I can not get my M600 Prophet to load the OS, it just freezes on the Splash screen (Jester's Edition AKU 2.2).
Anyone got any idea's on how to get this to boot up.
Now loaded with the following:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
I got the same problem few time ago you have to put your m600 in bootloader mode that way :
"Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)"
Then you have to flash your device with a working rom
good luck
If that doesn't work, make sure you don't have your memory card inserted. Take it out and then try the hard reset.
Related
Hi,
after flashing with aWizard debranded ROM my mda becomes a Error.
Now he stops after Softreset by
ipl 2.06
spl 2.06.0000
gsm 02.19.21
os 1.12.2.23
and than he does nothing.
When I Softreset and press Camara Button he goes in 3 Colour Mode. When I connect to USB he writes left at bottom USB.
But I can´t flash him. He shows Error 302.
What can I do ?
MCS
Maybe try a hard-reset ?
Yes I did, but the Problem is the thame.
MCS
Trying to change rom upgrading from German to italian language, my prophet doesn't restart !
Infact, it seem's locked on splash screen ( O2 image) and windows mobile doesn't start.
IPL is 2.15.0001
SPL is 2.15.0001
GSM 02.19.21
OS 1.0.13.21
I can do hard reset, but when I push camera+Comm+soft reset button and the PPC ask me if I won't to restore default setting, pressing the call button I see the format complete but the windows mobile doesn't start.
At least I notice that i can use bootloader mode (camera+spft reset) but i don't know if there is a way to put os on PPC.
Please help
Thank you
You can try to reflash via the bootloader, as described here: http://forum.xda-developers.com/viewtopic.php?p=285465#285465
I had some feedback from people, who restored the corrupted OS this way.
One fine day it refused to startup. No matter how many resets i do it always hangs up at the startup screen. "windows mobile" written on the top and HTC at the bottom. Tried soft resetting, hard resetting, nothing works. Am able to get into the bootloader mode though(by pressing ok button and power button then hitting reset, no clue what that mode is for.)
I have no clue what to do ? how to get it to work again. Could some one help please??
is this on a 6.1 rom?
if so
Get into bootloader mode (side ok and power buttons and reset)
Test for bad blocks via mtty and fix if need be.
Flash carrier rom (AT&T official rom reccomended)
Reflash 6.1 rom
however if it is just from official rom go to bootloader mode install hardspl and reflash your current rom
Last night I flashed my MDA Compact II with a ROM in this forum. The ROM update seemed to go okay, but now the Charmer won't boot. All I get is the splash screen, which says:
IPL 3.08
SPL 3.08.0000
OS 4.0.0.0
I get no charge indicator light when the phone is plugged in (power or USB). Does anyone know how I can fix this or why this is happening?
Hi
I have the same problem too. I just flash back the original t-mobile flash and it's ok again. But whenever i try to flash it again it hangs on the boot screen again. So if you want it to work just use an original T-mobile flash and it will be ok again
Venom
So but it does not discover ROM at original even fix-up me. But computer sees.
It receives messages at each start-up with errors RUU
It can high wines (blames) CID
Try this, to bring charmer back to life.
This metod don't work.
please i need your help
i flashed wrong Hard Spl in my jamin
and now my jamin didn't turn on without charger
and when i try to make conection with usb it turn off and screen flash for a second and turn off
is there is any solve or any thing can i flash from external memory to solve this problem
check your usb cable, still normal, or is no longer! turn the device off and remove it then reenter betere .... try to soft reset the device like this : Use the stylus to lightly press and hold the RESET button on the bottom of your device. Your device restarts and displays the Today screen.
Warning! Always turn off your device before performing a soft reset. To perform a hard reset
Press and hold the CAMERA and COMM MANAGER buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.
Warning! Always turn off your device before performing a hard reset. Your device will be set back to factory default settings. Please ensure any additional installed applications and/or user data has been backed up before this is performed. if the problem continues go to the bootloader menu and you try to Flash ROM with the original ROMs for your device ....
many thanks for your replay
but i try all this things but the problem still
i think the solve is how to downgrade ipl/spl from 2.21 to original 2.13
is ther is arn way to do this???
why do not you try looking at the WIKI ..? My knowledge on the Wiki is IPL / SPL 2.09, 2.10 to Jamin try and do not despair friend
I traied a lot of officeal room but in go to 80% and stop
i sucses to downgrade Ipl to 2.20
but i can't downgrade Spl - is there is any way to do this ????