any suggestion how i could perform softreset on touch dual?
Hold the on/off switch for 3 sec. (If that doesnt help remove battery.)
look like computer where it will shutdown the WM6. thanks....
atom528 said:
look like computer where it will shutdown the WM6. thanks....
Click to expand...
Click to collapse
You could also use the soft-reset button which is inconveniently located under the back cover. Take the cover off and you will find the soft-reset button just above the USB connector.
Or (if the phone is still responsible) use a softreset tool like ShutXP.
Many Taskmanagers also have this feature.
Related
Hi, after i installed pocket plus 3 in my 9100, it hangs, i do a soft reset and since then it always hangs in the boot screen.
Any1 can help me please¿?
Thx in advance
Thorete.
Thorete said:
Hi, after i installed pocket plus 3 in my 9100, it hangs, i do a soft reset and since then it always hangs in the boot screen.
Any1 can help me please¿?
Thx in advance
Thorete.
Click to expand...
Click to collapse
this is a known bug on 9100, I also had to HARD RESET. there was already such topic, find it, there is a solution there too. HARD reset by holdin the buttons on both upper sides (comm manager and voice command) - it will vibrate, then press and hold RESET button for 5 sec
I´m sorry, but when i press the 2 buttons it doesn´t vibrate, else i push the reset during 5 seconds but it is the same.
Sorry for my poor english...
Thorete said:
I´m sorry, but when i press the 2 buttons it doesn´t vibrate, else i push the reset during 5 seconds but it is the same.
Sorry for my poor english...
Click to expand...
Click to collapse
hmm, why don't you see in the printed manual, page 80. It reads:
To perform a hard reset
1. Press and hold the Comm Manager button and Voice Command
button on the device.
2. Keep the two buttons pressed, and at the same time, use the
stylus to lightly press and hold the RESET button.
worked for me?
Thx for the help.
I have read the manual, and i´m doing exactly it says.
The solution for me was:
1. Press and hold the Comm Manager button and Voice Command
button on the device.
2. Keep the two buttons pressed, and at the same time, use the
stylus to lightly press and hold the RESET button,
and the release the stylus and 2 seconds later release the 2 buttons.
Now i uninstalled the fu**ing Pocket plus.
ur not alone, it got me too.
Mine however would not hard reset, had to use the bootloader to re-flash the rom! The air was getting pretty blue......
Guys - you all just need to chill for a moment...
PocketPlus3 works beautifully with the wizard in all but one area - the Safe Mode.
For some reason the switch to WM5 buggers this up so what you need to do is this:
1) Install Pocket Plus 3 to your device.
2) Start > Settings > 'System' Tab > Spb Pocket Plus.
3) Scroll down the little list and uncheck the 'Safe Mode' box.
4) Soft-reset and be happy
Hope this helps!
435nk9 said:
Guys - you all just need to chill for a moment...
PocketPlus3 works beautifully with the wizard in all but one area - the Safe Mode.
For some reason the switch to WM5 buggers this up so what you need to do is this:
1) Install Pocket Plus 3 to your device.
2) Start > Settings > 'System' Tab > Spb Pocket Plus.
3) Scroll down the little list and uncheck the 'Safe Mode' box.
4) Soft-reset and be happy
Hope this helps!
Click to expand...
Click to collapse
Yes I also confirm that I have it running after the mentioned above problems . I think it is worth having, just uncheck the SAFE MODE box immediately after installing SPB and before any resets...
Oh oh, I am really in problems now. I think I have the same problem with Pocket Plus, and my MDA Vario does not start up any more. I only see the bootscreen. After doing a hard reset I see horizontal coloured bars and that's it???!!!!
HELP
How do I get out of this missery?
I use SPB PP + 3.0.4 with safe mode switched on without any problem. During boot is shows dialog what to do if you want safe mode (but i've never used safe mode yet) and device starts well.
anyone know why my mini ON/OFF button no function??then very strange thing is when i tick the RESET key will all HARD RESET!!!look like my ON/OFF button always been HOLD,after i felt like that, im take it test the ON/OFF button with the multitester but it no problem, isit that mean my mainboard is porblem? :?
if repair then very expensive? :shock:
or anyone know wat wrong isit?
Have warranty for your device?
www.cartystudios.com
just end of last mth
I had the same problem after I dropped it on the floor. I fixed it myself by open the case and put plastic button back on the switch.
jackleung said:
I had the same problem after I dropped it on the floor. I fixed it myself by open the case and put plastic button back on the switch.
Click to expand...
Click to collapse
can u discuss more details??im no surely understand what u mean??im open b4 that set and test + - with multitester that the ON/OFF switch is working, just dunno why it always like HOLD and i TICK RESET it fully give me HARD RESET!! :? then i try just press the camera button and RESET it go to bootloader moder .
im send back to repair center help me check what prob, but....haiz..my country o2 service technician so un-pro!!!Im flash my mini to chineseOS then it show DOPOD startup scr then he said my set oledi change mainboard to DOPOD BOARD!!!
then the technician is PRO or ?? :?:
ha ha, I also install Dopod Tradition Chinese rom on my Imate Jam.
What happen w/ yr machine are most likely the plastic button of the case goes into wrong place after drop (and I think it's a common problem of Magician since we are not the only 2 have this kind of problem after dropping it). The plastic button may slip and push to the on/off switch all the time. (And that's why we encounter a Hard-Reset everytime we do a Soft-reset beause Power + SoftReset = Hardreset)
So, just open yr case http://forum.xda-developers.com/viewtopic.php?t=44841 (look for disassembly.rar for instruction how to open the case) and make sure the button are in place
I'm new to Topaz. Every time I finish a phone call or a program, I need to wait for several seconds until the screen is turn off. In fact, I do not key lock my phone.
I wonder if there's any soft button (in any kind of program) can turn the screen off after I finish using the PDA phone?
Short press of the (hard) power button turns off the screen (but not the device). That's not satisfactory?
Hi jabok, thank you for yr reply and i noted the "hard" power button method. As the power button is located at the top of the phone and the button is a little bit difficult to press, in my opinion.
That's why I'm looking for a program or shortcut to have a "soft" button on-screen to turn off the screen
jabok said:
Short press of the (hard) power button turns off the screen (but not the device). That's not satisfactory?
Click to expand...
Click to collapse
Yes, you may try PSSHUTXP or SVMPOWERMGR. I am currently using SVMPOWERMGR which provides 4 shortcuts in Windows Start program and one of them is screen off.
black818pro said:
I'm new to Topaz. Every time I finish a phone call or a program, I need to wait for several seconds until the screen is turn off. In fact, I do not key lock my phone.
I wonder if there's any soft button (in any kind of program) can turn the screen off after I finish using the PDA phone?
Click to expand...
Click to collapse
You can use TouchLockPro and configure CommandCallEnded = !SUSPEND.
You can also couple a (hardware) key shortcut to TouchLockAction SUSPEND
Is there a simple, free app to soft reset my phone. I wonder who thought win mo had progressed to the point where an occasional soft reset would not be needed
You can use Advanced Configuration Tool:
Menu - Soft reset
MemMaid has the same option, but it is not free.
Get HD Tweak here, and you get a tweaker that can be used for settings, plus an HD Soft Reset app you can add to the start menu.
http://www.montecristoff.com/hdtweak.htm
Or check this topic.
There is also that little button on the side of the phone... Little hole. Use your stylus... says "RESET" Unless for some reason, that's not on all TP2s...
m4xx0rz said:
There is also that little button on the side of the phone... Little hole. Use your stylus... says "RESET" Unless for some reason, that's not on all TP2s...
Click to expand...
Click to collapse
I find it a pain I need to remove the back cover to do that. On my fuze (touch pro) I just had to use the stylus and I could push the reset button which was at the bottom of the phone.
Aaron McCarthy said:
I find it a pain I need to remove the back cover to do that. On my fuze (touch pro) I just had to use the stylus and I could push the reset button which was at the bottom of the phone.
Click to expand...
Click to collapse
... Am I being punk'd? Like, seriously... is the T-Mobile one some miraculous feat of engineering that they were able to put the reset button on the side of the phone? Seriously. Mine is on the right side... Are certain yours isn't on the side of the phone?
*edit* After doing a little more research, I found that for some reason, the TILT 2 has that behind the battery cover. Sorry for my response. I was seriously just flabbergasted...
yeah very stupid design flaw there... I was flabbergasted when I purchased it!
Windows Marketplace has an App called "Reboot" which is exactly what you're looking for.
http://forum.xda-developers.com/showthread.php?t=280010
google or forum search for psShutXP if the above link doesn't work.
Its a free cab that does soft resets. You hold the power buton for 2 secs and a menu pops up to either display off / turn off / soft reset or cancel.
Can't use just hold the power button for three seconds and tap yes at the dialog box to power off the phone then press the power button again to power on? This works for me on my tmo US phone.
Soft Reset made easy
I contacted HTC to ask the difference between a soft reset using the hard to reach reset button and just powering the TP2 off and then on. They said there was no difference and the red power button would perform a soft reset.
Obvious question then is "what is the reset button for?"
thaddyusmaximus said:
Can't use just hold the power button for three seconds and tap yes at the dialog box to power off the phone then press the power button again to power on? This works for me on my tmo US phone.
Click to expand...
Click to collapse
Theres a number of ways you can soft reset the phone.. from powering down the unit to navigating to a soft reset shortcut in the start menu to pressing the red reset button on the side of the phone.
I guess using the reset button on the side of the phone just became habit on the touch pro (fuze) so when I need to reset my mind automatically goes to popping off the cover so I can get at it EVEN though their are alternatives. I'm sure I'll get over it
ssilver said:
...Obvious question then is "what is the reset button for?"
Click to expand...
Click to collapse
Sure, powering off and then power on is the same as pressing the reset button. But consider this: what if your device freezes so badly that the power button is no longer responsive? The reset button is now your friend
(or you can pull the battery, but that's doesn't sound very safe to do)
That being said, HTC did a silly job putting the reset button under the battery cover. They should just hide it in the stylus slot like they did with the original Touch Diamond and the Touch Pro.
xdaShutdown
Mate,
Check out this.
xdaShutdown a beautiful application...already in the first sticky thread of this section
yogam1
HD tweak is a tweak program like the Advanced Config tool that has a built in soft reset with it. It is free and is on this forum. Has many other uses as well.
Here Try this, made a cab from Josh Koss's rom. This will place an icon in the start menu that will reboot the device when pressed
u can also use the htc clean ram app i never soft reset my tp2 i just clean the ram @ level 3 twice a day try it ul love it
I prefer Slide 2 Shutdown the best... It gives you the option to Slide to Power off your phone, Slide 2 Reset your phone, or Slide 2 Sleep... Pretty cool UI...
hiz buddy my i mate jam windows is crupped i want to reinstall the windows can anyone help me or guide me how to format & install new windows in my i mate jam i waiting replay of all
best regards
sheeraz ahmed
Try a hardreset:
Hold the power and camera button while putting the stylus into the little hole in the bottom.
This also deletes everything saved on the Device itself.
header2k said:
Try a hardreset:
Hold the power and camera button while putting the stylus into the little hole in the bottom.
This also deletes everything saved on the Device itself.
Click to expand...
Click to collapse
You just need to hold the power button if you want a hard reset.
Holding both will go to Bootloader mode (mode for upgrading rom).
Cheers,
Philip
Mod. edit: not dev related, moved to general