Can someone help me on my imate sp3i
I did HARD RESET and somehow it stoped in half and now i can not open it on Windows and i can not update with a new rom,
anyone would like to help me ....
waiting for answer
thank you
try to flash any firmware to the phone should solve the problem
i-mate sp3
richardyiu said:
try to flash any firmware to the phone should solve the problem
Click to expand...
Click to collapse
I have i-mate sp3i. I was able to flash the ROM to now WM6, just a problem with camera is malfunction.
Click on this link and follow step by step. Should work for you.
http://karhoe.byethost33.com/content/view/35/1/
Related
Hello,
I wanted to upgrade my MDA Compact 2 to AKU3.
I started the update tool, like described in the forum here. The progressbar
on my MDA screen appears and when 95% are reached the update tool give me the ERROR [302]: UPDATE ERROR.
The reset of my MDA gives me only the 3color Boot-Loader Screen with the following Numbers:
IPL 2.06.0001
SPL 3.08.0001
and RUU in the right top corner.
Has anyone an idea to solve this problem, an downgrade to the old AKU2 can also not be done, because i get always the error about an wrong vendor ID.
I read a thread, to unlock CID, but this is not possible in Bootloader Mode, or?
thanks
Michael
SOLVED
Hello,
I solved my problem!!
I installed the Radio ROM Upgrade:
ftp://[email protected]/Uploads/Prophet/Prophet-roms/Radio_ROMs/Prophet_G3_G4_RadioRom_v2.69.21.exe
and it works.
There is maybe at 95% the Radio ROM Upgrade, and this worked not with the AKU 3.3 Image.
greets
Michael
I have the same issue. It's asking me for a password when I click on your link.
@optical, read the FAQ
@mwulz, thanks a lot ;-)
I got the same Problem. Does the link also work with the T-Mobile MDA Vario?
I don't want to crash my MDA Vario...
Thanks in advance
No, it won't help you. It's the radio rom, so it will not fit your wizard. You can try to flash any radio rom for wizard or any splash.
@mwulz
Thanks to you, I had the same problem (95% Error) and my mda compact II stoped working. With your tipp it works again!
Markus
mwulz said:
Hello,
I solved my problem!!
I installed the Radio ROM Upgrade:
ftp://[email protected]/Uploads/Prophet/Prophet-roms/Radio_ROMs/Prophet_G3_G4_RadioRom_v2.69.21.exe
and it works.
There is maybe at 95% the Radio ROM Upgrade, and this worked not with the AKU 3.3 Image.
greets
Michael
Click to expand...
Click to collapse
I have the same error on my Charmer with the AKU3.3, downloaded from the German T-mobile HP. Now I want to solve the problem with your described Radio-Rom but it is not downlodable from ftp://[email protected]/Up...adio_ROMs/Prophet_G3_G4_RadioRom_v2.69.21.exe !! What can I do??
it is downloadable, just type in password "xda".
thanks.
my charmer is in life again
HI,
I had spent lot of time searching for WM6 ROM for my imate ,while doing that I came across Qtek ROM namedas WM6 . After installing i came to know that it was a WM5 rom named as WM6. But i didnt gave up and after searching XDA i got actual WM6 rom and I uploaded it. The Version details of WM6 are :
ROM version 4.0.0.0 WWE
ROM Date 2/15/07
Radio Cersion 02.47.21
Protocol Version 4.1.13.24
Ext ROM version 4.0.0.0.3 PDAViet
But now i want to downgrade back to Imate WM5 original ROM. Kindly help me getting that done.
Thanks in advance..
Regards,
KD
i have a JaMin 2 and i wasn't able to downgrade to the original I-mate Rom but u can downgrade to the NoID WM5 which is better than I-mate Rom
the link for the NvID Rom
The below link is for the New I-mate bootlogo
http://forum.xda-developers.com/showthread.php?t=349635
Hoping this will work for u
Thanks for such a quick reply. Also i would like to know what are the steps to be folowed whiles downgrading. I mean do i run NoID ROM first and then execute Enterbootloader.exe and then Romupdate utility for my G4. Kindly excuse if u find my questions silly, since i have not much knowledge into all this and i am only being concerned about my Imate.
Cheers and thanks in advance
KD
I have the same problem...I cannot hear anything or any body can not hear me...But the thing is that the speaker does play the ringtone when sombody is calling me so the speaker is ok...PLz help..
invercargill said:
I have the same problem...I cannot hear anything or any body can not hear me...But the thing is that the speaker does play the ringtone when sombody is calling me so the speaker is ok...PLz help..
Click to expand...
Click to collapse
i also face the same problem, my rom is WM6 fantastic b4, but after few times hard reset and soft reset and leave it for overnight all back to normal again... sometimes still cannot hear the caller voice.. i just soft reset again..... still no permanent solution yet...
one of the senior member suggested to re flash the ROM... but i'm still not sure how to do it
To downgrade to WM5, follow this.
WM6 and WM5 for I-mate Jamin
Please I have I-mate jamin
I need WM5 and WM6 for it please
also if anyone have it's arabic version ..it will be better
if it's not avilable, I need it's english one
I tried many links but it is all expired or "file cant be found"
please help
thanks alot
Hi,
in my o2 atom exec the imei number and the radio number are missing is there any way by which i can get back them presently it says not ready in the system info.
Thanks
reddy6980 said:
Hi,
in my o2 atom exec the imei number and the radio number are missing is there any way by which i can get back them presently it says not ready in the system info.
Thanks
Click to expand...
Click to collapse
think you flash it to the wrong ROM or there is a bug on that ROM.
what ROM version/info that you use now?
probably you use ATOM ROM to flash it to ATOM EXEC.
I think its the atom exec ROM only,but in any case i tried ur version of WM6 while installing it says c:/windows/temp failed and it stopped there any suggestions on installing ur ROM on to it
reddy6980 said:
I think its the atom exec ROM only,but in any case i tried ur version of WM6 while installing it says c:/windows/temp failed and it stopped there any suggestions on installing ur ROM on to it
Click to expand...
Click to collapse
make sure you copy all the files into c:\windows\temp and the DSUU will ok in XP, do you Vista? if yes then read XDA-Wiki to install the rom via sd-card. (becareful)
hi chartreux,
copied ur exe to c/windows/temp and installed wm6 but the problem is when the STEP 5 Radio flashing comes it doesn't go further then this step it is always in 0%
is there any way i can install the radio
it will be very helpful if u give me any solutions
thanks
Browsed through the whole forum but did not get any answers for this problem anyone please help is there any way by which i can only update the radio or is it a hardware problem,
o2 guys in india r not helpfull at all
thanks
Need imate jam PM10A (ROM VERSION- 1.12.00 WWE) rom upgrade .
welcome...
It should be on the FTP... Be careful though - i damaged my magician with that rom, though i was flashing off of Vista and that was over a year ago... Also, apparently, 1.12 is only for SOME magicians, cant remember which, but don't quote me on that
why not go for 1.13?
Thank you iceblade911.Where can i get 1.13 ,please post the link.
imate jam prob.
hi friends,
i hve got an imate jam. i was trying to upgrade my ppc rom and download the latest one rom update from the clubimate.com. i have windows vista and when i was updating it so in the middle it gave me that a connection error. although the mobile was correctly connected to the pc via usb. when i saw the screen of my mobile so there was USB written and nothing else. so now when ever i restart my ppc by removing its back so it resets and i cant do any thing to bring it to its original position.
i dont want any upgrade but i want my ppc back. as normal.
can any one pleaseeeeeeeeeeeeee help me
i wud be very very very thankful.
my email address is.
[email protected]
update problem answer
just do it again that iamte jam rom update to 1.12..............got to imate.com and download jam_update1.12
Not to worry mate.
Hi Zabih,
Not to worry. I have not personally tested with Windows Vista so, if you can use Windows XP, it would be great.
There is a special button sequence to bring the I-Mate to a Factory install mode. Then you will be able to flash the ROM again.
I can't find the sequence at the moment, but drop me an e-mail and I will surely come back to you.
[email protected]
hello sir qaseemax
i do have the same problem when i tried to upgrade my imate jam and i am using an xp.... can you help me pls,,,
hope to hear from you soon
thanks a lot.... here is my email... [email protected]
In 2014!
Hey,
Is anyone still using their JAM? It's a lovely device and mine is still working. I was looking for some ROM upgrades. Directions, anyone?
Thanks!
Hello Fellows,
i need ur help...i got I-mate Jam...and i recently updated it to Cotulla wm6.1 Professional,i m facing a problem of automatic shutdown and no radio.....i hav searched alot at this forum and also at google bt didnt get the suitable radio...anyways i live in Pakistan and want to get a proper radio.....and yes i saw on youtube a man is using Manila 2d at his I-mate Jam....can u ppls plz tell me how to get that????
i really appreciate ur help....Thnks
Is there in no 1 who can help me???
Cotulla says
*You must have installed 1.12 or 3.00+ radio.If not, install it first, RADIO NOT INCLUDED INTO RAR!
Click to expand...
Click to collapse
I ve get the radio rom by an Update bevor with the original latest software from my provider.
and where i can get this radio....i saw imate jam on xda wiki....i downloaded
OS 1.13.01 / ExtROM 1.13.129 / Radio 1.12
this from there.....and followed the instructions bt i m not able to install on jam in windows 7....and i dont know the acutall radio that work with me......
if u can help me out at this i will be very thankful to U
It works under Windows 7 . I make it like here
http://forum.xda-developers.com/showthread.php?t=622768
Click to expand...
Click to collapse
thread "6"
"Was muß ich bei Vista/Windows7 32/64 beachten". Its in German ,but easy to understand. Of course of your own risk !
You can change the Driver when switch the device in Bootloader Mode and connect to PC.
Camera+Power+reset. Then Step by Step change the driver from "Windows7" to Driver which is in "active sync" dowloaded.
I flashed with this a Magician, a Wizard and a Blu Angel without Problems. But carefull ! Follow all Steps !
problem I-mate JAM
please help me is dark screen and write down v1.02 USB not know what I could do please send me a pm with what I can do thanks
if you open it and remove your USB settings to touch them are starting to install programs ... not give their restart and still finish as I have stated above screen USB / Serials
To change the USB Driver , Magician must be in Bootloader Mode (Camera+Power+reset ) Then you make the procedur like in the manual i gave you and change the USB Driver from Win7 to Driver from active sync .
Use MaupgradeNoID.exe for Update.
how to install wm6 or android on imate jam
hi this is ansari
i too want to install windows mobile 6 on my imate jam
please help how to proceed , after installing that i want android to be installed
i need it asap please
thank you