Hello there!
I have problem with Typhoon M500 (similiar to ETEN M500).
I've upgaded firmware from original Typhoon's to Eten's (with patched EUU) from M200 GER V100 038 to M500 WWE 100 0039. It had worked - I did even install of my mother language pack (polish), but since I've unplugged it from USB, it hangs ;/ Soft and Hard reset doesn't help - it is stopping on post screen (M500), sometimes I have green test screen.
How to restore previous firmware? I've read, that I need to hold camera+power key and press reset key to enter boot mode, but this model doesn't have camera!
Can anyone help me, please?
Thanks in advance!
The Typhoon M500 is NOT the same device as the HTC Typhoon. The HTC Typhoon is a smartphone while the M500 is a PDA/Phone.
Related
i wwant install aku3.2 lsw rom
so i downgrade with RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
it was ok i do a reset software and now my phone block on a black screen (dopod,spl,ipl)
thanks for your help
To solve your problem I would download the origirnal Qtek ROM and then do the following:
What you need to do is the following:
1) Switch on the mobile
2) Connect it to USB
3) While stuck on the Dopod splash screen, press the Comm Manager button (lower one on the left) and while pressing it push the soft reset button.
4) DO NOT release the comm manager button until you see the boot loader screen (full of colours)/. This takes approx. 5 secs.
5) When in bootloader screen, start the ROM update that you downloaded from the Qtek website (executable).
6) This will start the normal ROM flash program
7) Enjoy!
thanks
wich rom ?
because my phone is a qtek s200
i put dopod rom ? qtek rom ?
thankssssssssssssssssssssssssssssssssssssssss
foufou55 said:
thanks
wich rom ?
because my phone is a qtek s200
i put dopod rom ? qtek rom ?
thankssssssssssssssssssssssssssssssssssssssss
Click to expand...
Click to collapse
I would suggest you put the Qtek ROM back.
hi all ..
I did flash my HTC wizard with new rom after finishing the install the device reboot and stacked on the boot screen then I tried to go to the boot screen but I couldn't , I tried to make hard rest but also I coudn't nothing is working even charing the device cant be made .
bye bye
Are you able to get to a multi-colored screen with numbers?
In case you don't know, to get to the bootloader screen hold down the camera button and press the power button.
now i got the same problem.
I updated the rom & now i have the multi-colored (red/green/blue/white) screen
with RUU - IPL 2.18 - SPL 2.18 - USB on it (Qtek 9100)
I downloaded the tools from Vippie in the thread "How to flash a new ROM to your Wizard... a little tutorial!" but those won't help...
anybody got any advice? I would like to install WM6...
thanks in advance!
Hello All
I have One SPV M3100 Here When power up it just Stays at Windows Mobile Screen cannot go further....Person says he tried to unlock at home using the Unlocked Radio (HTC HERMES RADIO FOR SIMLOCK V1.16.00.69)....
What to do now to repair it back ..???
Kindly reply Urgent help needed....
I tried to flash that unlocked radio again it stops at 39% all the time.....i tried 3 times but same.....
Not sure if it would work but have you tried a hard reset?
If that doesn't help see the Wiki it will tell you how to repair this type of brick. If it is in fact a brick
hi..
I installed a cooked rom.. but my p3600 has some problems and i have to send it to the brand. I have to install the original wm5 that i already have, but I don't know if the hard spl is automatically removed, or how to put it as it came originally to send it to the brand.
i dont have a lot of experience with this.. if anyone can help me please!
thanks
PlasticFX said:
hi..
I installed a cooked rom.. but my p3600 has some problems and i have to send it to the brand. I have to install the original wm5 that i already have, but I don't know if the hard spl is automatically removed, or how to put it as it came originally to send it to the brand.
i dont have a lot of experience with this.. if anyone can help me please!
thanks
Click to expand...
Click to collapse
You need to Cid unlock your mobile to flash with **** Roms
http://forum.xda-developers.com/showthread.php?t=293957
but i have flashed with cooked rooms.. and i want to put original to send to HTC because my pda have some problems.
its only need update with original rom? must remove hard spl (olipo v1.30) ?
and how?!
i don't think you can ... as your boot screen always shows even if you flashed FULL ROM from original (include SPL, radio, rom....)
when i press cam, power and reset button, i got this:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
(no more hard-spl 1.20 i think) is this ok ?
when i power on normaly, it shows the white screen "HTC" and some numbers and radio version.
Then the screen without the numbers and goes to WM5 that I updated from the file HTC P3600_RUU_Trinity_HTC_PTG_1.23.4...blabla.....
i think my p3600 is original ? and can i sent to the manufacturer now ?
(because my screen, somethimes have some lines and i must reboot, and then, sometimes the screens stills black..) :/
Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi
You must upgrade :
-Remove SD-Card
-Remove Sim-Card
-USPL
-Upgrade new ROM
thank. i got through to install wm 6.1.
can any one please tell me which is the most stable ROM for 6.1 or 6.5
which one is better for my HTC artemis.
please post link to the ROMs
I'm using two roms :
Shady313-23081R1 : http://forum.xda-developers.com/showthread.php?t=546805
dheewatara-s 23075B1 : http://www.pdamobiz.com/forum/forum_posts.asp?TID=255901&PN=1
same problem..pls help
i have same rom and ratio with u nomi...but my problem still occur...
where do u get the USPL eventually?