Database Users

Qtek 9100 always hangs in boot screen

Hi, after i installed pocket plus 3 in my 9100, it hangs, i do a soft reset and since then it always hangs in the boot screen.
Any1 can help me please¿?
Thx in advance
Thorete.

Thorete said:
Hi, after i installed pocket plus 3 in my 9100, it hangs, i do a soft reset and since then it always hangs in the boot screen.
Any1 can help me please¿?
Thx in advance
Thorete.
Click to expand...
Click to collapse
this is a known bug on 9100, I also had to HARD RESET. there was already such topic, find it, there is a solution there too. HARD reset by holdin the buttons on both upper sides (comm manager and voice command) - it will vibrate, then press and hold RESET button for 5 sec

I´m sorry, but when i press the 2 buttons it doesn´t vibrate, else i push the reset during 5 seconds but it is the same.
Sorry for my poor english...

Thorete said:
I´m sorry, but when i press the 2 buttons it doesn´t vibrate, else i push the reset during 5 seconds but it is the same.
Sorry for my poor english...
Click to expand...
Click to collapse
hmm, why don't you see in the printed manual, page 80. It reads:
To perform a hard reset
1. Press and hold the Comm Manager button and Voice Command
button on the device.
2. Keep the two buttons pressed, and at the same time, use the
stylus to lightly press and hold the RESET button.
worked for me?

Thx for the help.
I have read the manual, and i´m doing exactly it says.
The solution for me was:
1. Press and hold the Comm Manager button and Voice Command
button on the device.
2. Keep the two buttons pressed, and at the same time, use the
stylus to lightly press and hold the RESET button,
and the release the stylus and 2 seconds later release the 2 buttons.
Now i uninstalled the fu**ing Pocket plus.

ur not alone, it got me too.
Mine however would not hard reset, had to use the bootloader to re-flash the rom! The air was getting pretty blue......

Guys - you all just need to chill for a moment...
PocketPlus3 works beautifully with the wizard in all but one area - the Safe Mode.
For some reason the switch to WM5 buggers this up so what you need to do is this:
1) Install Pocket Plus 3 to your device.
2) Start > Settings > 'System' Tab > Spb Pocket Plus.
3) Scroll down the little list and uncheck the 'Safe Mode' box.
4) Soft-reset and be happy
Hope this helps!

435nk9 said:
Guys - you all just need to chill for a moment...
PocketPlus3 works beautifully with the wizard in all but one area - the Safe Mode.
For some reason the switch to WM5 buggers this up so what you need to do is this:
1) Install Pocket Plus 3 to your device.
2) Start > Settings > 'System' Tab > Spb Pocket Plus.
3) Scroll down the little list and uncheck the 'Safe Mode' box.
4) Soft-reset and be happy
Hope this helps!
Click to expand...
Click to collapse
Yes I also confirm that I have it running after the mentioned above problems . I think it is worth having, just uncheck the SAFE MODE box immediately after installing SPB and before any resets...

Oh oh, I am really in problems now. I think I have the same problem with Pocket Plus, and my MDA Vario does not start up any more. I only see the bootscreen. After doing a hard reset I see horizontal coloured bars and that's it???!!!!
HELP
How do I get out of this missery?

I use SPB PP + 3.0.4 with safe mode switched on without any problem. During boot is shows dialog what to do if you want safe mode (but i've never used safe mode yet) and device starts well.

Please help, I can't read text msg and url after open...

Hi,
Please give me a hand...
I can read text messages' headline only, but I can't read the contents.
Whenever I touch any headline, which shows blank.
Actually it's empty (white screen without format).
And IE was happening as the same case also.
Sigh...
I recently installed a trial version software as a cleaner for release more memories.
I deleted some files and let main memory of 13% free,
but I'm feeling so bewilder that I have making a quite mistake.
I couldn't read webpages on ie and couldn't read any text messages on mailbox,
after I deleted "some lnk files", "the whole directory of GPRS MONITOR
in My Device\Program Files\" on my O2 Atom.
Could any one help me to solve my problem, please? :?

You have to try to reset your device.
Have you tried the soft-reset of your device ?
If that does not work you will have to do a HARD reset.
For soft reset, press the small recessed button at the bottom of the Atom.
For HARD reset (you will lose all your data, but at least you will get back a working Atom), with the Atom OFF, press the small recessed button at the bottom of the Atom AT THE SAME TIME press the power button at the top.
You will be prompted for hard reset press BOTH the CALL and HANGUP buttons.
Last option : Reflash yor ROM.

Re: You have to try to reset your device.
Experimenter said:
Have you tried the soft-reset of your device ?
If that does not work you will have to do a HARD reset.
For soft reset, press the small recessed button at the bottom of the Atom.
For HARD reset (you will lose all your data, but at least you will get back a working Atom), with the Atom OFF, press the small recessed button at the bottom of the Atom AT THE SAME TIME press the power button at the top.
You will be prompted for hard reset press BOTH the CALL and HANGUP buttons.Last option : Reflash yor ROM.
Click to expand...
Click to collapse
:wink: Thanks for your kind reply.
I've already tried soft reset it for many times before I post this message. :?
:roll: I made the hard reset at last....
You're right, at least I can recover my Atom.

help me in reseting phone

hey guys, please help me...i bought imate jam used one form some of my frnd...now i want to hard reset ...can anyone tell me how can i do that...and one more thing lets say i hard reset it, will it setup automatically or do i have to put everything on my behalf....please help me....

Push the bottom button and quickly hold the Power button
If that doesn't work, try the other buttons. I think it is the power button.
It will setup and runs nicely as a phone. No worries.

Yup,
Its the power button. Hold your power button and soft-rest your device for a Hard reset. Yu will then be prompted with a screen saying your device will be customized automatically in 3secs. If you want to save space, skip that by a soft-reset again.
Regards
Carty..

Hard Reset on HD

Hello
Does anyone know how to do a Hard Reset on HD?
Regards

Hold both volume buttons and press and release the power button I think!

Hi, most HTC using this step
press and hold : 1 Call-key , hangup-key, and power-key
2 then then click yes need hold power
3 black screen, press power again will as for hard reset
hope that help

Oh and phone has to be off to.

page 278 in the manual
To perform a hard reset
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel.
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.

Ladies and Gents,
Now that I have been playing with mine for the best part of 24hrs :-D I can confirm that the best way to do a hard reset is to not bother with the holding down of the volume keys and quickly hitting the on / off button - this didn't work for me ONCE!!
It is however possible if you select the CLEAR STORAGE option in the settings menu and key in 1234.
Works perfectly.
Good luck, and enjoy your HD
MobileMerlin

Hi,
I need to wipe my HD - it's going back and I'm getting a replacement (original has dead pixels).
Does the Clear Storage actually clear everything like a hard reset?
Also - does this wipe the SD card?

hard reset will not wipe your storage card. It will however wipe your device storage.

Clear storage will do exactly the same thing as a hard reset. It sends your device back to the time it came out of the box for the 1st time.
It leaves your mem card alone.

Cool - thanks for the prompt replies!
I suppose another solution would be to remove the SD card before wiping!
Hope the replacement is ok -then I can start putting my apps back!

Here a Youtube Video how it works:
http://de.youtube.com/watch?v=Eqg8XFJyHBY
Hard Reset:
Power on the Device
Remove Accu Cover
Hold Volume Up and Volume Down Buttons
press the Reset Button on the Back of teh Device for 3-5 Seconds (where the Micro-Sd Card is)
following the text on the screen

kerni said:
Here a Youtube Video how it works:
http://de.youtube.com/watch?v=Eqg8XFJyHBY
Hard Reset:
Power on the Device
Remove Accu Cover
Hold Volume Up and Volume Down Buttons
press the Reset Button on the Back of teh Device for 3-5 Seconds (where the Micro-Sd Card is)
following the text on the screen
Click to expand...
Click to collapse
Thanks Mate I have just tried it and It works perfectly. Although you have to be slight quick because the actual volume button are on the cover. You know what I mean.
EDIT: You can just turn off the phone press the volup and voldown button and press the power button it will go for hard reset. No need for opening back cover.

sumitescp said:
thanks mate i have just tried it and it works perfectly. Although you have to be slight quick because the actual volume button are on the cover. You know what i mean.
Edit: You can just turn off the phone press the volup and voldown button and press the power button it will go for hard reset. No need for opening back cover.
Click to expand...
Click to collapse
solution work
good
thx

Thanks!!!!very useful......

Thanks kerni
It's work.

thanks for hard reset

so, if clear storage is the same as hard reset, why do people still bother with the hard way of hard reset?

dan138zig said:
so, if clear storage is the same as hard reset, why do people still bother with the hard way of hard reset?
Click to expand...
Click to collapse
Clear Storage requies Windows Mobile to be running.
Hard reset provides the same function at a hardware level - i.e. you don't need Windows running...

Please Help ?? Someone ?? I did the Volume up+volume down+power button and it displays the colors and it just stays there,it says only htc blackstone led etc... message but doesn`t go any further to the deleting thing. Anyone can help me ?? What`s wrong with it ? Thanks a lot !!

djspoti said:
Please Help ?? Someone ?? I did the Volume up+volume down+power button and it displays the colors and it just stays there,it says only htc blackstone led etc... message but doesn`t go any further to the deleting thing. Anyone can help me ?? What`s wrong with it ? Thanks a lot !!
Click to expand...
Click to collapse
If your phone does not reboot even after a hard reset I would try flashing a different rom. Would start by restoring stock rom first then using Dummies Guide top flash custom rom

Soft Reset a TP2

Is there a simple, free app to soft reset my phone. I wonder who thought win mo had progressed to the point where an occasional soft reset would not be needed

You can use Advanced Configuration Tool:
Menu - Soft reset
MemMaid has the same option, but it is not free.

Get HD Tweak here, and you get a tweaker that can be used for settings, plus an HD Soft Reset app you can add to the start menu.
http://www.montecristoff.com/hdtweak.htm

Or check this topic.

There is also that little button on the side of the phone... Little hole. Use your stylus... says "RESET" Unless for some reason, that's not on all TP2s...

m4xx0rz said:
There is also that little button on the side of the phone... Little hole. Use your stylus... says "RESET" Unless for some reason, that's not on all TP2s...
Click to expand...
Click to collapse
I find it a pain I need to remove the back cover to do that. On my fuze (touch pro) I just had to use the stylus and I could push the reset button which was at the bottom of the phone.

Aaron McCarthy said:
I find it a pain I need to remove the back cover to do that. On my fuze (touch pro) I just had to use the stylus and I could push the reset button which was at the bottom of the phone.
Click to expand...
Click to collapse
... Am I being punk'd? Like, seriously... is the T-Mobile one some miraculous feat of engineering that they were able to put the reset button on the side of the phone? Seriously. Mine is on the right side... Are certain yours isn't on the side of the phone?
*edit* After doing a little more research, I found that for some reason, the TILT 2 has that behind the battery cover. Sorry for my response. I was seriously just flabbergasted...

yeah very stupid design flaw there... I was flabbergasted when I purchased it!

Windows Marketplace has an App called "Reboot" which is exactly what you're looking for.

http://forum.xda-developers.com/showthread.php?t=280010
google or forum search for psShutXP if the above link doesn't work.
Its a free cab that does soft resets. You hold the power buton for 2 secs and a menu pops up to either display off / turn off / soft reset or cancel.

Can't use just hold the power button for three seconds and tap yes at the dialog box to power off the phone then press the power button again to power on? This works for me on my tmo US phone.

Soft Reset made easy
I contacted HTC to ask the difference between a soft reset using the hard to reach reset button and just powering the TP2 off and then on. They said there was no difference and the red power button would perform a soft reset.
Obvious question then is "what is the reset button for?"

thaddyusmaximus said:
Can't use just hold the power button for three seconds and tap yes at the dialog box to power off the phone then press the power button again to power on? This works for me on my tmo US phone.
Click to expand...
Click to collapse
Theres a number of ways you can soft reset the phone.. from powering down the unit to navigating to a soft reset shortcut in the start menu to pressing the red reset button on the side of the phone.
I guess using the reset button on the side of the phone just became habit on the touch pro (fuze) so when I need to reset my mind automatically goes to popping off the cover so I can get at it EVEN though their are alternatives. I'm sure I'll get over it

ssilver said:
...Obvious question then is "what is the reset button for?"
Click to expand...
Click to collapse
Sure, powering off and then power on is the same as pressing the reset button. But consider this: what if your device freezes so badly that the power button is no longer responsive? The reset button is now your friend
(or you can pull the battery, but that's doesn't sound very safe to do)
That being said, HTC did a silly job putting the reset button under the battery cover. They should just hide it in the stylus slot like they did with the original Touch Diamond and the Touch Pro.

xdaShutdown
Mate,
Check out this.
xdaShutdown a beautiful application...already in the first sticky thread of this section
yogam1

HD tweak is a tweak program like the Advanced Config tool that has a built in soft reset with it. It is free and is on this forum. Has many other uses as well.

Here Try this, made a cab from Josh Koss's rom. This will place an icon in the start menu that will reboot the device when pressed

u can also use the htc clean ram app i never soft reset my tp2 i just clean the ram @ level 3 twice a day try it ul love it

I prefer Slide 2 Shutdown the best... It gives you the option to Slide to Power off your phone, Slide 2 Reset your phone, or Slide 2 Sleep... Pretty cool UI...