Ok the thing is that i bout an qtek 9100 with broken LCD Display and no touch and i changed the lcd from an imate jamin/O2 xda neo, now the problem is that when i turn on the phone the screen shows lots of thin lines in color's but when i put the broken lcd it works any solution or idea to solve this problem.
Thanks.
EDITroblem found: LCD Screen the flex cable.
Related
hi i have just bought a new lcd screen and when i connected it it lit up. but as i tried to fit it in the casing sumthing mustve went rong. i then realised the flex cable of the lcd was really bent, and one of the pins of the lcd socket is out of proprotion. now the lcd wont even light up. my old lcd i have, wen connected saw some life (only some leds lit up) however since it was broken the screen remained blank.
any advice on the problem ? thanks
Hi, I replace the LCD of my HW6915 and now the backlight function don't work...
The LCD is "out of light" and the sistem is on the maximum backlight.
There are any for fix this problem??
In the past I don't know if the problem was on the IPAQ, I bought it with broken screen
Thanks
most probably the lcd cable is loose .you can put a tape on the connector to make it firm.
Ok the thing is that i bout an qtek 9100 with broken LCD Display and no touch and i changed the lcd from an imate jamin/O2 xda neo, now the problem is that when i turn on the phone the screen shows lots of thin lines in color's but when i put the broken lcd it works any solution or idea to solve this problem.
Thanks.
So my friend got huawei X5 U8800, it had shattered screen which worked fine. So he bought new screen (I think it's called digitizer, the LCD itself was intact) and installed it. Now only the soft buttons work. Is there something that could cause that? Apparently there was only one ribbon cable to connect.
Sorry if I'm missing something obvious.
If the soft buttons work, the problem might be in the digitizer, as the soft keys are actually just extended touch screen. So it might be a faulty digitizer. And there is only one ribbon cable on the digitizer connected to motherboard.
Blefish said:
If the soft buttons work, the problem might be in the digitizer, as the soft keys are actually just extended touch screen. So it might be a faulty digitizer. And there is only one ribbon cable on the digitizer connected to motherboard.
Click to expand...
Click to collapse
Thanks for your input. I'm not very familiar with these screen replacements (never had to do one). So can I assume that it should work like "plug and play"? If that the case then I assume that the phone itself has some problems of it own or the digitizer is faulty like you said.
Also sry for my english, not my native language etc.
Hi all,
I had a touchscreen issue (sometimes not working) in my HD2 so I ordered a new fabric screen+lcd assemby. I replaced it very carefully but now when I plug new lcd it is not working. Phone is working, buttons, vibration, hear the sound when turning on but there is only backlight on display and just shows black screen. I am sure that display is ok because I tried to put old one (wich was still working before replacement) and it has same issue (backlight works but display is black). Can you give me some ideas what is wrong ????
damaged lcd ribbon connector on mainboard or ribbon not being inserted fully or latched securely
Ty booting to bootloader ...
Help
The flex cable is not attached correctly or the main board is broken and before you close your phone try it. If you can't do this give someone your phone and he will recover for you.
The problem is sloved. I dissasambled all phone and fix it once again and now it works. Anyway I got another problem of white screen on my second device. Did anybody find a solution for white screen ever????
wojcimierz said:
The problem is sloved. I dissasambled all phone and fix it once again and now it works. Anyway I got another problem of white screen on my second device. Did anybody find a solution for white screen ever????
Click to expand...
Click to collapse
Have you tried turning phone on with volume down button pressed???
You should see 4 colors. Try this. I search for you.
http://forum.xda-developers.com/showthread.php?t=2263026
try with this link.
Yes I have read this before but I think that white screen problem is not sloved in this thread. But maybe I could be wrong.