My friend has an Orange M600 (UK G4) variant of the prophet.
I’ve done the recovery flash of the device and just re-flashed it with the orange ROM.
Problem is, I’ll get the splash screen saying orange…. But after a while a line appears across the screen (vertical if that makes any difference) and the screen then fades to either a black screen with an orange line on it or a white screen with a turquoise-ish line on it. The only way to turn the device off is to remove the battery.
Here's the info from the splash screen
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
Any ideas what the problem could be, and where and roughly how much it could cost to repair? Thanks for any help guys and girls
MonkeyBone said:
My friend has an Orange M600 (UK G4) variant of the prophet.
I’ve done the recovery flash of the device and just re-flashed it with the orange ROM.
Problem is, I’ll get the splash screen saying orange…. But after a while a line appears across the screen (vertical if that makes any difference) and the screen then fades to either a black screen with an orange line on it or a white screen with a turquoise-ish line on it. The only way to turn the device off is to remove the battery.
Here's the info from the splash screen
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
Any ideas what the problem could be, and where and roughly how much it could cost to repair? Thanks for any help guys and girls
Click to expand...
Click to collapse
Ever tried flashing with an AKU ROMS? the one that I used to repair my bricked Dopod 818 Pro G3 is with this ROM from l3v5y found in his thread here. Another thing, in my experience, if u want to flash your device in a dead state, you have to enter the SPL mode (Hold COMM button while turning on, you'll get a screen with 3 color.), after you flashed back to the NVID (No Vendor ID) ROM, then you can easily flash any ROM that you prefer given that you have HardSPLed your device once or JumpSPLed if that doesn't work, read this thread here. Hope this helps.
Yeah, unfortunately that's part of the recovery flash
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
It won’t boot with any ROM on it, can get to the splash screen but then it just fades to previous motioned screens....
I ran out of ideas (apart from poss hardware failure)
I wish these were like the universal... easy to fix, flash etc
Related
ok i think iv killed my m600
i flashed it with the older imate rom the 1.0.9 version
it installed 100% and rebooted and from ther it was stuck on the imate screen for like 10 minutes and i see the following text in red on the top left corner
---------------------
IPL 2.10.0001
SPL 2.15.0001
GSM 01.14.20
OS 1.0.9.25
-------------------------
i tried removing the battery and restarting the fone. still the same thing. can someone please please please help me with this?
what do i do?
im sure orange wont help me out since i flashed it with a non-orange rom.
never mind fixed itby goin into the bootloader
funky_Saggi said:
never mind fixed itby goin into the bootloader
Click to expand...
Click to collapse
hi there i seem to have the same problem as you with the boot screen. top left corner say's
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 1.0.13.21
can you please tell me how you fixed yours please it would be a great help
What you could do is flash it with an newer rom
Hold camera button AND reset (be asure that it hold it while resetting)
Then... you are in you bootloader... connect the PDA with your PC..it will recognized it!
Then run the romupdate ;-)
Hi thanks for trying to help me i got my phone in to the 3 colour screen but my computer does not pic it up at all. is there another way to save my M600
crossy4life said:
Hi thanks for trying to help me i got my phone in to the 3 colour screen but my computer does not pic it up at all. is there another way to save my M600
Click to expand...
Click to collapse
Aren't you getting "USB" written in the bottom left corner of the 3 colour screen when you connect it to USB?
Yes i get the USB come up at the bottom of the screen my computer does not do anything. can you tell me which ROM i will need as the ones i have to run the ROM update but it comes back saying connect to ActiveSync which i can not do is there a way round this?
Final got my SPV M600 Working with the ROM from the download area thanks for the help anyway
cheers
just change the usb port to another one and start rom it should pick it up
The problem appeared today morning, while listening music using tcmp. the sound stopped suddenly, and standard animated cursor appeared over tcmp screen. i closed tcmp, and the rest of the system seemed fine, i was able to mute the phone and entered my work place. After a while i noticed the screen is off and i can not turn it on using pwr button, although green led kept blinking so the phone was operating. after a soft reset it would not go over splash screen showing IPL, SPL (which are: IPL: 1.06, SPL 1.06, GSM: 01.12.10, OS 1.6.2.4).
I've tried multiple times and still the same, only difference is that sometimes I can see the cursor and sometimes not. I can get to rgb screen and "press send to restore" as well, but that's it. I can't remember whether previously pressing a key illuminated a screen and keys, but now it doesn't. I used to have problems with screen not going black on idle since few days, but that's it. What could have happened? And if the only solution is hard reset, please tell me, could I somehow backup my contacts now? I don't have activesync here so I have to wait till I finish my work to find out..
please help anyone...
rom version : 1.6.2.4 WWE,
date : 11/15/05
radio : 01.12.10
protocol : 4.0.13.23
extrom : 1.6.2.105
That's spooky. My MDA has the same versions of IPL, SPL, GSM and OS, and this morning started misbehaving.
What's this rgb screen you can get to with the "press send to restore" option?
How do I do a hard reset (I have a backup on SD) without being able to get to the Start>Settings>System>Clear storage control panel option?
Rgb screen is a bootloader which i enter by holding cam+voicedial+commmanager butons while softreseting wizard. the other screen i mentioned i enter holding cam and voice buttons, and then pres reset. that screen says 'pres send to restore factory defaults any other key to quit' and it does hard reset if you press green button here...
my problem seems to be over for now, i managed to turn the phone on while i plugged it into a wall charger (believe me, the battery was not a problem - i don't know for how long it's ok now, but at least i made contacts backup now so that i'm ok with a hard reste if i have to...
You both have old roms and could do with upgrading them to aku2 roms. (your device will be more stable) i.e. the first number of the rom will be 2. Please dont ask me to go through how to flash a rom because there are hundreds of posts on the same topic and read the wiki - shortcut top left of the screen. You need to identify whether your device is g3 or g4 but i suspect you both have g3 chips.
Now read & read esp the wizard upgrading forum and wiki and then when you feel confident - flash your device.
mu chipset is g3 based on my ipl/spl info... i wouldn't dare to ask anyone to explain the process of flashing, i'm not that crazy. only thing i'd dare, would be to advice me what rom should i use... or a way to determine this, since i know it can't be just any rom...
banannq said:
mu chipset is g3 based on my ipl/spl info... i wouldn't dare to ask anyone to explain the process of flashing, i'm not that crazy. only thing i'd dare, would be to advice me what rom should i use... or a way to determine this, since i know it can't be just any rom...
Click to expand...
Click to collapse
Looking at your rom numbers i gather you have a t-mobile vario - is it uk or usa rom or polish - i see you live in poland.
there latest uk rom is here ftp://[email protected]/Wi...Prodigy_2210206_109_21911_TMO_UK_WWE_Ship.exe
us rom ftp://[email protected]/Wizard/Roms/Tmobile/RUU_Prodigy_2170702_217_20710_TMO_US.exe
user name xda password xda
Its prob best you sim unlock and cid unlock before you flash in case you change to a non-tmobile rom inc one of the cooked roms.
see here http://forum.xda-developers.com/showthread.php?t=249474
and read dr puttingham's tutorial http://forum.xda-developers.com/showthread.php?t=285435
and now i have given you more than enough hints
p.s. by the way remember to write down your gprs settings and mms settings to use with your new rom.
thats right, its tmobile vario, uk one. it is sim unlocked, i'm not sure about cid but it should not be a problem. thanks for the hints, it really seems more then enough;] i'll probably have to use theese, as soon i have a spare evening...
you don't have to explain me the importance of gprs settings - forcing my wiz to work in uk's o2, then in polish plusgsm, then loosing settings and doing it again finally got me into a habbit of backing every settings up ;]
and last but not least, guys, yesterday i did my first HR ;] ...
Hi
My XDA Neo locks on splash screen (Dopod Enjoy mobility) and windows mobile doesn't start.
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 2.15.13.27
When reset sometimes it even omits the radio ROM GSM 02.19.21 numbers which usually comes between the SPL and OS.
Now every time after restart it displays Rom versions and then the display fades in a very strange way creating random stripes of a different color each time and that is where it gets Stuck, no response nothing. Sometimes it goes to a white screen and sits there. Can not enter to the system Windows Mobile 5 it stops at bootloader screen.
I tried to upgrade with the NoVendor ID ROM,it was upgraded successfully but the problem remains same.
Now I am in < Dopod Suffer mobility> state.
Your help or advice will be greatly appreciated.
Hi, i have the same problem on my G4.
Suddenly screen start becaming white with some vertical colored lines.
No respond.
Tried to HardSPL, SoftSPL, remove battery, flashing different ROMS, disassemble to check if any HW visible problem.
Sometimes this phenomena apper on splash screen (only solution is reset and/or remove battery).
Sometimes load everything, the stuff can be used until the "randomic" effect
What the hell can be?
I read other post with people mentioning the same problem, but up to know no useful solution.
Any help will be appeciated
Thanks
dear friends,
i have just bought the htc p4350 and noticed that when i boot the the device it does not display anything i.e the ipl, spl , gsm etc
my question how should i flash the device with the cooked roms available here without bricking the device
thanking all in advance
thanks and regards
faizell
Are you looking for this info when you turn the device on (looking at the splash screens) or when you put the device in bootloader (tri-color) mode? As far as I know, the splash screens won't show any info, but if you put the device in bootloader mode (hold down camera button and soft-reset with reset hole) the IPL and SPL should show up. Not sure where else on the phone to get this information other than running the RUU.
And it's definitely a good idea to check those numbers out before HardSPLing.
faizeliza said:
dear friends,
i have just bought the htc p4350 and noticed that when i boot the the device it does not display anything i.e the ipl, spl , gsm etc
my question how should i flash the device with the cooked roms available here without bricking the device
thanking all in advance
thanks and regards
faizell
Click to expand...
Click to collapse
lennyjaxn
thanks so much i have the ipl and spl which shows 4.24
now i will get back to reading how to flash it
i had the imate kjam and whenever you soft reset the phone it would dispaly the ipl,spl etc on the splash screen hence i presumed that this also should apply for the 4350
thanks once again
regards
faizell
No problem! Glad I could give something back after the tons of help I've gotten from this place!
I can understand your confusion, for sure. I had another phone that showed that info on the splash screen as well.
Last night I flashed my MDA Compact II with a ROM in this forum. The ROM update seemed to go okay, but now the Charmer won't boot. All I get is the splash screen, which says:
IPL 3.08
SPL 3.08.0000
OS 4.0.0.0
I get no charge indicator light when the phone is plugged in (power or USB). Does anyone know how I can fix this or why this is happening?
Hi
I have the same problem too. I just flash back the original t-mobile flash and it's ok again. But whenever i try to flash it again it hangs on the boot screen again. So if you want it to work just use an original T-mobile flash and it will be ok again
Venom
So but it does not discover ROM at original even fix-up me. But computer sees.
It receives messages at each start-up with errors RUU
It can high wines (blames) CID
Try this, to bring charmer back to life.
This metod don't work.