Cyberon, the one on Dopod is VOICE COMMANDER, and the one on Imate is VOICE SPEED DIAL.
I have tried un-installing Voice Commander from my Dopod and installing Voice Speed Dial (from hack in this forum), but didn't get voicedialling over BT to work this way on the Dopod. Sigh!!
Has anyone contacted Dopod on this matter? If I-mate can implement Voicedialling over BT correctly, I don't see why Dopod can't!! I will write to Dopod. Can't imagine calling their hotline again...the last time I called, I had to wait at least 50mins before my call was answered.
Peter
Still no solution for this?
Still no solution for this issue? Isnt there a way to port/convert Project VCABT to the Prophet?
That would be more than great"!
I have the same problem plus it does not recognize my voice command. Alway dials a wrong person. :evil:
Any progress?
Dear Friends,
Has anyone had any progress with this issue? 3-rd party software? Maybe some bluetooth stack patches.
Please, if anyone has any valuable information to share, please do.
With warmest regards...
there is a major problem with the ROM
Until a new one is produced the BT will be stuffed
waiting for a new rom that manage fine drivers bluetooth, I have abdicated to useCVC with the ear wireless bluetooth.
now i trying to use wire original headset.
If i push the botton start dialer (in my case Phonex)
Someone can to explain me if is possible to change it and make start another program: Cyberon Voice Command ?
Thank's in advance
Gianluigi
Gen.Y DualBOOT
Gen.Y DualBOOT
daigc said:
Gen.Y DualBOOT
Click to expand...
Click to collapse
sorry i don't understand !
Remap headset button (wired)?!
Hi,
I also would like to know how I can remap the wired-headset button to an application of my choice (ie mp3player or Voice Command).
I successfully remaped the answer button on the phone, but can't with the headset.
Any help appreciated!
bye
Bluetooth Headset
It seems that current versions of MSVC and Cyberon products simply do not work with bluetooth headsets and our ACERs. MSVC actually states that it will not work with Widcomm stack devices in its release notes.
I don't know if we'll ever be able to press the talk button on our headset and be able to speak a voice tag to call someone or open a program. It's one of the biggest weaknesses of our device. If anyone knows of a program or a workaround, I'd love to know.
Alan