Hi Guys
I've been reading this forum for two days now, and still haven't found the answer to my solution.
I used Olipros unlocker on Saturday, but after step 1 the screen went black and it wont reboot.
I can get into bootloader (by pressing the camera button and the reset pin at the same time), but I can't install the OS from Activesync as the PC can't see the ameo.
I can also get to factory reset (by pressing the volume slider down and powering up), but I haven't done anything in there.
The bootloader shows Olipro SPL 1.2
At the same time as getting this sorted I thought I'd upgrade to WM6 from the posts that are here, but I can't find at all, how to get the ROM onto the ameo without Activesync seeing it.
Can someone point me in the right direction please?
Thanks for any help in advance.
Joe
i have had the same problem.
i solve doing this :
1rst enter in bootloader mode ( Reset + camera button )
plug your USB cable
and flash WM5 or WM6 rom with flash utility
utilies doesn't trcognize your current rom etc but donc care about
then after flash 100% my athena (HTC advantage boot up normaly again)
i hope my experience help you
Hi, thanks for your advice:
Here's what I'm doing:
Bootloader (Camera and reset hole)
Bootloader shows ATHE100
SPL-v1.20. Olipro
USB
I'm then running mtty tool and can get a connection with:
Cmd>
I type Task 32 and it states Level=0
do I then use the lnbs command?
I'm sorry, I dont see what to do now
You state to upgrade ROM with flash utility, but whats the flash utility?
Is it Mtty?
Or another tool that I haven't got yet?
I have downloaded the ROM update tools, and within the rar files there are apps like, enterbootloader, ruugetinfo, rapitool, etc, but they wont run, they say that they aren't a valid win32 application
Sorry, I know my phones not knackered, just don't know how to get out of it.
Joe
run ROMUpdateutility.exe provided with WM5 rom update or WM6 rom update (if you don't have look at XDA ftps ...)
Thank you so much for your help, got WM6 running on it now, everything's v good.
Cheers
Joe
i'm happy you ameo up and alive
seosamh1973 said:
Hi Guys
I've been reading this forum for two days now, and still haven't found the answer to my solution.
I used Olipros unlocker on Saturday, but after step 1 the screen went black and it wont reboot.
I can get into bootloader (by pressing the camera button and the reset pin at the same time), but I can't install the OS from Activesync as the PC can't see the ameo.
I can also get to factory reset (by pressing the volume slider down and powering up), but I haven't done anything in there.
The bootloader shows Olipro SPL 1.2
At the same time as getting this sorted I thought I'd upgrade to WM6 from the posts that are here, but I can't find at all, how to get the ROM onto the ameo without Activesync seeing it.
Can someone point me in the right direction please?
Thanks for any help in advance.
Joe
Click to expand...
Click to collapse
Just out of curiosity, did you take your storage card out before you began the unlock?
not for me : no SD card , only microdrive
Nope, didn't realise I had to....
Is that the common factor in it failing?
Joe
seosamh1973 said:
Nope, didn't realise I had to....
Is that the common factor in it failing?
Joe
Click to expand...
Click to collapse
I don't think so, I don't have a memory card on my Ameo and had the same problem.. And when I told the Olipro **** that I got the black screen AND his SPL was flashed successfully, he kinda went frenzy about "IT IS NOT MY FAULT, IT IS YOURS! YOU ARE STUPID, I AM GOD!".. Nice support, huh?
Donate the mofo!
yes nice support indeed
TryOG said:
"IT IS NOT MY FAULT, IT IS YOURS! YOU ARE STUPID, I AM GOD!".. Nice support, huh?
Click to expand...
Click to collapse
I suggest people read the forum thread, I've been aware of the problem since day one after xmen's pda reset itself while running an unpatched SPL.
clearly you're a moron, or your english is ****, possibly both.
Olipro said:
I suggest people read the forum thread, I've been aware of the problem since day one after xmen's pda reset itself while running an unpatched SPL.
clearly you're a moron, or your english is ****, possibly both.
Click to expand...
Click to collapse
This guy refers to you...
Pantaloonie said:
I'm glad i'm not the only one who feels that way.
The man is obnoxious, arrogant and rude.
But hey - it's a public forum, he can say whatever he wants - as can I.
Click to expand...
Click to collapse
Just don't flame "stupid" people. And if someone asks for help: ignore, say that you won't help them or help them properly (without flaming).
Thnx.
And another thing.
You look *smart* and *cool* when you flame other people when they get problems and ask for help!!! (not)
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Olipro said:
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Click to expand...
Click to collapse
Thank you for this friendly answer... (I mean it)
Olipro said:
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Click to expand...
Click to collapse
Better,,, and sorta friendly.
What do you think about this little gem:
Pissed off == no reply @ the forums.
Cooled down == yeah, ok I can reply.
But then again, what do I know, eh?
Some people PAID you to hack/crack/mangle/otherwise play around with a Athena.
No, I didn't use any of your programs... I have had an unlocked Athena since day one. No, I will wait for the official Dopod release on the 20th (hopefully). If I see any bugs, HELL YES I will query the collective hive mind here.
But please, lay off the "I'm better than you" attitude. It doesn't do any good at all.
Olipro said:
OK... there's nothing I can do about it, if it black screens, please go and flash a ROM with an OS on it.
until I get hold of a new SPL, I do apologise for this unknown bug, but again, as I said, it's an intrinsic problem of 1.10.
Flash a ROM if it happens to you and it'll be fine. your device will NOT be bricked.
Click to expand...
Click to collapse
TryOG said:
Thank you for this friendly answer... (I mean it)
Click to expand...
Click to collapse
Alright guys! I do believe we can start all over, be nice & make progress! Let's try to enjoy our devices and appreciate each other.
Abram said:
Alright guys! I do believe we can start all over, be nice & make progress! Let's try to enjoy our devices and appreciate each other.
Click to expand...
Click to collapse
Yeah, let's bring the '70s back
TryOG said:
Yeah, let's bring the '70s back
Click to expand...
Click to collapse
70's ? you're a decade too late there...
fards said:
70's ? you're a decade too late there...
Click to expand...
Click to collapse
The 70's songs are less worse...
i'm in need of some help... i have had my wing for a few months now and i discovered all the beautiful f**kin things you can do with it but everytime i try to flash when it gets to the RUU my comp give me an error message that i need to check my update utility...whats the prob? am i missing something???
KnightmareWingHTC said:
i'm in need of some help... i have had my wing for a few months now and i discovered all the beautiful f**kin things you can do with it but everytime i try to flash when it gets to the RUU my comp give me an error message that i need to check my update utility...whats the prob? am i missing something???
Click to expand...
Click to collapse
Have you tried to Hard Spl first? When I first started out, I could use the uspl method one time, but I got all kinds of errors until I hard spl'd.
Errors still !!!
ok stupid question what is hardSPL? and how would i do it? still new to this... finally got the games to work.. i want to get different roms..but if i cant get past the damn flash its no use....any links i can try?
Welcome to xda developers.
I recommend you to read this thread
http://forum.xda-developers.com/showthread.php?t=369397
but if you are to lazy here is what to do to get hard-spl
http://forum.xda-developers.com/showthread.php?t=482296
|Thanx
thanks Zaknafein21.... the threads really explained alo... going ot try them tonight after work... hope this works... i'm tech savy in everything else but my friggin phone!!!
KnightmareWingHTC said:
thanks Zaknafein21.... the threads really explained alo... going ot try them tonight after work... hope this works... i'm tech savy in everything else but my friggin phone!!!
Click to expand...
Click to collapse
It will work if you follow the guides!
If not use the search, cause the problem was there before for sure *g*
pls help, i really dont know what to do with my fone. i have here htc t3238 jade 100 (but in the battery pack, it's "160") and the only problem is it's calibration...
i've tried to reset my phone so many time and the phone can't do it... it never goes on the "white screen" mode... then sombody told me about the rom which i really dont know... so please could anyone help me the step by step procedure how to fix this.... i just bought the fone slightly used and i'm not familiar with it... tnx a lot... im having a real big problem....
isnt the T3238 a clone?
The Jade should be a T3232...so you might have a fake.
i really don't know if this is a fake... and if that so.. could you please help me for any solution i should do... please please please...
it's been a while, a user posted the same issue as you did. it was no clone, and I do not know, how he solved his problem.
I know, I have sent him a reg-file with the calibration-data from my phone, but my suggestion was to return it to the service point to get it fixed, as it might have been a hardware-problem.
have a look at this thread, where you can also get the reg-file content:
http://forum.xda-developers.com/showthread.php?t=633831
but the big problem is the being "clone" of my device... tnx anyway.. and i'm still waiting for some help...
mhelaiskyzt said:
but the big problem is the being "clone" of my device... tnx anyway.. and i'm still waiting for some help...
Click to expand...
Click to collapse
hi
did u chek in the jade genral section i did see some thing regarding the clone their
heres the link :http://forum.xda-developers.com/showthread.php?t=662170
good luck
hello... i've already read that link before and that's what i did on my fone but on my dissapointment, the problem get worst.... my fone stuck in the start up mode unless i reset it via reset buttons... i hope somebody could help me about it...
mhelaiskyzt said:
hello... i've already read that link before and that's what i did on my fone but on my dissapointment, the problem get worst.... my fone stuck in the start up mode unless i reset it via reset buttons... i hope somebody could help me about it...
Click to expand...
Click to collapse
Dear
the problem is the solutions for the Jade dont work on the clone that is why i asked u to go to the clone thread sorry for ur problem hope some one helps u soon
mhelaiskyzt said:
hello... i've already read that link before and that's what i did on my fone but on my dissapointment, the problem get worst.... my fone stuck in the start up mode unless i reset it via reset buttons... i hope somebody could help me about it...
Click to expand...
Click to collapse
Mate, you can try a very SIMPLE Google Search "t3238 problems" and you will see a number of possible results.
Have a look at those, as this HTC JADE thread is NOT really for your Cloned Device.
Good Luck
This link may also help you, but read the posts in all 3 pages
http://forum.xda-developers.com/showthread.php?t=580367
Hi all
I have a problem here, is not serious but really annoying my eyes every time I restart my phone keep showing “test only not for sale” have any1 know how to remove it
It start to happen when I flash my rom to the Telstra rom
Thanks in advance
flattit4 said:
Hi all
I have a problem here, is not serious but really annoying my eyes every time I restart my phone keep showing “test only not for sale” have any1 know how to remove it
It start to happen when I flash my rom to the Telstra rom
Thanks in advance
Click to expand...
Click to collapse
flash a new radio!
i'm currently using the 2115020 and flash back to 2105008 but no luck still show up
helo
flash a new rom
or simple a new startup logo
http://forum.xda-developers.com/showpost.php?p=5519927&postcount=57 leo stock
it's the splash screen. use the link that appelflap gave you
Thanks alot
Sultan1993 said:
it's the splash screen. use the link that appelflap gave you
Click to expand...
Click to collapse
I believe the answer to my question is no, but I just want to confirm. Can I install the splash screen that appelflap provided on my T-Mobile USA 1024HD2? It has been HSPL. Thanks!
hi, my screen is freezed everytime.. i Formatted many times, i've done task 29 and changed a few radio but still its cannot unlock the screen..
A few times it opened but it cannot when i want..
and i couldnt find good radio Flasher..
Can someone tell me about flashers.. I think i need one "***.cfg" file and "customruu.exe" isnt it ??
when i try to flash its says for version is "2.00.0.00" something like that. is that right ? or false?
Thanks...
Please HELP !....
There isnt any similar thread on forum... I changed Radio, too ..
Still not work..
is your screens unresponsive?
yes, it never response but it works without problem maybe once a day... or in a few days..
SlyRder83 said:
is your screens unresponsive?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=993787
Your answers are there.
im following that thread..
I hope it works..
But i have to find better solution then change buttons or touch digitizer..
AngelDeath said:
http://forum.xda-developers.com/showthread.php?t=993787
Your answers are there.
Click to expand...
Click to collapse
Try to return Official Rom. It may be work.
i had the same problem with my old HD2 it completly became completely unresponsive so i got a new one. try not to ever press the red button!! lol