Hi,
I've been trying to use CM6 and CM7 but with both versions I run into Bluetooth pairing issues. The main problem is seen when trying to pair from my phone to my car. I get asked to enter a pin (that has been displayed by the car), but only get a few seconds to do so before I get an error message displayed. I've tried various kernels (same problem), and I'm using the latest radio rom. Things seem to be fine with stock 2.1 and with wildpuzzle. When flashing the roms I'be made sure I clear the cache, the dalvik cache and reset to default. Is there anything else I can try?
Thanks
Andy
Hi Andy,
Did you ever get a fix for this? I am having a similar issue, however my device does not give me a prompt at all for the bluetooth passkey.
Thanks,
Jessica
Use bluetooth file transfer from market. It works
Didn't work for me, still looking for a way round this.
Related
Hello,
I was using multiple ROMs with RADIOs 2.05 and 2.08 and everywhere was this problem - when I calling to someone and press End Call (HW or SW button), phone doesn't end calling, only button get grayed, but it is still ringing.
Please, do you know what could help? Thank you.
bluetooth?
the only time I get this is when it connects to my in car bluetooth it never disconnects the call properly any rom!
DJGurth said:
the only time I get this is when it connects to my in car bluetooth it never disconnects the call properly any rom!
Click to expand...
Click to collapse
i get that issue sometimes as well.. i found it worked ok after i made sure the in car bluetooth was automatically allowed to connect to anything it needs.. followed by a soft reset.. should only be the once though
Ok this is interesting. I had never had this problem but now I have flashed to Flashmores latest and the ROM is great and fast (and yes I did hard reset after flashing) but now I have this problem.
When I'm in a call none of the touch keys work. Cant access the keypad or anything. Really annoying.
I have to use the hard key to kill the call.
Any thoughts?
Oh and I dont have a bluetooth headset!
GG
It's independent on Bluetooth and same problem is with hardware- and software- keys (buttons).
I have the same problem...Which ROM versions do you have? mine problems started after flashing ROMs from TMOUS...so versions 1.7 to 2.10...I will revert back to older ROMs...
I think this problem was also in stock ROM about 1.42..
Hi guys,
For those problems, I advice you to do these steps in order whenever you want to flash a ROM (stock,shipped,cooked ROM). If you want the stable ROM for daily usage... just flash the shipped ROM
-Choose Clear Storage in you current ROM.
-Take out your SD card and Format it by (FAT32)
-Connect your Device to PC and do a MTTY... You can read this for more details (do it in careful way)
-Then Flash the Shipped ROM 1.66 I suggest the 1.66.405.2 WWE.
-Do not hard reset after flash... I mean let your device through the "Customization" first then just skip all setting and Reset the device. While the device is getting reboot... Do a hard reset
-Setting up all things.
Hope this help
it doesn`t work I think this problem is according to radio ROM. I will flash another...
i had this problem yesterday and have fixed it
ceratin roms are only compatible with certain radios
for example yesterday i installed SONE 2.5 and i couldnt make calls, it would freeze
i looked at the ROM requirements and i was using a radio not supported by the ROM
simply change the radio respectively to the ROM
This problem, which I'm describing, is something other. RADIO patch is okay (I think), but phone is "slow" during phonecall and phonecall cannot be hanged out..
Hi folks,
I tried out the MIUI ROM and liked it, but for various reasons, I wanted to go back to CMod again. So, I restored my NAND backup of my CM6 install. When I did this, I noticed that Bluetooth was no longer working correctly, i.e. it would pair successfully with my radio, but it failed to connect to it.
When I restored my MIUI backup, bluetooth worked again.
I cleared every cache known to man and once more returned to my CM backup, but once again my Bluetooth failed to work.
In the end, the only thing that seemed to fix the problem was wipe all the settings (again) and flash the latest CM nightlies (very nice btw!). After this, all was well.
I am attaching a logcat file if anybody is interested in the Bluetooth output. My totally uniformed suspicion is that it had something to do with the way MIUI uses the Bluetooth stack to get the radio working, but I'm sure somebody out there knows better than I do.
I am writing on this thread as i still cannot add to the development thread yet
I am using Elelinux-7.0.0-Hero-v2.0. Thanks Ele for a great rom.
So far the only problem i have had is once the unlock screen went invisible on me.
I had to use the patch which worked fine. no black screen. everything else works great so far.
Just trying to contribute to the developers what i can to help.
Any one else has any issue yet.
Elelinux-7.0.0-Hero-v2.0
RADIO VERSION:63.18.55.06SU_6.35.17.03
Kernel: Herokernel-12a
I've had the same issue with the lockscreen but like yourself it was a once off.
Generally the ROM is great (however, this is the first ROM that I've flashed to my hero)
The only other issue im getting is with linking facebook with my contacts; for some reason FB keeps crashing. But keep in mind that I'm a retard in comparison to what you lads know about custom roms etc..... but slowly learning!
Sent from my Hero using XDA App
same problems
I have had the same problems as you. lock screen went invisible a couple of times. and my facebook does not work quite right.
Apart from that has been very stable. no problems or reboots. works great.
Running gingerbread with honeycomb theme on my hero. running at 691mhz is well good.
I have got widgets running on every screen to.
Elelinux RC4 version 7.0 V2.0
kernel 12a
691mhz
clockworkmod.
Thanks Ele for a great rom
After installed 2.0 patch, I still get blank screen (wall paper ok, no any widgets).
The only way to solve is restart
Any thing wrong with my installation? (same spec as above post)
The Bug seems to affect some phones and not others. Might be due to different hardware but not sure.
I am a network engineer. Not a developer.
There is a patch that fixes the black screen bug which might help. You might have to delete dalvik cache first though. But as said not a developer.
I just wanted to try some different roms and loaded cronos rom yesterday and is very good. So running that at the moment.
It is really fast and stable. The fastest i have used so far. But i have not tested everything yet like GPS. But admit i am becoming a cronos fan.
Cheers.
P.s i always backup my phone first and do a complete wipe before trying a new rom. Otherwise could get problems.
I use clockwork mod.
Unfortunately the bug your getting with black screens, invisible menus etc.. is an aosp bug that affects some devices which Google are unable to fix, if you had read through the thread you would have seen this. Ele is working hard on a fix for this but as CM no longer support the hero, its unlikely many cm7 roms will see many updates.
Sent from my HTC Hero using XDA App
Everyone is hoping that Google will fix the memleak and invisible manus problem. To fix it, one needs to undersatand the big picture on how these things are managed. I think it can be done only by experienced coder.
It's a real shame. i love gingerbread and did not want to go back to 2.1 or 2.2.
But might have to if they do not fix it.
I know Ele is working hard on a fix. using his rom at the moment. Was using cronos. But suddenly started getting random reboots and battery started only lasting a few hours and could not find out why.
Thanks to all devs and help.
Elelinux 7.0 v2.1 GPS reboot issue
Hi all,
I found Elelinux 7.0 v2.1 to be almost perfect.
The only major issue so far for me is that when running applications such as sportstracker that use GPS and are running in the background, that as soon as the GPS connection is lost (for whatever reason) the phone always seems to crash.
I wonder whether anyone else has seen this issue and whether there's a way to investigate it.
E.g. is it possible ot redirect logcat to the sdcard and then analyze the log file?
Regards,
MJ
Her0 V2.1 - USB problem
This is a weird one...
I flashed to Elelinux 's fab 2.1 the usual way....
I booted into the ClockworkMod Recovery V2.5.0.7
-- wipe cache partition
-- Advanced - Wipe Dalvik Cache
-- reboot
Then again within Clockwork Recovery I choose 'Install zip from sdcard'
I select the Hero rom and it flashes perfectly...
Now the problem ----> I cant get the usb port working to enable transfer of files?
When the phone boots up it shows 'preparing sd card'
Then when i connect usb lead to pc it shows 'usb connected'
When i then pull the screen down, i see 'usb connected - select to copy files to/from your computer'
When i select that tab, it just crashes back to the home page?
I see the icon at the top of the screen but when i pull down the screen and select as above, it crashes back to home screen again?
In settings, i have both USB debugging and USB debugging notify - all enabled.
Can anyone provide a solution to this issue for me..
thank you
The only way around this problem i think is to mount usb storage from recovery.
Sent from my HTC Hero using XDA App
Apologies for another GPS thread but i have tried all suggestions in popular threads using methods such as faster fix and GPS status's A-GPS tools and the method posted in "GPS CM7 fix".
Im currently running CM 7.02 (Stable) and radio 26.08.04.07_M3, which i was told had great overall performance including GPS. Ive tried using different ROM's and different radios but had no luck in finding a secure GPS lock. Recently i have been unable to even find even a single satellite using GPS test or GPS Status.
Before rooting and flashing new ROM's i used to get a fairly consistent GPS lock but even returning to the default HTC Sense ROM now does not return the GPS to working order. I also used to get a lock when i first flashed CM but since flashing various radios and ROM's ive been unable to get GPS working properly and I think this is partly to blame.
Ive done a fresh wipe and wiped dalvik cache but this has also not helped. Any suggestions or full methods on how to restore GPS would be greatly appreciated. Thanks.
If you've tried every suggestion and tried the radio / Kernel recommended for your ROM by the ROM Creator then you may have to consider it being a hardware fault.
Sent using witchcraft via XDA Developers App.
Im hoping this isn't the case but perhaps you be may right. The only reason im hopeful of a software fix is that i have had sporadic cases of GPS working using different ROM's in the past and theres no sign of external or damage to the phone in any other way.
Would there be a way to test it if a hardware fault was the cause of the problems?
It won't be hardware issue I have the same problem, there is a file you can fladlsh that fixes it but I cannot find it
Im hoping thats the case, also does anyone have any experience with RIL's that work with CM7? im not sure if they may help with the problem as it does seem as if there could be a problem lying between the radio and the ROM.
Is this file you mentioned anything to do with RIL's or is it a GPS log file flash or something along those lines?
I'm sure it was a .lib file, from the android revolution or leedroid thread agggges ago ill have q.look if I can find it
ok thanks, im assuming this could work with CM7 aswell then?
Yeh its the only way I could get GPS working on cm7, now I can't find it I have no GPS lol so I need it aswell
Ha, well let me know if you manage to find it. Do you know why this happens on CM7 and why not many people seem to know about it?
I think its something to do with drivers, some.peoples chips are different and the normal drivers aren't fully implemented
think i found it, just about to give it a whirl
http://forum.xda-developers.com/showpost.php?p=12208708&postcount=425
Ok then, so im guessing i just adb push the first file (gps.spade.so) and as im in Europe (UK) i flash the EU_GPS_HD.zip in recovery as a zip file?
yeh, just follow the instructions and it should work
Seems to have improved things, got 3 satellites in view but still no lock, il leave it to search for a while. Thanks
Try going into recovery and wiping cache and dalvik cache I got instant lock
Yep this seems to have worked, still abit inconsistent with the locks but i get about 5/6 satellites but not too accurate (60ft range). Can anyone recommend a Radio to work with CM 7.02 for GPS. Im on Orange UK if this alters things. Currently using 26.04.02.17_M2 but im sure there will be a more reliable one out there. Thanks.
Hey guys,
I have a Galaxy S4 (i9500). I installed Omega ROM v22 on it and everything went smoothly, Wifi & BT working perfectly.
After a few hours of using the device (nothing special at all, texts and stuff like that) - I noticed my wifi isn't working and by not working I mean that I click the wi-fi button and it changes from gray to the mid-state between gray to green for around 20 seconds before it goes back to green ago.
If I open the menu to see my networks it just says "Enabling" without any networks there.
I had to drive somewhere so I went to my car and tried to enable Bluetooth, and same thing happens there - Bluetooth will not turn on and will stay stuck on mid-state between gray and green for a while and go back to green.
I flashed omega rom v22 again and the problem was gone, or so I thought. I went back to the car for another drive and realized the bluetooth issue is back - and when I got home I realized the wifi issue is back as well.
I figured I need to reset everything so I tried the following:
Full wipe (including dalvik and even including "internal SD card") and then flashing stock rom (from the official website, stock rom of my country).
The issue was back after a few hours. I do not have BT or Wifi access. Yesterday Wifi suddenly started working for a few hours but then it stopped working again.
I really need help! I have no idea what to do with this issue!
Well rule number one when you have problems after flashing without wipe.
1. perform a full wipe and see if the problem persists.
Lennyz1988 said:
Well rule number one when you have problems after flashing without wipe.
1. perform a full wipe and see if the problem persists.
Click to expand...
Click to collapse
Tried that, no luck.
What else would you try?
In some places when people had problems with Wi-Fi they said to flash a different kernel but I don't see why I would have this specific issue with Omega Rom and why the default kernel with it wont work well?
Maybe this could be a root issue? My root works fine but I have this weird gut feeling like this is some permissions thing that's going on.
I'm trying to think why it would work right after the wipe but then stop working shortly after.
Another symptom: It randomly started working for a few minutes and then stopped again (around three hours ago).
Any idea what's going on?
Well, if you fully wiped and didn't restore any apps and settings then it can be two other things.
Or it's a bug in the rom or a hardware failure in your phone.
I would suggest trying a different rom first. Do not restore anything, not even your google account.
wi-fi fix?
Do you actually have an i9505? or is it a canadian or att version? if its the latter sometimes the devs offer some wifi-fixes, also try a different kernel. otherwise it could be that your radio/modem are not compatible with the version of the ROM you are flashing.
Tried arrow ROM and this issue doesn't seem to happen in this rom. Hope it stays like that...
morhsn said:
Tried arrow ROM and this issue doesn't seem to happen in this rom. Hope it stays like that...
Click to expand...
Click to collapse
Sadly, it did happen with this rom, after just a few hours.
I'm now using stock rom and still suffering from the issue.
Does anyone have ANY idea what I can do to fix this?
Thanks in advance!