Database Users

Display from s100 in a s200

Hi everybody
I became a s200 with a broken display. Now I changed the display in the s200 with a display from a s100. Because there are the same specifications. The touchpad is well but the sreen resolution is like 8bit. Have someone a idea Or is it not possible.
When I take the broken display the color are well! But the touchpad is broken .
Sorry for my english...
Thanks

the screen on the s100 in a low res one (well, lower then the one on the s200)
try changing between the two digitizers (thouch pad) of the screens, and then you will get a s200 res screen with the working s100 digitizer.
It's really quite easy, you just solder the 4 conectors to the new touchpad and thats alll!!!
If you need instruction on hot to do it feel free to PM me

TEL ME WHERE DID YOU BOUGTH THE S100 SCREEn
blackmail said:
Hi everybody
I became a s200 with a broken display. Now I changed the display in the s200 with a display from a s100. Because there are the same specifications. The touchpad is well but the sreen resolution is like 8bit. Have someone a idea Or is it not possible.
When I take the broken display the color are well! But the touchpad is broken .
Sorry for my english...
Thanks
Click to expand...
Click to collapse
Hi blackmail,
I have an S100 with a broken LCD and I saw you post. I need an S100 screen, with the part reference 60.h480w.008 and Acer wants 260 euros for the repair. Where did you bougth the s100 display?
Many thanks,
Jean

Display flickering

Hi Guy,
i bought a used Qtek 2020. The problem is that sometimes (irregular) the display flickers, especially the upper left corner. Sometimes the whole display is unreadable.
I think it's no software problem I have tried WM2003 and WM2005 the problem still exists in both versions.
Any hints?

hv u tried to replace the LCD?

URGENT HELP about PROPHET HOUSİNG

i ve bought a new housing for my htc prophet , i-mate jamin, qtek s200
i am replacing the housing now, but i have a problem with touch screen
i tried the prophet without the front housing, it works
but when i assembly and screw them, touch screen dont work
please help anybody

i placed the pda to its original housing now everything fine,
touch screen working
what can be wrong with new housing?
any connectors on front?

HW6915 backlight don't work....

Hi, I replace the LCD of my HW6915 and now the backlight function don't work...
The LCD is "out of light" and the sistem is on the maximum backlight.
There are any for fix this problem??
In the past I don't know if the problem was on the IPAQ, I bought it with broken screen
Thanks

most probably the lcd cable is loose .you can put a tape on the connector to make it firm.

[SOLVED]Qtek 9100/Wizard Hardware Error

Ok the thing is that i bout an qtek 9100 with broken LCD Display and no touch and i changed the lcd from an imate jamin/O2 xda neo, now the problem is that when i turn on the phone the screen shows lots of thin lines in color's but when i put the broken lcd it works any solution or idea to solve this problem.
Thanks.
EDITroblem found: LCD Screen the flex cable.