Related
My phone is dead now unfortunately
i tried the Olipro unlocker on this athena (i have unlocked 2-3 before) but this time phone gone black screen. no boot-loader, no hardreset only red light on the joystick.
i was doing STEP 1 and program was asking the location to save the file. and suddenly gave me error message and i ignored it. i was waiting 1hour befor disconnect but nothing happened so i had to reset. after that nothing happened.
now the phone does not go into bootloader (when you press CAM+RESET)
does not turn on
does not hard reset
only red light on joystick
Please help
Thank you
xdaking said:
My phone is dead now unfortunately
i tried the Olipro unlocker on this athena (i have unlocked 2-3 before) but this time phone gone black screen. no boot-loader, no hardreset only red light on the joystick.
i was doing STEP 1 and program was asking the location to save the file. and suddenly gave me error message and i ignored it. i was waiting 1hour befor disconnect but nothing happened so i had to reset. after that nothing happened.
now the phone does not go into bootloader (when you press CAM+RESET)
does not turn on
does not hard reset
only red light on joystick
Please help
Thank you
Click to expand...
Click to collapse
Remove Battery and wait 30 minutes. Remove any memory card. Replace battery and try to enter bootloader or hard reset. May not work, but you are nowhere otherwise.
Thank you raskell for your super reply. i have done the battery reset but still no good results. basicaly lcd does not turns on (no boot loader, no lights on lcd)
very unfortunate storey
i have unlocked HERMS and all the other HTCs without any problems. (hundreds of them)
but i dont know wot went wrong with this
I have the same problem.. Is there any solutions??
Which version of unlocker have you used? Last one? Dated 20-11-2007 in zip file?
I have used the last one
same here.
black screen, wont power on at all. no signs of life. looks grim.
this happened to me, i took usb cable out, took battery out put it back in, kept power button down till green light came on, kept the voice dial and camer button down and stuck the stylus in the reset hole this took it into the olipro boot loader, i then ran the athena project rom and it updated it, all working
I think there seems to be some confusion as to the OLI unlocker program. There are apparently two versions of the CID unlocker. One works with x7500 the other one works with both the x7500 and the x7501. Can someone please confirm this?
Thank you.
Same problem here also, i just tried to put it on unlock mode (2nd step) and after that blank screen, i can't access nothing anymore.
lmdiablo said:
Same problem here also, i just tried to put it on unlock mode (2nd step) and after that blank screen, i can't access nothing anymore.
Click to expand...
Click to collapse
Wow! you revive a 5 month old thread rather than looking in the unlocking thread.
As you can't access nothing I assume you can access everything.
xdaking said:
My phone is dead now unfortunately
i tried the Olipro unlocker on this athena (i have unlocked 2-3 before) but this time phone gone black screen. no boot-loader, no hardreset only red light on the joystick.
i was doing STEP 1 and program was asking the location to save the file. and suddenly gave me error message and i ignored it. i was waiting 1hour befor disconnect but nothing happened so i had to reset. after that nothing happened.
now the phone does not go into bootloader (when you press CAM+RESET)
does not turn on
does not hard reset
only red light on joystick
Please help
Thank you
Click to expand...
Click to collapse
I have the same problem.. Is there any solutions??!!!!! Help!!!!!!
Take the battery out. Leave for half an hour. Try again.
Confucious said:
Wow! you revive a 5 month old thread rather than looking in the unlocking thread.
As you can't access nothing I assume you can access everything.
Click to expand...
Click to collapse
No, no, you've got it all wrong. What he's trying to say is:
"I can't access nothing."
1. Nothing is inaccessible.
Now let'S break this down.
Nothing (subject, which oddly enough is a thing) is (verb present tense) inaccessible (direct object, what the subject "is" ,in this case anyway).
Upon evaluating this, we find that just because we have no access to this "nothing", we do not necessarily have access to everything other than nothing.
Not that that means anything; the idea that our lack of access to nothing equals access to everything, of course....uhhh....I think. But who cares, because 24 hours from now, today will be tommorrow, on Thursdays anyway.
You are, of course, right.
I can access nothing so maybe he has got a fault with his phone.
Confucious said:
You are, of course, right.
I can access nothing so maybe he has got a fault with his phone.
Click to expand...
Click to collapse
Indeed, maybe he should send it to htc with a post-it note:
"This thing's a piece of crap. I can't access nothing."
Shouldn't that be
"This thing's a piece of crap. I can't access nothing."?
Confucious said:
Shouldn't that be
"This thing's a piece of crap. I can't access nothing."?
Click to expand...
Click to collapse
Ok damnit you win.
But of course I intentionally left out that apostrophe because I was impersonating the one (whoever that was) who started this whole "C.A.N." discussion, if only it had been a C.A.S. discussion, we wouldn't be having this discussion.
Hope you have fun deciphering that monstrosity of a run-on sentence.
Thanks for reading.
I'm currently using WM6.1 on the phone, and loving everything about it.
Since day 1, I've used a phone lock code, along with PIN1 code.
When unlocking the phone for after say an hours inactivity, the keypad will show, then the screen will go blank only showing the top bar of the phone.
Any press of buttons and screen will just make a beeping sound, and so far nothing I've done will restore the keypad to unlock the phone.
Is there anything wrong with the ROM i have, and is there anyone who can suggest how to correct this?
Please remember, the top bar still shows, and a reset allows the phone to work as normal (once logging back into it of course).
Thank you,
Hi guys,
Sorry to bring this back up, but this problem is still going on.
Not sure how to resolve it, so hoping someone would know how to solve this.
Thanks,
Posted twice for some reason.
Maybe is a sw failure,(50%) try to reflash with this fw: RUU_Hermes_CINGULAR_WWE_3625023_6275_1540700_108_UOOS_SVN05_Ship.exe
if your hermes its from att/cingular. after flash open and close the tap of hermes, if the blank screen continues or return this, the failure is hw (the flex component broken,bus, pcb) in this case you need to buy the spare part or send to sat.
good luck
other possible solution
http://forum.xda-developers.com/showthread.php?t=321163
Hi there,
Its not white screening, or anything else, I think the next time it does this, I'm going to have to take a picture, to make sure it can be understood clearly.
Basically, when bringing the phone out of standby (from pressing off/on button) and attempting to enter my pin into the phone the phone will allow me usually to press at least one number of my pin, and then it'll black screen, where the start bar still displays, but no response.
The handset isn't problematic when being opened for use, or anything else, its just annoying to have to reset to load the phone back up again.
I hope this helps?
Further to the above, here is what i've been talking about...
Happened last night, typically as I was bored, and had to wait till morning to take the photo...
Still no movement on this post...
Would it be suggestable to upgrade the install of WM?
If it is, how easy (will read guides beforehand) is it to do (reasonably, hard etc).
Just this is now my only phone, so don't fancy my chances bricking it.
Thanks!
Sorry to be posting yet again, but this has now happened 3 times a in row since last night. I wouldn't mind knowing if a rom fix would sort this, and if so whats the best rom to go for...
Just keen to get this sorted now...
Thanks.
If it helps, I've nothing running when this happens. The exception of last night, where I was using Audio Manager when walking home, and had to soft reset once in the door.
Hi
I am almost certain you have a software fault here and need to reload a new ROM - take your pick - my preference is schnaps - it isnt that hard to do and should solve your problem
Just go to the Windows upgrading section on here and follow the process - you will be happy
John
Before I start I know how touchy people are about searching forums and the wiki etc... but I already have!
Ok so, I tried to flash a new ROM to my phone last night, I have done it before without problems however this time I was having trouble getting the phone to connect to my laptop (I run Windows 7). Both USPL and HSPL wouldn't work (in fact active sync wouldn't even recognise it).
So I went to bed, woke up and... My phone didn't work at all
I spent ages trying to get it too work, I tried putting it into bootloader, but nothing happened, I tried getting it to Hard reset, but nothing happened. (By nothing happens i mean the screen doesn't turn on).
The only sign of life i get from it is the little vibration that usually occurs after the 'smart mobility' screen appears. Except this is delayed by about 10 seconds from after pressing the Power button.
The delay makes me think that there is something else wrong with the phone other then the screen...
Please help!!
Oh and I am sorry for the essay... I only just realised how long and rambling it is haaa.
UPDATE: right it just connected to activesync but still nothing on the screen, is there any way of checking for definite that the screen is broke before I fork out for a new one? There is astill the massive delay between turning the phone on and getting the little vibration...
Try removing battery overnight, then re-inserting. Then try to get to bootloader or hard reset
how exactly did you manage to brick it? did you flash the rom in question with uspl, or do u generally have hard spl installed? i dont know but it looks like the bootloader is somehow broken ...
Ok I will try doing that, thank you for helping
And no, I didnt get as far as flashing the ROM because active sync never recognised the phone in Bootlaoder. I usually use USPL.
Did you fix it? and if so how?
I have very similar issues with my HD right now. Screen went black, bought a new LCD and still the same problem. Oddly enough the only way I can get the screen to come on is to take the battery out and set both battery and phone body in my window sill for half an hour or so. It is cold here right now and they are both pretty cool to the touch when I take them out. Put it back together and tada! Screen comes on. I dunno what the deal is also, don't know if its the battery or phone being cold that makes it work again??? I am going to try and figure it out.. Try it on yours it may help
I have just got the HD2 and been using it for a few weeks. Downloaded a few apps (eg HTC rom, BSB tweeks) and all is good. Saw Max Manila and looked like a great idea - checked my manila version 2.5.19211619.0 and downloaded 2.7 SE (checked it's right for my manila) loaded onto phone and it crashed after soft reset. Took battery out and phone doesn't go past first screen (with the red writing bottom left) - Hard reset is the same and now I'm worried!
Any ideas???
sad to say yy sounds like hard reset time.
power off, hold volume up and volume down, tap power keeping volume up and down pressed til the screen comes on and follow the prompts.
it will reset your phone to factory defaults.
never used max manila so I cant help with what the problem might be, but if there is a developers thread for it you might be better asking there.
Thanks for replying samsamuel - I've tried the hard reset and it doesn't work!
Even when I do as you say, I get the white start screen with htc written on it and then several red lines at the bottom right starting R G and D and that's it! It just stay's like that - At this moment I'd pray for a hard reset!!
I'm going to try booting from the sd card but I'm not sure I can get the phone to go into the bootable mode. I've downloaded the HTC rom and extracted the nmh so we'll see.
if your phone is provider locked then that will not work.you need the rom that came on your phone. so if was from uk o2 then you need the o2 uk rom, otherwise it wont work.
No luck! Whilst I've got everything to sort the phone out it won't do anything but load the white first screen no matter which buttons I hold down.
Man this sucks!
Guess there's nothing for it except the bin unless anyone else has any other ideas??
can you get into boot loader?
press and hold vol down(not up this time, just down) tap and release power, keep vol down held. should boot to striped cultures colored screen.
if you can what does it say next to SPL?
Hi Samsamual
Thanks for helping but no, won't go into bootloader either - doesn't respond to any input (even when I conect the usb the charge led doesn't come on!) and just starts with the white screen with the HTC logo and then the red writting appears and it just hangs - left it for 5 mins just to be sure and no change
Looks like I've really messed it up although I have no idea what I did wrong - instal went just like the other things I installed.
Ahh shame. All i can suggest is the original rom sd card method. But it MUST be the propper rom that came on your phone, so if you got it from vodaphone, , , even if it is unlocked, you must use the voda rom.
Also, have a really good read through the pages in teh rom development section. If you can find someone with the exact same issue, you could be one step closer to fixing it.
Brotherskid said:
Thanks for replying samsamuel - I've tried the hard reset and it doesn't work!
Even when I do as you say, I get the white start screen with htc written on it and then several red lines at the bottom right starting R G and D and that's it! It just stay's like that - At this moment I'd pray for a hard reset!!
I'm going to try booting from the sd card but I'm not sure I can get the phone to go into the bootable mode. I've downloaded the HTC rom and extracted the nmh so we'll see.
Click to expand...
Click to collapse
you must tab the power botton for a short time just tab it and leave it with keeping pressing on the volume up and down buttons don't leave them i think it must work with you tell me if it works
Brotherskid said:
...I'm going to try booting from the sd card b
Click to expand...
Click to collapse
When you tried the SD card method did you use a 2GB SD card and was it formatted to FAT32?
WB
Have you tried a boot (all combinations!) without the sd card installed?
Hoss and WB - thanks for the comments
Hoss, I've held the volume buttons for over a minute after powering on - no change
WB, I can't get the phone to go into boot loader screen but thanks for the info for the future. Next time I'll see if I can copy the original rom just in case.
Resigned myself to having a new paper weight on my desk and looking for a new phone - Guess I won't be putting so many programs on my new one....
PA - Thanks for the advice - Yes tried with sd card in/out sim in/out bootloader, hard reset, soft reset and always the same.
In your posts you do not mention where you bought your HD2, and I do not know what country you are in.
From what I have read, it seems that you did not flash any ROMs, nor change your SPL, so if I were you, at this point, rather than accepting a bricked paperweight, why not explore your warranty possibilities?
Contact the place you bought the HD2 (the dealer) and explore your options. Since I do not know which country you are in I will not suggest an HTC service center, but if your country has such a center, at last resort, you might check out that possibility.
Since you apparently had no hardware problems before the manila incident, it would seem that it is a software glitch somehwere.
Good luck with all of this. It must be almost heartbreaking to have this happen with such beautiful hardware.
rlydiard said:
In your posts you do not mention where you bought your HD2, and I do not know what country you are in.
From what I have read, it seems that you did not flash any ROMs, nor change your SPL, so if I were you, at this point, rather than accepting a bricked paperweight, why not explore your warranty possibilities?
Contact the place you bought the HD2 (the dealer) and explore your options. Since I do not know which country you are in I will not suggest an HTC service center, but if your country has such a center, at last resort, you might check out that possibility.
Since you apparently had no hardware problems before the manila incident, it would seem that it is a software glitch somehwere.
Good luck with all of this. It must be almost heartbreaking to have this happen with such beautiful hardware.
Click to expand...
Click to collapse
What's most annoying is it wasn't as if I was doing anything crazy! Max manila is used by many people (from what I've seen in the threads) and I guess I downloaded the wrong one (although naturally I checked and it's the right one). Certainly will curb my using of 3rd party software! As for the warranty, you're right, I can try and see if it can be fixed (bizarrely, that hadn't occured to me - I thought that with no resets working HTC couldn't do anything). Thanks for the tip and I'll let you know how I get on.
Surely your warranty will cover this. Yes, let me (and us) know how all of this goes. You will get your phone back to what you deserve, for sure!
I had the same issue.
Sent mine to HTC and got it back with the comment "Cannot reproduce"
Probably it solved itself when the battery was removed for a couple of days in the mail.
It has now been working for two weeks again.
Fingers crossed.
watnuweer said:
I had the same issue.
Sent mine to HTC and got it back with the comment "Cannot reproduce"
Probably it solved itself when the battery was removed for a couple of days in the mail.
It has now been working for two weeks again.
Fingers crossed.
Click to expand...
Click to collapse
Experential nut I may be, but just wondering if you had the problem after you installed the MAx manila? I wonder now what versions of OS may be causing this problem.
i had something like this with my HTC Diamond... It stopped responding completely when turned on, didn't respond to the usb cable being plugged in (the round ring used to illuminate when charging)
I took the battery out, for about 30 minutes... then left it charging for another 30 minutes - booted up straight away and never did anything like that again
Worth a shot just leaving it without power for awhile, and then just recharging it
Like watnuweer mentioned, "cannot reproduce" probably fixed itself by not having the battery left in for awhile
fakker said:
i had something like this with my HTC Diamond... It stopped responding completely when turned on, didn't respond to the usb cable being plugged in (the round ring used to illuminate when charging)
I took the battery out, for about 30 minutes... then left it charging for another 30 minutes - booted up straight away and never did anything like that again
Worth a shot just leaving it without power for awhile, and then just recharging it
Like watnuweer mentioned, "cannot reproduce" probably fixed itself by not having the battery left in for awhile
Click to expand...
Click to collapse
This is getting more interesting, what do you suppose is the cure of taking out the battery, and then charging? I do not doubt your experience, I am just extremely curious if anyone can explain this phenomena.
Just as i said - Argh! The screen is no longer responsive. What to do? I can no longer slide the lock across the screen. i have tried to flash the ROM with the 1.66 official but i cannot because it tells me to unlock the phone. I cant! argh! I've pushed the little red button by the battery a couple of times as well as removed the battery. Any suggestions? The hard buttons allow me to answer a call but that's it. i recently turned on the lock for the phone (today in fact) but I've unlocked it several times since doing so before this happened.
Sounds familiar...
Sounds like it is the same problem I had, as well as a few others on this forum. Even after a hard reset, it still didn't work. According to other people here, the solution is to have the screen swopped out for a new one. I've actually just sent mine in today to get it sorted out.
Just curious - I've got a suspicion that environmental conditions may have a role to play in causing the failure. What is the weather in your area like?
Very nice here today. Sunny, mid 50s(f).
I bought this off of ebay. Do i just send it in to HTC?
Try a hard reset, and if it doesn't help then make sure you have an official ROM and send it to HTC.
a hard reset is the little red button next to the battery, correct? ive done that.
and i cant very well change the ROMs at this point now, can i?
lythe123 said:
a hard reset is the little red button next to the battery, correct? ive done that.
and i cant very well change the ROMs at this point now, can i?
Click to expand...
Click to collapse
I would really like to wipe it before i sent it in. i dont want all my info, etc going into someones hands i dont know. anyway to do that?
No, that's a soft reset. Hard reset is pressing the red button while holding both volume keys until you get the "Restore factory settings?" prompt (when the device is on), then following the onsceeen instructions. This is what you're looking for to erase everything, including any possible software bug that could have caused the issue.
If the touchscreen still doesn't work then, send it in.
lythe123 said:
a hard reset is the little red button next to the battery, correct? ive done that.
and i cant very well change the ROMs at this point now, can i?
Click to expand...
Click to collapse
No! A hard reset is:
- Turn phone off
- Press vol up and down at the same time and then press power button (hold vol)
- follow the instructions on the screen
Be aware, that all you data on the phone will get lost. I recommend taking out the SD for that as well. After that u r done. By what you say i assume, that you didnt flash a custom ROM yet, right ?
Thanks! that didnt work either though.
I just want my money back now honestly. This thing, as pretty as it is, is just too much trouble.
Sorry double post...
A faulty device can happen to anybody, just bad luck... can't count how many times it has happened to me as well in the past.
I heard that there is a batch of phones that have a faulty screen, other problems are that without pressing anything the phone still registers clicks, phone doesn't always detect the correct place of where you pressed and the screen not responding.
I have got this on my phone and have arranged a pick up from HTC to pick up my phone for repair, hopefully in a week or two it will come back with a brand new screen that works
Ive had it a couple of months now. Im not sure if i can deal with the lack of apps that my iPhone has, pandora and the like, and the fact that teh HD2 would every so often change time and even date and i cant get weather in places my iPhone can.
In short, i love the HD2 for its specs but i no longer trust it at all.