Good Day!
My Imate Jamin locked up and i can't unlock it because the touch screen is not responding....only the buttons do functioning....i did the soft reset but after the boot it goes locked automatically...sometimes i do hard reset (factory) to be able to resolve but suddenly, the touch screen won't work....
Is it a hardware problem? or a fix/upgrade can solve the issue?
Here's my Imate info:
IPL 1.00
SPL 2.13
GSM 02.07.20
OS 2.13.9.23
Any recommendations are highly appreciated....
Thanks...
Related
Hi...
I upgraded my qtek 9100 from OS version 1.6.7.1 to cingular 1.8.11.1
The problem is that now, the phone doesn't start... the splashscreen appeears, along with... IPL 2.17
SPL 2.21
GSM 02.07.10
OS 1.8.11.1
But doesn't get out from there...
Did a do anything wrong?
PLEASE help me?
Is there any solution or is it bye bye qtek?
maybe you flashed broken or wrong rom.
start your device in bootloader mode (look in wiki how to do this) and then reflash again and if this does not work, get rom from your provider and reflash with this.
...
But my pda starts and it stays in splashscreen... is it repareble anyway?
Yes it should be fixable
Cant understand why you would want a old cingular rom (the cingular is not exactly same hardware as your phone wiza200 vc wiza100!)
You should download an aku2 rom here ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
user name xda password xda
Next get into the bootloader screen - turn device off and start with camera button pressed - should be a multicolor screen
Next attach device to pc via usb cable
Flash with above rom and all should be well
HELP ME!!!
I had, aku2.3 and I tied to update with this ROM,
I did everything like in guide:
1 hard reset
2 Active sync with out align screen
3 Run UPGRADE_ROM.bat and wait until finish sound
4 hard reset again
...and all i have is blue screen:
1 Pl 1.00
SPL 2.13.0000
GSM 02.30.21
OS 3.0.0.0
WM doesn't start. HELP ME I can not work appropriately without my PPC ...I will be grateful for your help
dooogie
I can not get my M600 Prophet to load the OS, it just freezes on the Splash screen (Jester's Edition AKU 2.2).
Anyone got any idea's on how to get this to boot up.
Now loaded with the following:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
I got the same problem few time ago you have to put your m600 in bootloader mode that way :
"Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)"
Then you have to flash your device with a working rom
good luck
If that doesn't work, make sure you don't have your memory card inserted. Take it out and then try the hard reset.
My friend has an Orange M600 (UK G4) variant of the prophet.
I’ve done the recovery flash of the device and just re-flashed it with the orange ROM.
Problem is, I’ll get the splash screen saying orange…. But after a while a line appears across the screen (vertical if that makes any difference) and the screen then fades to either a black screen with an orange line on it or a white screen with a turquoise-ish line on it. The only way to turn the device off is to remove the battery.
Here's the info from the splash screen
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
Any ideas what the problem could be, and where and roughly how much it could cost to repair? Thanks for any help guys and girls
MonkeyBone said:
My friend has an Orange M600 (UK G4) variant of the prophet.
I’ve done the recovery flash of the device and just re-flashed it with the orange ROM.
Problem is, I’ll get the splash screen saying orange…. But after a while a line appears across the screen (vertical if that makes any difference) and the screen then fades to either a black screen with an orange line on it or a white screen with a turquoise-ish line on it. The only way to turn the device off is to remove the battery.
Here's the info from the splash screen
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
Any ideas what the problem could be, and where and roughly how much it could cost to repair? Thanks for any help guys and girls
Click to expand...
Click to collapse
Ever tried flashing with an AKU ROMS? the one that I used to repair my bricked Dopod 818 Pro G3 is with this ROM from l3v5y found in his thread here. Another thing, in my experience, if u want to flash your device in a dead state, you have to enter the SPL mode (Hold COMM button while turning on, you'll get a screen with 3 color.), after you flashed back to the NVID (No Vendor ID) ROM, then you can easily flash any ROM that you prefer given that you have HardSPLed your device once or JumpSPLed if that doesn't work, read this thread here. Hope this helps.
Yeah, unfortunately that's part of the recovery flash
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
It won’t boot with any ROM on it, can get to the splash screen but then it just fades to previous motioned screens....
I ran out of ideas (apart from poss hardware failure)
I wish these were like the universal... easy to fix, flash etc
dear friends,
i have just bought the htc p4350 and noticed that when i boot the the device it does not display anything i.e the ipl, spl , gsm etc
my question how should i flash the device with the cooked roms available here without bricking the device
thanking all in advance
thanks and regards
faizell
Are you looking for this info when you turn the device on (looking at the splash screens) or when you put the device in bootloader (tri-color) mode? As far as I know, the splash screens won't show any info, but if you put the device in bootloader mode (hold down camera button and soft-reset with reset hole) the IPL and SPL should show up. Not sure where else on the phone to get this information other than running the RUU.
And it's definitely a good idea to check those numbers out before HardSPLing.
faizeliza said:
dear friends,
i have just bought the htc p4350 and noticed that when i boot the the device it does not display anything i.e the ipl, spl , gsm etc
my question how should i flash the device with the cooked roms available here without bricking the device
thanking all in advance
thanks and regards
faizell
Click to expand...
Click to collapse
lennyjaxn
thanks so much i have the ipl and spl which shows 4.24
now i will get back to reading how to flash it
i had the imate kjam and whenever you soft reset the phone it would dispaly the ipl,spl etc on the splash screen hence i presumed that this also should apply for the 4350
thanks once again
regards
faizell
No problem! Glad I could give something back after the tons of help I've gotten from this place!
I can understand your confusion, for sure. I had another phone that showed that info on the splash screen as well.