Hi Guys
I've been reading this forum for two days now, and still haven't found the answer to my solution.
I used Olipros unlocker on Saturday, but after step 1 the screen went black and it wont reboot.
I can get into bootloader (by pressing the camera button and the reset pin at the same time), but I can't install the OS from Activesync as the PC can't see the ameo.
I can also get to factory reset (by pressing the volume slider down and powering up), but I haven't done anything in there.
The bootloader shows Olipro SPL 1.2
At the same time as getting this sorted I thought I'd upgrade to WM6 from the posts that are here, but I can't find at all, how to get the ROM onto the ameo without Activesync seeing it.
Can someone point me in the right direction please?
Thanks for any help in advance.
Joe
i have had the same problem.
i solve doing this :
1rst enter in bootloader mode ( Reset + camera button )
plug your USB cable
and flash WM5 or WM6 rom with flash utility
utilies doesn't trcognize your current rom etc but donc care about
then after flash 100% my athena (HTC advantage boot up normaly again)
i hope my experience help you
Hi, thanks for your advice:
Here's what I'm doing:
Bootloader (Camera and reset hole)
Bootloader shows ATHE100
SPL-v1.20. Olipro
USB
I'm then running mtty tool and can get a connection with:
Cmd>
I type Task 32 and it states Level=0
do I then use the lnbs command?
I'm sorry, I dont see what to do now
You state to upgrade ROM with flash utility, but whats the flash utility?
Is it Mtty?
Or another tool that I haven't got yet?
I have downloaded the ROM update tools, and within the rar files there are apps like, enterbootloader, ruugetinfo, rapitool, etc, but they wont run, they say that they aren't a valid win32 application
Sorry, I know my phones not knackered, just don't know how to get out of it.
Joe
run ROMUpdateutility.exe provided with WM5 rom update or WM6 rom update (if you don't have look at XDA ftps ...)
Thank you so much for your help, got WM6 running on it now, everything's v good.
Cheers
Joe
i'm happy you ameo up and alive
seosamh1973 said:
Hi Guys
I've been reading this forum for two days now, and still haven't found the answer to my solution.
I used Olipros unlocker on Saturday, but after step 1 the screen went black and it wont reboot.
I can get into bootloader (by pressing the camera button and the reset pin at the same time), but I can't install the OS from Activesync as the PC can't see the ameo.
I can also get to factory reset (by pressing the volume slider down and powering up), but I haven't done anything in there.
The bootloader shows Olipro SPL 1.2
At the same time as getting this sorted I thought I'd upgrade to WM6 from the posts that are here, but I can't find at all, how to get the ROM onto the ameo without Activesync seeing it.
Can someone point me in the right direction please?
Thanks for any help in advance.
Joe
Click to expand...
Click to collapse
Just out of curiosity, did you take your storage card out before you began the unlock?
not for me : no SD card , only microdrive
Nope, didn't realise I had to....
Is that the common factor in it failing?
Joe
seosamh1973 said:
Nope, didn't realise I had to....
Is that the common factor in it failing?
Joe
Click to expand...
Click to collapse
I don't think so, I don't have a memory card on my Ameo and had the same problem.. And when I told the Olipro **** that I got the black screen AND his SPL was flashed successfully, he kinda went frenzy about "IT IS NOT MY FAULT, IT IS YOURS! YOU ARE STUPID, I AM GOD!".. Nice support, huh?
Donate the mofo!
yes nice support indeed
TryOG said:
"IT IS NOT MY FAULT, IT IS YOURS! YOU ARE STUPID, I AM GOD!".. Nice support, huh?
Click to expand...
Click to collapse
I suggest people read the forum thread, I've been aware of the problem since day one after xmen's pda reset itself while running an unpatched SPL.
clearly you're a moron, or your english is ****, possibly both.
Olipro said:
I suggest people read the forum thread, I've been aware of the problem since day one after xmen's pda reset itself while running an unpatched SPL.
clearly you're a moron, or your english is ****, possibly both.
Click to expand...
Click to collapse
This guy refers to you...
Pantaloonie said:
I'm glad i'm not the only one who feels that way.
The man is obnoxious, arrogant and rude.
But hey - it's a public forum, he can say whatever he wants - as can I.
Click to expand...
Click to collapse
Just don't flame "stupid" people. And if someone asks for help: ignore, say that you won't help them or help them properly (without flaming).
Thnx.
And another thing.
You look *smart* and *cool* when you flame other people when they get problems and ask for help!!! (not)
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Olipro said:
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Click to expand...
Click to collapse
Thank you for this friendly answer... (I mean it)
Olipro said:
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Click to expand...
Click to collapse
Better,,, and sorta friendly.
What do you think about this little gem:
Pissed off == no reply @ the forums.
Cooled down == yeah, ok I can reply.
But then again, what do I know, eh?
Some people PAID you to hack/crack/mangle/otherwise play around with a Athena.
No, I didn't use any of your programs... I have had an unlocked Athena since day one. No, I will wait for the official Dopod release on the 20th (hopefully). If I see any bugs, HELL YES I will query the collective hive mind here.
But please, lay off the "I'm better than you" attitude. It doesn't do any good at all.
Olipro said:
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Click to expand...
Click to collapse
TryOG said:
Thank you for this friendly answer... (I mean it)
Click to expand...
Click to collapse
Alright guys! I do believe we can start all over, be nice & make progress! Let's try to enjoy our devices and appreciate each other.
Abram said:
Alright guys! I do believe we can start all over, be nice & make progress! Let's try to enjoy our devices and appreciate each other.
Click to expand...
Click to collapse
Yeah, let's bring the '70s back
TryOG said:
Yeah, let's bring the '70s back
Click to expand...
Click to collapse
70's ? you're a decade too late there...
fards said:
70's ? you're a decade too late there...
Click to expand...
Click to collapse
The 70's songs are less worse...
Related
I have installed windows mobile 6 on my orbit and its now stucked in the boot screen wat shall i do now.. plz help my orbit is so much to me
As far as I know there is no WM6 for the orbit yet !!!!!!!!!
So Where did you get it from?
wadialdoor said:
As far as I know there is no WM6 for the orbit yet !!!!!!!!!
So Where did you get it from?
Click to expand...
Click to collapse
Perhaps risk with other WM6 ROM.
afxal said:
I have installed windows mobile 6 on my orbit and its now stucked in the boot screen wat shall i do now.. plz help my orbit is so much to me
Click to expand...
Click to collapse
No offence meant but in my opinion you do deserve the noob of the year award.Did you even try to take out time to read the posts in the forum,or the wiki??As of now there is no wm6 for the artemis,people have bricked their devices by trying to flash different carrier roms for the same device and you tried it with a unknown rom for a unknown device.Try to go through the forums and read the WIKI,though i doubt it would help in your case.Try imeiunlocker.com too.
afxal said:
I have installed windows mobile 6 on my orbit and its now stucked in the boot screen wat shall i do now.
Click to expand...
Click to collapse
Go buy a Nokia!!
afxal said:
I have installed windows mobile 6 on my orbit and its now stucked in the boot screen wat shall i do now.. plz help my orbit is so much to me
Click to expand...
Click to collapse
Your not the first to have done this in the Artemis forum and prob not the last. Your device maybe salvagable if yoj can get it into bootloader mode. hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen' If you do attach device to pc via usb cable and flash factory rom. You do not need to be activesynced to do this. Before you flash again with a non-factory rom, your device MUST be cid unlocked.
Gajet said:
Go buy a Nokia!!
Click to expand...
Click to collapse
Are you sure the rom will work on a nokia?
uniqueboy said:
Are you sure the rom will work on a nokia?
Click to expand...
Click to collapse
Or go buy an Eten X500 or M700.
Eten has provided a WM6 upgrade for these devices, just this weekend.
http://www.etencorp.com/Support/WM6/index.php
They're quicker than HTC for providing the upgrades. They really want to beat HTC
HTC, come on... give us the WM6 upgrade now please ;-)
you guys really know how to rip the proverbial out of a noob dont you. LOL
bdangol said:
you guys really know how to rip the proverbial out of a noob dont you. LOL
Click to expand...
Click to collapse
A noob is someone who comes here and asks "How can I upgrade to WM6" and is politely told they can't or less politely told to search. Flashing your expensive pocket PC / Phone with god only knows what software, (Probably one of Longhairs copies of Windows 95), does not rank high enough to be classed as noob. Surely anyone might research what to do first???
Afxal first sorry for me a being such an ass in my earlier post,you certainly did not deserve those comments,mistakes do happen as meschle pointed out,go through all the posts carefully because in my experience in this forum some of the junior members have far greater knowledge than the seniors,and you could ask some of the mods for help,hope you retreive your bricked artemis.
I also hope you sort it, good luck, Nokias suck don't get one.
arvind09 said:
Afxal first sorry for me a being such an ass in my earlier post,you certainly did not deserve those comments,mistakes do happen as meschle pointed out,go through all the posts carefully because in my experience in this forum some of the junior members have far greater knowledge than the seniors,and you could ask some of the mods for help,hope you retreive your bricked artemis.
Click to expand...
Click to collapse
Your ok arvind - i cant see an ass
Jeez, don't get too emotional guys haha! First of all he just comes here telling us he installed WM 6, what kind of rom, what filename. He gives us way too less info to be helpful. And secondly he doesn't give a *** about the thread. He won't respond! So he is an ass! haha
p.s:Typed this with P3300, way too much work lol
Jeez, don't get too emotional guys haha! First of all he just comes here telling us he installed WM 6, what kind of rom, what filename? He gives us way too less info to be helpful.
And secondly he doesn't give a *** about the thread. He won't respond! So he IS an ass! haha
p.s: Typed this with P3300, way too much work lol
My unit is working fine..can make receieve calls etc...
Am running on Meschle's 2.11 lite....hard reset fine everything fine...
When I try to upgrade to the full version - Gives me error...Connection.check cradle etc...
Tried Official ROM - same problem
Tried Manual Bootloader - goes into a white screen and hangs...then after 4-5 minutes i see the colored screen with IPL 3.04.0001 and SPL 1.11.000...
if I reset goes back to the ROM that was there on it...works fine...
Did I just brick my phone?
Not that I am not happy with it...but then why the Bootloader and flashing is not working?
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
NikMel said:
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
Click to expand...
Click to collapse
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
hehe
nice
devdarshan said:
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
Click to expand...
Click to collapse
NikMel said:
nice
Click to expand...
Click to collapse
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
tongphan said:
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
Click to expand...
Click to collapse
NikMel said:
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
Click to expand...
Click to collapse
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
tongphan said:
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
Click to expand...
Click to collapse
NikMel said:
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
Click to expand...
Click to collapse
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
I can't tell you for sure if this procedure will work for your pda.
this works on artemis or p3300 or dopod p800
tongphan said:
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
Click to expand...
Click to collapse
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Arura said:
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
Click to expand...
Click to collapse
NikMel said:
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Click to expand...
Click to collapse
Found donate! link in the bar.
hehe OK
Arura said:
Found donate! link in the bar.
Click to expand...
Click to collapse
NikMel said:
hehe OK
Click to expand...
Click to collapse
I meant navigation bar!
Hey all,
I updated my Touch HD to the latest update off the website, but now my screen is green and I get absolytely no reception. Does anyone know whats going on?
I dont want anything fancy. Just a working phone...
also, i will hook someone up $50, via paypal if you can help me fix this ****. Just PM me. Thx.
Link
A resource thread on the latest HTC upgrade ROM.
Many people, myself included had the green screen/sluggish performance problem.
It is solved by:
1) Flashing back to the original ROM
2) Flashing back to the original SPL
3) Using USPL to flash the new update ROM
Details are fully explained in the thread I linked to above. I suggest reading it thoroughly before doing anything.
Hopefully this fixes your problem. Please pop back if you have any problems or you've solved it!
ya, i have just about downloaded every file, read every thread, and have tried everything...i just want my stupid phone to work!!!
wtf is flashing?! i just wanna run a file and have it work!! why is this so difficult?!
skotler said:
ya, i have just about downloaded every file, read every thread, and have tried everything...i just want my stupid phone to work!!!
wtf is flashing?! i just wanna run a file and have it work!! why is this so difficult?!
Click to expand...
Click to collapse
Well, you have just flashed your HTC Touch HD with the latest HTC ROM from their website from the sounds of it.
I suggest reading that thread. I would consider myself a Novice at this but it is quite easily explained and will probably take you no longer than 1 hour to read, understand and do.
I just dont understand why HTC would publicly release an update that would **** up your phone?
I dont want to learn how to program this ****, I just want to run an update and have it work...soooo frustrating!!!!!!!
like, if someone can hold my hand and help me with this, I will seriously pay you...
skotler said:
I just dont understand why HTC would publicly release an update that would **** up your phone?
Click to expand...
Click to collapse
Its not HTC who "****ed up" your phone, but it was you! You have installed HSPL, which isn't compatible with the latest rom. Its not HTC fault at all.
So, try to get back to the stock spl, then flash the rom again. You shouldn't experience this green screen problem any longer then.
All questions regarding this problem were already answered, so just read through the various threads, take some time, and you will get it.
johnpatcher said:
Its not HTC who "****ed up" your phone, but it was you! You have installed HSPL, which isn't compatible with the latest rom. Its not HTC fault at all.
So, try to get back to the stock spl, then flash the rom again. You shouldn't experience this green screen problem any longer then.
All questions regarding this problem were already answered, so just read through the various threads, take some time, and you will get it.
Click to expand...
Click to collapse
this is a complete answer. you just won 50$. hope he is going to send you
Hey guys i got a little success of booting wm6.1 of Cottulla on Alphine see the video link below it stars booting but stuck at bad radio
http://www.youtube.com/watch?v=WGowmlDYcL4
Comrade, i can't see anything on this video. Could u upload a video in better quality? Please.
Later
Ok i will upload it later the problem is that when it starts booting the backlight of my Htc Alphine is off.
Is there a way to turn it on that time?
bilalbest said:
Hey guys i got a little success of booting wm6.1 of Cottulla on Alphine see the video link below it stars booting but stuck at bad radio
Click to expand...
Click to collapse
So this is Cotulla's build ?
he just put bootloader from magician rom into alpine (same processor, same way)
Anyways, glory for you.
Ah - I understand now .. oh well
...sorry double post...
hmm... i have think he was finish
bilalbest, I think, u don't have any chance to cook usable rom in this way. Pardon.
At least u must have code base from cotulla's project, but it's not sharing, therefore it practically useless. Only reverse engineering can help u, but it's very very hard process, which requires special knowledge.
So, IMHO.
Hey Guys Just wait and pray
Hey you all you should wait for the time i told you............i told you that i am busy for almost 5 months in my studies.......
I am going to complete my bootloader development then i will try to boot the Cotulla's Wm6.1 through it maybe this would be successful...the bootloader is still in development......
bilalbest said:
Hey you all you should wait for the time i told you............i told you that i am busy for almost 5 months in my studies.......
I am going to complete my bootloader development then i will try to boot the Cotulla's Wm6.1 through it maybe this would be successful...the bootloader is still in development......
Click to expand...
Click to collapse
Hex values in magldr. Easy as pissing for me
yeah you are right go on maybe you can do it.......otherwise i have 2 other plans that will prove successful.
bilalbest said:
yeah you are right go on maybe you can do it.......otherwise i have 2 other plans that will prove successful.
Click to expand...
Click to collapse
I think you can install magican radio image, but I really can't tell that it won't harm your GSM module at all..
aeroflyluby said:
I think you can install magican radio image, but I really can't tell that it won't harm your GSM module at all..
Click to expand...
Click to collapse
I will ask from you later now i will remain busy for almost 5 weeks and will not see the forum so i will come back in January 1 to 15,,, of 2011..till then bye
update rom radio 1.00
for you
xdadev.f1ip.net/index.php?dir=Alpine/&file=AP_O2UK_11100_169_10000_ShipXdaIIi.exe
nice work
thankyou verry much!i'have o2i,skin sir desige verry nice!!!thankyou sir!!!!!bestwish!!
that's is really work in xda IIi?
how to make like that
i'm just a newbie
Wait
just wait i will work on it later
Sorry, but i see phone and BT, but not a wifi! Is it really alpine???
Leviafan said:
Sorry, but i see phone and BT, but not a wifi! Is it really alpine???
Click to expand...
Click to collapse
No, it's himalaya probably
[Q] after trying to delete main google account my phone stuck on "droid" screen
I just wanted to change the main google account to enter the market. I just made a little search and I sth. says that "open root explore, go data=> system => find accounts.db and rename it accounts.db.bak" I've that this and nothing changed. Another one was saying "Go Applications=>Manage Applications google apps clear" I've done it too but no difference again. then I see this vid /watch?v=aFinbsXqTE0, system=> framework => rename framework-res.apk to framework-res.apk.bak" but after the "force close" the phone reset itself and stuck on "droid" screen.
somebody tell me what to do, please
I really need help
reis2086 said:
I really need help
Click to expand...
Click to collapse
Are u on stock or custom ROM ? But most likely you would have to hard reset phone or reflash(i must reflash,hard reset doesnt work it stucks like yours)
reis2086 said:
I really need help
Click to expand...
Click to collapse
Part of the forums rules is not to use foul language by the way, I don't care but some people might so you should refrain from doing so.
As for your problem, you will probably have to follow the above post's advice. I don't understand why you couldn't have just changed the account through the market? Why bother with root explorer and deleting/renaming potentially crucial files? Makes no sense.
Finally, I got some answers! I feel like I'm in Fringe or sth.
Cjovecje! said:
Are u on stock or custom ROM ? But most likely you would have to hard reset phone or reflash(i must reflash,hard reset doesnt work it stucks like yours)
Click to expand...
Click to collapse
-story time
My phone came from Germany and I live in Turkey. There are so many taxes and prices are higher and higher.
-
I remember that it was firstly opening as windows m. (white back, green front) and then turns a screen that loads android and keeps going. I guess that means ROM. how do we do hard reset? or reflash? thanks.
Nigeldg said:
Part of the forums rules is not to use foul language by the way, I don't care but some people might so you should refrain from doing so.
As for your problem, you will probably have to follow the above post's advice. I don't understand why you couldn't have just changed the account through the market? Why bother with root explorer and deleting/renaming potentially crucial files? Makes no sense.
Click to expand...
Click to collapse
Then sorry for the word. I hope that It wouldn't be problem for the admin. actually in the subtitles of the movies, they translate it as "hell", "damn" or etc.
-story again
I used it with my simcard at the first week when I get my phone and entered the market with a HTC sense account. But after the first week my damn operator closed the my phone to calling because of I haven't registered it yet with a passport. Then I have to use it without the card until I find a passport and when I took off the simcard the HTC sense passed away and when I tried to open market it asked me the password of the account and I had no idea about it.
-
If you have EU Leo
http://www.4shared.com/get/Jnq0WtI5/RUU_Leo_HTC_WWE_1484052_Radio_.html
Flash this. This is stock windows mobile 6.5 ONLY EU MODEL.
Then later if u want i will give you guide to flash android.
U flash it by connectin usb (u need drivers) into bootloader mode then run this. This is STOCK ROM FOR EU ONLY MODEL!
Cjovecje! said:
If you have EU Leo
.../Jnq0WtI5/RUU_Leo_HTC_WWE_1484052_Radio_.html
Flash this. This is stock windows mobile 6.5 ONLY EU MODEL.
Then later if u want i will give you guide to flash android.
U flash it by connectin usb (u need drivers) into bootloader mode then run this. This is STOCK ROM FOR EU ONLY MODEL!
Click to expand...
Click to collapse
OK, I got it It's for EU. I'll try to do this tomorrow morning. Thank you dear Serbian bro. People thinks that Serbian hates Turkish but now I see that it was a lie.
reis2086 said:
OK, I got it It's for EU. I'll try to do this tomorrow morning. Thank you dear Serbian bro. People thinks that Serbian hates Turkish but now I see that it was a lie.
Click to expand...
Click to collapse
Its not about the race. Though pretty much turks cheat in games.
Cjovecje! said:
Its not about the race. Though pretty much turks cheat in games.
Click to expand...
Click to collapse
I can't say that they don't. and if you ask "Y U cheating " they'll probably say, "but everybody does it"
Then back to the my Leo, I don't really know what drivers are you talking about and I tried to download the file twice and it disconnected %90 at my first try, %30 at the second try /facepalm
reis2086 said:
I can't say that they don't. and if you ask "Y U cheating " they'll probably say, "but everybody does it"
Then back to the my Leo, I don't really know what drivers are you talking about and I tried to download the file twice and it disconnected %90 at my first try, %30 at the second try /facepalm
Click to expand...
Click to collapse
Download the HD2 NAND toolkit, boot your phone into bootloader, connect USB to computer and run a Task29. This will clear everything from your phone. From here you can flash radio, magldr, cwm and ROM as normal
Nigeldg said:
Download the HD2 NAND toolkit, boot your phone into bootloader, connect USB to computer and run a Task29. This will clear everything from your phone. From here you can flash radio, magldr, cwm and ROM as normal
Click to expand...
Click to collapse
I've hold the vol down button until the colors but the toolkit just can not find it
Edit: My Windows is downloading a driver "Qualcoomm CMDA Technologies MSM". it must be the driver that serbian guy told me
I've just done the work with the toolkit! but it doesn't seems like I've done it with the phone. It's showing me the white screen with green htc sign since a few minutes. I don't know if I have to do sth. else
edit: thank you british guy. now my phone stuck on white screen. thank you /facepalm
reis2086 said:
I've just done the work with the toolkit! but it doesn't seems like I've done it with the phone. It's showing me the white screen with green htc sign since a few minutes. I don't know if I have to do sth. else
edit: thank you british guy. now my phone stuck on white screen. thank you /facepalm
Click to expand...
Click to collapse
Yeah, Task29 deletes everything. Now you can reflash Radio, MAGLDR, CWM then your ROM.
Nigeldg said:
Yeah, Task29 deletes everything. Now you can reflash Radio, MAGLDR, CWM then your ROM.
Click to expand...
Click to collapse
Do I need a rom if I want to keep going with win mobile?
reis2086 said:
Do I need a rom if I want to keep going with win mobile?
Click to expand...
Click to collapse
In that case just flash WinMo
Nigeldg said:
In that case just flash WinMo
Click to expand...
Click to collapse
so now, my next mission is learn how to flash WinMo or Android.
reis2086 said:
so now, my next mission is learn how to flash WinMo or Android.
Click to expand...
Click to collapse
I would recommend flashing NAND Android. this is a complete guide on how to do so.
Just listen to me. First flash winmo to see if everything is ok and to setup device sync (driver)
Sent from my HTC HD2 using Tapatalk
Nigeldg said:
I would recommend flashing NAND Android. this is a complete guide on how to do so.
Click to expand...
Click to collapse
Honestly, I couldn't really understand this article. *pokerface*
Cjovecje! said:
Just listen to me. First flash winmo to see if everything is ok and to setup device sync (driver)
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
OK, I'll listen to you. 4shared.com is forbidden in Turkey so that there are problems with downloading from this webside, so I couldn't download the document you sent me first. Today a friend of me bring me ICS with a flash disc and now I'm trying to find a way to upload it my phone. It seems like theres a lot of thing that I need you to teach to me dear Serbian bro.......
reis2086 said:
Honestly, I couldn't really understand this article. *pokerface*
OK, I'll listen to you. 4shared.com is forbidden in Turkey so that there are problems with downloading from this webside, so I couldn't download the document you sent me first. Today a friend of me bring me ICS with a flash disc and now I'm trying to find a way to upload it my phone. It seems like theres a lot of thing that I need you to teach to me dear Serbian bro.......
Click to expand...
Click to collapse
Well in that case in the stickies there are many other guides. And also he's right Flashing WinMo first may be of benefit