Database Users

How to make Voice Command respond on BT Headset Button ?

Hello,...
I am new here and thought you might help me with my little problem.
I allready searched the forum for that issue, but i did not find a real solution, so maybe someone can help me find a solution. Btw. please excuse my bad englisch, i am from Germany and really try my best.
Well, i have a german XDA Mini with BigStorage Rom 1.12.01 GER and Windows Mobile 2003.
I really have 2 problems now with the use of Microsoft Voice Command 1.5 and a Bluetooth Headset (not with Handsfree Profile).
My first Problem is, how can i make the Software response on pressing one of the 2 Headset Buttons. I really would like to initiate voice dialing with that so that i can leave the phone in my bag or whereever. I read something about a registry change, but i don't have that registry key, so maybe i need to install another software for that first.
If anybody could give me a easy to understand way to activate that, that would be really great.
My second Problem is, how can i use my BT Headset for the Audio Output. I can't hear the voice of Voice Command in the Earphone, it only plays on the XDA Mini itself. I downloaded a Bluetooth Stach Patch which gave me the option to stream audio to headset, abut my Headset isn't show in the list, and it does not work. I tried a Headset with Handsfree Profile from Plantronics (M3000), but it also did not show in the list. Can anyone help me with this ?
Well if could get this to work somehow that would be really really great...
Thanks in advance...
Thalys :?: :?:

Funny...I was researching this almost exactly as you were posting (research starting at XDA-Developers, of course!)
I found a rather distressing article at http://blogs.msdn.com/windowsmobile/archive/2006/02/03/524289.aspx that basically says that Microsoft Voice Command doesn't work over Bluetooth. HOWEVER, responses to the article reveal the registry hack to set Voice Command to the default Bluetooth dialer. It is:
HKLM\Software\OEM\VoiceCommand\Path=\Program Files\Voice Command\voicecmd.exe
I tried this on my Cingular 8125 with Motorola H500. Have to press the button twice (a problem also documented in the responses), and recognition is reduced, but it works! Voice Command audio is also piped to my headset.
--BennTech

Well, thanks alot for this tip, but it doesen't work for me. I tried changig the value to the path where my Voice Command is installed, but it did not do anything.
I think this is because i don't have a voice dialing software at all istalled on my device. Maybe i need to install another software first to activate the bluetooth support itself and than change the path to the program.
I figured out that i can make a redial with my headset without installing any software, so maybe there is a way to change this option to start voicecmd.exe.
I looked over the registry to find the key where the redial is initiated, but can't fins anything.
Has anyone done something like that ? I guess this is the only way to use voice command with BT Headset...
For all your help, thanks in advance...
Thalys

Sorry for Doublepost, but i wanted to say that the activation is now possible with the VCABT Project hack. That works now perfectly.
The only thing i wonder about is, is the mic in the headset used to recognize the voice ? Sometimes it is like still the mic in the machine is used.
I now only need a way to transfer the system audio to my headset... is that possible somehow ???
Thanks ... Thalys

@Thalys: If you'd know how to use a forum in the first place this whole thread wouldn't exist at all! It's all answered in the thread regarding the VCABT project. Since you found out about it I wonder why are posting those kinda questions... :roll:

Ok, sorry for that thread, it can be closed...
I did not read all the thread and thought that maybe another way is possible.
I now will keep an eye on the VCABT Project Thread to see if there is news to get this working...
Thanks for all your support... please Close
Thalys

well, voice command automaticcaly pauses the music playback, if you push the VC-Button (Camera-Button at the moment), to listen what you have to say trough the microphone of the HEADSET! So we really need "only" a possibillity to use the Headset-Button instead of for example the camera button. Everything else works quite good. :roll:

Microsoft Voice Command over BT : It works for me
BennTech said:
F
I tried this on my Cingular 8125 with Motorola H500. Have to press the button twice (a problem also documented in the responses), and recognition is reduced, but it works! Voice Command audio is also piped to my headset.
--BennTech
Click to expand...
Click to collapse
I m using Wizard and samsung SBH100 stereo BT and it works fine for me.

Assign function to wired headset talk button?

Please note that I am asking about the original wired/USB headset that is shipped with the Hermes, *not* a bluetooth headset.
Is there any way to assign a function (such as Voice Command) to the push-to-talk button on the wired headset?
There is a program available for the Wizard that does this:
"Talk Button Detector":
http://forum.xda-developers.com/showthread.php?t=264308&highlight=talk+button+detector
Unfortunately this program does not appear to work on the Hermes, and the source code is not linked.
Any help is appreciated.

Have the same problem
I'd also like to use the genuine HTC wired headset (the one which comes with PDA) to make calls using Microsoft Voice Command. But the button calls embedded dialer instead of Voice commander. Any ideas how to fix this?

[Q] [SOLVED] Change redial of wired headset to start MVC

I've read around and discovered that the HTC wired headset button only does pick up, and hang up. By pressing it twice it redials. I understood that a long press of this button can't be assigned.
I would like to change the double press option on the wired headset to activate Microsoft Voice Command. Is there a registry hack for this?

*Bump*
Or do I have to switch to a bluetooth headset.

erwindevries said:
*Bump*
Or do I have to switch to a bluetooth headset.
Click to expand...
Click to collapse
Unless something has changed...I think the only way to activate MSVC remotely is to use a bluetooth headset. It is a pain if you use nice sounding wired headphones and still need to drag out your phone to make a call. I can't believe WM hasn't fixed this issue. I had a voice dial button on my Sony Ericsson P800 headset from ...uh...6 years ago??? I hope someone proves me wrong because I listen to music all the time with a wired headset through an iPhone headset/mic adapter.

Here you go, all done:
http://forum.xda-developers.com/showthread.php?p=3235694#post3235694
V

vijay555 said:
Here you go, all done:
http://forum.xda-developers.com/showthread.php?p=3235694#post3235694
V
Click to expand...
Click to collapse
Thanks. I am now able to start MVC by double pressing the button on the wired headset.
I did so, by replacing:
\Windows\redial.exe
with a copy of \Program Files\MS Voice Command\voicecmd.exe
Now I can control my MP3's and dial whomever I want without reaching for my phone.

This didn't work with bluetooth redial.
Any ideas how to change the bluetooth redial command to something else ?

Nice one... was away to post the same question.
Glad I searched first
Thanks!

Programing Bluetooth button with Cyberon Voice Command

Hi.
I have Samsung wep250 Bluetooth headset, till now main button work on two ways:
- short touch call last dialed number
- long touch and release after first short beep call "voice command"
Long mode work perfect on Nokia N95, but now i have HTC Touch 2 Mega, witch was no any Voice command soft installed by default, so i install "Cyberon Voice Command" soft for tests and it work perfect, just call voice command from bluetooth headset not work.
Is there is some registry option or patch or else way to put this working?

Ygrek-Ix said:
Hi.
I have Samsung wep250 Bluetooth headset, till now main button work on two ways:
- short touch call last dialed number
- long touch and release after first short beep call "voice command"
Long mode work perfect on Nokia N95, but now i have HTC Touch 2 Mega, witch was no any Voice command soft installed by default, so i install "Cyberon Voice Command" soft for tests and it work perfect, just call voice command from bluetooth headset not work.
Is there is some registry option or patch or else way to put this working?
Click to expand...
Click to collapse
I have the same problem

http://forum.mobione.pl/index.php?topic=5775.0
this may help you (website polish)

MusX said:
this may help you (website polish)
Click to expand...
Click to collapse
Unfortunately, it does not work on Touch2. Besides, technical support of Cyberon wrote: "it depends on the phone vendor to decide whether they will enable this function or not. For more bluetooth supporting details, please refer to the phone vendor's technical support personnel."

Sugestion
Under "HKLM\SOFTWARE\OEM\VoiceCommand" : Path = \Windows\sddialer.exe
Work ok

Ygrek-Ix said:
Under "HKLM\SOFTWARE\OEM\VoiceCommand" : Path = \Windows\sddialer.exe
Work ok
Click to expand...
Click to collapse
Please describe in more detail what you did. In the Windows folder there is no such file as sddialer.exe.

Ups my mistake, this entry is for Microsoft Voice Command software.
For Cyberon i don't know, but about this soft: it will be perfect if this soft could also announce incoming calls.

I want to "revive" this old Thread, because i have the same problem. Maybe there is an resolution out there...?
Of course there is a little Workarround: When you start the Cyberon Voice Command-Software on your Touch and then directly press the Button on your BT-Headset the Voice-Command over the Headset works.....

HandsFree is not VoiceDial
Same problem and very unlucky for this, want to use Mega with bluetooth headset and voice dial.
Tried VoiceCommander, VoiceCommand and SpeedDial, all work but do not dial with pushing Bluetooth headset button.
Changed a lot of registry paths comparing Mega registry with my old HTC Herald (which support this feature) but nothing helps.
Asked HTC Customer Helpdesk and got the following answer: Mega support HandsFreeProfile which means car and headset connection for incomming calls - but not for outgoing calls. They further stated that MS stopped this feature generel in WM6.5 and provide extra programms only for special phones which are extra noted as "support voice dialing".
So it seams to be a problem of the current bluetooth stack in WM6.5.

Anybody got MS VoiceCommand / BlueAudio to work?

I used to have VoiceCommand and BlueAudio perfectly working on my X1. Now this crappy X2 that messes up so much, canNOT run any Audio to the Bluetooth Headset.
It should have the MS Bluetooth Stack so these programs should work. Perhaps it is some registry change that makes them work?
Anybody got them to work and know how to? Thanks!
It seems that the Bluetooth AudioGateway dll files is not working properly. Tried different dll's from different versions but still did not find the "correct" working one. Anybody???

Couldn't get MS Voice Command working.
Vito Voice Dialer works great though.
Haven't managed to make my X2 work with my existing bluetooth headset.
X2 says it's paierd with the device, but then you can't answer calls or anything else.
If it wasn't for the $$$ I spent to buy this piece of crap, I'd have a new phone already!

Okay, is this vito voice dialer dialing VIA bluetooth or not? And HOW do you press a key on the phone to activate it? What key? And just read their manual, they don't even mention any bluetooth capability there. Can you use bluetooth and how?
Because voice command works (more or less) HOWEVER NOT via bluetooth and since there is NO hard/software button to assign to it, it cannot be activated via the phone either!
I have to press the bluetooth button and then the sound (mic and voice) come out of the phone speaker.
I strongly think this has to do with the bluetooth gateway SE is using with the X2. But I was hoping somebody technical could have found a solution by now. For me voice dialing is essential and my X1 was perfect.
With blue audio I could listen to musik on a mono bluetooth!
Just to mention it, I use SE hbh-PV740 and it always works if making 'regular' calls via the phone over bluetooth. But I cannot initiate it nor voice dial.

I can't get my X2 to do anything with my bluetooth kit, so all your questions re: bluetooth I can't answer.
I start vito from a button on the screen and it works.
For me and my phone, the vito product is much more accurate and reliable than voice command.