Related
Had my XDA Exec for a week now and its great until I try and do any thing computer related.....
only managed to get it to sync once and that was just luck, sometimes even when active sync says not connected I can still explore but wont sync but this happened only a couple of times?
the message says:
CRITICAL COMMUNICATIONS SERVIES HAVE FAIL TO START, TRY RESETTING THE MOBILE DEVICE, AND CONNET AGAIN.
which i have done loads of time including hard resets!
I had none of these troubles with my ipaq!
Tried:
uninstalling active sync (NOW 4.1)
turning off firewall
soft resets
hard resets
rom update (luckly done it the one time it did sync)
Calling O2 - dead loss tried to get me to call a premium rate number!!
Tried Microsoft’s sync 4 help page - this is when i got it to work the once, i opened properties in networks and checked and uncheck the box's and just seamed to come to life didn’t change any thing??
Tried it since and nothing happens?? Must have some thing to do with this but no luck so far..............
The second problem is TomTom 5 put on sd card put in xda and and it fires up for one second then nothing? Does the same when I open from PDA?
Ahhhhhhhh! its driving me crazy!!!!
sorry to go on but I desperately need help as don’t want to send it back?
Sorry also am I correct in saying you get a 2 week cooling of period with o2 so could send back with in this time and cancel contract?
@glen
did you try to install the latest 4.1 with the firewall switched-off?
What firewall s/w are you using?
(remember to uninstall all previous versions)
yes already had it running and used with ipaq 2210 and worked spot on!
and as mentioned fire wall is turned off
What firewall(s) are you running? I take it that when you say you switched your firewall off you also mean the WIndows firewall as well? What messages do you get when you plug it in? USB device not recognised or something, or does it not react at all?Have you tried trying to connect through Bluetooth, or by using a different USB port on your PC? If so and it still isn't working, there might be a fault in which case return it!
Fin
Also, sorry if its a silly question, but you have got at least Outlook 2002 on your PC?
pretty sure i have willcheck later? whys that?
It's just that if your device is connected (you can explore it etc) there doesn't appear to be a connection problem, the problem seems to be with synchronization, for which Outlook 2002 (or later) is needed. Maybe I'm barking up the wrong tree, but I had a similar problem when i tried to sync my Exec to my laptop (which only runs Office 2K) I had to install 2K2 from the disc which came with the Exec and all was fine.
At work I get a similar problem.
When I sync with the PC I need to start outlook first before connecting via usb, or else it comes up with an error and only allows me to explore the device.
At home it seems to work ok.
For me at work I think its down to activesync trying to do its thing before outlook has properly loaded.
i dont think this is the problem as i sure i have the xp pro version but will check when i get home...
but saying that the exec connets fine at work?
but thats windows 2k
On mine here are my observations and what I did:
1) I deleted poutlook.ink from the start up folder. This seem to help and at the same time reduces any notification errors after a soft reset which I noticed occurs if I have either sadaemon.ink and poutlook.ink on the start up folder. As of now I only have handymenu.ink in there, a program that I use to launch some system applications.
2) I also noticed that for my computer to recognize my EXEC, I need to plug it in when it is OFF. If I plug it in when it is ON, I get the message device not recognize. If I forgot and plug my EXEC while it is ON, definitely, the message device not recognize appears, so I just disconnect my EXEC from the USB cable. Then turn my device OFF by pressing the power button and plug it back to the USB cable after 10 seconds.
3) Remember not to connect your EXEC immediately via USB cable if you just closed the screen and assume it is already OFF. You have to make sure your EXEC is OFF by turning it OFF using the power button or at least you have exceeded your set time for device activity while on battery power.
4) If however after all these precautions and I still get that message device not recognize, which I seem to experience 1 in 50 tries. I just disconnect my EXEC from the USB cable, make sure I turn it OFF using the power button and plug it back in.
5) I also ONLY experienced this problem to have occured after I upgraded my radio version to 1.06.00. BUT this is a small price to pay for the added benefit of that upgarde.
With these in mind, I always connect without any problems. The message device not connected, I only experience 1 in 50 tries, so I am happy with that.
checked outlook and i have 2002 sp3, going to try the over thing mentioned
tried all those tips and i still get the same message:
CRITICAL COMMUNICATIONS SERVIES HAVE FAIL TO START, TRY RESETTING THE MOBILE DEVICE, AND CONNET AGAIN.
which i have done loads of time including hard resets!
I had none of these troubles with my ipaq!
Is your USB cable plugged directly into your PC? I have had problems syncing before when my device was plugged in through my monitor instead of directly.
Thanks chaps i sorted it at last!!! only took 2 weeks!!!
it was the firewall after all just turning it of was not enough uninstalled it the got norton and set up prop as on microsoft web sight.
job done!
just got to sort tomtom prob now, but brought step by step instrucions of ebay for a fiver!!
looks like a rip of but had bits of the guy before so figures crossed!
if any good ill post up here........
Is there a credible alternative to Activesnc 4.1 anywhere ? I am absolutely sick and tired of this cr*p.
I want to be able to sync calendar, tasks, notes and files - reliably. That's all. That's not too much to ask is it?
Any ideas ?
TIA, DBo.
I'd be interested in one, been looking for a day or two but pretty new to the PPC thing and not making much progress.
Atm the only surefire way to ActiveSync seems to be, soft reset before sync, again after. It's quite a 1 shot deal, once it's synced, it won't again without a soft reset of the PDA. Note: Never needed to restart the PC used, I have tried this, no difference.
Have you read this?
http://forum.xda-developers.com/viewtopic.php?t=41955&highlight=activesync+solution
Solved that problem for me.
reading the other post now ... my activesync kills itself too i need to reboot my pc to make it work again ... apart from that it wont even synch all my contact ... it misses out random ones all the time
Can't tweak my TCP settings
I'd love to do this, but I can't go messing about with the TCP settings on my company laptop. Not if I want to keep my job.
I need a decent alternative to AS 4.1 even if that means AS 4.2
Silentz:
Yeah, tried that (amongst several hundred other things). I already use DrTCP for optimising my lans due to me using gigE with jumbo packets, so am pretty familiar with it on that ground. I also tried many other reg tweaks (on the PC not PPC) regarding networking etc. to no avail.
From all the tests and tweaks I've done I'm no further into solving this issue, which doesn't half stick in my side. PC m$ os with m$ software talking to a PPC with m$ os with m$ software, who the hell is writing this utter drivvle software?
I have concluded however that the PC / ActiveSync 4.1 side of things does not fail or lockup, regardless of reboots or no reboots or net settings used. It is the PPC's running ActiveSync which borks, stalls then grinds to a halt. I suppose it's possible m$ will fix the PC 4.1 software to not bust the PPC but I've also pretty much resided myself to needing a ROM update to fix the PPC half
This of all things annoys me, I've fixed almost everything else wrong with this phone but turning it off on a regular basis just takes the biscuit, like who does that nowadays? :roll:
Yeah that's right - it's the PPC which goes funky, but in my case it was down to the PC (i think) cramming data at it.
If you switch off (untick) all elements of the today screen it also works better, although that's not really a solution!
Microsoft do need to release ActiveSync 4.2 asap.
Yeah, tried all that, I only have MSN on today page anyways but have tried it with nothing. I only sync contacts anyway and even then only about 100 - still hangs if not the first time...
What about this?
Device Manager
Hi,
I was successful in resolving a "stubborn" active Sync, by doing the following:
Remove USB Cable to K-jam.
Open device manager.
Go to Network adapters.
Disabling adapter called: "Windows Mobile Based Device".
Re-enabling adapter called: "Windows Mobile Based Device".
Plugging USB cable back in.
Kind regards
Adrian
I was successful in resolving a "stubborn" active Sync, by doing the following
Click to expand...
Click to collapse
But for how long?
I find that AS is very unstable.
I have installed the latest ROM and still get problems with both my devices.
If I play an MP3 in Windows Media Player, AS drops the connection and I have to unplug my MDA Vario (or my XDA Mini S) and reconnect it again.
If I soft reset for any reason while still connected to AS, it drops the connection and on re-connect it hangs at 'Looking for changes' and I have to re boot the PC to get a connection again.
Other times without warning it will drop the connection and not re-connect without a re-boot of the PC
etc. etc etc.
Fortunately all my contacts, calendar and tasks are held on my PC in Thunderbird (I don't use Outlook) and I have a seperate sync programme for syncing them so I don't need to rely on AS for data sync.
But I do wish there was an alternative for enabling the connection to the PC.
Activesync just keeps trying to connect and is never successful. I have re-installed Activesync on my pc but it didn't help. Also, my work pc doesn't connect either. Definately a problem with my 8125. All has been well for a couple months and I have added no new software before the problem started. This problem also happened about two weeks after I got the phone and the only resolution was a hard reset. What a pain reinstalling all the software and settings I have now, it's customized just the way I like it. Anyone know how to re-install Activesync on JUST the phone or have any other ideas?
Try the latest activesync 4.2 beta and disable any firewalls if possible on the pc. On the device start activesync application and go to menu\options - delete pc that you are syncing with and try again.
Deleted profiles on both pcs installed beta on one. Still no connecting. Tried clicking SYNC on phone, pauses for a second then nada. No connection.
Have you deleted profiles on the device? and disable firewalls, and if you have a network adapter enable it because latest activesync treats the connection with device as a network - there are many posts on this issue do a search and read through some - seem to be many different factors involved.
First- Thanks for the replies Mark
I removed the PC profiles from my 8125. Also reinstalled Activesync 4.2 on my work pc. Nothing. Although this time I got an error message- Cannot find the file "http://go.microsoft.com/fwlink/?linkid=65257&clcid=0x409" (or one of its components) Make sure the path and filename are correct and that all libraries are available". Like I would know what that means. Anyways, no firewall enabled. Besides, this should not be happening, all of a sudden, on 2 separate pcs. That kinda rules out a pc problem. It has to be in the phone. That, and the fact that a hard reset fixed it last time. I'm thinking something corrupted in Activesync on the phone???
And searching on this forum is useless. I type in "connecting Activesync" and every post with either word shows up. 614 in just Wizard forums alone. Is there a way to search so that ONLY posts with both words show up? That way I can modify my wording until I find something useful. Search for any terms or use query as entered is ticked. On other forums you can just use quotation marks but not this one. It makes searching very difficult. ROB
Oh, and yes my network adapters are still enabled as always.
Yes best to search with the word AND cuts out all the other stuff i.e. activesync AND connection would do it. Yep sounds like it may be the device.
found couple of posts that seem to be relevant
http://forum.xda-developers.com/viewtopic.php?t=41955
http://forum.xda-developers.com/viewtopic.php?t=44182
http://forum.xda-developers.com/viewtopic.php?t=49161
http://forum.xda-developers.com/viewtopic.php?t=44574
Happy reading, the last post is about connecting activesync via bluetooth so maybe thats an option.
Thanks Mark. I think I may try the bluetooth connection when I get home tonight. Or I may just throw in the towel and do a hard reset. that worked last time. Plus, I can install the latest ROM upgrade. Shame theres no way to uninstall and reinstall Activesync on the phone. Seems that should do the trick (maybe). Just tried my friends 8125 on my work pc- syncs just fine. So much for all the pc fixes everyone seems to be trying.
I had the same problem with AS refusing to connect via usb or BT.
In the end i went & purchased (although the demo version would have done) Sprite backup. installed on the PC. Browsed to the install dir to find the cab file. copied to my wizard (wifi, or sd card reader etc).
Insatlled & backed up to SD card
Hard reset
restore
stop here if you're happy, if not
AS to sync calender & contacts to pc
hard reset
update ROM
AS contacts, cal, docs etc back to wizard
install SW & settings
BACKUP
Yep. Had to hard reset. All is working again. Crappy Activesync. What's up with this P.O.S. ? Trying to setup bluetooth now and the pc finds the phone but AS won't connect. The phone finds the pc (HomeCenter) but it shows no services available. I'm assuming that there should be some listed (maybe Activesync?) Guess I'll have to do some searching for bluetooth problems with AS now. Did I mention that AS is a P.O.S??? But you all knew that already. :lol:
Dont forget to open a port in you BT settings (on the pc) and tell AS (also on the pc) to accept connections on that port.
Then your wizard should be able to see the AS service on the pc (you initiate the sync from the phone, not the pc)
I have had this problem since day one, and continue to have it despite several (more than 15) hard resets, multiple ROMs, multiple pertnerships etc. I plug in my PPC USB, and it just says "connecting" forever. Every time, after plugging in my USB, I have to shut off my PPC, and turn it back on. Then my laptop finds and connects with my PPC, and syncs all my data like it should. If I do this more than 3 times, my laptop crashes and reboots. If anyone has figured out how to fix this, let me know.
Hi All
I searched the Forum but couldn't find a solution to this problem.
1. Came back form holiday yesterday - synced up my HD" with Outlook no problem
2. Tried to do it this morning. By the normal 'connect PC' option didn't come up and activsync icon didn'tr light up on PC
3. Rebooted HD2 and PC..no change
4. Tried to repair/reinstall activ sync, but towards the end of the repair it says 'there was a network error reading from file 'setup/msi'. Guessing that the file may be corrupt, I downloaded it again..same problem..so I can't repair or reinstall
5. There is definitely a connection of some sort as the HD2 begins to charge when connected
Bottom line is that the HD2 is not syncing - and I can't figure out why not.
Any advice appreciated...
Thanks
Do you have a Norton (Symantec) firewall installed? I’ve found that the Norton product can interfere with ActiveSync.
Active Sync not working
Good point..but no. I have AVG installed (and everything was working OK yesterday)
Spooky thing is, I have managed to uninstal, reinstal and reboot..and it still won't show that it's connected with AS even though there is a connection of some kind, cos the device is charging.
Steve
ActiveSync is just a bit crap. It'll do this occassionaly, so if you use it a lot then get used to it.
A restart of the phone, whilst the USB cable is not plugged in, usually does the trick. Only plug it in again when it's fully started.
Also, try setting the AS connection to not allow USB connections, unplugging and plugging back in, and then setting it to once again allow USB connections.
Just messing with it like that usually works for me. Like I said, it's just a bit crap.
Activ Sync
Yeah, I seem to recall I had this problem a while back - I'll faff around with the settings and see if it makes a difference
Steve
stevep said:
Good point..but no. I have AVG installed (and everything was working OK yesterday)
Spooky thing is, I have managed to uninstal, reinstal and reboot..and it still won't show that it's connected with AS even though there is a connection of some kind, cos the device is charging.
Steve
Click to expand...
Click to collapse
Well if johncmolyneux's suggestions don't work then try disconnecting your phone from the PC, restarting both, disconnecting the PC from the network, disabling the firewall element of AVG (if it has one) and then connecting the phone to the PC again.
If that doesn't work I can only suggest removing ActiveSync, totally shutting down your PC, starting up, then re-installing ActiveSync.
I had a similar problem but I was able to narrow it down to Norton in the end but it's a real pain when you don't know why it won't work.
Good luck with this.
I also occasionally was not able to connect with Active Sync, but rebooting the HD2 always fixes that issue. You said that this did not helped you, so try messing with the settings on Active Sync, like johncmolyneux said, also try when plug the usb cable into the device by default it asks you what kind of connection you're establishing (Active sync, data transfer and internet sharing) - try using data transfer, if it connects, unplug and connect it again, this time use active sync.
Reinstall activsync and Try to disable faster data Synchonization on HD2
Active Sync not working (solved)
That'll teach me to not check the obvious! - It turned out that the cable had developed a fault. I changed the cable and it's now OK.
Case closed.
Steve
My ActiveSync won't Sync
I found with "Enable faster data synchronization check box" ON then doesn't even start ActiveSync on PC. Instead the LAN icon starts searching for an IP.
if OFF then it tries then ActiveSync says ERROR code 85010001
this page
http://www.pocketpcfaq.com/faqs/activesync/exchange_errors.php
says An invalid HTTP communication or protocol syntax occurred.
reboot doesn't help.
Are you sync to Exchange of PC files?
if Exchange, try turn off push update, sync, and turn it back on.
sounds like it's stuck in modem mode or something.. have you tried switching between modes? e.g. put it in modem mode and disk drive and then activesync again..
no Exchange
turned off all except contact/calendar
tried disk drive and then activesync but no good
then tried turning bluetooth off and it worked with with "Enable faster data synchronization check box" off
so still not perfect
The more complex, the more can go wrong. Recently my HD2 has not been running activesync on connection. It is a problem after I have hibernated my PC, but also randomly at other times after a disconnect and reconnect.
Following hte advice above I've tried the change to modem, change to disk and back to activesync, but that did not help. Unchecking the "Enable faster data synchronization check box" has now allowed it to connect.
While activesync was unable to connect, I could still connect using a brilliant little program, sadly not recently updated, called mymobiler. That lets me control the HD2 from my PC< and do screen dumps as well. So how come that would connect but MS Activesync would not? And it was not a new install, I've had that since my first few days of the HD2 and worked well until the last couple of weeks, when this issue has become increasingly annoying.
While activesync was telling me I was disconnected, in the Windows 7 Devices and Printers there was an icon for a "Generic RNDIS" but nothing else about it. When on the HD2 I go back into USB to PC and check the tickbox for "Enable faster data synchronization" that icon reappears. Maybe disabling then enabling this check box has sorted it. Time will tell.
Hmmm...
It is not a new issue with activesync and htc phones. This thread is a year old.
In fact a search of hte web shows htis is common across several makes of phone.
Damn. When I installed HTC's latest hotfix for SMS, it soft reset the HD2.
On restart, the HD2 was not recognised by the PC, but it does show in Devices and Printers as the generic RBIS. So; uncheck the "Enable faster data synchronization" and it appears on the PC as a Generic Serial device, then becomes a live device in the Mobile Device Centre. I guess we won't be using faster then.
What I don;'t understand is why both of the showings in the Devices and Printers are Generic. Surely there is a driver?
argh, now it's broken again, had BT on...
htc has no clue and suggests (again) that I just keep creating a new partnership each time I have this issue (daily)
Are you sync'ing to an external exchaneg server as well as locally?
I had an issue with mine that the external exchange and local seemed to clash some how, I deleted the external and all internal connections from the phone's active sync screen and then the local PCwas able to re sync, then added each of the other conections and made sure that there where no contradictions in the syncing rules?
Maybe not your issue but worth mentioning!
speakerphone said:
argh, nowt's broken again, had BT on...
htc has no clue
Click to expand...
Click to collapse
I regret this is incomprehensible. "nowt" means nothing, so you are saying that nothing is broken again. That would be good, not bad. Your post then stops part way through and concludes negatively against HTC, though for no reason whatsoever. Please could you repost with something that makes sense?
I have no exchange servers, just local PC,
but all errors are exchange related, so HTC say.
if you dont have an exchange server then remove it completely ftom the list of sync locations (i cant remember how you do this, but its the same screen where you select what you want to sync). ive found that if it isnt being recognised that removing the phone from device manager list in windows (deleting drivers/software if asked) and reconnecting the phone seems to work. i have my driver install set to use windows update to locate drivers so try this as well
HD2 won't activesync via bluetooth
My LEO do sync properly via USB. Not connect absolutely via BT.
my setting is :
internal GPS connect via COM4 to TomTom7, VisualGPSce, TutorAssist
and seems to be:
bluetooth port IN is COM1
bluetooth port OUT is COM2
In my Notebook the lonely Local port is COM5. No other one is available
ActiveSync Bluetooth connection is set on COM5
So i know this thread is way old but figured id give it a try. The screen cracked on my TP2 and I cant get WMDC to recognize my device to pull the data. I'm pretty sure that enable faster data synchronization is checked and my screens broken so i can't fix that. Is there another way I can access the phone? Any help is appreciated ty.