Ok here is what I did.
Installed one of the Touch ITs on my wing, then after some time installed BTAudio to stream music then I decided to update to the new IT Touch but left the BTAudio on. After flashing my phone without installing BTAudio it still acts as if it was still installed. everything streams right through and can't turn it off.
Steps I've taken so far:
re-installed BTAudio and turned it off and re-flashed and still the same thing.
Installed BT Audio tuggle, no luck. Any ideas??
I have a T-mobile with PDAVIET installed and Samsung WEP200 headset.
Do you have PDAVIET or TouchIT? Have you tried flashing back to the older version? It might be a "feature" or a bug of that version you're using. Also, please post this in the TouchIT thread that it refers to. That way you can get better help and it avoids clutter. Thank you.
I haven't tried using the older version that might have caused this to happen. I currently am using PDAVIET, reinstalled BTAUDIO v 1.0 to undo what it did and no luck. I'm going to reflash to the older version where it all started and see what happens. Reply back soon.
Is there a program that would change the PTT (Push-to-talk) on my bluetooth headset??
Related
I flashed to no2Chem 2.0 rom everything worked fine except bluetooth headset. Decided to downgrade to 2.17 cause I dont use gps as often as I thought. So I flashed last night via sd card rom loads fine, do softreset before sprint mods. screen turns on fine but if sleeps does not wake up. Tried flash via pc this morning to 2.09 same problem.
Artanis said:
I flashed to no2Chem 2.0 rom everything worked fine except bluetooth headset. Decided to downgrade to 2.17 cause I dont use gps as often as I thought. So I flashed last night via sd card rom loads fine, do softreset before sprint mods. screen turns on fine but if sleeps does not wake up. Tried flash via pc this morning to 2.09 same problem.
Click to expand...
Click to collapse
Did you install the old bootloader/unlocker/locker?
I just installed DCD 2.3.2, which to my knowledge is one of the more recent ROMs that supports GPS. Everything works perfectly, until I install some sort of mapping software.
I've re-flashed my ROM about 5 times tonight trying things and I've narrowed it down to when I install something like Live Search or Google Maps.
Once I install the software, they run and when they're trying to acquire a signal from the GPS the unit randomly resets. Once it does this once it does not stop doing it. I'll get back to the home screen after the reboot and 30 seconds later it will restart once again. I even managed to uninstall Live Search the second time before it restarted. It completed the uninstall and lasted a whole 2 minutes before the next restart.
Any ideas??
UPDATE: I'm using titan_radio_3.27.00.exe.
I've also Tried using DCD 2.1.0 Telus, and the same issue happens. The machine just reboots after installing Google maps or Live Search.
I would try re-installing the radio.
jjlwork said:
I would try re-installing the radio.
Click to expand...
Click to collapse
Forgot to mention that I've also done that a couple times too. Two different versions too.
Thanks though! Keep the ideas coming.
Sorry to hear that
I just upgraded today and haven't had any problems. DCD 2.3.2 and the radio and everything. I've tried google maps, mapopolis and iGuidance all without any problems-in fact the internal gps is faster by far than my old bluetooth one.
I used the kitchen method to make the dcd rom, but didn't really change anything except for putting windows live back in.
I'm in the vancouver area on Evdo, if that info is helpful.
Are you using the correct bootloader?
ghettofreeryder said:
Are you using the correct bootloader?
Click to expand...
Click to collapse
Which one would that be? I don't remember which one I used.
http://www.fileshex.com/download.php?file=b8a2c4622ebdb1c857ac6cf068e6f818
this one.
and then do the radio and then the rom! work great here so it has to work for you also
xvicx said:
http://www.fileshex.com/download.php?file=b8a2c4622ebdb1c857ac6cf068e6f818
this one.
and then do the radio and then the rom! work great here so it has to work for you also
Click to expand...
Click to collapse
I installed that, and then I installed the titan_radio_3.27.00 and finally the ROM (Telus) from this page:
http://forum.xda-developers.com/showthread.php?t=371314
It worked!!!!!!!! THANK YOU
Happy for you
i installed wm6 the other day on my spvc500 and everything went well.
the phone started, but when i gave it a restart, it just wouldnt connect to my network...
it stays in NO service state and does nothing...
i really dont know what to do...please, help me...
i'm freakin for not knowing what to do....
WM6 problem & SPVC 500
HI,
I had the same problem and I know explanations.
Problem is in software which you installed after flashing WM6 to your SPV.
When you installing software everything is working on 100% ,but after restaring mobile
phone starting very long time ,doesn't have signal and time on main screen.
You have only one option ,re-flash WM6 again ![/COLOR]
Uninstall software hasn't influence!!!
be carefully with installation new software, I don't know where is problem exactly >
Here is list of software which is working without problems on my phone:
Extreme agenda 3.02
Smart explorer 2.1.4.553
SP Task Manager 2.1.1.315
Slovo ED
Adobe reader
Don't install :
profile switcher
cele task
If you are using different software you have only one way how to find "good" and "wrong" software.
After reflashing WM6 install only one program and restart the phone if everything will be working program is OK.
But if no you have to reflash WM6 again !!!
Be careful, all your data will be lost.
I got the same problem, after installing some software i got no network anymore.
Also the menue did not respond anymore on pressing 'Start'-button
I had to flash my Amadeus again, because also a hard-reset didn't help.
Now i think i have installed all the software again and it works still well
edit: 10 minutes after i rebooted my amadeus and BANG, nothing works anymore.
Crap.
I think the problem is 'facade', a tool to show a schedule on the homescreen.
it all works now
well, i managed to solve my problem...
the thing was to flash this WM6 and now everything works jut fine...
i can finally say that i am pleased with my c500!
Before I try this Version of WM6: Do you use Facade?
I flashed my Amadeus with WM5, installed Facade, rebooted and nothing worked. After that I flashed WM 6, did not install Facade and everything is ok
I got the same problem, but after hard reset everything was ok, so reflashing WM6 was not necessary.
Hello,
I was using multiple ROMs with RADIOs 2.05 and 2.08 and everywhere was this problem - when I calling to someone and press End Call (HW or SW button), phone doesn't end calling, only button get grayed, but it is still ringing.
Please, do you know what could help? Thank you.
bluetooth?
the only time I get this is when it connects to my in car bluetooth it never disconnects the call properly any rom!
DJGurth said:
the only time I get this is when it connects to my in car bluetooth it never disconnects the call properly any rom!
Click to expand...
Click to collapse
i get that issue sometimes as well.. i found it worked ok after i made sure the in car bluetooth was automatically allowed to connect to anything it needs.. followed by a soft reset.. should only be the once though
Ok this is interesting. I had never had this problem but now I have flashed to Flashmores latest and the ROM is great and fast (and yes I did hard reset after flashing) but now I have this problem.
When I'm in a call none of the touch keys work. Cant access the keypad or anything. Really annoying.
I have to use the hard key to kill the call.
Any thoughts?
Oh and I dont have a bluetooth headset!
GG
It's independent on Bluetooth and same problem is with hardware- and software- keys (buttons).
I have the same problem...Which ROM versions do you have? mine problems started after flashing ROMs from TMOUS...so versions 1.7 to 2.10...I will revert back to older ROMs...
I think this problem was also in stock ROM about 1.42..
Hi guys,
For those problems, I advice you to do these steps in order whenever you want to flash a ROM (stock,shipped,cooked ROM). If you want the stable ROM for daily usage... just flash the shipped ROM
-Choose Clear Storage in you current ROM.
-Take out your SD card and Format it by (FAT32)
-Connect your Device to PC and do a MTTY... You can read this for more details (do it in careful way)
-Then Flash the Shipped ROM 1.66 I suggest the 1.66.405.2 WWE.
-Do not hard reset after flash... I mean let your device through the "Customization" first then just skip all setting and Reset the device. While the device is getting reboot... Do a hard reset
-Setting up all things.
Hope this help
it doesn`t work I think this problem is according to radio ROM. I will flash another...
i had this problem yesterday and have fixed it
ceratin roms are only compatible with certain radios
for example yesterday i installed SONE 2.5 and i couldnt make calls, it would freeze
i looked at the ROM requirements and i was using a radio not supported by the ROM
simply change the radio respectively to the ROM
This problem, which I'm describing, is something other. RADIO patch is okay (I think), but phone is "slow" during phonecall and phonecall cannot be hanged out..
Hi,
I've been trying to use CM6 and CM7 but with both versions I run into Bluetooth pairing issues. The main problem is seen when trying to pair from my phone to my car. I get asked to enter a pin (that has been displayed by the car), but only get a few seconds to do so before I get an error message displayed. I've tried various kernels (same problem), and I'm using the latest radio rom. Things seem to be fine with stock 2.1 and with wildpuzzle. When flashing the roms I'be made sure I clear the cache, the dalvik cache and reset to default. Is there anything else I can try?
Thanks
Andy
Hi Andy,
Did you ever get a fix for this? I am having a similar issue, however my device does not give me a prompt at all for the bluetooth passkey.
Thanks,
Jessica
Use bluetooth file transfer from market. It works
Didn't work for me, still looking for a way round this.