Whenever i use the MW600 to anwer calls , ppl complain that when they say something they can hear themselves echoing what they said. Anyone with this headset has the same issue or know how to fix it?
Turn the volume down on it then.. Pretty simple fix.
thanx for the suggestion, but turning down volume when using it in car doesn't work, it seems that when you use headset the phones mic doesn't turn off so it picks up the car speakers and that's why people hear themselves echoing
The MW600 isn't made for Car Use... So the issue can be normal!
I've noticed that my MW600 doesn't always sync to Phone and Media audio, sometimes just to Media - which will probably mean that the Mic on the phone is still open, hence the problem you describe.
I've worked out that the way to avoid this is to connect to the phone the following way:
1) Enable Bluetooth on phone
2) Turn on MW600
3) Check in BT setting that both Phone and Media audio are connected and that the headphone symbol is displayed.
I find that if I turn on the MW then activate BT on the phone, they just don't connect properly...
I use mine in the car on a regular basis and find it superb, and have had no complaints
thanx for this tip I'm going to try it, I hope it fixes the echoing
Related
I have skype installed on my qtek 9000, and wanted to be able to use it from my bluetooth headset (Jabra 250). I started skype from the qtek screen, and of course could not get the bluetooth audio to stay on for more than a few seconds. The cyberon voice dialer keeps starting up, and as soon as it is through waiting for sound, it shuts down and so does the bluetooth headset audio. I happened to create a voice tag to start skype, and made a 100% repeatable discovery. If I start skype from the headset, I have continuous audio. Even if I shut skype down in memory, running programs, the audio continues in the jabra. If I start skype from the qtek screen, this does not happen. Once I have the continuous audio connection, a simple press of the headset button reverts all to normal. Hopefully there will be some information here to allow a hack of the audio gateway problem.
i just tried to reproduce this on my mda pro with jabra 800...it worked..actually it is my feeling it worked ecactly every other time.but this is ok too, if one knows it you can tell by the noise in the headset if its connected or not..amazing...what a useful information...great! thanks for posting...interesting no one else jumped on it yet...the question now is how to get an incoming call into the headset...
So you're saying you can listen to audio over the headset or something?
V
vj: thats exctly right...isn't that amazing? the moment you get the headset connected through bringing up skype with the voice tag, the headset stays connected until you disconnect it again by pressing the appropriate button on the headset..even if then you switch apps it stays on..you hear every system sound etc in the headset.obviously the sound is a noisy phone headset sound and sure has nothing to do with a2dp..but you hear...actually i just tried to do the trick with assigning a voice tag to media player...didn't work...but skype can initiate it and keeps it up...cool...
AndyME: give me a few mins and I'll show you a better trick... coming soon
V
you know what: i expected something like this from you when i saw that apparently you got nterested...lol...the good thing about this trick is: you do not have to restart the device to get into this mode..although i stll have not figured 100% out how to make it happen for sure...it kind of works sometimes and sometimes not...now i am curious to see what you are coming up with....lol...
Ok Andy, finally finished the webpage.
Please check it out here:
VJVolubilis
You basically want to try the -agon option. It should, I hope, transfer audio straight over to your headset. I hope.
V
Hi guys,
can somebody please help me with the following problem?
Out of nothing my T-Mobile MDA Vario stopped giving sound with out the headset connected. without any reason and the out of nothing it stops giving sound without the headset connected. this all happends after i installed tornado (a2dp) to get sound to my bluetooth headset. anyone knows whats gone wrong, i search the forums here but couldnt get no clear answers
I had a similar problem. No sound from the speakers at all, but through the headset it was fine. As if the speaker itself was dead. But it wasn't caused by any Bluetooth fault.
Effectively, the phone hadn't realised that the headset had been unplugged. To solve it I was told to rapidly pummel the headset jack with the headset plug. Somehow, after some time, the phone is jogged back into a working state.
then whats the point havina bluetooth headset if u have to carry ur handsfree to get ur fone ringing again normally aint there any better solutions to this
Well, just got my TyTN II. For me it is worth the upgrade from the TyTN.
I have only one issue. My Jabra 320s headset is about 30% lower in recieving volume than it is on my TyTN I. On the original TyTN, the volume was just about right, any lower and it wouldn't be usable, but now that I am running it on the TyTN II it is un-usable at such a low volume.
My question is this?
Is this issue fixable through software/registry etc...
And does anyone have any idea how I can fix this?
JB
That's the big question, low BT headset volume when calling is a consistant issue with most headsets on Kaiser vs Hermes. Time to email HTC support, it's a bug.
lol no problems here. Using Plantronics Voyager 510SL.
Even if it's a bug with the Kaiser, (Probably software) we won't see any fix from HTC anytime soon. That's why I am asking the pros over here at XDA if there is a software/config workaround/fix that can be implemented.
JB
nuclear said:
lol no problems here. Using Plantronics Voyager 510SL.
Click to expand...
Click to collapse
ditto... while i'm not using the 510SL, i am using the 510 and it's quite loud with my Kaiser..
I found my problem and fixed it...
Ok, I'm an idiot... I fixed my bt headset issue with low recieving volume. Through my haste to try and fix the volume issue, I missed one key setting... I forgot to click on the small speaker icon on the top right of the screen and push the volume sliders to max.... Apparently, I only tried to use the jog wheel alone to raise volume and that works, but seems to work seperately from the volume icon levels.
So for me... I have the same volume levels I had as before with the TyTN I.
JB
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Buzz313th said:
Ok, I'm an idiot... I fixed my bt headset issue with low recieving volume. Through my haste to try and fix the volume issue, I missed one key setting... I forgot to click on the small speaker icon on the top right of the screen and push the volume sliders to max.... Apparently, I only tried to use the jog wheel alone to raise volume and that works, but seems to work seperately from the volume icon levels.
So for me... I have the same volume levels I had as before with the TyTN I.
JB
Click to expand...
Click to collapse
Sorry, this raises the volume in the BT headset for all "system" sounds like voice dial confirmation talkback to the headset, but the in-call volume remains lower than Hermes once you are connected, the slider has no effect. To be clear, if you adjust the slider while NO call is in progress, the volume in the headset will be affected, but after connection the sound volume remains low, no matter how you left the slider from before.
ronaldlokers said:
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Click to expand...
Click to collapse
Yes.. I had the same problem...
This may sound rediculous on how I fixed it, but it worked.
I paired my laptop and the Headset and then tried to listen to stereo music, and also paired the phone with the laptop and then it would pair correctly with the Jabra bt320s.
It seems to me that the kaiser has a few BT bugs that need to be worked out, and that different pairings will change either reg settings or configs that arent available to the UI...
JB
RemE said:
Sorry, this raises the volume in the BT headset for all "system" sounds like voice dial confirmation talkback to the headset, but the in-call volume remains lower than Hermes once you are connected, the slider has no effect. To be clear, if you adjust the slider while NO call is in progress, the volume in the headset will be affected, but after connection the sound volume remains low, no matter how you left the slider from before.
Click to expand...
Click to collapse
]
You are correct and I am still having low BT call volume, but at the time I was having low BT stereo volume as well. The sliders fixed the stereo problem, but didn't fix the BT call volume.
I haven't tried the fix yet, but I believe someone claims to have fixed the BT call volume with a cooked rom or a modified rom...
I'm not worried that we will have this fixed sometime soon.
JB
ronaldlokers said:
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Click to expand...
Click to collapse
I am using my Motorola HT820 BT headset without any issues since day one. I simply paired them, and made sure Stereo Headset was selected in the bluetooth options, and they just work. Volume and Track changes from the headset also work great. One thing I never liked about the HT820 was it's range, just about 20 ft. I used to have it paired with my laptop, but no longer since I have 4G of music on my phone....
how long does the kaiser battery last listening mp3 throught bluetooth headset?, anybody tried it?
will it drain battery MUCH faster than using included headset?
jspohn said:
I am using my Motorola HT820 BT headset without any issues since day one. I simply paired them, and made sure Stereo Headset was selected in the bluetooth options, and they just work. Volume and Track changes from the headset also work great. One thing I never liked about the HT820 was it's range, just about 20 ft. I used to have it paired with my laptop, but no longer since I have 4G of music on my phone....
Click to expand...
Click to collapse
I bought a plantronics pulsar 260 and that one works too. In the shop they told me that jabra has much problems with their bluetooth headsets!
pepeto2001 said:
how long does the kaiser battery last listening mp3 throught bluetooth headset?, anybody tried it?
will it drain battery MUCH faster than using included headset?
Click to expand...
Click to collapse
I don't really have any idea, since I charge it nightly. I normally leave the BT on all the time anyway.
Strange problem with handsfree mode
Hi guys,
I have just purchased the Jabra 320s and was happy with the stereo quality and apart from the low volume issue on handsfree calls were handled quite well through the device.
Once, When the phone rang, it was answered by my wife using the phone answer key instead of the Jabra's answer button and since then I cannot answer calls through the Jabra. I have tried the options on the Kaiser whilst on a call to have the call transfered to handsfree but that also does not work, I have tried resetting and re-paring both devices and it still does not work for calls on handsfree (once paired, I have the handsfree option and stereo selected). The stereo is however working fine without any problems when playing mp3's.
Any ideas?
HasC said:
Hi guys,
I have just purchased the Jabra 320s and was happy with the stereo quality and apart from the low volume issue on handsfree calls were handled quite well through the device.
Once, When the phone rang, it was answered by my wife using the phone answer key instead of the Jabra's answer button and since then I cannot answer calls through the Jabra. I have tried the options on the Kaiser whilst on a call to have the call transfered to handsfree but that also does not work, I have tried resetting and re-paring both devices and it still does not work for calls on handsfree (once paired, I have the handsfree option and stereo selected). The stereo is however working fine without any problems when playing mp3's.
Any ideas?
Click to expand...
Click to collapse
Did you solve this problem, I just bought the 320s and am experiencing the same issue?
I have now tried 3 different bluetooth headsets with my AT&T Tilt with Stock Rom. First was my BlueAnt V12 I used great with my RAZR then I bought a Motorola S705 now I have Sony HBH-DS980.
With the BlueAnt V12 the audio was low and tinny and couldn't hear the caller
The Motorola S705 sounded good minor choppiness but the callers couldn't hear me worth a damn. Both of these devices paired great and kept connection, only the Motorola would loose connection if I got a system alarm or if I was streaming music. For just handset operation it worked great. With the Sony it seems to be a crap shoot when they are going to work. I installed JetWare to enable Caller ID Name and Ringtone through headset and when I pair them the first time they work great all day long. However if I turn bluetooth off on the phone and then back on I have issues with disconnecting and sound not going through headset for calls.
So I installed the new Official AT&T Rom from HTC's Site the other day hoping the bluetooth improvements they made would help. I decided to try JetWare again just to see if it worked, again I started having problems again. So I hard reset and didn't install the JetWare Extensions. For the first day everything worked great. Next day I fired it up it's up to it's old tricks of disconnecting after a call.
Anyone else having these issues? My state is going to be bluetooth only while driving in about 4 months so I really need bluetooth to work.
Can you charge the sony ds980 via usb?
No it has a real strange plug for charging
Hi, I have the Sony Ds980. I've experienced similar problems in the past.
check your Bluetooth settings on the phone: communication manager --> Settings --> bluetooth. Select your device (ds-980) but don't double click on it. and then check its mode: in that window, ensure that you have checkmarks in both options (i.e, Turn on bluetooth & make sure this device is visible to other devices). Sometimes, when you restart your bluetooth headset, the second option is left unchecked, thus causing disconnections between it and the device.
another option is to trigger the headset button. sometimes, when a call comes in, I would have to do this once or twice before it connects.
I think it is a bug.
i have the Jetware extension and MSVoice, and they help with the caller ID.
HTH,
rgds, Manny
I'm trying to decided between the DS980 and the Moto S9.
I'm so tired of wasting my money on crap.
Thanks I'll have a look at those settings, I just wish JetWare uninstalled nicely
I have been running it lately without JetWare and the only issue I am having this way is the wireless stereo portion disconnects after each Incoming call it does not do this if I place a call.
With JetWare I can sometimes keep it connected no matter what the issue is it connects but when I place a test call it rings on the headset but when I answer the call it isn't comming in on the headset it is still on the phone although the call button works and ringing on the headset works. It got to be a pain to have to place a few test calls to make sure the headset was working.
dalavar said:
Thanks I'll have a look at those settings, I just wish JetWare uninstalled nicely
I have been running it lately without JetWare and the only issue I am having this way is the wireless stereo portion disconnects after each Incoming call it does not do this if I place a call.
With JetWare I can sometimes keep it connected no matter what the issue is it connects but when I place a test call it rings on the headset but when I answer the call it isn't comming in on the headset it is still on the phone although the call button works and ringing on the headset works. It got to be a pain to have to place a few test calls to make sure the headset was working.
Click to expand...
Click to collapse
Well, that does it for me. The DS980 is officially off my list.
I have a set of bluetooth earphones that are capable of both audio and hands-free, but I only want to use them for audio. This is easy, as you just untick the hands-free option when you pair them with the phone.
However, when I turn the earphones on the phone pops up a message saying "the device is trying to connect to use a hands-free headset or car kit with your phone". I then have the option to accept or reject this pairing. This happens every time I turn the earphones on, so it's getting quite annoying (especially since I turned off the hands-free option when I originally paired!)
I simply want to stop this message popping up, so I need to know if there's a way of making the phone automatically reject the request for the earphones to act as a hands-free kit.
I've been all through the bluetooth settings and didn't find anything, but I'll ask the question on here in the hope that someone else has some ideas.
Thanks
Hey john, can't help you on this one m8.
Just needed to comment on how strange it seems you asking the forum questions instead of everyone asking you, and you sorting out our problems.
Good look on your quest
Heh - cheers mate. I'll keep my fingers crossed.
Can't really help you but I can tell you what I have seen ...
I have a rocketfish BT headset ....
once it is paired and I authorize the connection, I can shut off either or and it does not ask me for the other, it will connect to the headset if I hit a "media" button on the headset though ...
I wonder if the device you are using is "Asking" to reconnect even though it is already paired ...
just my .02
watcher64 said:
Can't really help you but I can tell you what I have seen ...
I have a rocketfish BT headset ....
once it is paired and I authorize the connection, I can shut off either or and it does not ask me for the other, it will connect to the headset if I hit a "media" button on the headset though ...
I wonder if the device you are using is "Asking" to reconnect even though it is already paired ...
just my .02
Click to expand...
Click to collapse
It only asks me to accept or reject the hands-free connection - the audio connection just connects. I believe it is the earphones that are trying to connect as a headset, so I just need a way to tell the phone to automatically refuse that connection, just like it automatically accepts the audio one.
This is after I've turned off the earphones, and then turned them back on again, like the first time I've used them in a day. It's not during regular use.
Grrrr
I think this may have more to do with your particular headphones than the HD2. Meaning your headphones just don't quite match up with the HD2's wonky bluetooth implementation. I use a cheap bluetooth stereo receiver from DealExtreme. I don't know the model, but it shows up as BCK-08. It can pair as stereo audio or handsfree. I have it set to do both, and I never get a pop up like that. Can you do that, or do you specifically want to disable hands free?
PS. This title was funny. When I saw it on the main HD2 page it said Bluetooth - stop asking... I was sure that it was going to say stop asking how to control other media players, besides Sense, with a bluetooth headset. This still isn't possible right?