Related
Hi Guys
I've been reading this forum for two days now, and still haven't found the answer to my solution.
I used Olipros unlocker on Saturday, but after step 1 the screen went black and it wont reboot.
I can get into bootloader (by pressing the camera button and the reset pin at the same time), but I can't install the OS from Activesync as the PC can't see the ameo.
I can also get to factory reset (by pressing the volume slider down and powering up), but I haven't done anything in there.
The bootloader shows Olipro SPL 1.2
At the same time as getting this sorted I thought I'd upgrade to WM6 from the posts that are here, but I can't find at all, how to get the ROM onto the ameo without Activesync seeing it.
Can someone point me in the right direction please?
Thanks for any help in advance.
Joe
i have had the same problem.
i solve doing this :
1rst enter in bootloader mode ( Reset + camera button )
plug your USB cable
and flash WM5 or WM6 rom with flash utility
utilies doesn't trcognize your current rom etc but donc care about
then after flash 100% my athena (HTC advantage boot up normaly again)
i hope my experience help you
Hi, thanks for your advice:
Here's what I'm doing:
Bootloader (Camera and reset hole)
Bootloader shows ATHE100
SPL-v1.20. Olipro
USB
I'm then running mtty tool and can get a connection with:
Cmd>
I type Task 32 and it states Level=0
do I then use the lnbs command?
I'm sorry, I dont see what to do now
You state to upgrade ROM with flash utility, but whats the flash utility?
Is it Mtty?
Or another tool that I haven't got yet?
I have downloaded the ROM update tools, and within the rar files there are apps like, enterbootloader, ruugetinfo, rapitool, etc, but they wont run, they say that they aren't a valid win32 application
Sorry, I know my phones not knackered, just don't know how to get out of it.
Joe
run ROMUpdateutility.exe provided with WM5 rom update or WM6 rom update (if you don't have look at XDA ftps ...)
Thank you so much for your help, got WM6 running on it now, everything's v good.
Cheers
Joe
i'm happy you ameo up and alive
seosamh1973 said:
Hi Guys
I've been reading this forum for two days now, and still haven't found the answer to my solution.
I used Olipros unlocker on Saturday, but after step 1 the screen went black and it wont reboot.
I can get into bootloader (by pressing the camera button and the reset pin at the same time), but I can't install the OS from Activesync as the PC can't see the ameo.
I can also get to factory reset (by pressing the volume slider down and powering up), but I haven't done anything in there.
The bootloader shows Olipro SPL 1.2
At the same time as getting this sorted I thought I'd upgrade to WM6 from the posts that are here, but I can't find at all, how to get the ROM onto the ameo without Activesync seeing it.
Can someone point me in the right direction please?
Thanks for any help in advance.
Joe
Click to expand...
Click to collapse
Just out of curiosity, did you take your storage card out before you began the unlock?
not for me : no SD card , only microdrive
Nope, didn't realise I had to....
Is that the common factor in it failing?
Joe
seosamh1973 said:
Nope, didn't realise I had to....
Is that the common factor in it failing?
Joe
Click to expand...
Click to collapse
I don't think so, I don't have a memory card on my Ameo and had the same problem.. And when I told the Olipro **** that I got the black screen AND his SPL was flashed successfully, he kinda went frenzy about "IT IS NOT MY FAULT, IT IS YOURS! YOU ARE STUPID, I AM GOD!".. Nice support, huh?
Donate the mofo!
yes nice support indeed
TryOG said:
"IT IS NOT MY FAULT, IT IS YOURS! YOU ARE STUPID, I AM GOD!".. Nice support, huh?
Click to expand...
Click to collapse
I suggest people read the forum thread, I've been aware of the problem since day one after xmen's pda reset itself while running an unpatched SPL.
clearly you're a moron, or your english is ****, possibly both.
Olipro said:
I suggest people read the forum thread, I've been aware of the problem since day one after xmen's pda reset itself while running an unpatched SPL.
clearly you're a moron, or your english is ****, possibly both.
Click to expand...
Click to collapse
This guy refers to you...
Pantaloonie said:
I'm glad i'm not the only one who feels that way.
The man is obnoxious, arrogant and rude.
But hey - it's a public forum, he can say whatever he wants - as can I.
Click to expand...
Click to collapse
Just don't flame "stupid" people. And if someone asks for help: ignore, say that you won't help them or help them properly (without flaming).
Thnx.
And another thing.
You look *smart* and *cool* when you flame other people when they get problems and ask for help!!! (not)
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Olipro said:
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Click to expand...
Click to collapse
Thank you for this friendly answer... (I mean it)
Olipro said:
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Click to expand...
Click to collapse
Better,,, and sorta friendly.
What do you think about this little gem:
Pissed off == no reply @ the forums.
Cooled down == yeah, ok I can reply.
But then again, what do I know, eh?
Some people PAID you to hack/crack/mangle/otherwise play around with a Athena.
No, I didn't use any of your programs... I have had an unlocked Athena since day one. No, I will wait for the official Dopod release on the 20th (hopefully). If I see any bugs, HELL YES I will query the collective hive mind here.
But please, lay off the "I'm better than you" attitude. It doesn't do any good at all.
Olipro said:
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Click to expand...
Click to collapse
TryOG said:
Thank you for this friendly answer... (I mean it)
Click to expand...
Click to collapse
Alright guys! I do believe we can start all over, be nice & make progress! Let's try to enjoy our devices and appreciate each other.
Abram said:
Alright guys! I do believe we can start all over, be nice & make progress! Let's try to enjoy our devices and appreciate each other.
Click to expand...
Click to collapse
Yeah, let's bring the '70s back
TryOG said:
Yeah, let's bring the '70s back
Click to expand...
Click to collapse
70's ? you're a decade too late there...
fards said:
70's ? you're a decade too late there...
Click to expand...
Click to collapse
The 70's songs are less worse...
Hi,
I tired flashing udk syrius r0.
during the flash i got an error messege about the communication.
now my device is stuck in bootloader mode :
"pola100
spl-1.25.0000
cpld-2"
i am using vista ultimate.
i tired re-flashing 3 other roms but i can't because the device is not being recognized.
i tried using mtty but i keep getting "usb port can not open" no matter what i do. i tired uninstalling the mobile center and nothing helps.
i tried flashing through the microsd and its not working as well (its in "loading" for over 30 minutes.)
1. is my device bricked?
2. what do i need to do to get my device back ?
thanks in advance
Jam
That's happens because you don't read before, before flashing a non-Official ROM you need to install the Hard-SPL.
udK said:
That's happens because you don't read before, before flashing a non-Official ROM you need to install the Hard-SPL.
Click to expand...
Click to collapse
O.K. I'm a dumbass
how do I do that now?
or is my device bricked?
jamses said:
O.K. I'm a dumbass
how do I do that now?
or is my device bricked?
Click to expand...
Click to collapse
It is not bricked. You can repair it by yourself. Just use SEARCH function! Please do not ask questions that have been answered hundreds of times. It is really not polite to do that to people using these forums.
There are some sticked thread, take a look.
udK said:
There are some sticked thread, take a look.
Click to expand...
Click to collapse
Hi again,
i tried this threads...
http://forum.xda-developers.com/showthread.php?t=425922
http://forum.xda-developers.com/showthread.php?t=384084
http://forum.xda-developers.com/showthread.php?t=381600
nothing is working...
i am writing for help after i tried everything i can ...
please dont take this the wrong way but i need help recovering my device...
Just look the first sticky thread of polaris upgrading
JVRSilva said:
Just look the first sticky thread of polaris upgrading
Click to expand...
Click to collapse
i tried doing hard-spl flash but i can't see the "replug usb" message. the device immidietly moves to the progress bar and gets stuck with 0%.
can someone please help me...
try flashing an official rom
and after that flash hardspl
ravest said:
try flashing an official rom
and after that flash hardspl
Click to expand...
Click to collapse
wouldn't flashing an official rom after a custom rom brick my device ?
ravest said:
try flashing an official rom
and after that flash hardspl
Click to expand...
Click to collapse
That solved the problem !!!
YOU ARE A KING !!!
my phone after i install Big foot rom and use it for a month. this morning it just die. and i can on it. only at the 1st page. HTC with all the information. i tried hard reseting. didnt work. what can i do.
I had the same sort of problem my XDA orbit used to just drop out, we later found it had a faulty motherboard replaced phone no problems since
Wow ... bad news
Try to put it in bootloader mode and reflash the rom ...
ciao ciao
I'm sorry for your loss. May it rust in peace
bimiki said:
Wow ... bad news
Try to put it in bootloader mode and reflash the rom ...
Click to expand...
Click to collapse
That's a good idea..
I've installed the new ROM for the first time on my brand new LEO, everything seemed to go well..then after finishing it it rebooted..and the phone dean't start at all..all I see is a white screen with HTC on it..and that's it..nothing happens then..
I tryed to HARD reset..and it won't work neither..please someone help me..
imauser said:
I've installed the new ROM for the first time on my brand new LEO, everything seemed to go well..then after finishing it it rebooted..and the phone dean't start at all..all I see is a white screen with HTC on it..and that's it..nothing happens then..
I tryed to HARD reset..and it won't work neither..please someone help me..
Click to expand...
Click to collapse
You need to flash a radio like the 2.07 or the 2.08..........it is in the wiki,and manual in the sticky
http://forum.xda-developers.com/showthread.php?t=609477
thnaks for a fast responce..i seem to find a solution..I've pressed the volume donw while booting..an now i am reinstaling another ROM..hope its gonna work..
..cross my fingers..
THNX GOD and tinuz97 for a fast reaction it worked!!
if anyone have the same problem..I'll gladly help
imauser said:
THNX GOD and tinuz97 for a fast reaction it worked!!
if anyone have the same problem..I'll gladly help
Click to expand...
Click to collapse
no ta mate, id rather read the instructions first.
Hey guys i got a little success of booting wm6.1 of Cottulla on Alphine see the video link below it stars booting but stuck at bad radio
http://www.youtube.com/watch?v=WGowmlDYcL4
Comrade, i can't see anything on this video. Could u upload a video in better quality? Please.
Later
Ok i will upload it later the problem is that when it starts booting the backlight of my Htc Alphine is off.
Is there a way to turn it on that time?
bilalbest said:
Hey guys i got a little success of booting wm6.1 of Cottulla on Alphine see the video link below it stars booting but stuck at bad radio
Click to expand...
Click to collapse
So this is Cotulla's build ?
he just put bootloader from magician rom into alpine (same processor, same way)
Anyways, glory for you.
Ah - I understand now .. oh well
...sorry double post...
hmm... i have think he was finish
bilalbest, I think, u don't have any chance to cook usable rom in this way. Pardon.
At least u must have code base from cotulla's project, but it's not sharing, therefore it practically useless. Only reverse engineering can help u, but it's very very hard process, which requires special knowledge.
So, IMHO.
Hey Guys Just wait and pray
Hey you all you should wait for the time i told you............i told you that i am busy for almost 5 months in my studies.......
I am going to complete my bootloader development then i will try to boot the Cotulla's Wm6.1 through it maybe this would be successful...the bootloader is still in development......
bilalbest said:
Hey you all you should wait for the time i told you............i told you that i am busy for almost 5 months in my studies.......
I am going to complete my bootloader development then i will try to boot the Cotulla's Wm6.1 through it maybe this would be successful...the bootloader is still in development......
Click to expand...
Click to collapse
Hex values in magldr. Easy as pissing for me
yeah you are right go on maybe you can do it.......otherwise i have 2 other plans that will prove successful.
bilalbest said:
yeah you are right go on maybe you can do it.......otherwise i have 2 other plans that will prove successful.
Click to expand...
Click to collapse
I think you can install magican radio image, but I really can't tell that it won't harm your GSM module at all..
aeroflyluby said:
I think you can install magican radio image, but I really can't tell that it won't harm your GSM module at all..
Click to expand...
Click to collapse
I will ask from you later now i will remain busy for almost 5 weeks and will not see the forum so i will come back in January 1 to 15,,, of 2011..till then bye
update rom radio 1.00
for you
xdadev.f1ip.net/index.php?dir=Alpine/&file=AP_O2UK_11100_169_10000_ShipXdaIIi.exe
nice work
thankyou verry much!i'have o2i,skin sir desige verry nice!!!thankyou sir!!!!!bestwish!!
that's is really work in xda IIi?
how to make like that
i'm just a newbie
Wait
just wait i will work on it later
Sorry, but i see phone and BT, but not a wifi! Is it really alpine???
Leviafan said:
Sorry, but i see phone and BT, but not a wifi! Is it really alpine???
Click to expand...
Click to collapse
No, it's himalaya probably