everything was fine, no problems with the phone at all, than I installed Duttys 4.1 rom and ever since the camera doesnt work. I got the camera to work once since then by un-ticking the camera tab from the Touch flow, soft resetting, then ticking the tab again but now thats not even working. I have installed 2 diferent roms since then and it still doesnt work. also the photo album doesnt work from that tab anymore but does in the program list where as the camera doesnt work at all.
Any help would be great
Have the same problem myself and have yet to find an answer
I found a guy that used advanced config to change one of the camera settings but I tried it and it didnt work
When you flashed the ROM, did you put the phone into boot loader manually, or did the installation software do it?
the installation software did it
dB Zac said:
I found a guy that used advanced config to change one of the camera settings but I tried it and it didnt work
Click to expand...
Click to collapse
I tried that myself and it worked for a while (a couple days) then the camera stopped working again. That trick has not worked since that first time. I have changed roms a couple of times and still nothing.
dB Zac said:
the installation software did it
Click to expand...
Click to collapse
Same here. Also I did accidentally install a rom with the wrong spl and had to hard spl after installing the rom. I think I went from 1.14 to 1.56 or something like that. I had a green tint to the screen until I did the hard spl. I have installed many roms since then and have not had a problem. I did not have a camera issue before this but the camera did work for quite a while after the spl issue. Hopefully this makes sense what I am saying.
so you are saying your camera was fixed after you "re- hard SPL'd" your phone?
dB Zac said:
so you are saying your camera was fixed after you "re- hard SPL'd" your phone?
Click to expand...
Click to collapse
No, I have an unlocked telstra phone and I had flashed my rom a couple times without needing to hard SPL my phone and never had a problem with flashing roms or the camera. It was only after I flashed to a rom that needed the phone to be Hard SPL'd and I didn't properly Hard SPL my phone before flashing the rom. I got the wierd "green tint" to my screen and realized that i had incorrectly Hard SPL'd. I quickly realized my mistake and then did it correctly and then the newer rom worked fine. It was a couple weeks later that the camera stopped working. I can't remember if I was on the same rom or not from when I Hard SpL'd my phone.
Sorry if this is hard to follow.
My thought is, did my upgrade without properly Hard SPL'ing my phone damage the camera or is it something else. Again, I have since properly Hard SPL'd my phone and flashed many roms since without a problem except the non-working camera.
well I don't know but I hard SPL'd my phone the day I got it with the 1.56 HSPL and I have used may roms on this phone. The rom I installed when this happended was duttys WM6.1 rom
dB Zac said:
so you are saying your camera was fixed after you "re- hard SPL'd" your phone?
Click to expand...
Click to collapse
I was trying to revert to an older Hard SPL 1.14 and install an older rom to see if that did the trick. Anyway, in my haste I screwed up and installed the older Hard SPL 1.14 and forgot to add in the older Rom so I ended up with the green screen of death. I couldn't get it to connect via activesync and put it in bootloader mode and re-Hard SPL'd it to 1.56 and the green screen was gone. I was about to go back to the Hard SPL 1.14 with one of Duty's older pre 1.56 Roms but thought I would check on the camera again one last time.
Now the camera works. Again, this is not the first time I have gotten the camera to work and I have no idea how long it is going to last but it is working and I am not going to mess with it anymore right now. I will leave the Hard SPL 1.56 and Miri's WM6.5 Rom that I have on the phone alone and see how it goes.
I know this is not a complete answer and I don't know if just re-Hard SPL'ng will work but it is worth a shot. Again, I downgraded first 1.14, screwed up the phone the went back to 1.56 and the camera started working again. At least I know that it is probably not a hardware issue as I have no where to send it back to for repair. All is well in Wisconsin for the time being.
Well two things:
1st can you just tell me exactly what you did, step by step. If I understand you correctly, I have already tried this but there may be a step or 2 that I missed. please include the roms you went from and two also
2nd, just called HTC and they said my the #'s my phone still has some warranty left and they will honor it in the states (I will reflash to tesla rom and the stock SPL before I send it)
Thank you for keeping me up to date on what you have done to get yours working. If your camera fails again, just call the # on the US HTC customer service site.
x5-rwk said:
I was trying to revert to an older Hard SPL 1.14 and install an older rom to see if that did the trick. Anyway, in my haste I screwed up and installed the older Hard SPL 1.14 and forgot to add in the older Rom so I ended up with the green screen of death. I couldn't get it to connect via activesync and put it in bootloader mode and re-Hard SPL'd it to 1.56 and the green screen was gone. I was about to go back to the Hard SPL 1.14 with one of Duty's older pre 1.56 Roms but thought I would check on the camera again one last time.
Now the camera works. Again, this is not the first time I have gotten the camera to work and I have no idea how long it is going to last but it is working and I am not going to mess with it anymore right now. I will leave the Hard SPL 1.56 and Miri's WM6.5 Rom that I have on the phone alone and see how it goes.
I know this is not a complete answer and I don't know if just re-Hard SPL'ng will work but it is worth a shot. Again, I downgraded first 1.14, screwed up the phone the went back to 1.56 and the camera started working again. At least I know that it is probably not a hardware issue as I have no where to send it back to for repair. All is well in Wisconsin for the time being.
Click to expand...
Click to collapse
hello there ,
1.14 radio is the problem ,
try to flash new one which is 1.16 in same form
http://forum.xda-developers.com/showthread.php?t=529031
or try to get into 6.1 and then Hard Rest with out Upgrade to dutty ,
seems problem in driver...
best regards
I havent had 1.14 on my phone since the day after I got it...
I am not very good at step by step instructions but you have obviously done a lot of flashing already, I will keep it short. Again, this started out as a botched attempt to downgrade my Rom to an older WM 6.1 Rom using the old 1.14 Hard SPL. You might not want to do this as it will temporarily screw up your phone. If you do, here are the steps I took. Really not too involved. Please read all steps first.
1. I synced my phone and downloaded the older 1.14 Hard SPL and flashed it.
link
2. That screwed up my phone "Aweful Greenscreen effect" and was not able use activesync anymore for flashing. I then put the phone into bootloader mode by powering off the phone. Hold in top power button until it asks if you want to power down. Yes. Then when you power up hold the volume down key and the power button at the same time. Make sure your USB cable it still plugged in. Your phone should now be in bootloader mode.
3. I downloaded the most current Hard SPL 1.56 and ran the HSPL Wrapper Blackstone 156OliNex
4. After that the Green Screen problem was gone and when I checked my camera it worked. I took a couple of photos and no problem. I opened it first with the WM Camera Program button then with the Manilla tab. When I used the Manilla tab it had to map the camera/videocamera button as we as find the photo album. After that it has showed up in Manilla normally every time I go back to it. Again, we will see how long this takes.
Thanks for the info on possibly being able to return the device for warranty reasons to HTC.
Hopefully this helps and my links work.
if you don't mind me asking, what dutty rom did you install because this all started for me when I insalled duttys 4.1 WM6.1 rom
Update
When I said I took the phone all the way back to stock, it wasnt 100% true. I loaded a stock HTC rom not a telstra rom.
with that being said, today I got the RMA # from HTC to have the phone repaired so I downloaded the newest updated Telstra Rom and loaded it onto the phone.By the way, My phone did not have the newest Telstra rom on it ever! When the phone was done, I started to prepair to load the newest stock SPL to go along with the rom when I notice the camera works..... What the hell?!?! I try loading a custom rom on it (miris 6.5 rom), camera still works! Hard reset the phone, camera still works. I don't know what this means but my phone is back on line with all features!
Thanks for everyones help and input
Keep your eye on it. It is almost like it slowly looses the connection to the camera and then has a hard time remaking the connection once it is lost. Then you have to do something drastic to get it back. I wouldn't mind so much if it only happened every three or four months but so far I have not been able to keep the camera going past two weeks without loosing it again. Keep me posted if yours goes out again.
Well that didn't take long. Camera is dead again. Going back to WM 6.1 and SPL 1.14 to see if that makes a difference. "unable to initialize" then camera and album disappears from TF3D.
What I ended up doing ( and I did it more then once cuz I tried to load a wm6.5 rom on it) was as fallows
starting with many different wm 6.5 roms, radio: 1.13.25.24 and HSPL 1.56
step 1: I flashed the newest telstra rom (Telstra_WWE_1.59.841.6_Radio_52.64.25.34_1.14.25.24)+
step 2: hard reset
step 3: flashed this custom 6.1 rom (gave up on trying to find a 6.5 rom that worked), L26 ultimate V3.55
step 4: hard reset
step 5: synced to my PC
step 6: loaded all my cabs (soft resetting after every 2 or 3)
Now Miris 6.5 V26 came close to working but when I would sync via PC or Microsoft My Phone it the camera bug would come back.
I am at about 18 hours without the bug. I have soft reset, changed the battery, synced the phone to my PC, called, received calls and text so far...
Since I HSPL and started flashing my phone will get muted automatically after making 1 call ie on my second call the other party will not be able to hear me whereas I am still able to hear the other party. However when I received calls there is no such problem ie.the other party is able to hear me and the phone is performing normally. It only happens when I make the 2nd call onwards.
After soft resets or reflash to other roms or stock rom 1.66.707.1 the same thing recur.
I have to overcome it when I make the 2nd and subsequent calls by pressing the mute icon twice. I do not have this problem with the original rom 148. when I bought the phone
Any assistance from anyone to overcome this problem will be very much appreciated
Might be a radio issue. Which one are you running now?
mazzarin said:
Might be a radio issue. Which one are you running now?
Click to expand...
Click to collapse
My original stock rom 148. with the original radio the phone had no problem.
I started having this problem with radio rom 2.06.51.07
I shall take your advise and maybe flash the radio to radio rom 2.07.50.27_2 and then see as to whether the problem still remain or is overcome..Thank You for your advise
After flashing to radio 2.07.50.27.2 it is still the same situation ie the same problem with the phone as mentioneded above
still the same auto mute issue
Recently I flashed to Miri V3.2 Build 5.2.23529 with radio 2.07.50.27_2 and the same proble existed.
I had hard reset and still had the same problem.
Any idea anyone to overcome this problem would be much appreciated....thanks
Not Rom issue
Recently I flashed Miri V7 and after flashing no issue.
However upon restoring through spb rom upgrade rstore( unticking overwriting files) the same issue recurs again. other than this issue which is personal only to me Miri rom V7 is smooth fast and snappy.
Found the solution to muting problem
Initially I thought is the radio problem
Then I thought it is the software programs problem
Next I thought it is due to the custom rom.
Finally I found the problem is due to "activating the auto recording phone" in resco audio recorder V4.62.
Deactivate it and the MUTE problem is gone
Hello all o/
I recently installed EnergyROM on HD2 in order to get some enhancements in interface, and everything works perfect, except that sometimes my HD2 blocks any kind of input, and it happens totally randomly. Left 3/4 of my touchscreen wont respond, so basically only part of screen that reponds to touch is right 1/4. I beleive this is not software problem, as it blocks exactly when I use dialer to call someone (+ blocks that happen randomlly). Phone usually unblocks by itself after 5-10 mins or after soft reset.
I have tried installing different version of NRG ROMs, tried even flashing back to original HTC rom, still same problem. So I though "it may be radio rom thats causing this?", so tried installing different versions of radio ROM aswell, but it didnt helped.
I have HSPL 2.08 and I am flashing in this order:
1. Flash with Task29
2. Flash ROM
3. Hard reset
4. Boot
Did anyone experienced similar problems, and if so, is there solution for this ?
Thanks in advance!
I've flashed my HD2 and it just crashes when it receives or makes a call, you cannot hear the other person at all, its just silent... I need to pull the battery out or use the reset button to reset it.
I flashed using the Energy ROM 23138 and also tried 21916 but both crash.
Could it be something to do with the radio? I can send and receive SMS's fine... I tried flashing using the 2.07.50 radio but all it seemed to do was hard reset the ROM.
The phone was a Telstra branded phone bought out right, I'm not with Telstra, I'm with 3 if this makes a difference..
Any help is appreciated, its very frustrating having a phone that can't be used as a phone.
Just thought I'd update;
It was the radio, I found that in the software info the radio was still the wrong version even after I tried updating it..
Flashed it a 2nd time and it worked, no more crashes and all is fixed.
Hello everyone! That's my first thread.. (I'm Italian, sorry for my English)
Some month ago I've flashed a new radio. When the Touch HD restarted the wifi stopped to work properly. It can connect only if I put the Touch HD very close to the wifi router. If it is farther then some cm it doesn't connect.
I've already tried to flash another radio as another ROM, but still doesn't work..
Any solution?
1. after a radio rom flash, you should perform a hard reset, because otherwise pre-existing connections (saved wi-fi networks, bluetooth pairings) might not work anymore after the upgrade
2. if you have troubles with the signal strength, you can set wi-fi to max. performance instead of battery saving, depending on your OS rom the way to those settings might vary.
I've done the hard reset and set the wifi to max, but signal strength still very low..and still unable to connect to the network..
if you revert back to the radio rom/ OS rom combination you had before (when it still worked), it should work again. if it doesn't, do the full routine, flash back a stock rom, then your spl, rom and radio again, in combination with task 29, it must be the exact same state as before. otherwise, there is only one reason: a hardware defect, maybe the antenna cable of the wifi card got unplugged or there might be something actually broken. but given the exact timing of the events, a software reason is far more likely.
i also having this same problem too and i did flashed back to my stock rom and it still the same once i thought is my wifi faulty but when i try Android porting my wifi work flawlessly now i cant go back to wm. just wonder what has happen
Chef_Tony said:
if you revert back to the radio rom/ OS rom combination you had before (when it still worked), it should work again. if it doesn't, do the full routine, flash back a stock rom, then your spl, rom and radio again, in combination with task 29, it must be the exact same state as before. otherwise, there is only one reason: a hardware defect, maybe the antenna cable of the wifi card got unplugged or there might be something actually broken. but given the exact timing of the events, a software reason is far more likely.
Click to expand...
Click to collapse