Database Users

HELP! BT headset stuck on BTAudio!

Ok here is what I did.
Installed one of the Touch ITs on my wing, then after some time installed BTAudio to stream music then I decided to update to the new IT Touch but left the BTAudio on. After flashing my phone without installing BTAudio it still acts as if it was still installed. everything streams right through and can't turn it off.
Steps I've taken so far:
re-installed BTAudio and turned it off and re-flashed and still the same thing.
Installed BT Audio tuggle, no luck. Any ideas??
I have a T-mobile with PDAVIET installed and Samsung WEP200 headset.

Do you have PDAVIET or TouchIT? Have you tried flashing back to the older version? It might be a "feature" or a bug of that version you're using. Also, please post this in the TouchIT thread that it refers to. That way you can get better help and it avoids clutter. Thank you.

I haven't tried using the older version that might have caused this to happen. I currently am using PDAVIET, reinstalled BTAUDIO v 1.0 to undo what it did and no luck. I'm going to reflash to the older version where it all started and see what happens. Reply back soon.

Is there a program that would change the PTT (Push-to-talk) on my bluetooth headset??

problem with wm6

i installed wm6 the other day on my spvc500 and everything went well.
the phone started, but when i gave it a restart, it just wouldnt connect to my network...
it stays in NO service state and does nothing...
i really dont know what to do...please, help me...
i'm freakin for not knowing what to do....

WM6 problem & SPVC 500
HI,
I had the same problem and I know explanations.
Problem is in software which you installed after flashing WM6 to your SPV.
When you installing software everything is working on 100% ,but after restaring mobile
phone starting very long time ,doesn't have signal and time on main screen.
You have only one option ,re-flash WM6 again ![/COLOR]
Uninstall software hasn't influence!!!
be carefully with installation new software, I don't know where is problem exactly >
Here is list of software which is working without problems on my phone:
Extreme agenda 3.02
Smart explorer 2.1.4.553
SP Task Manager 2.1.1.315
Slovo ED
Adobe reader
Don't install :
profile switcher
cele task
If you are using different software you have only one way how to find "good" and "wrong" software.
After reflashing WM6 install only one program and restart the phone if everything will be working program is OK.
But if no you have to reflash WM6 again !!!
Be careful, all your data will be lost.

I got the same problem, after installing some software i got no network anymore.
Also the menue did not respond anymore on pressing 'Start'-button
I had to flash my Amadeus again, because also a hard-reset didn't help.
Now i think i have installed all the software again and it works still well
edit: 10 minutes after i rebooted my amadeus and BANG, nothing works anymore.
Crap.
I think the problem is 'facade', a tool to show a schedule on the homescreen.

it all works now
well, i managed to solve my problem...
the thing was to flash this WM6 and now everything works jut fine...
i can finally say that i am pleased with my c500!

Before I try this Version of WM6: Do you use Facade?
I flashed my Amadeus with WM5, installed Facade, rebooted and nothing worked. After that I flashed WM 6, did not install Facade and everything is ok

I got the same problem, but after hard reset everything was ok, so reflashing WM6 was not necessary.

Stuck in phonecall

Hello,
I was using multiple ROMs with RADIOs 2.05 and 2.08 and everywhere was this problem - when I calling to someone and press End Call (HW or SW button), phone doesn't end calling, only button get grayed, but it is still ringing.
Please, do you know what could help? Thank you.

bluetooth?
the only time I get this is when it connects to my in car bluetooth it never disconnects the call properly any rom!

DJGurth said:
the only time I get this is when it connects to my in car bluetooth it never disconnects the call properly any rom!
Click to expand...
Click to collapse
i get that issue sometimes as well.. i found it worked ok after i made sure the in car bluetooth was automatically allowed to connect to anything it needs.. followed by a soft reset.. should only be the once though

Ok this is interesting. I had never had this problem but now I have flashed to Flashmores latest and the ROM is great and fast (and yes I did hard reset after flashing) but now I have this problem.
When I'm in a call none of the touch keys work. Cant access the keypad or anything. Really annoying.
I have to use the hard key to kill the call.
Any thoughts?
Oh and I dont have a bluetooth headset!
GG

It's independent on Bluetooth and same problem is with hardware- and software- keys (buttons).

I have the same problem...Which ROM versions do you have? mine problems started after flashing ROMs from TMOUS...so versions 1.7 to 2.10...I will revert back to older ROMs...

I think this problem was also in stock ROM about 1.42..

Hi guys,
For those problems, I advice you to do these steps in order whenever you want to flash a ROM (stock,shipped,cooked ROM). If you want the stable ROM for daily usage... just flash the shipped ROM
-Choose Clear Storage in you current ROM.
-Take out your SD card and Format it by (FAT32)
-Connect your Device to PC and do a MTTY... You can read this for more details (do it in careful way)
-Then Flash the Shipped ROM 1.66 I suggest the 1.66.405.2 WWE.
-Do not hard reset after flash... I mean let your device through the "Customization" first then just skip all setting and Reset the device. While the device is getting reboot... Do a hard reset
-Setting up all things.
Hope this help

it doesn`t work I think this problem is according to radio ROM. I will flash another...

i had this problem yesterday and have fixed it
ceratin roms are only compatible with certain radios
for example yesterday i installed SONE 2.5 and i couldnt make calls, it would freeze
i looked at the ROM requirements and i was using a radio not supported by the ROM
simply change the radio respectively to the ROM

This problem, which I'm describing, is something other. RADIO patch is okay (I think), but phone is "slow" during phonecall and phonecall cannot be hanged out..

[Q] Audio stops working on all Android build.

Hello all,
I'm having a major issue with my HD2. It was working perfectly before, until I copied another Android build to the SD card and tested it. Seemed to work fine at first but then I noticed that sound stopped working.
So here's the problem. Audio will work perfectly when running WM (I'm using VBN's RC3 ROM). Music plays fine, and everything else. But when I load up ANY Android build, sound will work for a minute or too, then suddenly disappears.
I've tried everything:
- Format SD multiple times
- Reinstall different Android builds.
- Reflash HSPL/Radio (downgraded to 2.10 from 2.14 as well)/WM Rom.
Still the same. I'm out of ideas :/ Any one?
Thanks.

Had that issue. When it starts, either no sound or after first click, sound disappears.. Calls no audio, games no audio.
I flashed ChuckyDroid, Artemis 33, OzDroid solved the problem for me.
Keep us posted.
Itaintrite said:
Hello all,
I'm having a major issue with my HD2. It was working perfectly before, until I copied another Android build to the SD card and tested it. Seemed to work fine at first but then I noticed that sound stopped working.
So here's the problem. Audio will work perfectly when running WM (I'm using VBN's RC3 ROM). Music plays fine, and everything else. But when I load up ANY Android build, sound will work for a minute or too, then suddenly disappears.
I've tried everything:
- Format SD multiple times
- Reinstall different Android builds.
- Reflash HSPL/Radio (downgraded to 2.10 from 2.14 as well)/WM Rom.
Still the same. I'm out of ideas :/ Any one?
Thanks.
Click to expand...
Click to collapse

You know what.. I haven't tried using a different WM base ROM since I had no problem using VBN till today. Will give it a shot. Thanks for the reminder. Currently trying a new SD card.

Just tried flashing to OZDroid 6.5.5 then to HyperDroid 1.6. I thought it worked.. until I opened voicemail. When I held the phone next to my ear, it vibrated... does that mean anything? Could this be a problem with the proximity sensor? But everything works perfectly on WM though >.<

Ok, I THINK I managed to fix it. Flashed back to stock then to ChuckyRom. And I formatted the SD card with a card reader instead of doing it through the phone this time. Wonder if that made any difference. Also using a different Android build as well. All seems good. Now... time for the final test. HyperDroid!

in case anyone else has the same issue I can confirm that the sound dropping out is due the WM rom installed and not the android rom. I changed over to the VBNdroid wm roms and the problem stopped ... until then i was pulling my hair out ..

Rooted SM-G928F Bluetooth is not turning on

Ok before i start:
I've rooted my phone
Custom rom installed (PureStock Extralite) but it wasn't working before i installed it anyway.
Wasn't working before i rooted but now i am rooted maybe there is something i can do.
Things i've tried:
wiping all sorts of caches.
Factory reset from recovery
installing custom rom
installing stock firmware
So basically whats happening is i cant turn on my bluetooth at all, from non-root and rooted. If i try from settings the slider greys but never turns on. Well im not really at my last resort but i have been ****ing around with my root and stuff so im just holding on its something about that.

i have the same problem
i've tried many ways,even delete-rebilb efs or erase nand-all from odin
i ve come to conclusion that there is hardware problem and leave it that way(i dont realy need bt)
strage thing:i really like plaiing with my phone and test many roms on it so after try to instal bobcatrom rom(https://forum.xda-developers.com/s6...-bobcatromv-1-0-lollipop-5-1-1-t3250089)after many
officials and custom and about 8 months without bt, myphone stuck becouse ive forgot to anable OEM unlock in dev.option so i instal the first nougat for s6edge+ and after the boot i realize that BLUETOOTH ITS WORKING again
i test it ,it connects and working fine for aboute 1hour.then i turn it off(becouse i dont need it)and thats it:it never turns on again...the same problem as before...

evris said:
i have the same problem
i've tried many ways,even delete-rebilb efs or erase nand-all from odin
i ve come to conclusion that there is hardware problem and leave it that way(i dont realy need bt)
strage thing:i really like plaiing with my phone and test many roms on it so after try to instal bobcatrom rom(https://forum.xda-developers.com/s6...-bobcatromv-1-0-lollipop-5-1-1-t3250089)after many
officials and custom and about 8 months without bt, myphone stuck becouse ive forgot to anable OEM unlock in dev.option so i instal the first nougat for s6edge+ and after the boot i realize that BLUETOOTH ITS WORKING again
i test it ,it connects and working fine for aboute 1hour.then i turn it off(becouse i dont need it)and thats it:it never turns on again...the same problem as before...
Click to expand...
Click to collapse
yeah. i took out my sim card and rebooted and it started working again. Put back in and it stopped. Repeated but it stayed off