Jabra JX10 with a S100 audio problem!! - JAM, MDA Compact, S100 General

I got a Qtek S100, just the MS BT stack and VCABT of course
I just bought a Jabra JX10 but here's what I can do:
-I can activate MS Voice Command
-I can answer calls
-I hear the ringtone in my headset when someone rings me
What I cant do:
-Hear the caller speaking
-The other end can NOT hear me either!
Does anyone know a solution to this, I would be highly greatful!!
Sincerely
Monty
Ps. I havent tried the bluesoil BT stack since I cant get it to work with Voice Command.

Solved
Problem solved. Reseted the BT device and removed and paired them again. Strange, but hey it works.

Related

Bluetooth Headset with Voice Command compatiility

Hi all,
Few weeks ago I read in this forum, but I forgot whether is there any solution for above mention subject.
Is there any bluetooth that support Voice command? Or any bluetooth headset v1.2 is compatible with it?
Say that I like to have bluetooth headset that I need to press the button to call, to get appointment, etc just by say it to the headset.
This would be great as you have personal assistance
Regards,
Arto.
Hi,
I think it was me who posted the message but I still am looking for a peice of software for the MDA Compact that allows voice commands through my HBH600 - anyone?
Thanks
Msuk
As far as i know, this is not supported by the MS Stack used by the magician.
I don't get it. Everyone was saying that the Widcomm/Broadcom stack was no good for Voice Command, and now we've got Microsoft and their own stack is still no good.
So, who's manufacturing a stack that actually works?
I hear that the ETEN M-series (500, 600, perhaps earlier) works with Voice Command over the BT headset, so what stack are they using?
That the best thing I have ever heard, to be able to just push the button on the head set to give Voice command a request instead of pulling the phone out of your pocket all the time would be great.
Hi,
I used to be able to issue voice commands for my contacts when I had a SE P900. Also the callers name was announced in the BT and using my voice I could say 'Answer' or 'busy' why cant the MDA Compact be able to do this? MDA Compact get some many things right but gets a whole load of other functionality totally wrong :-(
Thanks
Msuk
Check this out...
Someone over at HowardForums.com's Pocket PC forum was able to tell me that the Eten M500 Pocket PC Phone Edition uses the Microsoft Bluetooth stack (although "enriched" or modified) and they apparently can use Voice Command over the Bluetooth headset, and even activate it by pushing the action button on the headset!
http://www.howardforums.com/forumdisplay.php?f=181 ... See "My new Eten M500" thread.
So, I'm asking anyone who's got the Extended ROM to upload it or post it somewhere so we can take a closer look!
Thanks people.
Anyone have o2 mini and Motorolla HS-850 bluetooth handsfree?
This handsfree is bluetooth v1.2. I am wondering if I can use this bluetooth for above purpose. Not perfect maybe, but at least I can get caller id readed by voice command better than sony HBH-660 caller id display.
Anyone with HS-850 please comment.
Thank you in advance.
Arto

Dopod 818 Pro Voice Command Bluetooth Activation Problem

I've got a problem with Dopod 818 Pro's voice command software.
The software that is use is Cyberon VC 1.6, which is different from Jamin's Voice Speed Dial 1.1
Using Jamin's Voice Speed Dial 1.1 (I've flashed Jamin's rom), I can use bluetooth headset button to activate and dial very successfully every time.
However, when using Dopod's software (Cyberon VC 1.6), I can only activate the voice command once using my bluetooth headset's button. After that I cannot use it anymore and have to reboot the Dopod in order to make it work again. I noticed that after the headset is turned on, it never turns off again using this software.
I'm using a SC HBH-662, 818 Pro AKU2 WWE.
Do anyone experiences this problem? Is it a problem with my Headset instead of a software problem. (I'd need to consider replacing my bluetooth headset). If everyone is experiencing this problem with Dopod, then I think it is probably a software problem, or there are any registry setting that I can use to fix it?
I have noticed the same problem, though not everytime. It seems that if you use the software to dial a phone number, and then end the call, the headset shuts off and may or may not work again with voicecommand.
Anyway, yes, it's weird. I'm using a SE bluetooth headset as well, but I think it's software related.
Anyone not using Sony Ericsson bluetooth headset having the same problem? If yes, I think I'll just downgrade it back to imate rom.
Same Here!! I just loaded the new Dopod ROM and selected the few files from Ext ROM that I wanted and noticed that Cyberon Voice Commander worked once with the bluetooth headset (nxZen) then refused to work after that. Hopefully some genius here can help figure this out. Cyberon's VC seems really good, just need it to work over bluetooth.
voyager
Jabra headset same problem here.
AX2 and Plantronics Voyager same issue. I think it is similiar to the issue people are having with MS Voice Command on the Wizard using the Reg hack to redirect the BT Headset button to activate VC
I'm having the EXACT same problem, with the same headset (hbh662). Interestingly enough, I installed MS Voice Command side-by-side with Voice Commander. Once you activate Voice Commander the first time (and it makes the audio gateway connection to the BT headset), you can use MS Voice Command to issue commands through the headset. The problem is that it seems to only be able to do this once, and then you have to reset. The other thing I've noticed is that all audio is rerouted through the headset; if your phone rings while the BT gateway is active, you will only hear it in the headset (but you get to hear Voice Command anounce the caller). Ah well, at least it works for about 10 minutes per reset. :?
I have exactly the same problem with you guys with my SE HBH-610a and i.Tech Clip R35, and some other SE and i.Tech models which I have also tried. Can only activate once, and will not work again until a soft-reset. This has been like that since the shipped ROM, and the new ROM didn't fix this problem.
Voice command over BT on the i-Mate AKU2 rom works great though, and works 100% of the time!! Though both from same company Cyberon, the one on Dopod is VOICE COMMANDER, and the one on Imate is VOICE SPEED DIAL.
I have tried un-installing Voice Commander from my Dopod and installing Voice Speed Dial (from hack in this forum), but didn't get voicedialling over BT to work this way on the Dopod. Sigh!!
Has anyone contacted Dopod on this matter? If I-mate can implement Voicedialling over BT correctly, I don't see why Dopod can't!! I will write to Dopod. Can't imagine calling their hotline again...the last time I called, I had to wait at least 50mins before my call was answered.
Peter
Still no solution for this?
Still no solution for this issue? Isnt there a way to port/convert Project VCABT to the Prophet?
That would be more than great"!
I have the same problem plus it does not recognize my voice command. Alway dials a wrong person. :evil:
Any progress?
Dear Friends,
Has anyone had any progress with this issue? 3-rd party software? Maybe some bluetooth stack patches.
Please, if anyone has any valuable information to share, please do.
With warmest regards...
there is a major problem with the ROM
Until a new one is produced the BT will be stuffed

Issues with my BT motorola headset and TyTN

I am encountering a problem where after some time (do not know how long exactly) my BT headset seems not to synchronize with my TyTN. So when an incoming call arrives I am unable to answer it using the BT headset. Also, when I try to use Voice dialing it efuses to use my BT headset.
Only when I do a soft reset it works.
any ideas?
I have the same problem with a SonyEricsson HBH-610A.
Some times the bluetooth stops it self and I have to activate it agan.
Today when I tried to install the headset again, it searched forever and then I got the message, "Problem with Internal Bluetooth Hardware" and a OK button??
Only when I do a soft reset it saves the problem.
It actually drives me nuts, because I want to answer calles when the TyTN is in its holster.
I am using a Plantronics 655 with my TyTN running VC 1.5 with the common registry hack and have similar problems but not exactly the same. I want to be able to initiate voice dialing via the headset but when VC repeats the command it comes through the phone speaker and not the headset which also means my confirmation of the command has to be through the phone rather than the headset. Also, when a call comes in my TyTN speaks the name and number of the calling party through the telephone speaker but only beeps in my headset. To me it should be speaking to me through the headset.
I'm trying to get down to the bottom of this issue so it can be resolved through coordinated pressure on the responsible party(s).
Any help I receive will go to help all BT users of VC on the TyTN.
I am using a Plantronics 655 with my TyTN running VC 1.5 with the common registry hack and have similar problems but not exactly the same. I want to be able to initiate voice dialing via the headset but when VC repeats the command it comes through the phone speaker and not the headset which also means my confirmation of the command has to be through the phone rather than the headset. Also, when a call comes in my TyTN speaks the name and number of the calling party through the telephone speaker but only beeps in my headset. To me it should be speaking to me through the headset.
I'm trying to get down to the bottom of this issue so it can be resolved through coordinated pressure on the responsible party(s).
Any help I receive will go to help all BT users of VC on the TyTN.

V1605 and voice dial / command over bluetooth

Sorry for what might be a newbie question but .....
just got a v1605 - hermes - and despite what looks like a perfect pairing with my plantronics bluetooth headset, I cannot hear my commands or responses from the voice dialer in the headset - they alwys come out through the PDAs speaker.
Is this a bug or something I can fix
Thanks
Same Problem
I have the MOT H700 BT headset and I cannot hear my confirmation voice dailer commands. Anyone know what the problem is.

Are you using your BA with any Voice Activation over Bluetooth

Does anybody here have a full functioning Voice command system with their bluetooth headset. (eg Voice command, Cyberon etc). That works through blue tooth?
I ask this because I have never seen it work, and have tried endless combinations and have about 6 Bluetooth headsets. It seems that only WM5 Helmi AKU 2.6 Rom managed this but cant be found.
Disregard option 3 and 4 in the Poll dont know how to take them out
EDITED!: I'm using Jabra BT headset with Cyberon - Voice Dialing DOESN'T WORK!
Motorola S9 headset working with Microsoft Voice Command. Although I must add that this headset is one of the most uncomfortable ones I have ever used, I have had it 1 week and plan on swapping it out for something else. Does anyone have any recomendations for a good single ear headset that has decent range with a BA. I know that is asking alot, but hey, nothing ventured nothing gained.

Categories

Resources