When i first turn on the phone, and hit the start menu in top left, it's fine, second time I hit it, a bunch of programs show like calculator 6 times settings a bunch, like a history of what I've gone to. Third time, everything is white and if I scroll down using joystick it turns into color, but still very annoying.
Anyone know what's causing the problem?
Thanks
edit: not just when i turn on the phone, it happens always then, but not always during regular running
when did u get your titan are you turning the phone off with the power button or soft resetting. if your not using the soft reset button try that
I got it back in november, it's been good up until about a week ago... and yes I've been soft resetting
I had the same exact problem. I was running ROM 3.16. For the life of me I couldn't figure out why it was happening. I installed the Large Start Menu program a few days earlier. I didn't like it so I uninstalled it. A few days later I started getting the Start Menu problem. I'm not sure if the Large Start Menu program was the problem since the uninstall was done a few days prior. In any event I ended up installing dcd's 2.3.1 ROM a few days ago and the problem hasn't returned.
****, ok i tried to get a new rom, and now im stuck at this screen that is red green blue and white stripes, and says
"TITA100 MFG
SPL-2.4.0 Olipro
CPLD-9"
please help I have no idea what I'm doing, and I really dont want to hard reset! Thanks
See my reply in your other thread.
Regarding the white Start menu, I don't know if this is the cause, but PPC2003 used to have a bug where if you had more than 10 items on your Start menu, it would turn white. Maybe that's your problem.
Related
Just got a s/h exec and I think it is faulty. Whats happens is it starts up ok and works for a while and then for no reason that I can think of it goes into a loop which stops it from working.
When I say a loop I'm not sure thats the right terminology but imagine if you tapped the start button and the start menu opens... and then imagine you tapped the tab button , the next item would highlight. If you tapped the tab button again the next item would highlight and so on. Well its as if the tab button is being hit over and over because all the items in the start menu will be highlighted one after the other over and over again.... it just goes round and round in a loop.
Its possible to escape from this and go to another screen but the same looping will go on in that screen too.
If you switch off and leave for a while and come back to it it works ok for a short time and thens starts the carry on again.
Sometimes if you just wait a while it stops, but will start doing it again even if you dont touch anything.
I've noticed one way to force it to stop is to slide the volume button... this seems to stop the loop and allows normal function for a while.... then the crazy looping starts again.
Has anyone seen this or know anything about it.
Nope sorry, maybe you can have it replaced where you bought it as from your post, you can recreate the problem easily.
Side Note : Have you tried Hard Resetting? Or installing another ROM?
I have tried hard resets and factory reset... problem remains.
Will try new ROM.... just trying to figure out how to do it !
weegee said:
I have tried hard resets and factory reset... problem remains.
Will try new ROM.... just trying to figure out how to do it !
Click to expand...
Click to collapse
Just download a new ROM form imate or something, unpack all the files in the ROM update to a directory, put the attached file in same directory.
Enter bootloader mode (Backlight + Power + Reset Hole) you will see SERAIL on the screen but not backlight so look hard.
Plug into PC, the SERIAL will change to USB
Run the attached file. You will see a photo of an S100 but continue anyway....
Hard reset when finished... DOne
ok have installed latest rom... but exec still doing loop loop
Just for arguments sake, can you try installing Imate's newest ROM?
yea thats the one i have just put on.
It seems to be doing the problem less than before. I notice that it does stop if i press the backlight key or move the sound slider.
I'm wondering if there is dust or dirt got in behind the buttons or something like that... although I would have thought other people would have come across this b4 if that was the problem. The machine is one of the first to come out, although I just got it a couple of days ago.
weegee said:
yea thats the one i have just put on.
It seems to be doing the problem less than before. I notice that it does stop if i press the backlight key or move the sound slider.
I'm wondering if there is dust or dirt got in behind the buttons or something like that... although I would have thought other people would have come across this b4 if that was the problem. The machine is one of the first to come out, although I just got it a couple of days ago.
Click to expand...
Click to collapse
If you have tried different ROM flavors and still get the same problem, then it is definitely hardware related. Send your unit in and demand for a new one not a repair
Just been playing around with it again and notice that I can make the problem happen if i press any of the keys on the navigation pad except the top one.... and i can stop the loop by pressing the light button.
Weird or what.
My initial thought on this is maybe its got wet at some point
I have opened the xda up and stripped it down to all its parts. No sign of any dampness or dust dirt etc. Dont see anything missing or broken.
Put back together, but still doing this.
Driving me nuts.... its a great machine but is very tiresom to use with this going on.
Another think I notice about this machine, I have never used it as a phone, but I tried putting a sim card in and There is no sound through the earpiece. Only sound comes from the speakers when you set it to speaker phone.
I suggest just return it and have it replaced. It's probably a faulty button. Probably gets stuck whenever you press it.
Doesnt need a button to be pressed for it to start.. just starts by itself... and can stop by itself too.
Sometimes it can for ages without doing it, other times it does it all the time.
Cant figure if its hardware or software problem
GHOST-IN-THE-MACHINE
Yea... maybe I should get a priest !
I had this problem when i first got mine, if you move the sound slider down, then up, it seems to stop doing it for a while, and it hasn't happened in the last couple of weeks atall, maybe its because its new, and just needs to settle in?
Jay
Well at least I'm not the only one to have it.
My sound slider does stop it happening but only for a while and then it starts up again.
The machine is perfect in every other way, its just an annoyance I could do without.
I've tried everything, even stripped it down and left parts out, like buttons, to see if they are the source, but no difference.
I have the same problem!!!!!!!!!
Someone help please!!!!!!!!!!!!!!!!!!!!!!!
I have same problem. I send to service but until today they can't repair that problem.
Ok, Ive got a new problem with my XDA Exec.
Opened it up and tryied to turn on the backlight and nothing. tried a soft reset, nothingtried a hard reset now it just sticks on the splash screen, the red writing comes up on the right and side and just hangs there forever!
Please help
You're stuck. apparently the only remedy is turning it in to repair. For most of us it is under warranty.
Just off the phone to 02. Theres sending me a new one via courier on monday. it's less than a day old.
Is this a comon fault with the Exec?
erm ... I managed to experience this problem.
I was trying to uninstall SPB GPRS thingy that comes with the O2 package, and it just wouldn't go. I ended up deleting the program files and getting an error when it started up, so I deleted the GPRSNotify file under Startup. It never worked again ...
I got the splash screen, tried soft and hard resetting and various permutations (including standing on one leg and while holding breath) ... nothing. Did try to install fresh ROM, but startup wouldn't get far enough to let PC load ROM over USB.
Ended up contacting O2 who sent me a nice shiny new one, as it was only three weeks old. This time I haven't installed GPRS monitor thingy, and I don't intend to fiddle with it again ... or at least until I've forgotten my lesson ...
Sorry i ment to give you guys an update on this. I did manage to get it working again, although i still accepted the new one the sent to me.
What i did was installed a new rom off the 02 website. at 1st the computer couldnt see the phone so wot i did was enter what i think was the programming side of the phone. i found the instructions on how to this on the net. i think i pressed the 2 soft keys and the light switch while pressing the reset switch with the stylus (i think that was the buttons but unsure as i cant find the page again) when the screen light up again there was some faint writing on the screen with the word serial or usb. Double clicked on the rom file and 30mins later my phone was revived.
Funny it was the gprs monitor that i too installed before the phone screwed up? ive since installed it again on the new phone and have had no problems with it since.
trickydickyd said:
I think i pressed the 2 soft keys and the light switch while pressing the reset switch with the stylus (i think that was the buttons but unsure as i cant find the page again) when the screen light up again there was some faint writing on the screen with the word serial or usb.
Click to expand...
Click to collapse
Otherwise known as Bootloader mode
Aye, thats the one.
Cheers
Hi everyone.
This just started 2 days ago. This never happened before
When i turn on my phone everything is ok the screen is fine, but hen once it loads up its starts to lag. memory on the phone is not an issue. the scroll on the left side doesnt allow me to scroll down or up , the wheel moves but the on the screen nothing moves. Now the worse part is the screen.
When i turn off my screen and then turn it back on.. the colours are all messed up. the screen is a pinkish blue coulour and almost unreadable. i tried a soft reset and the screen goes back to normal but once I turn off the screen and turn it back on , i get the same problem.. Now do you think a hard reset would fix the problem?
I had this start last weekend. I had the screen issues and the hardware buttons were very sporadic in function. Most of the time they just didn't work.
I flashed back from Black Satin to the T-Mobile rom and sent it off for repair. Should hear back next week as to the outcome.
Is your under warranty? Just send it away.
Only downside is I've only got a Blackberry Pearl as a backup at the moment.....
The above advice is good. Before going for warranty repair though you should do a hard reset to rule out a software issue.
Mike
No its not under warranty. I have no idea what rom is on it. I-MATE ROM is what shows up when it boots up. So it sounds like a hard reset will be the first choice. im not very familiar with these things so pardon if i sound a bit off. i wouldnt even know how to flash or anything like that.
Well i tried to hard reset and it it seems not to be letting me do that.
just hold the left and right soft key and press the reset button at the same time and wait for a prompt to pop up.. nothing it just soft resets.. now im getting a bit frustrated.
Cakez said:
No its not under warranty. I have no idea what rom is on it. I-MATE ROM is what shows up when it boots up. So it sounds like a hard reset will be the first choice. im not very familiar with these things so pardon if i sound a bit off. i wouldnt even know how to flash or anything like that.
Well i tried to hard reset and it it seems not to be letting me do that.
just hold the left and right soft key and press the reset button at the same time and wait for a prompt to pop up.. nothing it just soft resets.. now im getting a bit frustrated.
Click to expand...
Click to collapse
Well, I assume you have tried a few times. It's difficult sometimes to get them all simultaneously pressed. Incidentally, just in case there's any confusion - the soft keys are actually the hard keys with dashes on the D-Pad.
Another way is to go to Sart>Settings>System>clear storage icon.
Just bear in mind that if there is a major problem it may fail completely and you end up with even more of a problem than now - but I guess there is no choice really.
Mike
Thanks for reading.
I'm currently using WM6.1 on the phone, and loving everything about it.
Since day 1, I've used a phone lock code, along with PIN1 code.
When unlocking the phone for after say an hours inactivity, the keypad will show, then the screen will go blank only showing the top bar of the phone.
Any press of buttons and screen will just make a beeping sound, and so far nothing I've done will restore the keypad to unlock the phone.
Is there anything wrong with the ROM i have, and is there anyone who can suggest how to correct this?
Please remember, the top bar still shows, and a reset allows the phone to work as normal (once logging back into it of course).
Thank you,
Hi guys,
Sorry to bring this back up, but this problem is still going on.
Not sure how to resolve it, so hoping someone would know how to solve this.
Thanks,
Posted twice for some reason.
Maybe is a sw failure,(50%) try to reflash with this fw: RUU_Hermes_CINGULAR_WWE_3625023_6275_1540700_108_UOOS_SVN05_Ship.exe
if your hermes its from att/cingular. after flash open and close the tap of hermes, if the blank screen continues or return this, the failure is hw (the flex component broken,bus, pcb) in this case you need to buy the spare part or send to sat.
good luck
other possible solution
http://forum.xda-developers.com/showthread.php?t=321163
Hi there,
Its not white screening, or anything else, I think the next time it does this, I'm going to have to take a picture, to make sure it can be understood clearly.
Basically, when bringing the phone out of standby (from pressing off/on button) and attempting to enter my pin into the phone the phone will allow me usually to press at least one number of my pin, and then it'll black screen, where the start bar still displays, but no response.
The handset isn't problematic when being opened for use, or anything else, its just annoying to have to reset to load the phone back up again.
I hope this helps?
Further to the above, here is what i've been talking about...
Happened last night, typically as I was bored, and had to wait till morning to take the photo...
Still no movement on this post...
Would it be suggestable to upgrade the install of WM?
If it is, how easy (will read guides beforehand) is it to do (reasonably, hard etc).
Just this is now my only phone, so don't fancy my chances bricking it.
Thanks!
Sorry to be posting yet again, but this has now happened 3 times a in row since last night. I wouldn't mind knowing if a rom fix would sort this, and if so whats the best rom to go for...
Just keen to get this sorted now...
Thanks.
If it helps, I've nothing running when this happens. The exception of last night, where I was using Audio Manager when walking home, and had to soft reset once in the door.
Hi
I am almost certain you have a software fault here and need to reload a new ROM - take your pick - my preference is schnaps - it isnt that hard to do and should solve your problem
Just go to the Windows upgrading section on here and follow the process - you will be happy
John
Hi everybody!
Just got my Leo two days ago and I was bombed. Had a 4350 before and you can imagine what big a difference that is. But now this occured and I really don't know what the heck is going on here. Without any reason the Leo froze after not using it for two hours, just an active sync connec. So I grabbed it and it was frozen. Thus i did a soft reset. When it rebooted, for some reason it seemed like the first time I started the device, asked me for the time and google settings etc. Very confused. But then I came to the Homescreen, which was blank, just like after a hard reset. Ok, I thought. This is nasty but all my stuff was backed up, so what. I tried to switch to the settings panel and found it ultra super slow and the settings panel wouldn't even appear on the screen, just the title on top. I thought, this is wrong, very wrong and decieded for another soft reset. And now it won't boot at all. It stands still in the screen where it shows this pink circle and the RUU and whatnot version.
I am speechless. It just doesn't start, tried it like 4 times now. I didn't update RUU or anything since this thing is T-Mobile branded and it wouldn't let me. I tried it this morning but just got the error in windows that my device won't allow... After that I took it for a 3 hour ride outside and used it for like 10 more hours. And now this!
Has this ever occured to anyone else around here?
Any suggestions? I'm quiet angry right now, think I gonna return it tomorrow. Hopefully they don't say I tried to flash it or whatever since I did not. Cannot explain this to me.
Regards,
Zoimt
hi sounds like bad news have you tried a hard reset
Do a hard reset, press the up and down volume then at the same time press the power button. Keep all three pressed for about three seconds and a hard reset will start. If it happens again you have a faulty device.
I thought a hard reset is only possible in windows. Since I never come so far in booting process, I just tried it once but nothing happend. Not sure if I tried it for 3 seconds I assume I did
zoimt said:
I thought a hard reset is only possible in windows. Since I never come so far in booting process, I just tried it once but nothing happend. Not sure if I tried it for 3 seconds I assume I did
Click to expand...
Click to collapse
Take the battery out then put it back in. Once it's in press all three buttons at once until you see the hard reset begin. It will ask you to confirm by pressing the up volume button.
Oh boy! It started again! I thought I tried to hard reset it with the key combo you also adviced me and nothing happened but this time it worked. Thus I assumed it only works at a later point in the boot process. But thanks for showing me the opposite!
Man, this takes a load off my mind, thanks! Just hope this was a one time thingy and doesn't occur every 28 hours again.
Regards,
zoimt