Related
Just got a s/h exec and I think it is faulty. Whats happens is it starts up ok and works for a while and then for no reason that I can think of it goes into a loop which stops it from working.
When I say a loop I'm not sure thats the right terminology but imagine if you tapped the start button and the start menu opens... and then imagine you tapped the tab button , the next item would highlight. If you tapped the tab button again the next item would highlight and so on. Well its as if the tab button is being hit over and over because all the items in the start menu will be highlighted one after the other over and over again.... it just goes round and round in a loop.
Its possible to escape from this and go to another screen but the same looping will go on in that screen too.
If you switch off and leave for a while and come back to it it works ok for a short time and thens starts the carry on again.
Sometimes if you just wait a while it stops, but will start doing it again even if you dont touch anything.
I've noticed one way to force it to stop is to slide the volume button... this seems to stop the loop and allows normal function for a while.... then the crazy looping starts again.
Has anyone seen this or know anything about it.
Nope sorry, maybe you can have it replaced where you bought it as from your post, you can recreate the problem easily.
Side Note : Have you tried Hard Resetting? Or installing another ROM?
I have tried hard resets and factory reset... problem remains.
Will try new ROM.... just trying to figure out how to do it !
weegee said:
I have tried hard resets and factory reset... problem remains.
Will try new ROM.... just trying to figure out how to do it !
Click to expand...
Click to collapse
Just download a new ROM form imate or something, unpack all the files in the ROM update to a directory, put the attached file in same directory.
Enter bootloader mode (Backlight + Power + Reset Hole) you will see SERAIL on the screen but not backlight so look hard.
Plug into PC, the SERIAL will change to USB
Run the attached file. You will see a photo of an S100 but continue anyway....
Hard reset when finished... DOne
ok have installed latest rom... but exec still doing loop loop
Just for arguments sake, can you try installing Imate's newest ROM?
yea thats the one i have just put on.
It seems to be doing the problem less than before. I notice that it does stop if i press the backlight key or move the sound slider.
I'm wondering if there is dust or dirt got in behind the buttons or something like that... although I would have thought other people would have come across this b4 if that was the problem. The machine is one of the first to come out, although I just got it a couple of days ago.
weegee said:
yea thats the one i have just put on.
It seems to be doing the problem less than before. I notice that it does stop if i press the backlight key or move the sound slider.
I'm wondering if there is dust or dirt got in behind the buttons or something like that... although I would have thought other people would have come across this b4 if that was the problem. The machine is one of the first to come out, although I just got it a couple of days ago.
Click to expand...
Click to collapse
If you have tried different ROM flavors and still get the same problem, then it is definitely hardware related. Send your unit in and demand for a new one not a repair
Just been playing around with it again and notice that I can make the problem happen if i press any of the keys on the navigation pad except the top one.... and i can stop the loop by pressing the light button.
Weird or what.
My initial thought on this is maybe its got wet at some point
I have opened the xda up and stripped it down to all its parts. No sign of any dampness or dust dirt etc. Dont see anything missing or broken.
Put back together, but still doing this.
Driving me nuts.... its a great machine but is very tiresom to use with this going on.
Another think I notice about this machine, I have never used it as a phone, but I tried putting a sim card in and There is no sound through the earpiece. Only sound comes from the speakers when you set it to speaker phone.
I suggest just return it and have it replaced. It's probably a faulty button. Probably gets stuck whenever you press it.
Doesnt need a button to be pressed for it to start.. just starts by itself... and can stop by itself too.
Sometimes it can for ages without doing it, other times it does it all the time.
Cant figure if its hardware or software problem
GHOST-IN-THE-MACHINE
Yea... maybe I should get a priest !
I had this problem when i first got mine, if you move the sound slider down, then up, it seems to stop doing it for a while, and it hasn't happened in the last couple of weeks atall, maybe its because its new, and just needs to settle in?
Jay
Well at least I'm not the only one to have it.
My sound slider does stop it happening but only for a while and then it starts up again.
The machine is perfect in every other way, its just an annoyance I could do without.
I've tried everything, even stripped it down and left parts out, like buttons, to see if they are the source, but no difference.
I have the same problem!!!!!!!!!
Someone help please!!!!!!!!!!!!!!!!!!!!!!!
I have same problem. I send to service but until today they can't repair that problem.
I just got my advantage a couple of days ago. i haven't had much time to use it yet, because of work. i haven't installed any sofware. Sometimes my device simpy won't wake-up. After soft feset, the only thing i did was connect a bluetooth headset, which worked fine. I turned off the screen, and when i came back to my device, about two hours later, it would not wake-up. I had to soft reset. This has happened a few times. Also, its very slow with entering text (When i finished typing the word 'text', 'soft reset' was just being entered on the screen.) It would be worse, but i stop to let it catch up, and check for typos.
It is really annoying to buy a new device and have to put up with this crap. Any help is appreciated.
If it were me, I would try a 'Hard Reset' and if that did not clear up the problem, call HTC for a warranty replacement. Hard Reset is hold the volume slider down while clicking the reset button on back of the device.
Brad Miter
I'm not having the issues with it not waking up, but recently I've had the issues with randomly occuring extreme slowdown, similar slow text entry, quick battery run down and insanely slow screen redrawing and general responsiveness to hardware of screen based input. I've tried soft resets, hard resets, trying to isolate software that might be causing it. So far it seems that the Illiumsoft Newsbreak feed reader I had been using for months without issue might be related to the problem, but I'm wondering if the problem isn't software specific but actually just related to data downloading activity. Thus far, I'm a couple days in without Newsbreak and no occurances of the problem...
Have you tried tapping the button on the lower right side of the phone (power button) sometimes mine does the same thing, good luck...TJ
i am going to hard reset, but with no software installed i dont know that this will help. i am considering switching to the (whats it called, black touch) rom. i dont know f this will help my current issue, but it sure looks nice. on all of my previous devices, i've always used the factory rom, and i'm somewhat clueless and intimidated by the whole process. I just dont want to screw up my new device. if anyone can help with any of these issues, please do.
TrekkerJmm said:
Have you tried tapping the button on the lower right side of the phone (power button) sometimes mine does the same thing, good luck...TJ
Click to expand...
Click to collapse
That's the problem, when i press the power button, nothing happens. I have to soft reset to get the device to come back on.
miterb said:
If it were me, I would try a 'Hard Reset' and if that did not clear up the problem, call HTC for a warranty replacement. Hard Reset is hold the volume slider down while clicking the reset button on back of the device.
Brad Miter
Click to expand...
Click to collapse
Concerning the warranty replacement, i bought this from a guy on ebay. It was still in the sealed box with compusa sticker on it, but i'm not sure if the warranty is transferable. Maybe if i could get him to send his receipt I would covered at least from his date of purchase. Anyone know specifics about the manufacturers warranty?
weaselcossey said:
i've always used the factory rom,
Click to expand...
Click to collapse
Well that's your first mistake...
Confucious said:
Well that's your first mistake...
Click to expand...
Click to collapse
Perhaps you could help me fix that problem by telling me how to install the black touch rom without screwing it up.
I'm obviously no developer, nor expert in any type of computer skills. I come to this forum because I love the device, my issues are usually resolved after some discussion here, the people are mostly friendly, and i'm interested in making my device better. I just need some help to do so.
weaselcossey said:
That's the problem, when i press the power button, nothing happens. I have to soft reset to get the device to come back on.
Click to expand...
Click to collapse
If you press the power quickly and lightly it should come back to
standard Today screen versus pressing and holding which brings up
the power off "pop up",at least that how my 7501 responds.
You may want to try that hard reset then play with Start/Settings
/System/Power.
bigtsr said:
If you press the power quickly and lightly it should come back to
standard Today screen versus pressing and holding which brings up
the power off "pop up",at least that how my 7501 responds.
You may want to try that hard reset then play with Start/Settings
/System/Power.
Click to expand...
Click to collapse
i understand that the buttons respond differently depending on how you press them (press and release, press and hold, etc.) The problem is sometimes, usually when i'm working and away from my phone for awhile, the device simply won't wake-up (power button or any other button pressed in anyway does nothing.) after a soft reset eveything seems fine. this has probably happened 4-5 times in 3 days. After hard reset its only happened once.
Sometimes my device doesn't seem to respond when i plug in the charger, nothing lights up. I've also noticed everytime i check .the battery meter, its alway a denomination of 10 (10%, 20%, 30%). I was sure this was going to be a great device, but i'm beginning to have my doubts.
weaselcossey
I had experienced this before but it is so rare that it's hardly worth mentioning. Are you using WM5 or WM6?
It is normal that the battery strength shows in increment of 10%.
If hard reset does not solve the problem, I would try to re-flash the ROM and see if the problem goes away.
eaglesteve said:
weaselcossey
I had experienced this before but it is so rare that it's hardly worth mentioning. Are you using WM5 or WM6?
It is normal that the battery strength shows in increment of 10%.
If hard reset does not solve the problem, I would try to re-flash the ROM and see if the problem goes away.
Click to expand...
Click to collapse
i'm using wm6, i'm currently using the factory rom on my advantage x7501, but planning to upgrade this evening.
I have this weird phone, I should say BRICK. My phone stopped working this morning after I cleaned the screen with a piece of cloth....the phone was in standby mode, when I did this.
Here is the story so far:
I was having problems with the hardware buttons, (messaging, internet explorer, the call and hang up buttons) the ones that everyone is been having problems with; so i decided to dismantling the unit following the steps shown on a Japanese website, basically by just looking at which screws to remove. By doing this all buttons functionality come back to normal so I had I fully working phone for about 3 days.
Now, all of a sudden the phone stopped working and refuses to go pass the "loading" message on the screen.
I decided to carefully dismantling the unit again, (I am now and expert in dismantlig dopos) but the problem persist.
I have also tried a hard-reset by pressing and holding the power button, the right/left soft keys and the reset buttong located in the lower part of the phone.....and still NOTHING.....
The phone was running Windows 6.1 (the stable version)....and now I am PHONE LESS...This is just incredible.....
Any help would be much appreciated....
If you are getting a message on screen saying "loading", taht does not go away, then your problem is not hardware but software.
The thing to try here is a full Hard Reset. (not a soft reset, have you tried this?)
Mike
Is this a Full Hard reset??
I have also tried a hard-reset by pressing and holding the power button, the right/left soft keys and the reset buttong located in the lower part of the phone.....and still NOTHING.....
Hard reset:
Press and hold the Left SOFT KEY and Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. You will be presented with a menu saying 'press R to reset, X to exit', if you press R Your device will be set back to factory default settings.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
I have done the hard reset, however the Soft keys do not work, hence I dont get a menu saying 'press R to reset, X to exit'...so it basically continues directly to CRC's ROM loading message...just as before...and it gets stuck there......
I tried the other option,....Bootloader mode: Hold side OK and POWER buttons together and reset with stylus, and this options does work, but there is no mesagge only a screen with 4 color bands, red, green, blue and white...and nothing else.
If you don't get the message to reset yor phone then you didn't hard reset.
Oh well....thats what i suspected....now the problem is since the soft keys dont work, then I cant do a hard reset....and the more i try the battery gets and will eventually run flat, (since the phone is not recharging either) in another words my dear dopod is slowly dying.....
Well the reason it's probably not booting up and the fact the keys don't work are likely the same problem. One of the flexcable connectors is most likely not seating in fully. I'd dismantle and take great care with all of them. Make certain of the central one - the one with the tape on it.
Mike
Exactly .....but i dont really know why these phones have this problem....as I said before I did clean up the contacts about a week ago and presto...everything started working fine again, but after 24 hours the buttons started playing up again....so it is impossible that things will change in such a short time......
anyway coming back to my current problem, I tried and tried to hard-reset the unit and this time I pulled the keyboard out and pressed hard on the softkeys and after a while it did work .....so I managed to hard reset the phone.....it only had 14% left in the batterry.....lucky me!!!!.....so I went home and started carefully adding all the extra bits needed, and guess what???? right in the last update the phone, again, did lock up........Luckily now I have a degree in dismantling dopos....anyone would like to hire me???? and I am an expert in hard-resetting dopos with actitude.......
I am happy now with my resurrected doppo but I am still a bit weiry about the soft keys not working......
FINALLY ......A big thanks to you guys for your help and comments.....
Hi everybody!
Just got my Leo two days ago and I was bombed. Had a 4350 before and you can imagine what big a difference that is. But now this occured and I really don't know what the heck is going on here. Without any reason the Leo froze after not using it for two hours, just an active sync connec. So I grabbed it and it was frozen. Thus i did a soft reset. When it rebooted, for some reason it seemed like the first time I started the device, asked me for the time and google settings etc. Very confused. But then I came to the Homescreen, which was blank, just like after a hard reset. Ok, I thought. This is nasty but all my stuff was backed up, so what. I tried to switch to the settings panel and found it ultra super slow and the settings panel wouldn't even appear on the screen, just the title on top. I thought, this is wrong, very wrong and decieded for another soft reset. And now it won't boot at all. It stands still in the screen where it shows this pink circle and the RUU and whatnot version.
I am speechless. It just doesn't start, tried it like 4 times now. I didn't update RUU or anything since this thing is T-Mobile branded and it wouldn't let me. I tried it this morning but just got the error in windows that my device won't allow... After that I took it for a 3 hour ride outside and used it for like 10 more hours. And now this!
Has this ever occured to anyone else around here?
Any suggestions? I'm quiet angry right now, think I gonna return it tomorrow. Hopefully they don't say I tried to flash it or whatever since I did not. Cannot explain this to me.
Regards,
Zoimt
hi sounds like bad news have you tried a hard reset
Do a hard reset, press the up and down volume then at the same time press the power button. Keep all three pressed for about three seconds and a hard reset will start. If it happens again you have a faulty device.
I thought a hard reset is only possible in windows. Since I never come so far in booting process, I just tried it once but nothing happend. Not sure if I tried it for 3 seconds I assume I did
zoimt said:
I thought a hard reset is only possible in windows. Since I never come so far in booting process, I just tried it once but nothing happend. Not sure if I tried it for 3 seconds I assume I did
Click to expand...
Click to collapse
Take the battery out then put it back in. Once it's in press all three buttons at once until you see the hard reset begin. It will ask you to confirm by pressing the up volume button.
Oh boy! It started again! I thought I tried to hard reset it with the key combo you also adviced me and nothing happened but this time it worked. Thus I assumed it only works at a later point in the boot process. But thanks for showing me the opposite!
Man, this takes a load off my mind, thanks! Just hope this was a one time thingy and doesn't occur every 28 hours again.
Regards,
zoimt
Just as i said - Argh! The screen is no longer responsive. What to do? I can no longer slide the lock across the screen. i have tried to flash the ROM with the 1.66 official but i cannot because it tells me to unlock the phone. I cant! argh! I've pushed the little red button by the battery a couple of times as well as removed the battery. Any suggestions? The hard buttons allow me to answer a call but that's it. i recently turned on the lock for the phone (today in fact) but I've unlocked it several times since doing so before this happened.
Sounds familiar...
Sounds like it is the same problem I had, as well as a few others on this forum. Even after a hard reset, it still didn't work. According to other people here, the solution is to have the screen swopped out for a new one. I've actually just sent mine in today to get it sorted out.
Just curious - I've got a suspicion that environmental conditions may have a role to play in causing the failure. What is the weather in your area like?
Very nice here today. Sunny, mid 50s(f).
I bought this off of ebay. Do i just send it in to HTC?
Try a hard reset, and if it doesn't help then make sure you have an official ROM and send it to HTC.
a hard reset is the little red button next to the battery, correct? ive done that.
and i cant very well change the ROMs at this point now, can i?
lythe123 said:
a hard reset is the little red button next to the battery, correct? ive done that.
and i cant very well change the ROMs at this point now, can i?
Click to expand...
Click to collapse
I would really like to wipe it before i sent it in. i dont want all my info, etc going into someones hands i dont know. anyway to do that?
No, that's a soft reset. Hard reset is pressing the red button while holding both volume keys until you get the "Restore factory settings?" prompt (when the device is on), then following the onsceeen instructions. This is what you're looking for to erase everything, including any possible software bug that could have caused the issue.
If the touchscreen still doesn't work then, send it in.
lythe123 said:
a hard reset is the little red button next to the battery, correct? ive done that.
and i cant very well change the ROMs at this point now, can i?
Click to expand...
Click to collapse
No! A hard reset is:
- Turn phone off
- Press vol up and down at the same time and then press power button (hold vol)
- follow the instructions on the screen
Be aware, that all you data on the phone will get lost. I recommend taking out the SD for that as well. After that u r done. By what you say i assume, that you didnt flash a custom ROM yet, right ?
Thanks! that didnt work either though.
I just want my money back now honestly. This thing, as pretty as it is, is just too much trouble.
Sorry double post...
A faulty device can happen to anybody, just bad luck... can't count how many times it has happened to me as well in the past.
I heard that there is a batch of phones that have a faulty screen, other problems are that without pressing anything the phone still registers clicks, phone doesn't always detect the correct place of where you pressed and the screen not responding.
I have got this on my phone and have arranged a pick up from HTC to pick up my phone for repair, hopefully in a week or two it will come back with a brand new screen that works
Ive had it a couple of months now. Im not sure if i can deal with the lack of apps that my iPhone has, pandora and the like, and the fact that teh HD2 would every so often change time and even date and i cant get weather in places my iPhone can.
In short, i love the HD2 for its specs but i no longer trust it at all.