Hi guys,
can somebody please help me with the following problem?
Out of nothing my T-Mobile MDA Vario stopped giving sound with out the headset connected. without any reason and the out of nothing it stops giving sound without the headset connected. this all happends after i installed tornado (a2dp) to get sound to my bluetooth headset. anyone knows whats gone wrong, i search the forums here but couldnt get no clear answers
I had a similar problem. No sound from the speakers at all, but through the headset it was fine. As if the speaker itself was dead. But it wasn't caused by any Bluetooth fault.
Effectively, the phone hadn't realised that the headset had been unplugged. To solve it I was told to rapidly pummel the headset jack with the headset plug. Somehow, after some time, the phone is jogged back into a working state.
then whats the point havina bluetooth headset if u have to carry ur handsfree to get ur fone ringing again normally aint there any better solutions to this
Related
For some reason connecting any wired headset, even the original one does not enable the microphone on the headset. The mic on the phone is still active, so I put the phone in my pocket and no one can hear me..Can't seem to find any posts or info on the topic. Anybody have any ideas?
Thanks
Im a bit late but I have a similar problem: Wehn I pick up the phone by pressing the button on the headset the micro is not on. However when I dis- and reconnect the headset it suddenly does work. I use Farias final crossbow rom. What can be done to fix this problem?
Hi folks,
can anybody confirm this behavior ?
When I plug in my headset, my ameo still plays the ringtone from ist speakers on an incoming call (yes, the ringtone is also on the headset).
Is there an option i missed ?
Thanks for your help, best regards.
I find this extremly handy, when im driving I dont have the earphone in my ear all the time. It also does it with a bluetooth headset. im sorry I don't have the answer.
first off, i love al bundy
ok now that thats over.... what headset do you have, is it bluetooth or wired headset
Hi Everyone !
I have an Atom Exec and am facing a very peculiar problem :
The earpeice of the phone randomly stops working... When I make a call, I cannot hear the other persons voice and he/she cannot hear me.
There is no voice in Windows Media Player also.
But the phone still rings. When I attach the headset that came with the phone, the voice comes through the headset and it works as if there is no problem in the phone. Whats more, I can get the speakers to work by turning on the Radio (without the headset attached) and turn on the speakers, then play Music !!
The earpeice refused to work for 2 days, then it automatically started working today for 10-12 hours and now stopped again.
I have upgraded myrom to O2's official rom upgrade but in vain.
Please advice.
THANKS A LOT to all people who read this and advice !!
Update... I turned on the error reporting module and it gives me an error : There was an error in "gwes.exe" ......
Phone in Radio Mode!! no speakers or mic working.
Some one suggested a Hard Reset or also pluggin and unplugging the Headset while keeping the Fm Radio Speakers on till it says the Headset is required for the radio to function. (it comes to normal now avoid using the headset!!
Tough this is not working for me!!
This problem occurred when I was listening to radio and I received a phone call. Then after I removed the headset speakers there was no sound from the speakers neither the mic worked.
My O2 XDA ATOM EXEC has gone in the Radio Mode. .i.e the speakers (both ear, above screen and the stereo speakers, bottom) and the mic are not working. the FM is on even without the headset and i can speak or receive the phone only via the wired 3.5mm jack Headset and mic.
The Stereo speakers are on only when i put the FM radio speaker on.
Some one suggested a Hard Reset or also pluggin and unplugging the Headset while keeping the Fm Radio Speakers on till it says the Headset is required for the radio to function. (it comes to normal now avoid using the headset!!
Please guide me to a solution; I even performed the Hard reset still the phone is in Radio mode.
Hello everyone,
i have a little problem so i'll try to explain although my english is not so good...
I suppose everyone here notice that, when the headset is plugged, sounds are redirected in the earphone and are captured by the headset mic.
What i want to do is to disable this headset mic, that is to say, keep the phone mic active.
Does anyone have a little idea about this ? Thanks
No answer ?
Whenever i use the MW600 to anwer calls , ppl complain that when they say something they can hear themselves echoing what they said. Anyone with this headset has the same issue or know how to fix it?
Turn the volume down on it then.. Pretty simple fix.
thanx for the suggestion, but turning down volume when using it in car doesn't work, it seems that when you use headset the phones mic doesn't turn off so it picks up the car speakers and that's why people hear themselves echoing
The MW600 isn't made for Car Use... So the issue can be normal!
I've noticed that my MW600 doesn't always sync to Phone and Media audio, sometimes just to Media - which will probably mean that the Mic on the phone is still open, hence the problem you describe.
I've worked out that the way to avoid this is to connect to the phone the following way:
1) Enable Bluetooth on phone
2) Turn on MW600
3) Check in BT setting that both Phone and Media audio are connected and that the headphone symbol is displayed.
I find that if I turn on the MW then activate BT on the phone, they just don't connect properly...
I use mine in the car on a regular basis and find it superb, and have had no complaints
thanx for this tip I'm going to try it, I hope it fixes the echoing