My unit is working fine..can make receieve calls etc...
Am running on Meschle's 2.11 lite....hard reset fine everything fine...
When I try to upgrade to the full version - Gives me error...Connection.check cradle etc...
Tried Official ROM - same problem
Tried Manual Bootloader - goes into a white screen and hangs...then after 4-5 minutes i see the colored screen with IPL 3.04.0001 and SPL 1.11.000...
if I reset goes back to the ROM that was there on it...works fine...
Did I just brick my phone?
Not that I am not happy with it...but then why the Bootloader and flashing is not working?
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
NikMel said:
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
Click to expand...
Click to collapse
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
hehe
nice
devdarshan said:
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
Click to expand...
Click to collapse
NikMel said:
nice
Click to expand...
Click to collapse
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
tongphan said:
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
Click to expand...
Click to collapse
NikMel said:
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
Click to expand...
Click to collapse
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
tongphan said:
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
Click to expand...
Click to collapse
NikMel said:
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
Click to expand...
Click to collapse
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
I can't tell you for sure if this procedure will work for your pda.
this works on artemis or p3300 or dopod p800
tongphan said:
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
Click to expand...
Click to collapse
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Arura said:
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
Click to expand...
Click to collapse
NikMel said:
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Click to expand...
Click to collapse
Found donate! link in the bar.
hehe OK
Arura said:
Found donate! link in the bar.
Click to expand...
Click to collapse
NikMel said:
hehe OK
Click to expand...
Click to collapse
I meant navigation bar!
Related
Hello Wallaby-Users.....
New Upgrade-Option is waiting for you.
Hope to release soon a WM2003SE-Edition for the Wallaby.....
More Infos coming soon here in ths thread.
See some screenshots:
WOOOOHOOOOO!!!!!!!! WEEEE!!!!! YOU ARE OUR MAN!!!!
LumpiStefan said:
Hello Wallaby-Users.....
New Upgrade-Option is waiting for you.
Hope to release soon a WM2003SE-Edition for the Wallaby.....
More Infos coming soon here in ths thread.
See some screenshots:
Click to expand...
Click to collapse
Btw if you need a PW10A1 tester, you can mail me/find me on msn: [email protected]
Ok. Now it´s done .....
Rom is available.
Until now there are a few linitations with this ROM:
1.) Bootimage are not adjustable. Needs more investigations
2.) Flashing is only via EXE-File possible, because this ROMs are little bit bigger than the normal an xdatools checks the filesize.....
3.) Part of ROm that was reserved for backup is used in this ROM, so those data will be destroyed while flashing.....
ROM is available without any additional Programs (Download the Attachement) and also already included in the kitchen (http://lumpistefan.dyndns.org/).
I cannot gurantee, that all is working fine. So flashing is on your own risc....
Also it would be great if some nice guys donate for the xda-developers or for me. Link ares available here and on my kitchen....
If you have any problems, please use this thread, PM to me or Email....
Have fun with the new ROM...
Stefan
LumpiStefan Gr8 Work
In the rom kitchen it's available with additional file size after adding some softs it's 16.1 , is it safe to flash it?
You are our man once again! cooked a rom in the kitchen, flashed it, works flawlessly....THANK YOU!
Does it still have the SD-erase bug?
KTamas said:
You are our man once again! cooked a rom in the kitchen, flashed it, works flawlessly....THANK YOU!
Click to expand...
Click to collapse
Is it fast, working normaly, buggy?! tell me I'm excited heheh
ramram said:
KTamas said:
You are our man once again! cooked a rom in the kitchen, flashed it, works flawlessly....THANK YOU!
Click to expand...
Click to collapse
Is it fast, working normaly, buggy?! tell me I'm excited heheh
Click to expand...
Click to collapse
It is faster than WM2003
when will it be revealed in german?
It's working good and it's faster- movies works faster.
I hope that SD card erase bug is fixed.
I tested it, so far working and fast. I'm just waiting the Sd-Erasure bugg... I hope it wont happen....
theholysaint said:
when will it be revealed in german?
Click to expand...
Click to collapse
I think never. :-(
Stefan
KTamas said:
Does it still have the SD-erase bug?
Click to expand...
Click to collapse
Don´t know. Myself only had this problem one time in using the xda with WM2003 for 1 1/2 Year. WM2003SE i have running now for 2 days. So i can´t tell it really....
Stefan
Hi Stefan,
i am geting GetDeviseData error, any idea? btw thanks for great work
LumpiStefan said:
KTamas said:
Does it still have the SD-erase bug?
Click to expand...
Click to collapse
Don´t know. Myself only had this problem one time in using the xda with WM2003 for 1 1/2 Year. WM2003SE i have running now for 2 days. So i can´t tell it really....
Stefan
Click to expand...
Click to collapse
I think it does not (i repeat, i THINK). The sd-erase bug was a bug in Windows CE 4.2 (WM2003 based on that), and there were a patch that correct that bug (if you have the WCE4.2 source of course ), so WM2003SE should be patched.
kamiar said:
i am geting GetDeviseData error, any idea? btw thanks for great work
Click to expand...
Click to collapse
There are 2 possibilities:
1.) Wrong device. This only works with Wallaby devices (XDA I / MDA I / ... )
2.) You have rom that prohibits flashing via exe (e.g. 4.01.16) Than you have to downgrade first via SD-card (e.g. Special Edition ROM) and then upgrade to WM2003SE
HTH
Stefan
As I remember I flashed my device with this ROM long time ago, Lumpistefan you finnaly sort it out to let it work GOOD WORK!!!! :wink:
were can i gt the patch
im trying to upgrade i dont have the patch yet sd eraser.
Hi,
I had rom 4.01 and had to downgrade to 3.17 with SD to be able to upgrade to 2003SE, i did that but now it hangs at boot screen and the problem is that i dont have a card reader and even can not sync, how can i make another image on SD or any other solution?pls
Thanks
Hi Guys
I've been reading this forum for two days now, and still haven't found the answer to my solution.
I used Olipros unlocker on Saturday, but after step 1 the screen went black and it wont reboot.
I can get into bootloader (by pressing the camera button and the reset pin at the same time), but I can't install the OS from Activesync as the PC can't see the ameo.
I can also get to factory reset (by pressing the volume slider down and powering up), but I haven't done anything in there.
The bootloader shows Olipro SPL 1.2
At the same time as getting this sorted I thought I'd upgrade to WM6 from the posts that are here, but I can't find at all, how to get the ROM onto the ameo without Activesync seeing it.
Can someone point me in the right direction please?
Thanks for any help in advance.
Joe
i have had the same problem.
i solve doing this :
1rst enter in bootloader mode ( Reset + camera button )
plug your USB cable
and flash WM5 or WM6 rom with flash utility
utilies doesn't trcognize your current rom etc but donc care about
then after flash 100% my athena (HTC advantage boot up normaly again)
i hope my experience help you
Hi, thanks for your advice:
Here's what I'm doing:
Bootloader (Camera and reset hole)
Bootloader shows ATHE100
SPL-v1.20. Olipro
USB
I'm then running mtty tool and can get a connection with:
Cmd>
I type Task 32 and it states Level=0
do I then use the lnbs command?
I'm sorry, I dont see what to do now
You state to upgrade ROM with flash utility, but whats the flash utility?
Is it Mtty?
Or another tool that I haven't got yet?
I have downloaded the ROM update tools, and within the rar files there are apps like, enterbootloader, ruugetinfo, rapitool, etc, but they wont run, they say that they aren't a valid win32 application
Sorry, I know my phones not knackered, just don't know how to get out of it.
Joe
run ROMUpdateutility.exe provided with WM5 rom update or WM6 rom update (if you don't have look at XDA ftps ...)
Thank you so much for your help, got WM6 running on it now, everything's v good.
Cheers
Joe
i'm happy you ameo up and alive
seosamh1973 said:
Hi Guys
I've been reading this forum for two days now, and still haven't found the answer to my solution.
I used Olipros unlocker on Saturday, but after step 1 the screen went black and it wont reboot.
I can get into bootloader (by pressing the camera button and the reset pin at the same time), but I can't install the OS from Activesync as the PC can't see the ameo.
I can also get to factory reset (by pressing the volume slider down and powering up), but I haven't done anything in there.
The bootloader shows Olipro SPL 1.2
At the same time as getting this sorted I thought I'd upgrade to WM6 from the posts that are here, but I can't find at all, how to get the ROM onto the ameo without Activesync seeing it.
Can someone point me in the right direction please?
Thanks for any help in advance.
Joe
Click to expand...
Click to collapse
Just out of curiosity, did you take your storage card out before you began the unlock?
not for me : no SD card , only microdrive
Nope, didn't realise I had to....
Is that the common factor in it failing?
Joe
seosamh1973 said:
Nope, didn't realise I had to....
Is that the common factor in it failing?
Joe
Click to expand...
Click to collapse
I don't think so, I don't have a memory card on my Ameo and had the same problem.. And when I told the Olipro **** that I got the black screen AND his SPL was flashed successfully, he kinda went frenzy about "IT IS NOT MY FAULT, IT IS YOURS! YOU ARE STUPID, I AM GOD!".. Nice support, huh?
Donate the mofo!
yes nice support indeed
TryOG said:
"IT IS NOT MY FAULT, IT IS YOURS! YOU ARE STUPID, I AM GOD!".. Nice support, huh?
Click to expand...
Click to collapse
I suggest people read the forum thread, I've been aware of the problem since day one after xmen's pda reset itself while running an unpatched SPL.
clearly you're a moron, or your english is ****, possibly both.
Olipro said:
I suggest people read the forum thread, I've been aware of the problem since day one after xmen's pda reset itself while running an unpatched SPL.
clearly you're a moron, or your english is ****, possibly both.
Click to expand...
Click to collapse
This guy refers to you...
Pantaloonie said:
I'm glad i'm not the only one who feels that way.
The man is obnoxious, arrogant and rude.
But hey - it's a public forum, he can say whatever he wants - as can I.
Click to expand...
Click to collapse
Just don't flame "stupid" people. And if someone asks for help: ignore, say that you won't help them or help them properly (without flaming).
Thnx.
And another thing.
You look *smart* and *cool* when you flame other people when they get problems and ask for help!!! (not)
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Olipro said:
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Click to expand...
Click to collapse
Thank you for this friendly answer... (I mean it)
Olipro said:
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Click to expand...
Click to collapse
Better,,, and sorta friendly.
What do you think about this little gem:
Pissed off == no reply @ the forums.
Cooled down == yeah, ok I can reply.
But then again, what do I know, eh?
Some people PAID you to hack/crack/mangle/otherwise play around with a Athena.
No, I didn't use any of your programs... I have had an unlocked Athena since day one. No, I will wait for the official Dopod release on the 20th (hopefully). If I see any bugs, HELL YES I will query the collective hive mind here.
But please, lay off the "I'm better than you" attitude. It doesn't do any good at all.
Olipro said:
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Click to expand...
Click to collapse
TryOG said:
Thank you for this friendly answer... (I mean it)
Click to expand...
Click to collapse
Alright guys! I do believe we can start all over, be nice & make progress! Let's try to enjoy our devices and appreciate each other.
Abram said:
Alright guys! I do believe we can start all over, be nice & make progress! Let's try to enjoy our devices and appreciate each other.
Click to expand...
Click to collapse
Yeah, let's bring the '70s back
TryOG said:
Yeah, let's bring the '70s back
Click to expand...
Click to collapse
70's ? you're a decade too late there...
fards said:
70's ? you're a decade too late there...
Click to expand...
Click to collapse
The 70's songs are less worse...
Everyone says it is always safer to flash an official rom between custom rom installs, but when I do, it changes my radio and ipl/spl to an undesirable version.
Is there an official nk.nbf file without the radio or ipl/spl available that I can use? I searched all over, even wizard wiki, but cant seem to find any.
Thank You in advance!
corky_aloof said:
Everyone says it is always safer to flash an official rom between custom rom installs, but when I do, it changes my radio and ipl/spl to an undesirable version.
Is there an official nk.nbf file without the radio or ipl/spl available that I can use? I searched all over, even wizard wiki, but cant seem to find any.
Thank You in advance!
Click to expand...
Click to collapse
I will upload the T-Mobile Official Rom without IPL/SPL/GSM shortly. I can even leave out the Official Splash screens if you like. Just let me know and it will be done.
EDIT:: Rom is uploading as we speak. Rom includes T-Mobile Official WM5 OS, HTC screen, Splash screen, Extended Rom.
Removed from Official Rom:: GSM/IPL/SPL>> Link Will be added shortly.
Wow, thanks dharvey! Splash screen omitting not necessary.
Thank You for your assistance!
corky_aloof said:
Wow, thanks dharvey! Splash screen omitting not necessary.
Thank You for your assistance!
Click to expand...
Click to collapse
Here it is.
This is the Official T-Mobile WM5 Rom exactly as it would come on a brand new T-Mobile MDA only this version has the IPL/SPL/GSM removed so that you do not have to re-flash the 3.08 IPL/SPL and your custom radio every time you upgrade.
Click here to go to download page.
Downloading now..
Thanks again!
corky_aloof said:
Downloading now..
Thanks again!
Click to expand...
Click to collapse
My pleasure. Just hold on to that. It comes in handy all the time.
dharvey4651 said:
Here it is.
This is the Official T-Mobile WM5 Rom exactly as it would come on a brand new T-Mobile MDA only this version has the IPL/SPL/GSM removed so that you do not have to re-flash the 3.08 IPL/SPL and your custom radio every time you upgrade.
Click here to go to download page.
Click to expand...
Click to collapse
Commendable !!!
Must say an excellent job done,buddy
Thanks
zabardast_1 said:
Commendable !!!
Must say an excellent job done,buddy
Thanks
Click to expand...
Click to collapse
Thank you!
I did this as much for me though as I did it for everyone else. When it comes to flashing new roms, I must say I am an addict and I like to have a clean base to start from before flashing a new rom and this is perfect because I don't have to reflash my IPL/SPL and GSM every time.
Hopefully someone will upload that to ftp so everyone can access it easily.
dharvey4651 said:
Thank you!
I did this as much for me though as I did it for everyone else. When it comes to flashing new roms, I must say I am an addict and I like to have a clean base to start from before flashing a new rom and this is perfect because I don't have to reflash my IPL/SPL and GSM every time.
Hopefully someone will upload that to ftp so everyone can access it easily.
Click to expand...
Click to collapse
YUP !!!
sure, an earnest need of a flashing junky
Hi
Is this Rom compatible with Europeen standards ??
What about AZERTY keyboard ??
Will it possible to restore bakup of actual datas ??
Thanks
can someone mirror it?
I can't download from megaupload. And I don't want to install their toolbar either.
Even if you don't want to, thanks for listening though. ^_
Thanks for this - great tool for a self professed flash junky.....
Have added to my must have flash files....
Have a good one
Please mirror it can't download it from Mega either. Help
noob here...
Haven't got a response yet.
I am thinking about flashing my HD2, but I am little afraid. I have superflat rate, unlimited emails and free calls in 3 different networks and stuff like that.
Will I loose something else except the warranty?
kind regards
vito
Im no expert, i wouldnt think it would!! You could always revert back to stock so it wouldnt affect your warranty.
Maybe some1 else could shed some light on this?
contract is on your sim card... you can do whatever u want with phone...
Lake292 said:
contract is on your sim card... you can do whatever u want with phone...
Click to expand...
Click to collapse
u also at vodafone?
could u help me out a little bit?
Which ROM and radio etc did u install?
vitolamanna said:
u also at vodafone?
could u help me out a little bit?
Which ROM and radio etc did u install?
Click to expand...
Click to collapse
Hey - im with Vodafone in the UK.
It doesnt matter what ROM you flash - it wont change your package.
Like above the minutes, texts and net usage is on your SIM card not phone.
My Sig shows what im currently using
cd78 said:
Hey - im with Vodafone in the UK.
It doesnt matter what ROM you flash - it wont change your package.
Like above the minutes, texts and net usage is on your SIM card not phone.
My Sig shows what im currently using
Click to expand...
Click to collapse
how different is ur ROM from the default one?
vitolamanna said:
how different is ur ROM from the default one?
Click to expand...
Click to collapse
How different is chalk from cheese LOL
vitolamanna said:
how different is ur ROM from the default one?
Click to expand...
Click to collapse
Mate - once you flash, you wont look back at the stock rom.
Its a breath of fresh air - faster, smoother, prettier -much better!
Read the Noob guide to flashing ROM's at the top of this forum.
Any questions PM me
cd78 said:
Mate - once you flash, you wont look back at the stock rom.
Its a breath of fresh air - faster, smoother, prettier -much better!
Read the Noob guide to flashing ROM's at the top of this forum.
Any questions PM me
Click to expand...
Click to collapse
thank you!!
i love cheese..and ok...I will try to flash the same ROm you guys have.. Energy?
I was gonna install HSPL first..but my SPL version is not 1.42...
1) To install this HSPL there must be SPL 1.42.0000 on your device.
Otherwise the installation will fail!
To check your SPL version, hold the Volume Down button and do a reset.
It is possible to downgrade to this SPL, by just flashing to an Official ROM
with this SPL version.
I think you can install hspl 2. Try that - it will just give you an error message if incompatible. What SPL do you have on your phone?
vitolamanna said:
thank you!!
i love cheese..and ok...I will try to flash the same ROm you guys have.. Energy?
I was gonna install HSPL first..but my SPL version is not 1.42...
Click to expand...
Click to collapse
Use HSPL2 instead then it much more versatile in any case.
Link to the NRG thread is in my signature.
cd78 said:
1) To install this HSPL there must be SPL 1.42.0000 on your device.
Otherwise the installation will fail!
To check your SPL version, hold the Volume Down button and do a reset.
It is possible to downgrade to this SPL, by just flashing to an Official ROM
with this SPL version.
I think you can install hspl 2. Try that - it will just give you an error message if incompatible. What SPL do you have on your phone?
Click to expand...
Click to collapse
yeah..I did HSPL2..worked fine
ClydeB1 said:
Use HSPL2 instead then it much more versatile in any case.
Link to the NRG thread is in my signature.
Click to expand...
Click to collapse
WAIT...your Rom is only for T-mobile phones???
vitolamanna said:
WAIT...your Rom is only for T-mobile phones???
Click to expand...
Click to collapse
No, it says it is ALSO compatible with the TMo US device, but works on all. As you can see I'm not on TMobile
ClydeB1 said:
No, it says it is ALSO compatible with the TMo US device, but works on all. As you can see I'm not on TMobile
Click to expand...
Click to collapse
it freezes at 0% while doing the radio update..what should i do???
Just unplug the USB??
vitolamanna said:
it freezes at 0% while doing the radio update..what should i do???
Just unplug the USB??
Click to expand...
Click to collapse
What hspl version do you have - check in bootloader mode - it should end in x.xx.HSPL and not in x.xx.0000.
ClydeB1 said:
What hspl version do you have - check in bootloader mode - it should end in x.xx.HSPL and not in x.xx.0000.
Click to expand...
Click to collapse
thank you so much!
vitolamanna said:
thank you so much!
Click to expand...
Click to collapse
Pleasure m8, enjoy your new phone.
ClydeB1 said:
Pleasure m8, enjoy your new phone.
Click to expand...
Click to collapse
one more question!
will there be a language conflict? since its a german phone...
With the new ROm it will change to english, right?
vitolamanna said:
one more question!
will there be a language conflict? since its a german phone...
With the new ROm it will change to english, right?
Click to expand...
Click to collapse
It'll now be an English phone . You can change the Sense language if you wish.
Hey guys i got a little success of booting wm6.1 of Cottulla on Alphine see the video link below it stars booting but stuck at bad radio
http://www.youtube.com/watch?v=WGowmlDYcL4
Comrade, i can't see anything on this video. Could u upload a video in better quality? Please.
Later
Ok i will upload it later the problem is that when it starts booting the backlight of my Htc Alphine is off.
Is there a way to turn it on that time?
bilalbest said:
Hey guys i got a little success of booting wm6.1 of Cottulla on Alphine see the video link below it stars booting but stuck at bad radio
Click to expand...
Click to collapse
So this is Cotulla's build ?
he just put bootloader from magician rom into alpine (same processor, same way)
Anyways, glory for you.
Ah - I understand now .. oh well
...sorry double post...
hmm... i have think he was finish
bilalbest, I think, u don't have any chance to cook usable rom in this way. Pardon.
At least u must have code base from cotulla's project, but it's not sharing, therefore it practically useless. Only reverse engineering can help u, but it's very very hard process, which requires special knowledge.
So, IMHO.
Hey Guys Just wait and pray
Hey you all you should wait for the time i told you............i told you that i am busy for almost 5 months in my studies.......
I am going to complete my bootloader development then i will try to boot the Cotulla's Wm6.1 through it maybe this would be successful...the bootloader is still in development......
bilalbest said:
Hey you all you should wait for the time i told you............i told you that i am busy for almost 5 months in my studies.......
I am going to complete my bootloader development then i will try to boot the Cotulla's Wm6.1 through it maybe this would be successful...the bootloader is still in development......
Click to expand...
Click to collapse
Hex values in magldr. Easy as pissing for me
yeah you are right go on maybe you can do it.......otherwise i have 2 other plans that will prove successful.
bilalbest said:
yeah you are right go on maybe you can do it.......otherwise i have 2 other plans that will prove successful.
Click to expand...
Click to collapse
I think you can install magican radio image, but I really can't tell that it won't harm your GSM module at all..
aeroflyluby said:
I think you can install magican radio image, but I really can't tell that it won't harm your GSM module at all..
Click to expand...
Click to collapse
I will ask from you later now i will remain busy for almost 5 weeks and will not see the forum so i will come back in January 1 to 15,,, of 2011..till then bye
update rom radio 1.00
for you
xdadev.f1ip.net/index.php?dir=Alpine/&file=AP_O2UK_11100_169_10000_ShipXdaIIi.exe
nice work
thankyou verry much!i'have o2i,skin sir desige verry nice!!!thankyou sir!!!!!bestwish!!
that's is really work in xda IIi?
how to make like that
i'm just a newbie
Wait
just wait i will work on it later
Sorry, but i see phone and BT, but not a wifi! Is it really alpine???
Leviafan said:
Sorry, but i see phone and BT, but not a wifi! Is it really alpine???
Click to expand...
Click to collapse
No, it's himalaya probably