I have recently purchased a Mugen 3000 mA battery. I am thrilled with the extended battery life after fully charging and discharging it three times as recommended by the manufacturer. What I find annoying is that WM6 no longer gives accurate information regarding remaining battery strength. If I run the battery down to 2%, remove the battery and restart WM6 says 37%. At 2% I can repeat and WM6 still says 37%. After running down to 2% a third time and repeating WM6 says around 10%. After that it varies a bit but you get the picture.
What I would like to know is if one of you geniuses out there has discovered a registry edit, hack or 3rd party software that will provide accurate battery info so I don't have to be distracted by having my battery say 2% for hours on end or repeatedly remove and restart.
BTW, BatteryStatus Ver. 1.04.200 beta2 build 0173 reports the same incorrect info and so does SPB Mobile Shell 1.5 Home Tab.
Thanks in advance for your informed guidance. OK, that is laying it on a bit thick but I always highly recommend this site to anyone I know interested in really learning how to take full advantage of that little computer in their pocket.
Take a search on XDA for Ariel monitor maybe it solves your problem.
Thanks for the suggestion. It is a nice little program but it suffers from the same problem. I suspect I need to find a way to change the mA capacity WM6 bases it's battery calculations. I don't know if that can be done with a registry edit or if there is a third party battery monitor that has an option to change the battery capacity for calculation of percentage remaining or better yet auto detects the actual battery capacity. Ideally it would be able to both accurately read remaining percentage and make reasonably accurate time remaining estimates based on current and historical battery drain data.
It is like driving a car with a broken gas gage. Sure, you can use the odometer to estimate how much gas you have left but you are always worried your estimate is off and you will be left stranded without a phone ... oops crossed metaphors.
How do the rest of the users with extended batteries handle this irritating situation?
Bump. I can't believe i'm the only one with this problem.
I know this problem also i will wait with buying a high capacy battery until i find such a hack
The Kaiser uses a smartbattery. The battery capacity is based on the information that a small processor inside the battery tells the phone's main processor. There are several things that could be the problem:
1. The small processor in the 3rd party battery is programmed with the old specs for the standard battery. The is nothing you could do about this.
2. The small processor needs to be calibrated. You would do this as follows; set your phone to never turn off no matter how low the battery got. Now, run the phone down until the thing dies from lack of power. Then charge it all the way up. This should fix that issue. I don't recomend doing it many times, because it is not good for Lion batteries to be fully discharged too often.
This is a very valid issue which I have faced many times when using a 3rd party extended battery with other phones.
Not sure how to solve it though, although I have the 3000mah on order myself.
I think the battery reading is given by the battery itself, and most of these 3rd party manufacturers don't really care to put a smart processor in the battery (to reduce costs/make it smaller/etc).
I have the exact same issue and although it is a nuisance, I have found a workaround to keep using the phone. Simply physically removing the battery and replacing it will increase your remaining battery power substantially. I normally wait till the first low battery reminder to do this. Also, how do I set the phone to never turn off no matter how low the battery gets? This would also be fine with me.
utbiglall said:
I have the exact same issue and although it is a nuisance, I have found a workaround to keep using the phone. Simply physically removing the battery and replacing it will increase your remaining battery power substantially. I normally wait till the first low battery reminder to do this. Also, how do I set the phone to never turn off no matter how low the battery gets? This would also be fine with me.
Click to expand...
Click to collapse
I didn't run into this issue until I reflashed my ROM to one with W6.1. Then, rather than get 12-13 hrs with my 3amp battery, I'd get 6. I used my original battery, but when I put the 3amp back in, I still had 47% left.
It's the ROM, and until there's a fix, it would be a pain to pull and replace the battery just to work around. I've done this several times recently when I'm on battery power, but I'd rather not.
Anybody heard of any other fixes, outside monitor, or do we wait until we get a Windows Mobile 6.1 fix?
Still no luck?
Hello,
Has anyone been able to find a solution for this. I am ordering the extended battery today. I will try to fully discharge it and then recharge it as was suggested and report back.
I emailed Mugen. We went back and forth with them trying to troubleshoot whether it's the battery or OS. They were clueless, but did offer an RMA to replace the battery. I pay the postage. Not sure if I'll send it back if it's the OS. I pull and replace the battery right now. It's a real pain, and I hate opening the case so much, but it's the only way I can get an accurate read.
PhoenixAG said:
This is a very valid issue which I have faced many times when using a 3rd party extended battery with other phones.
Not sure how to solve it though, although I have the 3000mah on order myself.
I think the battery reading is given by the battery itself, and most of these 3rd party manufacturers don't really care to put a smart processor in the battery (to reduce costs/make it smaller/etc).
Click to expand...
Click to collapse
The processor is required for these types of lithium ion batteries because it regulates the charging of the battery. If it didn't the battery would not charge properly, or maybe not even charge at all.
There is no solution for now, people from other forums tries to patch battdrvr.dll.
But two things may help a little:
1.You may completely disable battery monitoring
HKLM\Drivers\BuiltIn\Battery rename or remove string battdrvr.dll
But you lost monitoring completely.
2. change HKLM\Drivers\BuiltIn\Battery\Order change value from 15 (in my case) to 0. - After this battery lasts longer until power off.
There is not complete hardware or software solution for this problem. We need to wait.
Low Battery warning:
By default, a PPC will sound a warning sound when the battery is running low (10%, fixed value), but there's no way to disable or change the notification. To enable this, so that it is visible in the "Sounds & Notifications" control panel, set:
HKCU\ControlPanel\Notifications\{A877D663-239C-47a7-9304-0D347F580408}\Default = "Low battery warning" (REGSZ string, no quotes)
Anybody have any updates on this? I have noticed this more on WM6.1, but it was still an issue on WM6. I just find this so annoying!
Is there any radio that can fix this? I noiced that this battery reading issue only occurs when the Phone Signal is on. When off, it never happens to me. Or it seems. So it has something to do with the radio.
bump, anyone got a solution?
this is very interesting, i bought the seidio 3200 battery i am having the same problems. i just tired the
change HKLM\Drivers\BuiltIn\Battery\Order change value from 15 (in my case) to 0
i am going to see how that works out throughout the day
Tried It
I am having same issue, reset the registry key to "0" and ran for a full day, no change, still incorrect reading. I have a 2700 Mah battery and the charge indicater is completely wrong on it. I have cycled the battery as per reccoemndations, but still get wrong power remaining readings. Can remove the battery and resets itselft to a more correct reading.
I am out of ideas, guess we need someone from HTC to chime in with a hardware fix.
MWS
ms0529 said:
I am having same issue, reset the registry key to "0" and ran for a full day, no change, still incorrect reading. I have a 2700 Mah battery and the charge indicater is completely wrong on it. I have cycled the battery as per reccoemndations, but still get wrong power remaining readings. Can remove the battery and resets itselft to a more correct reading.
I am out of ideas, guess we need someone from HTC to chime in with a hardware fix.
MWS
Click to expand...
Click to collapse
i have tried it too and it still does the same thing. i would still need to pull the battery and restart the device for the batt meter to get a more accurate reading. i could do it about 3 times before the battery dies completely.
is there this problem with all extended batteries or just with the larger ones?
the reason I ask is that I've got a $17 credit at Amazon and was thinking of grabbing a 1600mah battery, it's only like $22 with ship so I'll only pay a few bucks for it really...
I wanted to get the larger one but it's fat and won't fit standard carrying case, but the 1600 is slim and will fit in place a regular battery
Can anyone direct me to a list of the reg changes that improve battery life on the diamond? I had to hard reset and now I am unable to find the list again. My battery is draining like crazy!
I did try searching the forum to for all you wiseguys.
i used Advance config 3.3 and my battery has improved dramatically.
Ok thanks I'll give it a shot
so what i can i to maximize battery life? i've turned off gps, turned off wifi when i'm not using, turned off mobile data, lower brightness when i can.
ANYTHING I'M MISSING? please help
jinjin12 said:
so what i can i to maximize battery life? i've turned off gps, turned off wifi when i'm not using, turned off mobile data, lower brightness when i can.
ANYTHING I'M MISSING? please help
Click to expand...
Click to collapse
Did you obtain root? If you did not, then there is not much else you can do. The only thing left is juice defender. While it does prolong battery life, most people have found that it causes more problems along the line.
if you do have root, then you can flash customer kernel, which helps battery life a lot.
Franco Kernel http://forum.xda-developers.com/showthread.php?t=2002782
very popular around here, but I found it unsatisfying.
Trinity Kernel http://forums.derkernel.com/index.php/topic,47.0.html
also very popular
disable google latitude in google maps. automatic reporting of location.
Heyy, so i figured out how to get a better battery life off of your htc one device! If you go under settings>apps>all, and disable the ones you DONT use as much or at ALL it will help out a whole lot. I also only use the power saver option, i keep sleep mode turned off...
I have also posted a picture of what my battery usually is from day to day...
Would love to find out what everyone else does to save battery!
There are already a few similar threads
Battery Stats Thread
One Battery saving tips
Please continue the discussion there.
Closed
Hey there from France,
I have a quick question for you all S edge+ owners.
Very happy with it, but I'd like to tweak some battery saving features. In that respect, what does the regular (not "Ultra") Battery Saving mode exactly do once tunred on?
There is a brief description of course, but I was wondering if it does such stuff as "limit background data", or resorts to location pinging less often, other than the basic "reduce CPU".
Thanks in advance !
well
When i turn on the battery saver, my phone has some lag issues and the brightness turn into lowest, but it seems that the battery is not improve.