Hi Everyone !
I have an Atom Exec and am facing a very peculiar problem :
The earpeice of the phone randomly stops working... When I make a call, I cannot hear the other persons voice and he/she cannot hear me.
There is no voice in Windows Media Player also.
But the phone still rings. When I attach the headset that came with the phone, the voice comes through the headset and it works as if there is no problem in the phone. Whats more, I can get the speakers to work by turning on the Radio (without the headset attached) and turn on the speakers, then play Music !!
The earpeice refused to work for 2 days, then it automatically started working today for 10-12 hours and now stopped again.
I have upgraded myrom to O2's official rom upgrade but in vain.
Please advice.
THANKS A LOT to all people who read this and advice !!
Update... I turned on the error reporting module and it gives me an error : There was an error in "gwes.exe" ......
Phone in Radio Mode!! no speakers or mic working.
Some one suggested a Hard Reset or also pluggin and unplugging the Headset while keeping the Fm Radio Speakers on till it says the Headset is required for the radio to function. (it comes to normal now avoid using the headset!!
Tough this is not working for me!!
This problem occurred when I was listening to radio and I received a phone call. Then after I removed the headset speakers there was no sound from the speakers neither the mic worked.
My O2 XDA ATOM EXEC has gone in the Radio Mode. .i.e the speakers (both ear, above screen and the stereo speakers, bottom) and the mic are not working. the FM is on even without the headset and i can speak or receive the phone only via the wired 3.5mm jack Headset and mic.
The Stereo speakers are on only when i put the FM radio speaker on.
Some one suggested a Hard Reset or also pluggin and unplugging the Headset while keeping the Fm Radio Speakers on till it says the Headset is required for the radio to function. (it comes to normal now avoid using the headset!!
Please guide me to a solution; I even performed the Hard reset still the phone is in Radio mode.
Related
For some reason connecting any wired headset, even the original one does not enable the microphone on the headset. The mic on the phone is still active, so I put the phone in my pocket and no one can hear me..Can't seem to find any posts or info on the topic. Anybody have any ideas?
Thanks
Im a bit late but I have a similar problem: Wehn I pick up the phone by pressing the button on the headset the micro is not on. However when I dis- and reconnect the headset it suddenly does work. I use Farias final crossbow rom. What can be done to fix this problem?
Hi guys,
can somebody please help me with the following problem?
Out of nothing my T-Mobile MDA Vario stopped giving sound with out the headset connected. without any reason and the out of nothing it stops giving sound without the headset connected. this all happends after i installed tornado (a2dp) to get sound to my bluetooth headset. anyone knows whats gone wrong, i search the forums here but couldnt get no clear answers
I had a similar problem. No sound from the speakers at all, but through the headset it was fine. As if the speaker itself was dead. But it wasn't caused by any Bluetooth fault.
Effectively, the phone hadn't realised that the headset had been unplugged. To solve it I was told to rapidly pummel the headset jack with the headset plug. Somehow, after some time, the phone is jogged back into a working state.
then whats the point havina bluetooth headset if u have to carry ur handsfree to get ur fone ringing again normally aint there any better solutions to this
Can enyone tell me if it is possible and how??
I have a Parrot 3100 and works fine for calls but can't put it saying nothing that comes from TOMTOM.
I have a friend that one time he heard the tomtom on a head-set.
But only one time and never more.
He doesn't know how!
Can enyone help me?
seem to recall people saying it works if
gps is connected first and then headset
You need a bluetooth headset with AD2P proflie. The standard hards free profile will only route calls to the headset. That said, if you press the voice dial button on your headset when an instruction is being read out, you will hear it in the headset (once only) - probably what the friend experienced.
Hi. I use a piece of software with my standard bt handsfree.
Chartcross Bluetooth Audio Router
The sound quality isn't stunning, but it lets all sounds that usually come from the inbuilt speaker to go through the handsfree instead
Tryed Chartcross Bluetooth Audio Router on my Trinity WM6 using hands free car kit (Delta System)... When activated it switches off the car speakers (like when calls arrive) but sounds still are on the speaker of pda...
Do you thing it will be necessary a reg tweak?
THX
No idea sorry. I only got my Trinity 2 days ago. I was using a prophet before which worked fine with it. I'll let you know if i do find anything though
IN MY HAND-FREE car kit my tomtom turned off the radio and instructions in car speakers.
right now that doesn't happen.
Infortunately i've tried so many roms i don't know i used at that time, and how make car speakers work again. Any help?
Whenever i use the MW600 to anwer calls , ppl complain that when they say something they can hear themselves echoing what they said. Anyone with this headset has the same issue or know how to fix it?
Turn the volume down on it then.. Pretty simple fix.
thanx for the suggestion, but turning down volume when using it in car doesn't work, it seems that when you use headset the phones mic doesn't turn off so it picks up the car speakers and that's why people hear themselves echoing
The MW600 isn't made for Car Use... So the issue can be normal!
I've noticed that my MW600 doesn't always sync to Phone and Media audio, sometimes just to Media - which will probably mean that the Mic on the phone is still open, hence the problem you describe.
I've worked out that the way to avoid this is to connect to the phone the following way:
1) Enable Bluetooth on phone
2) Turn on MW600
3) Check in BT setting that both Phone and Media audio are connected and that the headphone symbol is displayed.
I find that if I turn on the MW then activate BT on the phone, they just don't connect properly...
I use mine in the car on a regular basis and find it superb, and have had no complaints
thanx for this tip I'm going to try it, I hope it fixes the echoing
Hello everyone, I run into a really weird problem on my Note 4 when receiving voice calls while using a bluetooth headset.
Summary:
If BT headset is not already connected before initiating or receiving a voice call, you have to press bluetooth button during the call to direct sound to phone and then back to the BT in order to get the mic on the headset to work.
More Details :
1. Incoming Voice call
2. While phone is ringing i turn on the bluetooth headset.
3. I answer the call(Either from phone or the headset)
4. I can hear the other party, but he doesn't hear me.
5. The bluetooth headset mic is not working, neither the phone's mic.
6. If i press the bluetooth icon on the phone(while in a voice call) to direct audio to phone, everything works fine.
7. If i press again to direct audio back to bluetooth headset, everything works fine.
8. If the headset is already connected to the phone before i receive the voice call everything works fine.
9. If i make a voice call (maybe cause headset is already connected?) everything works fine.
10. Problem doesn't occur if it's a VOIP call through skype viber etc.
10. Using plantronics Marque M165 & M55, I have unpaired both repaired, cleared bluetooth cache etc problem still there. Lollipop 5.0.1.
For me it's a big issue since if i have the phone in my bag/pocket i have to take it out in order to be able to use the headset, which kind of defeats the purpose.
Anyone facing this ? Any suggestions?
Sorry for the long post & thanks in advance !
Anyone?
Anyone with similar problems ? Any ideas or suggestions ???
Yes, I have a similar problem, but with my car's bluetooth (the only hands free I use). This problem started after I upgraded to Lollipop, and it worked fine in KitKat.
With te device connected to the car's bluetooth, I have to make the call in the phone's Speaker mode until the other party answers. Only then I can switch to bluetooth.
If I make the call in bluetooth mode, I won't hear the ringing through the car's speakers and even after the other party answers, we cannot communicate.
This is a serious bug. It is my 4th Samsung Galaxy phone, and the only one that doesn't work properly. My previous S4 worked perfectly and I regret profoundly having bought the Note 4.
Ironically i don't face the problem you have. Mine works fine with my car's BT but i suppose this happens because in my case the car's BT is already connected to the phone.
I suppose you have tried to repair the bluetooth/ cleared BT cache etc right ?
I've just tried the phone with a Samsung bluetooth and problem solved !....So it doesn't play well with the plantronic's BT , warning for potential buyers !