Internet Sharing with Ethernet Port - Touch CDMA General

I do not have Broadband internet. I got the Touch because the Internet Sharing option with Sprint PCS if free on my account. I what to share my Sprint EVDO connection with my Xbox360. Heres my setup...
1:HTC Touch in Internet Sharing mode via USB. IPv4:192.168.0.1 no DG
2:When trying to share connection to Ethernet port Windows wants the IPv4 of the Ethernet port to be 192.168.0.1. Windows give this error...
http://support.microsoft.com/kb/241769
Error 783: Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network is either not present, or is disconnected from the network. Please ensure that the LAN adapter is connected before enabling Internet Connection Sharing.
I looked up this Error. It states that Windows wants the Ethernet port to be 19.168.0.1 and something else is using that IP already. The Touch uses that IP and I don't know how to change it or change the IP that Windows wants to use. Please Help!

Related

Hoc Connections

Hi dear developers;
i don't have wirelless modem but i have laptop which has wirelless property i want to share my local internet with my pocket pc. i read some resource but i couldn't achieve it. I do this things... let me know what is wrong?
Create a private network(pcToPc) from wireless networks
i shared it and then i connect it from laptop and i got ip which start with 169... fake ip. so i give manuel ip. i set the default gateway to modem ip. then i can connect to net on laptop but i am not sure the wirelless of the laptop which i shared has internet but i can surf anyway
the pocket pc seems the my laptop's private network i am trying to connect it but it gave me the same fake ip so i give to pocket pc SDIO wirelles adapter manuel ip that's default gateway is same with my laptop (the adsl modem's ip)... so i can get connected but i couldn't use internet. when i am trying to test the intert for example www.google.com after writes locating on status bar then an error "The page cannot be found. Check the name and try again." even thoug i set myISP in network Management -- The Internet.
does anybody understand this connection type? If you share with us we will be very glad. Thank you so much ...

8130 to router WiFi connection

I have a Tornado 8310 with WM6(Andot V6 ROM). I want to connect it to my Wireless Zyxel 661HW router. I need internet connection on my mobile phone to finish a project I work on for the university.
I am to connect to the router and I'm getting the correct IP from the DHCP but I get no Internet.
When I request a Page in IE I get "The Page cannot be found." message.
I was able to connect to the internet through the built in WiFi card of the Asus P5B mobo but I still cannot connect through the router.
Please help gyus..I need it badly.

AT&T 8525 Internet Sharing to Wireless Router?

I am getting ready to head on vacation and I want to use my 8525 as my "Gateway" as there will be 5 of us with laptops and I want to share my 3G connection so here is what I did. I connect my 8525 to my Laptop via usb, I start internet sharing on the 8525 and in my laptop (vista) under network connections I see Local Area Connection 6, remote NDIS based Internet Sharing Device. I right click this connection and select Sharing, and enable internet connection sharing on it. Then what I did was took my router (linksys) and disabled dhcp, but enabled wireless and didnt set any wep or wpa. I connect from my laptop to a port on the router (not the internet port) and then goto another laptop to see if I have internet. I dont, I can see the ssid, I can connect but I do not have internet access. Should I use a crossover cable? What do I have to do so that all of us can have internet thru my phone? Oh, my laptop does have internet (from the usb connection on the phone). I tried to setup the router so that dhcp was enabled, but then I kept getting an ip conflict error, so we cant do that. Also I am not getting an ip on the wireless, it has an ip of like 169.254.177.12.
Any ideas?
Thanks
Jim
There a software which you can install on 8525 and turn it into a wifi internet sharing but I don't know if it capable of handing up to 5 laptops. You might be able to use this software and get a router with some custom firmware which allow bridging then set it up to have router access the internet from 8525 wifi and share it among the 5 laptops but I am not sure if you could bridging and do wifi AP on the same router if not then you'll probably need to have 2 router one to bridge from 8525 wifi and then connect cable to another router that will be an AP for the laptops.
That would be my best guess of doing this unless one of the laptop can do AP via wifi when 8525 is plugged into usb slot.
Bill

[Q] Connecting to internet shared by PC with ethernet cable

Hi everyone,
I have Ideos X5 and I cannot connect to wireless internet shared by my PC. I share my computer's internet from network and sharing center using "Set up a new connection or network". Whatever securiy type I've chosen (none, wep, wpa) I cannot even see the shared connection in the wireless networks list on my phone. I can easly connect to wireless networks shared by access points or wireless modems but as I said I cannot connenct to the wireless connection shared by my PC. My PC uses ethernet cable to connect to internet.
Thanks in advance
Solved
I solved the problem with a third party wireless hotspot software instead of using windows' default wireless internet share method.
Can you explai who you did it?
Just searh for virtual router in google
The windows sharing doesnt create an AP (Acess Point) it creates an ad-hoc network, so in order to connect with you phone you have to use an software that creates an AP... one case of that software is: virtual router

Clockworkmod Tether on Windows 10 Internet Connection Shareing

I'm having issues trying to share my tethered connection with Windows 10 Internet connection sharing. This seems to work just fine on my 2 windows 7 machines. After I had set up ICS on windows 10, The correct IP address shows up with DNS information on my LAN, however It says it has no internet connection when tether is connected. Could this be a result of the using using Win-32 adapter? When I check the other devices on the network, they don't even seem to be getting an IP address. The LAN adapter has the default 192.168.1.1 and is connected to a network hub (not router).
https://forum.xda-developers.com/ge...d-tether-fix-windows-10-t3598634#post76318015
hello check out my thread it will fix it for sure!

Categories

Resources