Hi all,
Few weeks ago I read in this forum, but I forgot whether is there any solution for above mention subject.
Is there any bluetooth that support Voice command? Or any bluetooth headset v1.2 is compatible with it?
Say that I like to have bluetooth headset that I need to press the button to call, to get appointment, etc just by say it to the headset.
This would be great as you have personal assistance
Regards,
Arto.
Hi,
I think it was me who posted the message but I still am looking for a peice of software for the MDA Compact that allows voice commands through my HBH600 - anyone?
Thanks
Msuk
As far as i know, this is not supported by the MS Stack used by the magician.
I don't get it. Everyone was saying that the Widcomm/Broadcom stack was no good for Voice Command, and now we've got Microsoft and their own stack is still no good.
So, who's manufacturing a stack that actually works?
I hear that the ETEN M-series (500, 600, perhaps earlier) works with Voice Command over the BT headset, so what stack are they using?
That the best thing I have ever heard, to be able to just push the button on the head set to give Voice command a request instead of pulling the phone out of your pocket all the time would be great.
Hi,
I used to be able to issue voice commands for my contacts when I had a SE P900. Also the callers name was announced in the BT and using my voice I could say 'Answer' or 'busy' why cant the MDA Compact be able to do this? MDA Compact get some many things right but gets a whole load of other functionality totally wrong :-(
Thanks
Msuk
Check this out...
Someone over at HowardForums.com's Pocket PC forum was able to tell me that the Eten M500 Pocket PC Phone Edition uses the Microsoft Bluetooth stack (although "enriched" or modified) and they apparently can use Voice Command over the Bluetooth headset, and even activate it by pushing the action button on the headset!
http://www.howardforums.com/forumdisplay.php?f=181 ... See "My new Eten M500" thread.
So, I'm asking anyone who's got the Extended ROM to upload it or post it somewhere so we can take a closer look!
Thanks people.
Anyone have o2 mini and Motorolla HS-850 bluetooth handsfree?
This handsfree is bluetooth v1.2. I am wondering if I can use this bluetooth for above purpose. Not perfect maybe, but at least I can get caller id readed by voice command better than sony HBH-660 caller id display.
Anyone with HS-850 please comment.
Thank you in advance.
Arto
Related
Can anyone tell me the truth ??? Is it possible or not ?
My previous GSM was a Motorola Timeport. When I had to telephone someone, I just spoke the name of that person, and my Motorola dialled the correct number.
For example I said "Parents", and the phone number of my parents was automatically dialled.
Can I do such thing with my BT headset Sony/ericsson HBH-35 and my Qtek 2020 ???
Some people say it is totaly impossibble ???
I cann´t tell you, if that would work, but i know, that you can use voice dial via some extra software. It works well.
What i don´t know, if you can use your BT for Voice recognition....
Stefan
Aha, thanks Stefan. ( we have almost the same flag - lol ! )
So voice-recognition would work, but only with the microphone of the Qtek itself, pobably not with bluetooth....
So I guess I have to use speed dial in the car...
yes, it´s possible with microsoft voice comand, try it¡¡ it´s very easy to install and very funny.
srlobo said:
yes, it´s possible with microsoft voice comand
Click to expand...
Click to collapse
I assume you mean that voice-dialing is possible, NOT voice-dialing through a BT headset. Right?
From all of the information I have gathered, voice-dialing through a BT headset is just not possible at this time. If you have gotten it to work, I'll bet there are thousands who would like to know how you did it! :wink:
yeah i believe that there is some bluetooth profile required
there are some threads about it somewhere in hacking it forum
Rudegar wrote:
yeah i believe that there is some bluetooth profile required
there are some threads about it somewhere in hacking it forum
Click to expand...
Click to collapse
I have searched and can find nothing that indicates that voice-dialing through BT works yet. There is a great deal of discussion, but no solution (that I can find). I believe that a BT HandsFree profile is required, but not included with the Himalaya BT implementation.
We can certainly hope that one is included in WM2003 SE, should that actually make it to this platform.
some people were talking about if it was possible to use the ipaq bluetooth stack on a xda2 if that works
I'm using Voice Dial sinse 3 month and it works grate. Even in the car I can ask any contact of my data base ( +/-1000) name of contact + mobile or at home etc... The program ask you for confirmation by reading once more the contact name and asks if this is correct.
If you say "yes" it compose the request phone number.
I'm using HBH 65 BT headset for phone and the intergreted micro from Qtek for voice recognition.
Try it for free at : http://www.fonix.com/page.cfm?name=product_fonix_voicedial&ID=14
I have the french version
So Kiyeko -
Are you saying that you can press the button on your BT headset, say a name from your contacts list into the microphone on the headset and the i-mate/XDA II/MDA II/QTEK 2020 will dial the number? If so, I would be interested to know what software recognizes the headset button-press as the initiator of the voice-dialing software.
I have tried Pocket BT Tools with Fonix Voice Dial and was never able to get it to recognize the headset button press as the initiator of the program. Oh, by the way - I tried it with the MS program as well.
Returning to the initial question posted by mvb95.
Yes, with your hardware (Qtek 2020 and HBH35) is possible to use voice recognition to put the calls.
You must install Vito Voice Dialer PE v3.0. Eventually assign a hardware button to the voice dialer. Record all the tag voices you want.
With both devices paired and turned on (HBH35 blinking green), press the hardware button assigned to Vito and say the tag (e.g.: “John”) to the headset. You don’t need to use the Qtek speaker, don’t need to press the HBH35 button, nor confirm the recognition with “yes”, like in the Fonix.
Is simple and ease.
vmgps wrote:
say the tag (e.g.: “John”) to the headset.
Click to expand...
Click to collapse
Are you SURE it is using the headset microphone to input the name? I have downloaded and installed the program, then set a hardware button and recorded some voice tags.
When I press the hardware button, it does not activate my HBH-30 to input the tag, it records it with the device's microphone.
Are you using Pocket BlueTooth tools?
Hi Brian:
I use it always in my car.
My hardware: Qtek 2020 (Rom: 1.72.00WWE, Radio version: 1.14.00) and headset SE HBH-35.
I have tried several times covering the microphone hole with my finger and, by other side, speak to the headset 2 or 3 meters away from the Qtek.
With Vito you don’t need to say “Call John” but only “John”.
I don’t use the Pocket Bluetooth Tools because the latest Rom has the Bluetooth headset profile improved and this software doesn’t work with my car kit handsfree Nokia.
I can’t put my hands on fire, but the only thing I’m sure is that I can talk normally with the Vito Voice Dialer and the headset in my car.
Does any known how to detect when user press answer button on headset? What event or message generated by system? I find only some event that occurs when user insert headset jack in phone.
The AG service gets a "AT+CKPD=200" message
What i'm interestet in ; How do you send these AT commands ?
I'm sorry, but what is "AG service"?
Audio Gateway.
As far as I remember WM5 has standart API to register AG message handler. WM2003SE and older don't have a standart way.
It's not good. I'm interested in WM2003
Voice Dialing via Bluetooth NOT available on Atom
I thought that when I bought my Atom I would have voice dialing over a Bluetooth Headset. My friend has an Exec and it works fine. However, not with the Atom. Even the latest ROM doesn't support it. I have 4 headsets, all pair in Handsfree profile, all have call answering, call ending and last number re-dial working perfectly, but none will initiate voice dialing with the Atom, but all will voice dial with my Nokia 6230.
Therefore it is not a WM5 built in feature and is still ROM dependant. It doesn't matter whether you use the built in voice program, Vito, Neuvoice or M$ Voicedial, the stack simply won't support the AT command.
C'mon O2, it's about the only thing that is crook with the Atom. Other than that it is just the worlds best pda/phone!
Re: Voice Dialing via Bluetooth NOT available on Atom
Camstech said:
I thought that when I bought my Atom I would have voice dialing over a Bluetooth Headset. My friend has an Exec and it works fine. However, not with the Atom. Even the latest ROM doesn't support it. I have 4 headsets, all pair in Handsfree profile, all have call answering, call ending and last number re-dial working perfectly, but none will initiate voice dialing with the Atom, but all will voice dial with my Nokia 6230.
Therefore it is not a WM5 built in feature and is still ROM dependant. It doesn't matter whether you use the built in voice program, Vito, Neuvoice or M$ Voicedial, the stack simply won't support the AT command.
C'mon O2, it's about the only thing that is crook with the Atom. Other than that it is just the worlds best pda/phone!
Click to expand...
Click to collapse
Couldn't agree more!
About voice dialer. I thought it was just because Atom needs bluetooth headset button to be pressed for a while to launch dialer. It acts so with wired headset. Unfortunately, i have just one bluetooth headset to play with. And it turns off after 2 sec. holding the button.
On my Dopod 818pro everything acts like a charm (VD runs after a single press), so it isn't a WM5 bug.
can someone enable activating MS Voice Command from a wired headset for WM5?
it would be greatly appreciated.
Thanks,
I have the same problem using a bluetooth headset but if I use the wired headset supplied with my Atom it works fine.
that's good news. so, many OEMs are realizing the importance of this feature. so far, they have it in the Treo 700w and according to you, the Atom.
btw, did you have MS Voice Command pre-installed in your Atom, or did you buy it separately?
thanks,
The talk button on the wired headset is a "fake" button. It generates an special pattern in the recorded audio that it's recognized by the phone application.
It generates an special pattern in the recorded audio that it's recognized by the phone application.
Click to expand...
Click to collapse
Are you sure about that?
I've disembled quite a few headsets and the usual way is to shortcircut the mic-wire with one of the stereo-wires, whitch in return has to be cought by the mainboard and then translated to a command.
I'm not sure, but seems pretty feasible. That button is only used by the phone applicacion, which needs to open the wave input device.
Detecting the button pressing is pretty simple: recording at 16 bits, the average of the absolute value of the samples in complete silence is at least 100, with the talk button pressed, 6 or 7.
I've got a problem with Dopod 818 Pro's voice command software.
The software that is use is Cyberon VC 1.6, which is different from Jamin's Voice Speed Dial 1.1
Using Jamin's Voice Speed Dial 1.1 (I've flashed Jamin's rom), I can use bluetooth headset button to activate and dial very successfully every time.
However, when using Dopod's software (Cyberon VC 1.6), I can only activate the voice command once using my bluetooth headset's button. After that I cannot use it anymore and have to reboot the Dopod in order to make it work again. I noticed that after the headset is turned on, it never turns off again using this software.
I'm using a SC HBH-662, 818 Pro AKU2 WWE.
Do anyone experiences this problem? Is it a problem with my Headset instead of a software problem. (I'd need to consider replacing my bluetooth headset). If everyone is experiencing this problem with Dopod, then I think it is probably a software problem, or there are any registry setting that I can use to fix it?
I have noticed the same problem, though not everytime. It seems that if you use the software to dial a phone number, and then end the call, the headset shuts off and may or may not work again with voicecommand.
Anyway, yes, it's weird. I'm using a SE bluetooth headset as well, but I think it's software related.
Anyone not using Sony Ericsson bluetooth headset having the same problem? If yes, I think I'll just downgrade it back to imate rom.
Same Here!! I just loaded the new Dopod ROM and selected the few files from Ext ROM that I wanted and noticed that Cyberon Voice Commander worked once with the bluetooth headset (nxZen) then refused to work after that. Hopefully some genius here can help figure this out. Cyberon's VC seems really good, just need it to work over bluetooth.
voyager
Jabra headset same problem here.
AX2 and Plantronics Voyager same issue. I think it is similiar to the issue people are having with MS Voice Command on the Wizard using the Reg hack to redirect the BT Headset button to activate VC
I'm having the EXACT same problem, with the same headset (hbh662). Interestingly enough, I installed MS Voice Command side-by-side with Voice Commander. Once you activate Voice Commander the first time (and it makes the audio gateway connection to the BT headset), you can use MS Voice Command to issue commands through the headset. The problem is that it seems to only be able to do this once, and then you have to reset. The other thing I've noticed is that all audio is rerouted through the headset; if your phone rings while the BT gateway is active, you will only hear it in the headset (but you get to hear Voice Command anounce the caller). Ah well, at least it works for about 10 minutes per reset. :?
I have exactly the same problem with you guys with my SE HBH-610a and i.Tech Clip R35, and some other SE and i.Tech models which I have also tried. Can only activate once, and will not work again until a soft-reset. This has been like that since the shipped ROM, and the new ROM didn't fix this problem.
Voice command over BT on the i-Mate AKU2 rom works great though, and works 100% of the time!! Though both from same company Cyberon, the one on Dopod is VOICE COMMANDER, and the one on Imate is VOICE SPEED DIAL.
I have tried un-installing Voice Commander from my Dopod and installing Voice Speed Dial (from hack in this forum), but didn't get voicedialling over BT to work this way on the Dopod. Sigh!!
Has anyone contacted Dopod on this matter? If I-mate can implement Voicedialling over BT correctly, I don't see why Dopod can't!! I will write to Dopod. Can't imagine calling their hotline again...the last time I called, I had to wait at least 50mins before my call was answered.
Peter
Still no solution for this?
Still no solution for this issue? Isnt there a way to port/convert Project VCABT to the Prophet?
That would be more than great"!
I have the same problem plus it does not recognize my voice command. Alway dials a wrong person. :evil:
Any progress?
Dear Friends,
Has anyone had any progress with this issue? 3-rd party software? Maybe some bluetooth stack patches.
Please, if anyone has any valuable information to share, please do.
With warmest regards...
there is a major problem with the ROM
Until a new one is produced the BT will be stuffed
Hello,...
I am new here and thought you might help me with my little problem.
I allready searched the forum for that issue, but i did not find a real solution, so maybe someone can help me find a solution. Btw. please excuse my bad englisch, i am from Germany and really try my best.
Well, i have a german XDA Mini with BigStorage Rom 1.12.01 GER and Windows Mobile 2003.
I really have 2 problems now with the use of Microsoft Voice Command 1.5 and a Bluetooth Headset (not with Handsfree Profile).
My first Problem is, how can i make the Software response on pressing one of the 2 Headset Buttons. I really would like to initiate voice dialing with that so that i can leave the phone in my bag or whereever. I read something about a registry change, but i don't have that registry key, so maybe i need to install another software for that first.
If anybody could give me a easy to understand way to activate that, that would be really great.
My second Problem is, how can i use my BT Headset for the Audio Output. I can't hear the voice of Voice Command in the Earphone, it only plays on the XDA Mini itself. I downloaded a Bluetooth Stach Patch which gave me the option to stream audio to headset, abut my Headset isn't show in the list, and it does not work. I tried a Headset with Handsfree Profile from Plantronics (M3000), but it also did not show in the list. Can anyone help me with this ?
Well if could get this to work somehow that would be really really great...
Thanks in advance...
Thalys :?: :?:
Funny...I was researching this almost exactly as you were posting (research starting at XDA-Developers, of course!)
I found a rather distressing article at http://blogs.msdn.com/windowsmobile/archive/2006/02/03/524289.aspx that basically says that Microsoft Voice Command doesn't work over Bluetooth. HOWEVER, responses to the article reveal the registry hack to set Voice Command to the default Bluetooth dialer. It is:
HKLM\Software\OEM\VoiceCommand\Path=\Program Files\Voice Command\voicecmd.exe
I tried this on my Cingular 8125 with Motorola H500. Have to press the button twice (a problem also documented in the responses), and recognition is reduced, but it works! Voice Command audio is also piped to my headset.
--BennTech
Well, thanks alot for this tip, but it doesen't work for me. I tried changig the value to the path where my Voice Command is installed, but it did not do anything.
I think this is because i don't have a voice dialing software at all istalled on my device. Maybe i need to install another software first to activate the bluetooth support itself and than change the path to the program.
I figured out that i can make a redial with my headset without installing any software, so maybe there is a way to change this option to start voicecmd.exe.
I looked over the registry to find the key where the redial is initiated, but can't fins anything.
Has anyone done something like that ? I guess this is the only way to use voice command with BT Headset...
For all your help, thanks in advance...
Thalys
Sorry for Doublepost, but i wanted to say that the activation is now possible with the VCABT Project hack. That works now perfectly.
The only thing i wonder about is, is the mic in the headset used to recognize the voice ? Sometimes it is like still the mic in the machine is used.
I now only need a way to transfer the system audio to my headset... is that possible somehow ???
Thanks ... Thalys
@Thalys: If you'd know how to use a forum in the first place this whole thread wouldn't exist at all! It's all answered in the thread regarding the VCABT project. Since you found out about it I wonder why are posting those kinda questions... :roll:
Ok, sorry for that thread, it can be closed...
I did not read all the thread and thought that maybe another way is possible.
I now will keep an eye on the VCABT Project Thread to see if there is news to get this working...
Thanks for all your support... please Close
Thalys
well, voice command automaticcaly pauses the music playback, if you push the VC-Button (Camera-Button at the moment), to listen what you have to say trough the microphone of the HEADSET! So we really need "only" a possibillity to use the Headset-Button instead of for example the camera button. Everything else works quite good. :roll:
Microsoft Voice Command over BT : It works for me
BennTech said:
F
I tried this on my Cingular 8125 with Motorola H500. Have to press the button twice (a problem also documented in the responses), and recognition is reduced, but it works! Voice Command audio is also piped to my headset.
--BennTech
Click to expand...
Click to collapse
I m using Wizard and samsung SBH100 stereo BT and it works fine for me.
When I press the bt500's headset button to activate voice command I still have to speak into the trinitys built-in microphone and the responses come from the built-in speaker.
I've had a look around and the solutions so far seem to be for wm6, im still on wm5, or reg updates for keys I dont seem to have.
My apologies if I have missed anything obvious but is there a solution for this problem?
Also while im here is there a way to turn off the confirmation request for dialing contacts through voice command.
I'm having the same issues. I owned an imate Jamin before the this and it worked perfectly. I understand the jamin was manufactured by HTC so I do not know why the p3600 doesnt work.
Will Hermes Fix work?
Does the hermes fix for the voice command 1.6 issues work on the trinity?
http://wiki.xda-developers.com/index.php?pagename=Hermes_Utils