hi, im not able to connect to the net with my wizard.
i dont have a wireless router so am connecting directly to my laptop, the ad hoc connection i have made works fine for file tranfers, but not for activesync or connecting to the web in either PIE or minimo.
i know activesync isnt possible but surely i should be able to use the broaband from my laptop?
any pointers would be greatly appreciated. software? settings?
its a t-mobile uk vario with qtek test rom.
also anyone know of a remote control utility, i use logmein but would like something a little more menu/macro based for control of media.
cheers
kevo
Try turning on Internet Connection Sharing (ICS) on your laptop; that'll make your laptop act a bit more like a router, providing NAT services to the Wizard.
yeah i've tried that, and i've just tried bridging connections (dont really know much about that) but that hasnt worked either.
kevo
My configuration
Me too, I use ADHOC connection for my WLAN.
PC configuration:
ADSL connection shared
Adress IP:192.168.1.1 Mask:255.255.255.0
PocketPC configuration:
Adress IP:192.168.1.55 Mask:255.255.255.0 Gateway:192.168.1.1
DNS:80.10.246.2 for Wanadoo
Your problem is certainly the DNS.
You can put 192.168.1.1 too.
so it is possible? cool!.......but im still having problems.
i cant figure out how to enter these settings, not to sure where to put them,
iv tried puttin the DNS in the -> connections -> vpn
and -> network cards -> networks adapters -> SDIO WLAN Wireless Adapter
sorry to be a pain, but could you point me to where to get each address and where to put them?
also is there anything particular you did to set up the adhoc network? i just used the Windows XP wizard and then ticket the AdHoc option after.
my laptop is conected to the router and the router is connected to aol adsl.
the ip address of my laptop is showing as a simple 10.0.0. number on the LAN but "Autoconfiguration IP Address. . . : 169.254.235.147" for the WLAN
none of my setup has a static ip address, could this be causing the problems?
thanks
kevo
It's more hazardous without static adress but it's can work.
My PC has directly access to the Internet with a ADSL modem.
It's here (network cards -> networks adapters -> SDIO WLAN Wireless Adapter )
Apparently, it's ok for your PC and the Ad-Hoc mode.
Maybe, you should have your adress IP WLAN on the same network adress of your router.
I GOT IT WORKING!!!
I started again from scratch.
set a new WLAN. added new setup to the vario, added the DNS etc to the vario.
the problem i was having was the way i was sharing the internet connection, i was trying to shared the internet from the wireless to the lan rather than the internet from the lan to the wireless (if that makes sense to anyone!!!). i also ticked all the connection sharing services to allow them, just need to go through them and see which i dont need now.
thanks for the help guys
kevo
(its showing my transfer rate as 11Mbps, although i think iv done the G tweak and my laptop says its got a G card. what speeds should i be getting?)
hi guys, any help you can give is realy apreciated,
ive never used wifi before on my exec or in a home network so treat me as a beginer. ive got a pci wifi network card and i am trying to set it up so i can use my mda pro when i am at home. my computer is currently connected to my housemates wired network which is a simple set up
bb modem......
......|..............
....router........
..../....\..........
my.....his.......
pc......pc.........
like i said nothing fancy, i installed the network card which went fine and bridged my network connections together as advised by my large local computer retailer. my computer asked me to provide a name and network key so i did. my pc is now connected to my mda pro.
and in the wifi it displays
main
status connected to network
ssid: cusnet *thats what i entered as my network name*
tx rate:auto
mode: ad hoc
channel:6
bssid:00-71-0e-71-29-00
mac:00-09-2d-52-4d-66
ip:169.254.156.219
settings
half in power save
turn off not on
leap
nothing entered
...............................
every so often i get the following
*unable to obtain a server assigned ip address, try later or enter an ip address in network settings*
i cant get any internet based app to work and i am asumeing its due to the settings, any help is gonna be soooo apreciated
i dont want to subscribe to wifi in the city if i cant get it working in my own home lol
any one think this might be a network problem ?
ive posted a few questions on network forums but no reply yet
i am lost
:?
From the info that you have given, it looks like your universal is getting an incorrect ip address. What you need to do is check what your desktop ip address and gateway is. Then give your universal and ip in the same range as the desktop ip and also add the gateway to your device. It should wotk this way !
The best option would be to get a wireless access point instead of the wireless network card and set things up like this.
....bb modem......
...........|..............
........router........
..../......|......\.............
my...access......his......
pc......point.......pc......
The wireless access point plugges directly into the router rather than connecting through your PC.
If you don't fancy the above setup then you could use internet connection sharing. You'll need to remove the bridge between your network cards and ensure that the router,your PC and friends PC's isn't using 192.168.0.x IP addresses.
Then you can select ICS (tick the allow other computers to access internet...) on your network card's (one to the router) advanced properties and select your wireless NIC as your home network connection.
I hope this isn't too heavy I've resisted the temptation to start talking about subnets, NAT, DHCP and all the other networking terms.
Hi
Does anyone know how to do this?
I have tried with total commander and many others.
Has anyone got it working?
my purpose for it is streaming music from my pc and accessing documents and saved web pages etc.
P.S. I can connect to the internet over wifi, but not access any PC's on the network.
I am using the latest SE build R2
thanks in advance
its working just fine for me using total commander and gsplayer!
just using the //PC_NAME works perfectly in total commander. In fact, I`m using it right now!
hey i use the htc network plugin works just fine for me, i got a domain network with a win2k8 server and i m able to access all files on it streaming is also possible..
install and soft reset afterwards you got the network entry in settings/connections/NetworkPlugin where you can add computers which you can access afterwards with file explorer
Fabian1112 said:
hey i use the htc network plugin works just fine for me, i got a domain network with a win2k8 server and i m able to access all files on it streaming is also possible..
install and soft reset afterwards you got the network entry in settings/connections/NetworkPlugin where you can add computers which you can access afterwards with file explorer
Click to expand...
Click to collapse
Thank for this app.. works like a bomb!
nice to hear, that it works for you
Hi can you use this appplication to also access the internet via the pc's internet connection e.g. if pc is on a landline and xperia connects via wifi to the pc I want the xperia to be able to use the internet as well ..
do u know?
use a vpn connection to connect to remote network then the plugin should work with this connection and find the computers from the vpn network.. hope you understand what i mean
i am using bulletproof ftp and resco explorer.. resco explorer got possibility to add ftp connections.. so you have just to add port forward to your firewall and to connect to ftp.. if using a single server where all files are stored on it is a very nice alternative to share all things via ftp because you can access it from anywhere.. you need a dyndns hostname or something similar too, but i guess i dont have to say this
i use logmein and the cab works fine for me, i fix customers pc's from the x1 and they pay me for doin it via paypal
still no luck
ok
thank for the help so far
i am feeling really stupid.
i installed the network plugin. then reset and connected to my wifi network at home.
now I try add new or browse and it keeps saying map drive failed or no computer was found in the network.
Could it be my wireless network settings?
I am able to connect to the net
the Ip address is inline with that of my pcs and all the PCs can see each other.
I do not have a domian or VPN setup
Please help.
What am I doing wrong?
I have tried pinging my phone and it works, but if I try ping my Pc from my phone it doesnt work. I am using vxutil
I've been playing around and i noticed that I can ping my phone from my pc but i my phone cannot ping my pc ( doesnt find it). i am using vxutil
any firewall on the host pc? How do you try to connect? Through Hostname or with the ip,.. ? Never had such a problem but you can try to add the drives without browsing by just adding them with the path for example
//mynetworkpc(better you use the ip instead x.x.x.x)/sharedfolder
i think it should be a problem of your host pc i guess.. can you access it from other network computers? Try to ping it from another computer in your network, sounds like a firewall problem to me
Here is what I can do
1. Ping my computer and any other computer from any computer connected to both wired and wireless network
2. access the files on my computer from any other pc in the house
3. stream music to and from my pc to any pc in the house
4. ping my Phone from my pc
5. connect to the internet though the wireless network, using my phone.
What I cant do
1. ping my pc from my phone
2. connect to shared files on my pc from my phone
Let me know if there is something I am doing wrong or any settings to check or anything else I can do to get this working please
I found out some more info that might be useful
it has to do with IP addresses of the phone
Current IP
XPERIA
169.254.2.1
Adapters
NE20001 - NE2000 Compatible ethernet driver
IP Address : 0.0.0.0
TNETW12511 - IEEE 802.11b/g Compatible Wifi adapter
IP Address : 192.168.11.4
Subnet Mask : 255.0.0.0
Default Gateway :192.168.11.2
Primary DNS : 192.168.11.2
DNCP Server : 192.168.11.2
Now my pc's IP address is 192.168.11.9
My routers IP address is 192.168.11.2
Should I be changing the Current IP address?
I found out some more info that might be useful
it has to do with IP addresses of the phone
Current IP
XPERIA
169.254.2.1
Adapters
NE20001 - NE2000 Compatible ethernet driver
IP Address : 0.0.0.0
TNETW12511 - IEEE 802.11b/g Compatible Wifi adapter
IP Address : 192.168.11.4
Subnet Mask : 255.0.0.0
Default Gateway :192.168.11.2
Primary DNS : 192.168.11.2
DNCP Server : 192.168.11.2
Now my pc's IP address is 192.168.11.9
My routers IP address is 192.168.11.2
Should I be changing the Current IP address?
I use Resco File Explorer2008. It sees my Vista x64 pc on my wireless net without a problem. I can map and explore any shared drives on it.
I also use a app called Iper. It sees all my net devices and pings them without a problem either??
Stuart
festeradamz said:
i use logmein and the cab works fine for me, i fix customers pc's from the x1 and they pay me for doin it via paypal
Click to expand...
Click to collapse
You have logmein working from the X1? if so, how did you get this to work. This would be really useful for me
Ok I have installed IPer
I have noticed again the IP address for RNDISFN1 is 169.244.x.x and the Ip address for my network is 192.168.xx.x. could this be the problem and if so how do I change this IP address ( the phone)
I really want to get this working and all help will be greatly appreciated!!!!!!!!!
please help : i ve turned my laptop into hotspot via adhoc
the problem is icant browsing over my hermes although it can see my lap top
please help
First you need to confirm that your laptop has an internet connection available.
Second you need to share the connection , in the connection sharing dialog, you can select your wifi connection as the target of the sharing. After the sharing, your wifi network card will have ip address of 192.168.0.1 , and when your hermes try to connect, hermes will get a ip like 192.168.1.2 , so that it can connect to your laptop and get online.
Hi ppl!
I have problem with connecting to the internet with my i900. I'm pretty new to WM so I'm pretty confused about lacking of standard options that I'm used on XP...
But let me explain whats the problem:
I have adsl router and need to dial pppoe connection to get out to the net. My ISP has locked routers default capabilities, which had setting up pppoe connection in the router so every thing that connets to the router could have easy exit to the internet (yeah, stupid ISP...).
So I've searched for the pppoe on the WM and found on this forum (i cant post the link?) app that can make pppoe connection on wm. Problem is that it doesn't work on my phone and feedback on it is pretty low.
So I've came up with another solution which needs a gateway function on my WM: I can dial a pppoe connection on my PC, share it, and then use my PC as a gateway to the internet by setting my PC's IP as a gateway on my WM phone. My PC is connected to the router by wire and hasn't got wireless adapter on it. Only thing wireless is a router... and a phone
I have found gateway option: (settings->wifi->network adapters->SyChip Jaguar->Use specific IP adress
BUT it doesn't work. I cant connect to the internet!
because I'm new to all this, is there something I'm missing?
I can ping my phones IP from my PC and my PC's IP with vxUtil and I've disabled firewall on my PC. In opera I've tryed all of connection tipes but I get "network problem". Also, I've configured my wireless conenctios as "my work network" and checked box under "This network connects to the internet"
Help?
PS
cracking a IPS's router isn't the option