Database Users

Voice recognition with Qtek 2020: possible or not ???

Can anyone tell me the truth ??? Is it possible or not ?
My previous GSM was a Motorola Timeport. When I had to telephone someone, I just spoke the name of that person, and my Motorola dialled the correct number.
For example I said "Parents", and the phone number of my parents was automatically dialled.
Can I do such thing with my BT headset Sony/ericsson HBH-35 and my Qtek 2020 ???
Some people say it is totaly impossibble ???

I cann´t tell you, if that would work, but i know, that you can use voice dial via some extra software. It works well.
What i don´t know, if you can use your BT for Voice recognition....
Stefan

Aha, thanks Stefan. ( we have almost the same flag - lol ! )
So voice-recognition would work, but only with the microphone of the Qtek itself, pobably not with bluetooth....
So I guess I have to use speed dial in the car...

yes, it´s possible with microsoft voice comand, try it¡¡ it´s very easy to install and very funny.

srlobo said:
yes, it´s possible with microsoft voice comand
Click to expand...
Click to collapse
I assume you mean that voice-dialing is possible, NOT voice-dialing through a BT headset. Right?
From all of the information I have gathered, voice-dialing through a BT headset is just not possible at this time. If you have gotten it to work, I'll bet there are thousands who would like to know how you did it! :wink:

yeah i believe that there is some bluetooth profile required
there are some threads about it somewhere in hacking it forum

Rudegar wrote:
yeah i believe that there is some bluetooth profile required
there are some threads about it somewhere in hacking it forum
Click to expand...
Click to collapse
I have searched and can find nothing that indicates that voice-dialing through BT works yet. There is a great deal of discussion, but no solution (that I can find). I believe that a BT HandsFree profile is required, but not included with the Himalaya BT implementation.
We can certainly hope that one is included in WM2003 SE, should that actually make it to this platform.

some people were talking about if it was possible to use the ipaq bluetooth stack on a xda2 if that works

I'm using Voice Dial sinse 3 month and it works grate. Even in the car I can ask any contact of my data base ( +/-1000) name of contact + mobile or at home etc... The program ask you for confirmation by reading once more the contact name and asks if this is correct.
If you say "yes" it compose the request phone number.
I'm using HBH 65 BT headset for phone and the intergreted micro from Qtek for voice recognition.
Try it for free at : http://www.fonix.com/page.cfm?name=product_fonix_voicedial&ID=14
I have the french version

So Kiyeko -
Are you saying that you can press the button on your BT headset, say a name from your contacts list into the microphone on the headset and the i-mate/XDA II/MDA II/QTEK 2020 will dial the number? If so, I would be interested to know what software recognizes the headset button-press as the initiator of the voice-dialing software.
I have tried Pocket BT Tools with Fonix Voice Dial and was never able to get it to recognize the headset button press as the initiator of the program. Oh, by the way - I tried it with the MS program as well.

Returning to the initial question posted by mvb95.
Yes, with your hardware (Qtek 2020 and HBH35) is possible to use voice recognition to put the calls.
You must install Vito Voice Dialer PE v3.0. Eventually assign a hardware button to the voice dialer. Record all the tag voices you want.
With both devices paired and turned on (HBH35 blinking green), press the hardware button assigned to Vito and say the tag (e.g.: “John”) to the headset. You don’t need to use the Qtek speaker, don’t need to press the HBH35 button, nor confirm the recognition with “yes”, like in the Fonix.
Is simple and ease.

vmgps wrote:
say the tag (e.g.: “John”) to the headset.
Click to expand...
Click to collapse
Are you SURE it is using the headset microphone to input the name? I have downloaded and installed the program, then set a hardware button and recorded some voice tags.
When I press the hardware button, it does not activate my HBH-30 to input the tag, it records it with the device's microphone.
Are you using Pocket BlueTooth tools?

Hi Brian:
I use it always in my car.
My hardware: Qtek 2020 (Rom: 1.72.00WWE, Radio version: 1.14.00) and headset SE HBH-35.
I have tried several times covering the microphone hole with my finger and, by other side, speak to the headset 2 or 3 meters away from the Qtek.
With Vito you don’t need to say “Call John” but only “John”.
I don’t use the Pocket Bluetooth Tools because the latest Rom has the Bluetooth headset profile improved and this software doesn’t work with my car kit handsfree Nokia.
I can’t put my hands on fire, but the only thing I’m sure is that I can talk normally with the Vito Voice Dialer and the headset in my car.

How to detect pressing button on headset?

Does any known how to detect when user press answer button on headset? What event or message generated by system? I find only some event that occurs when user insert headset jack in phone.

The AG service gets a "AT+CKPD=200" message
What i'm interestet in ; How do you send these AT commands ?

I'm sorry, but what is "AG service"?

Audio Gateway.
As far as I remember WM5 has standart API to register AG message handler. WM2003SE and older don't have a standart way.

It's not good. I'm interested in WM2003

Voice Dialing via Bluetooth NOT available on Atom
I thought that when I bought my Atom I would have voice dialing over a Bluetooth Headset. My friend has an Exec and it works fine. However, not with the Atom. Even the latest ROM doesn't support it. I have 4 headsets, all pair in Handsfree profile, all have call answering, call ending and last number re-dial working perfectly, but none will initiate voice dialing with the Atom, but all will voice dial with my Nokia 6230.
Therefore it is not a WM5 built in feature and is still ROM dependant. It doesn't matter whether you use the built in voice program, Vito, Neuvoice or M$ Voicedial, the stack simply won't support the AT command.
C'mon O2, it's about the only thing that is crook with the Atom. Other than that it is just the worlds best pda/phone!

Re: Voice Dialing via Bluetooth NOT available on Atom
Camstech said:
I thought that when I bought my Atom I would have voice dialing over a Bluetooth Headset. My friend has an Exec and it works fine. However, not with the Atom. Even the latest ROM doesn't support it. I have 4 headsets, all pair in Handsfree profile, all have call answering, call ending and last number re-dial working perfectly, but none will initiate voice dialing with the Atom, but all will voice dial with my Nokia 6230.
Therefore it is not a WM5 built in feature and is still ROM dependant. It doesn't matter whether you use the built in voice program, Vito, Neuvoice or M$ Voicedial, the stack simply won't support the AT command.
C'mon O2, it's about the only thing that is crook with the Atom. Other than that it is just the worlds best pda/phone!
Click to expand...
Click to collapse
Couldn't agree more!
About voice dialer. I thought it was just because Atom needs bluetooth headset button to be pressed for a while to launch dialer. It acts so with wired headset. Unfortunately, i have just one bluetooth headset to play with. And it turns off after 2 sec. holding the button.
On my Dopod 818pro everything acts like a charm (VD runs after a single press), so it isn't a WM5 bug.

can someone enable activating MS Voice Command from a wired headset for WM5?
it would be greatly appreciated.
Thanks,

I have the same problem using a bluetooth headset but if I use the wired headset supplied with my Atom it works fine.

that's good news. so, many OEMs are realizing the importance of this feature. so far, they have it in the Treo 700w and according to you, the Atom.
btw, did you have MS Voice Command pre-installed in your Atom, or did you buy it separately?
thanks,

The talk button on the wired headset is a "fake" button. It generates an special pattern in the recorded audio that it's recognized by the phone application.

It generates an special pattern in the recorded audio that it's recognized by the phone application.
Click to expand...
Click to collapse
Are you sure about that?
I've disembled quite a few headsets and the usual way is to shortcircut the mic-wire with one of the stereo-wires, whitch in return has to be cought by the mainboard and then translated to a command.

I'm not sure, but seems pretty feasible. That button is only used by the phone applicacion, which needs to open the wave input device.
Detecting the button pressing is pretty simple: recording at 16 bits, the average of the absolute value of the samples in complete silence is at least 100, with the talk button pressed, 6 or 7.

Bluetooth voice dialing doesn't work on US TMo MDA

I just got this device, and I'm mostly pleased with it after applying various tweaks thanks to the fine people on this board. One problem I'm having though, is I am not able to voice dial contacts using my bluetooth headset. I have a Plantronics M3500 paired up with the device using hands-free profile, however pressing the button on the headset doesn't do anything to the MDA no matter if it is on or in standby mode. I saw messages on here that other people have this working, but so far, I haven't been able to. Is there something special that needs to be done? It worked fine for me on my Sony Ericsson P900 phone. Any suggestions are welcome. TIA.

Nevermind....
Uh... sorry just figured it out. It does work, but differently from my P900. I used to just press the button on the bluetooth headset, but with the Wizard, I have the hold down the button for a couple of seconds. Perhaps something to do with the hands-free vs. headset profile.

Are you using the stock voice dialer or Voice Command? I have been trying to find a way to activate Voice Command via the bluetooth headset button, without any success.

glee719 said:
Are you using the stock voice dialer or Voice Command? I have been trying to find a way to activate Voice Command via the bluetooth headset button, without any success.
Click to expand...
Click to collapse
No, I'm just using the stock voice dialer. The headset is paired up with the MDA using the hands-free profile. When I press the button on the bluetooth headset and hold it for 2 seconds, I hear a litte tone and the MDA 'wakes up'. As I said in the message above, with my Sony Ericsson P900 phone, I used to just have to click the button, and the phone would go into voice dial. I'm guessing that the difference may be due to using the hands-free profile vs. the headset profile that was used with the P900.

glee719 said:
Are you using the stock voice dialer or Voice Command? I have been trying to find a way to activate Voice Command via the bluetooth headset button, without any success.
Click to expand...
Click to collapse
Follow these directions, works great...
Install Voice Command to the default location.
Fire up a registry editor
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\VoiceCMD.exe
Now, when you press your BT headset connect button, MS Voice command will fire up and take commands through the headset. It's reponses will be played through the headset too.

Yeah, what Dustoff said. The other thing to remember (I learned it from these forums) is that you need to press the headset button twice to fully disconnect from the MDA. The first click disconnects from Voice Command, the second click disconnects from the audio gateway.

microsoft voice command and bluetooth headset
I need help getting the microsoft voice command software to work through a bluetooth headset. I used the instruction provided via Bits Inside Registry Editor to change the command on my handheld, but was unsuccessful. My blueangel has the latest rom and ext rom updates via the standardization project, and the headset is a Motorola HS820
Please assist,
thanks
lp

Re: microsoft voice command and bluetooth headset
lebpeach said:
I need help getting the microsoft voice command software to work through a bluetooth headset. I used the instruction provided via Bits Inside Registry Editor to change the command on my handheld, but was unsuccessful. My blueangel has the latest rom and ext rom updates via the standardization project, and the headset is a Motorola HS820
Please assist,
thanks
lp
Click to expand...
Click to collapse
The keyword in your request is BlueAngel. This registry hack is for the wizard only. I am not familiar with how to do it for the BA.
Sorry...

sorry, i saw the info, got excited and didn't notice the type of phone listed.
thanks,
lp

Voice Dialing Application for HD2 - Available?

Correct me if I am wrong, but there is no built in voice dialing capability tools included with the HD2?
I would like to be able to (like I have with the last 2 HTC Smartphones) be able to voice dial a contact over a bluetooth headset or car unit....
Any recommendations, or is this feature hidden somewhere that I simply have to activate? If there is an app I can get, preferrably free, please advise. Thanks!

Microsoft Voice Command is probably the best out there... its almost uncanny how you can just talk to your phone and ask it stuff with no training.... Call blah blah blah.... what are my apointments? .... open file explorer.... etc etc etc....
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset

Thanks, so nothing is included with the HD2 then correct? Is there a free version we can get for our HD2 here or elsewhere of Voice Command?
eskasi said:
Microsoft Voice Command is probably the best out there... its almost uncanny how you can just talk to your phone and ask it stuff with no training.... Call blah blah blah.... what are my apointments? .... open file explorer.... etc etc etc....
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset
Click to expand...
Click to collapse

eskasi said:
Microsoft Voice Command is probably the best out there... its almost uncanny how you can just talk to your phone and ask it stuff with no training.... Call blah blah blah.... what are my apointments? .... open file explorer.... etc etc etc....
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset
Click to expand...
Click to collapse
And that's on an HD2?

MSVC is pretty much the best out there...the other alternative is the Cyberon Speed Dial, but you do have to record for each contact.
eskasi said:
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset
Click to expand...
Click to collapse
Which MSVC version are you using?
I've been having strange problems with my Blueant Supertooth light and MSVC 1.6.
The problems are:
- My Blueant doesn't terminate the connection after calls, the lights and speaker just stays on eventhough the call has been terminated.
- No incoming call announcement from the blueant device.
- Sometimes when I press the call button on my BT device, voice commander responds on the phone's speaker??
Weird... I didn't have the above problems with my TD, although I never could get the incoming call announcement to work as well.

on the same lines, is there any application to type what you speak? This way we could use speech to text instead of using the keyboard!

It is a huge letdown that the HD2 does not already INCLUDE a voice dialing application like the past several HTC phones have had, for years.
HTC needs to step up the plate and both provide this and make sure that bluetooth voice dialing protocols are in place.
Has anyone used the Cyberon app yet? I believe the one is called "Voice Dialer" and the other is called "Voice Commander", not sure what the actual difference is or if either work fully on the HD2.

Hi. I'm using Cyberon Voice Sped Dialer on my HD2 and have set up my voice dals.
However, when I go to use the voice dial I only every get the 'tone' through the phone speaker and no longer through my BT headset. I have a Jawbone 2 BT headset.
My Touch HD worked fine with it and you could dial using voice through the headset but I no longer can on the HD2.
Is there a way to fix this? Do I need different software or is it just one of those things?
Thanks.
Owen.

Hi,
Im having the same problems with my HD2 device. I have a parrot bluetooth carkit and with this new device it doens't work like it should because there is no voice dialing.
I've tried several programs like Microsoft Voice command and other voice command programs like VITO voice command and Cyberon.
Is there any program that just looks like the voice dialing on the HTC Diamond? I just want to record my own voice and use it with my bluetooth carkit.
Thanks,
187ed187

The problems with bluetooth is down to the HD2 using a widcomm bluetooth stack as apposed to a microsoft one. I personally havent found a voice dialing app that will work with the widcomm stack.

So what do we do now? I really love this phone but this is a huge problem for me...

Good question.... experiment!? E-mail voice recognition manufactures?

I have cyberon voice speed dial 1.2
I cant get it to work through my BT but I have sort cut on home that I press and it opens all my progs and dial contacts, one of the best things about my phone now I love that it opens all my programs...
I used to have a n95 and this put an auto voice tag on each contact and worked through any BT, shame the HD2 hasnt got an app that can do that ... and open my progs..

I'm also still waiting for a solution.
I have 2 bt handsfree devices on my 2 cars (Parrot and Blueant)...and MSVC only works for the first try after a soft reset.
After the first go, MSVC just goes thru the phone's mic and speaker. Very annoying when you still need to hold the phone up while driving AND you have a bluetooth handsfree device.

optiknerv said:
The problems with bluetooth is down to the HD2 using a widcomm bluetooth stack as apposed to a microsoft one. I personally havent found a voice dialing app that will work with the widcomm stack.
Click to expand...
Click to collapse
Is it possible for someone to cook a ROM with the MSFT bluetooth stack? Or is that too hardware/driver dependent?

You guys should check out the threat with the name: Voice Dial Removed! WTF?
Since I cannot post links yet I can't post the exact link but I'm sure you guys are able to use the search function on this website
Someone claims to have found a working solution for the problem, it's on the second page of the thread.. I'm going to test it right now
Edit: IT WORKS!! At first holding the call button didn't work for me, so I followed the instructions on the first page and now it works!!

Link :
Voice Dial Removed! WTF?
About to try it, hope it works with BT voice dial, if not then Duttys WM6.5 works as well as it can and includes the long press fix as standard.
Owen.

To install .CAB according to order of their numbering.
Do not forget to put a tick in Audio-adjustments sets (' To reproduce system sounds on removed set ').
I did not check it by myself yet.
I tried to make ONE .CAB but did not find apropriate software.
Let's try this way.

wandel said:
To install .CAB according to order of their numbering.
Do not forget to put a tick in Audio-adjustments sets (' To reproduce system sounds on removed set ').
I did not check it by myself yet.
I tried to make ONE .CAB but did not find apropriate software.
Let's try this way.
Click to expand...
Click to collapse
I have succeeded to activate the CVSD with BT Headset button press with the "4_CVSD_1.2_build_61226_1_BTHeadsetFixed.cab" given in the mail above.
But I can not hear the Voice Tag of the contact from the BT Headset but from the speaker of the HD2 as a confirmation to my speed dial speech.
And I have to check the screen when dialing started if I am motocycling
Any proposal to fix that little problem?

TUNCAYCETIN said:
I have succeeded to activate the CVSD with BT Headset button press with the "4_CVSD_1.2_build_61226_1_BTHeadsetFixed.cab" given in the mail above.
But I can not hear the Voice Tag of the contact from the BT Headset but from the speaker of the HD2 as a confirmation to my speed dial speech.
And I have to check the screen when dialing started if I am motocycling
Any proposal to fix that little problem?
Click to expand...
Click to collapse
Can you give us a little more information? Which ROM ver? Which other soft you installed? Did u use: 1_CyberonVoiceSpeedDial_1_2_b080227_0R3.cab ?
Isn't there an option in the BT setup, sending all systemsounds to BT?

Cyberon V Speed Dial, not can iniciate voice call - Help!

I installed Cyberon Voice Speed Dial on my Omnia, but not CAN initiate voice call by bluetooth. I have to trigger the application on the handset screen for a shortcut and then the call is transferred to the headset. The strange thing is that if the call comes in, that is, upon receipt of the call, I usually attend the headset. However I noticed that when you release 'button on the bluetooth headset a little more length, something like 01 seconds, fires the standard dial pad. So if you drive a bluetooth program on PPC, I think is missing only the direct action triggered by the program for bluetooth voice dialing (Cyberon), that is, assign to the bluetooth function to activate the program Cyberon Speed Voice Dial. However, if the key bluetooth is already pressing the dial pad Samsung's standard, and opens the microphone bluetooth, what is missing in my understanding, it would redirect (change) the action of the button the program you want.Se PC, I would say that would be only a matter of changing the shortcut target .. but if in the PPC do not know how .. someone help me please?

Hi Aureo,
You try to install JETware Hands-Free Extension v1.31, under menu>advance config>tick on voice dial, tqvm

Thanks, I did this, but the "voice dialing" is not enabled on my device. Displays a message (No voice dialing ...). I do not know what to do, was my good old HTC Diamond that worked all right .. but the screen I8000 is wonderful, so I insist.