Hi,
I tired flashing udk syrius r0.
during the flash i got an error messege about the communication.
now my device is stuck in bootloader mode :
"pola100
spl-1.25.0000
cpld-2"
i am using vista ultimate.
i tired re-flashing 3 other roms but i can't because the device is not being recognized.
i tried using mtty but i keep getting "usb port can not open" no matter what i do. i tired uninstalling the mobile center and nothing helps.
i tried flashing through the microsd and its not working as well (its in "loading" for over 30 minutes.)
1. is my device bricked?
2. what do i need to do to get my device back ?
thanks in advance
Jam
That's happens because you don't read before, before flashing a non-Official ROM you need to install the Hard-SPL.
udK said:
That's happens because you don't read before, before flashing a non-Official ROM you need to install the Hard-SPL.
Click to expand...
Click to collapse
O.K. I'm a dumbass
how do I do that now?
or is my device bricked?
jamses said:
O.K. I'm a dumbass
how do I do that now?
or is my device bricked?
Click to expand...
Click to collapse
It is not bricked. You can repair it by yourself. Just use SEARCH function! Please do not ask questions that have been answered hundreds of times. It is really not polite to do that to people using these forums.
There are some sticked thread, take a look.
udK said:
There are some sticked thread, take a look.
Click to expand...
Click to collapse
Hi again,
i tried this threads...
http://forum.xda-developers.com/showthread.php?t=425922
http://forum.xda-developers.com/showthread.php?t=384084
http://forum.xda-developers.com/showthread.php?t=381600
nothing is working...
i am writing for help after i tried everything i can ...
please dont take this the wrong way but i need help recovering my device...
Just look the first sticky thread of polaris upgrading
JVRSilva said:
Just look the first sticky thread of polaris upgrading
Click to expand...
Click to collapse
i tried doing hard-spl flash but i can't see the "replug usb" message. the device immidietly moves to the progress bar and gets stuck with 0%.
can someone please help me...
try flashing an official rom
and after that flash hardspl
ravest said:
try flashing an official rom
and after that flash hardspl
Click to expand...
Click to collapse
wouldn't flashing an official rom after a custom rom brick my device ?
ravest said:
try flashing an official rom
and after that flash hardspl
Click to expand...
Click to collapse
That solved the problem !!!
YOU ARE A KING !!!
Related
Hi
what is problem , i can get only on bootloader mode my herald and nothing more.
i get phone on dead situation , so i'm trying to fllash but i can get nothing from this?
can anyone explain what's going on?
best.r
haveri said:
Hi
what is problem , i can get only on bootloader mode my herald and nothing more.
i get phone on dead situation , so i'm trying to fllash but i can get nothing from this?
can anyone explain what's going on?
best.r
Click to expand...
Click to collapse
When nothing works except bootloader - try to flash an original Rom with RUU.
look in the wiki.
And try.
papamopps said:
When nothing works except bootloader - try to flash an original Rom with RUU.
look in the wiki.
And try.
Click to expand...
Click to collapse
Yes yes before writte here on forum i have try much think about herald
Fllash has going just on 2% and then stoping.
how can i solve this problem?
best.r
haveri said:
Yes yes before writte here on forum i have try much think about herald
Fllash has going just on 2% and then stoping.
how can i solve this problem?
best.r
Click to expand...
Click to collapse
Which language does your Herald has - and what do you want to flash. You have to choose teh original RUU.
Does it give the "Vendor-ID error"??
papamopps said:
Which language does your Herald has - and what do you want to flash. You have to choose teh original RUU.
Does it give the "Vendor-ID error"??
Click to expand...
Click to collapse
Yes , give this "Vendor-ID error" (294)
I'm trying to flash with :RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship , this {RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship nothing , i dont know what language herald have before?
haveri said:
Yes , give this "Vendor-ID error" (294)
I'm trying to flash with :RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship , this {RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship nothing , i dont know what language herald have before?
Click to expand...
Click to collapse
Last chance. Try to flash ANY rom. Posted in the WIKI.
Good luck. When you don´t find one without given Vendor-ID error. You have to wait for the official HTC update.
You can add me to messenger if you use:
papamopps said:
Last chance. Try to flash ANY rom. Posted in the WIKI.
Good luck. When you don´t find one without given Vendor-ID error. You have to wait for the official HTC update.
You can add me to messenger if you use:
OK i'm trying all this flash that bee here
http://wiki.xda-developers.com/index.php?pagename=Herald_Upgrades
OK i have add your mail
Click to expand...
Click to collapse
Are there other methods to flash the rom of my Herald (than the official .exe)?
bayxsonic said:
Are there other methods to flash the rom of my Herald (than the official .exe)?
Click to expand...
Click to collapse
It's not really recommended unless you can find the same ROM that your phone has now on the Herald Wiki (so you can restore your ROM in case you brick your phone).
But if you still want to proceed, there's tons of info already in the forums.
Thank you... I'm been searching for a lot but...
Ok, tomorrow I'll call the Customer Service
bayxsonic said:
Thank you... I'm been searching for a lot but...
Ok, tomorrow I'll call the Customer Service
Click to expand...
Click to collapse
You can flash using Aserg's method.
http://forum.xda-developers.com/showthread.php?t=308891
Also here is another ROM
http://forum.xda-developers.com/showthread.php?t=318962
I got a bricked one by using the pdaviet rom...
bayxsonic said:
I got a bricked one by using the pdaviet rom...
Click to expand...
Click to collapse
I'm sure if you had read those entire two forums your phone would be working right now.
I've read the instructions on bottom of the post:
Extract file, copy ASerg Policies.CAB to PPC and Run it,then reboot driver.
Sync PPC to PC and run 1__UPGRADE_ROM.bat,Wait it 10-15 minutes.
Cheers..!
My unit is working fine..can make receieve calls etc...
Am running on Meschle's 2.11 lite....hard reset fine everything fine...
When I try to upgrade to the full version - Gives me error...Connection.check cradle etc...
Tried Official ROM - same problem
Tried Manual Bootloader - goes into a white screen and hangs...then after 4-5 minutes i see the colored screen with IPL 3.04.0001 and SPL 1.11.000...
if I reset goes back to the ROM that was there on it...works fine...
Did I just brick my phone?
Not that I am not happy with it...but then why the Bootloader and flashing is not working?
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
NikMel said:
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
Click to expand...
Click to collapse
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
hehe
nice
devdarshan said:
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
Click to expand...
Click to collapse
NikMel said:
nice
Click to expand...
Click to collapse
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
tongphan said:
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
Click to expand...
Click to collapse
NikMel said:
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
Click to expand...
Click to collapse
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
tongphan said:
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
Click to expand...
Click to collapse
NikMel said:
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
Click to expand...
Click to collapse
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
I can't tell you for sure if this procedure will work for your pda.
this works on artemis or p3300 or dopod p800
tongphan said:
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
Click to expand...
Click to collapse
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Arura said:
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
Click to expand...
Click to collapse
NikMel said:
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Click to expand...
Click to collapse
Found donate! link in the bar.
hehe OK
Arura said:
Found donate! link in the bar.
Click to expand...
Click to collapse
NikMel said:
hehe OK
Click to expand...
Click to collapse
I meant navigation bar!
Re: Bad Flash brick Pharos!
Hi,
Sorry for my Bad English
I bricked my Pharos!
I Have a problem!
I Made my Own Pharos rom with "jose_sonseca" Totorial!
The Tutorial is bad, now start my HTC Pharos only in the "smart mobility" screen.
No Rom ( My own createt rom ) not Loaded!
how i can enter the bootloader and reflash the bad rom?
The rom gang up in the "smart mobility" screen!
No Active Sync...
Edit: SPL: 1.11Mobiz!
The phone is only one day old... ;(
Please Help...
Thx
How i can enter the Bootloader mode?
How i can reflash my Pharos?!
Please help..
Lou
O.k!
The Answear is " Soft reset and Camera!"!
I Reflash it now!
did it work the second time?
avathar behemoth said:
did it work the second time?
Click to expand...
Click to collapse
If not, upload your part02.raw, and I will try to compile it.
avathar behemoth said:
did it work the second time?
Click to expand...
Click to collapse
Works great now...
jose_sonseca said:
If not, upload your part02.raw, and I will try to compile it.
Click to expand...
Click to collapse
Can you please Upload a German Rom with original Bootsplash?
Many Thx
LouTheDuke said:
Can you please Upload a German Rom with original Bootsplash?
Click to expand...
Click to collapse
I don't have it, but it's posted here -> http://forum.xda-developers.com/showthread.php?t=420216
For the original bootsplash, I don't think that german rom have it, so apply my original bootsplash, I've posted it here -> http://forum.xda-developers.com/showthread.php?t=412324
I'm just about to try and install the Syrius R0 ROM on my XDA Orbit II. Just wondering if there is anything I need to do first like SIM/ CID unlocking etc? If so how do I do it?
Cheers
mate, not being funny, but dont ask questions like that as full instructions are on the thread with the rom ( and you will be told to use the thread search tools, lol), and if you are asking questions like that it is highly not recomended to flash your device if you dont know what you are doing, hopefully i have got the wrong idea of what you meant, in any case,
click http://forum.xda-developers.com/showthread.php?t=425612 and follow instructions. you need to hard spl your device,
do hard reset first, then flash then hard reset and everything shoudl run smoothly, dont use vista if you do it wont work, well it didnt on mine, use an xp machine.
hope all works out for you!!
cid unlocking, check the hardspl thread here
The o2 Orbit 2 has no SIM/NET lock at all.
Just do Hard-SPL, if something goes wrong while flashing, you can recover it.
http://forum.xda-developers.com/showthread.php?t=351964
EDIT: too slow third...
SilverstarX said:
EDIT: too slow third...
Click to expand...
Click to collapse
lol
when i flashed hard spl on my device, i was using vista and it worked fine... just make sure you have a full connection between Mobile device center and your orbit.
joey jojo said:
lol
Click to expand...
Click to collapse
But all three simultaneously at 3:10 (GMT+2)
Ok, stop spamming
Vista is often causing errors. XP is recommended...
Cheers, I had read through the instructions etc but the XDA dev wiki says that before you find the ROM you should CID unlock the device, couldn't find anything explicitly saying that Hard SPL is doing this and figured I'd rather ask an obvious question than risk bricking by beloved Orbit II.
Think I might have to risk trying it with Vista, only XP installations I've got are VMware ones on Ubuntu and that's a whole other can of worms.
Thanks for the quick replies
First post and a new thread. Boring...............
there are already a thread for bug in R0 Syrius and explaination for flashing a new device use it before posting !!!!!!!!!!
This isn't about a bug in Syrius R0 and as I said before I had read two guides on here (wiki and the installation instructions) and was checking a difference between the two.
Lock and whipe this thread. Another idiot who didn't care to read the "read me first" threads....
I did read them, was checking a difference as explained in previous post. thankyou joey jojo for your help