i ve bought a new housing for my htc prophet , i-mate jamin, qtek s200
i am replacing the housing now, but i have a problem with touch screen
i tried the prophet without the front housing, it works
but when i assembly and screw them, touch screen dont work
please help anybody
i placed the pda to its original housing now everything fine,
touch screen working
what can be wrong with new housing?
any connectors on front?
Related
I'll describe everything from scratch so you'll know what the problem is. So, I had 2 MDA Vario II, both developed a fault (on one when I pressed the button on na hardware keyboard it showed two letters on the screen instead, on the other the backlight under a couple of letters stopped working) so I dissasembled them and out of two faulty, I had one working and one working so-so.
As I wanted the other one to be sorted (the connector to the hardware keyboard was burned in some places on the mainboard and the keyboard tape connector as well), I was shopping for some faulty ones on eBay and yesterday I bought an original TyTN with LCD screen not working. I dissasembled both of them and connected the full LCD fascia with the screen to the mainboard of the TyTN (so that now I've got the LCD housing from T-Mobile, but the rest from HTC) and everything is working perfectly... however I'd like to use TyTN only housing and possibly buy a new one on eBay (but keys on the bottom are different for Vario II and TyTN).
I do know that LCD screens are incompatible, in the TyTN I have the HITACHI and in Vario I got the TOPPOLI (however the whole thing works with the mainboard, as both of them have the same product codes)...
But does someone know if I put the whole LCD from the Vario including the tape and top buttons in the fascia of the TyTN and connect it to the bottom buttons circuit, it will actually work. I will do it anyway, but if someone was doing it in the past that would motivate me to fiddle with it tomorrow
Sorted.
For all those with NOT working LCD screens/keyboards/mainboards...
As I the LCD screens are not compatible and we often do not know what we are going to get off eBay, lots of people face the problem of buying something that may not work with their version.
I needed the mainboard and the keyboard in my Vario II (HERM300) and I bought HTC TyTN (the original one, HERM200) with not working LCD (backlight working but nothing could be seen on the screen). As you may be aware that TyTN has got an extra button for 3G and Vario II not, I was wondering whether the whole thing would work. I replaced the full LCD screen with the tape including the two top buttons and connected it to the bottom circuit of the original TyTN. After assembling everything back, I switched it on and it's working without any problems. So if you have the same problem and can get hold of a cheap Hermes for spares on eBay, as long as you replace the whole lcd with tape it'll work regardless of your version...
Useful info thanks. That question was asked before and I don't think anyone gave an answer. Good to know it will work despite the different button layout.
cheers
Mike
spv m500
--------------------------------------------------------------------------------
hi everyone need some help if possibly
i have an spv m500 with a damaged housing i have tried the 02 xda housing but having problems with the buttons around the outside, aslo trried the imate jamin housing this was ok but the front panel buttons were slightly different nd the rear case could not press the little button down which doesnt allow the phone turned on with the back off.
has anyone got a spv m500 housing for sale or any other housing that would fit
thanks
lee
hi guys i have 2 HTC 3600 devices and both is working only if i twist them to the left and if i they boot and works on today screen , and leave it ,,,the screen hangs ...
can you pls find solution for me ,?
i don t want loose 2 PPC ,,,
i don t know why both has same problem ,,, are these edition of HTC is not good quality\
pls help
i used many ROM ..even the Original form HTC ,, but i have the same result
The problem is the flex cable connection of the display or keypad to the motherboard.
Check if the display flexcable is well aligned and properly inserted into the motherboard slot.
Place a piece of paper or other soft material on the two connectors (display/ keypad) to improve the pressure from the back cover in these components.
Ok the thing is that i bout an qtek 9100 with broken LCD Display and no touch and i changed the lcd from an imate jamin/O2 xda neo, now the problem is that when i turn on the phone the screen shows lots of thin lines in color's but when i put the broken lcd it works any solution or idea to solve this problem.
Thanks.
Ok the thing is that i bout an qtek 9100 with broken LCD Display and no touch and i changed the lcd from an imate jamin/O2 xda neo, now the problem is that when i turn on the phone the screen shows lots of thin lines in color's but when i put the broken lcd it works any solution or idea to solve this problem.
Thanks.
EDITroblem found: LCD Screen the flex cable.