Last night I flashed my MDA Compact II with a ROM in this forum. The ROM update seemed to go okay, but now the Charmer won't boot. All I get is the splash screen, which says:
IPL 3.08
SPL 3.08.0000
OS 4.0.0.0
I get no charge indicator light when the phone is plugged in (power or USB). Does anyone know how I can fix this or why this is happening?
Hi
I have the same problem too. I just flash back the original t-mobile flash and it's ok again. But whenever i try to flash it again it hangs on the boot screen again. So if you want it to work just use an original T-mobile flash and it will be ok again
Venom
So but it does not discover ROM at original even fix-up me. But computer sees.
It receives messages at each start-up with errors RUU
It can high wines (blames) CID
Try this, to bring charmer back to life.
This metod don't work.
Related
Last night I flashed my MDA Compact II with a ROM in this forum. It's from the thread: Tuning ROM 2.6.2.27 MDA CHARMER(MDA COMPACT II). The ROM update seemed to go okay, but now the Charmer won't boot. All I get is the splash screen, which says:
IPL 1.12
SPL 1.12.0000
OS 2.6.2.27
After about 20 - 25 seconds, the background does this fade-out effect and then the phone reboots. Also, I get no charge indicator light when the phone is plugged in (power or USB). Does anyone know how I can fix this or why this is happening?
discharge said:
Last night I flashed my MDA Compact II with a ROM in this forum. It's from the thread: Tuning ROM 2.6.2.27 MDA CHARMER(MDA COMPACT II). The ROM update seemed to go okay, but now the Charmer won't boot. All I get is the splash screen, which says:
IPL 1.12
SPL 1.12.0000
OS 2.6.2.27
After about 20 - 25 seconds, the background does this fade-out effect and then the phone reboots. Also, I get no charge indicator light when the phone is plugged in (power or USB). Does anyone know how I can fix this or why this is happening?
Click to expand...
Click to collapse
1. dowenload this t-mobile official rom
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!
discharge said:
Last night I flashed my MDA Compact II with a ROM in this forum. It's from the thread: Tuning ROM 2.6.2.27 MDA CHARMER(MDA COMPACT II). The ROM update seemed to go okay, but now the Charmer won't boot. All I get is the splash screen, which says:
IPL 1.12
SPL 1.12.0000
OS 2.6.2.27
After about 20 - 25 seconds, the background does this fade-out effect and then the phone reboots. Also, I get no charge indicator light when the phone is plugged in (power or USB). Does anyone know how I can fix this or why this is happening?
Click to expand...
Click to collapse
Also the problem is that youve still got v1 bootloaders (IPL + SPL 1.12) Once youve downloaded the official tmobile rom and installed it, you'll have v2 bootloaders and can go back to using that tuning rom properly.
Thanks for the replies. I was able to flash the rom through bootloader mode, and now I'm up and running. Thanks!
Where is the link to Tuning Rom download ? I wanna try it
Last night I flashed my MDA Compact II with a ROM in this forum. It's from the thread: Tuning ROM 2.6.2.27 MDA CHARMER(MDA COMPACT II). The ROM update seemed to go okay, but now the Charmer won't boot. All I get is the splash screen, which says:
IPL 1.12
SPL 1.12.0000
OS 2.6.2.27
the i was told by a senior menber to flash it with BUTTON 1.05 (which i did)
and now BATTERY IS NOT CHARGING
and now i have
ipl 1.01
spl 1.12.000
gsm 01.12.10
os 1.5.4.2
i have checked usb cable , main power charger with other pda and it was working ok
now i can keep my mda compact 2 alive once it is plugged in via main power charger only. i dont have any facility to recharge my battery on another charger.
plz plz help
Dischargee
i hope some one can help
Im having exactly same problem, please help someone, i dont want to lose my mda
shayd said:
1. dowenload this t-mobile official rom
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!
Click to expand...
Click to collapse
thank youuuuuuuuuuuuuuuuuuuu thank you
It dosn't work in my Charmer. My RUU dont see PDA
my mda compat 11 is frozen on the tmoible screen
srox said:
thank youuuuuuuuuuuuuuuuuuuu thank you
Click to expand...
Click to collapse
hi ,
i flased the tmobile rom with ur given link now it doesnt go past the initial screen
all it says is
ipl 3.08
spl 3.08
gsm 02.69.21
os 3.8.2.21
and stays ter all day until battery goes dead.
please help me let me know hw can i get my phone up and running.
shayd said:
1. dowenload this t-mobile official rom
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!
Click to expand...
Click to collapse
Thank you very much for this guide,I have been able to repair a BRICKED MDA Charmer and now,IT WORKS!!Thank you!!
hi all ..
I did flash my HTC wizard with new rom after finishing the install the device reboot and stacked on the boot screen then I tried to go to the boot screen but I couldn't , I tried to make hard rest but also I coudn't nothing is working even charing the device cant be made .
bye bye
Are you able to get to a multi-colored screen with numbers?
In case you don't know, to get to the bootloader screen hold down the camera button and press the power button.
now i got the same problem.
I updated the rom & now i have the multi-colored (red/green/blue/white) screen
with RUU - IPL 2.18 - SPL 2.18 - USB on it (Qtek 9100)
I downloaded the tools from Vippie in the thread "How to flash a new ROM to your Wizard... a little tutorial!" but those won't help...
anybody got any advice? I would like to install WM6...
thanks in advance!
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
which is your device,post full data of your phone,IPL/SPL...? Make...?
As you say you installed through Shelltool,is it a G4 DOC chip version ?
You say it's stuck at the splash screen with ipl/spl and gsm version,which splash screen,is it OS (Rom) initial splash screen or a Bootloaders (Multicolored) screen ?
Secondly ,try to get it into bootloaders (multicolor) screen,if it gets into bootloaders,connect it to PC via usb cable,check small usb appears at the bottom of the bootloader mode in the phone,if it does,than flash a carrier's official Rom to recover back to it's default status.
Good luck
Try the Button's ROM (which is in Wizard Upgrading subforum). Then unlock it again (It may be causd by a fake CID unlock when you try to unlock when IPL/SPL is 2.xx)
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
alldoe said:
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
Click to expand...
Click to collapse
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
luoluomeng said:
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
Click to expand...
Click to collapse
Hello! I have CID unlocked. When I install Button ROM my IPL and SPL is the same (1.01). Every RUU works but It still frozen. 2 Days ago i found on other forum this advice:
INSTRUCTION :
1. miniSD - formated in PC - FAT format (now FAT32 !)
2. Wizard On and Bootloader (press reset and keep photo button let go reset) 3 color display. Put in card to Wizard.
3. Connect USB - PCC to PC
4. Launch MTTY 1.42 (my ver.) with USB connection
5. Write command - r2sd os end press enter
6. Program it will record OS on miniSD
7. After recording make Hard Reset or turn on Bootloader
8. On Display should be written - Format partition ?? (5 sec.) - to confirm press Voice dial button. If inscription it will disappear repeat point 7.
9. If Format partition successful wait OS is write. Done.
10. Draw out miniSD
11. Make Hard Reset
12. Enter in bootloader
13. FOR NON CID WIZARD - Flashing Wizard RUU (must be proper version) - ERROR 300 is bad RUU ERROR 266 turn off Wizard and turn on connect to PC
14. With CID (for example CID G4) seek forum for flashing Wizard with CID G4
My Wizard it lives
Click to expand...
Click to collapse
I was carry out all command step by step, and after flashing proper version Orange ROM my Wizard woken up, but today my Wizard get stuck again and now this way don't work, and I have to find a new method to rescue my PDA.
My Wizard woke up! I find ERA PL ROM (RUU_Prodigy_3829_382130_027111_TMO_PL_PLK_Ship) which flash excellent and working, but now I have a new problem. I can install other ROM after that but none of them work, every stucked at Splashscreen like before.I need to find some WM6 ROM which will working? Someone have some suggestion?
alldoe said:
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
Click to expand...
Click to collapse
i have the same proplem but i have a g4 wizard and it's not cidlocked tell me plz what to do plzzzzzzzzzzzz :'(
I BRICK MY HTC WIZARD... CAN SOME ONE HELP ME PLEASE???? I OWN A HTC WIZARD FROM CINGULAR 8125 POCKET PC. RECENLY I TRYED TO FLASH MY POCKET PC BUT SOMETHONG HAPPEND.... IT JUST STAYS ON THE CINGULAR LOGO..
IPL 2.21.0001
SPL 2.21.O1ip
GSM 02.25.11
OS 2.18.0.0
AND IT JUST STAYS THERE.....
PLEASE HELP......
brick...
chipis said:
I BRICK MY HTC WIZARD... CAN SOME ONE HELP ME PLEASE???? I OWN A HTC WIZARD FROM CINGULAR 8125 POCKET PC. RECENLY I TRYED TO FLASH MY POCKET PC BUT SOMETHONG HAPPEND.... IT JUST STAYS ON THE CINGULAR LOGO..
IPL 2.21.0001
SPL 2.21.O1ip
GSM 02.25.11
OS 2.18.0.0
AND IT JUST STAYS THERE.....
PLEASE HELP......
Click to expand...
Click to collapse
I try to answer... (sorry for my bad english)
1. Make sure your battery up to 50%, 100% is recommended...
2. turn off u'r PPC
3. press camera,talk, and power button at the same time for a second until your display show 3 colour....
4. plug your cable data from PPC to desktopPC, and make sure your display show "USB", and try to re-flash with other ROMS.....
Good Luck
Thank for answer me and understand what i ment
Ok what software you recoment?. I do not know if i have a unlocked phone but i do know that i used it with t-moble even that my pocket pc is for cingular, i went to those stores that unlocked phones and that it
Help.
I have a Wizard G4 and I tried to install a WM6.5 ROM (TechTeamup Mega Wizard rom) from the default WM5. I did not put in the hard-spl (as I now read) before I tried to flash. Now when it boots, I go strait to the flash screen (tri-color) screen. I tried ot run the hard-spl-G4 and it says it cannot find a device. I have tried to re-flash back to WM5 ROMs that I have found, however it says it cannont complete "ERROR 296: UPGRADE ONLY, which makes me belive I need a G4 Wizard ROM that is a full (not upgrade). What steps should I take now to revert back to a WM5 so I can re-try the "unlock" hard-spl proceedure to make the phone WM6 compatible?
Anyone have any suggestions?
IPL 2.28.0001
SPL 2.28.0001
Download the original ship ROM for your phone.
Turn the phone off.
Press and hold the Camera key, now insert the USB cable, Keep holding the camera key until you get the boot loader screen.
Now run the ROM update to flash back to WM5.
ricozy said:
I try to answer... (sorry for my bad english)
1. Make sure your battery up to 50%, 100% is recommended...
2. turn off u'r PPC
3. press camera,talk, and power button at the same time for a second until your display show 3 colour....
4. plug your cable data from PPC to desktopPC, and make sure your display show "USB", and try to re-flash with other ROMS.....
Good Luck
Click to expand...
Click to collapse
I brick my wizard too... What happened was I flashed my own cook of m6r5 it say successful but on reboot, it shows htc logo then stays ay tricolor screen:
IPL 2.26
SPL 2.26
Bootloader wont work..tried many times but I cannot connect to PC...
Tried ricozy post above, can access 3 color... but still cannot connect to PC...
Please help...anyone..
IF u can enter bootloader...connect to pc...u shud c "USB" written in the left bottom corner ...then flash a rom as usual
Hello i tried to flash mine P4350 with at first Hard SPL , works fine after that place a custum rom, seems to works fine, but after a soft reset, NOTHING
even no LED activity. booting with holding camera button for 3 seconds, shows greens screen with ipl 1.08.0001 and 1.08.0001 and then is turns off..
IS this the end for the HTC????
Hello, ik can put a rom on the sd and boot it say illegal certificate?
Flashing from usb with romupdate utility says error 300 invalid update tool (rom update utility = 03.11.3.1)
if u are abel to get to the tricolor screen im sure you could reflash to another ROM (maybe it was a bad ROM/bad download) try flashing a ROM using the sd card (if you dont know how to flash from sd card search on it firs its all over the forum) make sure your battery is higher than 50%. well good luck.
Your SPL is not 4.0 or above. The HardSPL thread warns you against using the HardSPL on a SPL that low because it bricks the phone. You'll have to search for the Herald Goldcard method to revive the phone.
Other than that, this is not the right sub forum to ask those questions in.
Please I need help!!!
My rom flashing stucked on 80% over HTC herald and I had no other choice but to restart the phone and now its completely dead. tri color screen is not coming also.
Please help
I have 2 heralds which are having problems with turning on.
This is what works for me:
1) Take the battery out for 10 seconds
2) plug the charger into the phone
3) put battery back in the phone
4) press POWER button for 3 to 5 seconds
Try it few times - works for me fine, but not always !