The Wizard unlocker is not workinf for Qtek S200, anyone know why? and how we can do it?
what error?
did you try to run the enablerapi.cab first on your device (file is in the other post)
why Lokiwizb can not unlock my Qtek S200,
IPL:2.09
SPL:2.09
OS:2.9.7.24
ERROR: ITWriteDisk - An internal error occurred.
the same error on the XDA Neo !!! (german rom, IPL/SPL 2.09)
**** !!!
seems cannot unlock the device with SPL 2.XX.....!!!
and also the ROMUpdateUtility_Wizard_NoID.exe also not working on it!!!!!
Same here (I pretty mad about this!) :twisted:
OS: 2.9.7.24 WWE
Why couldn't HTC leave it open? Just stuck with extrom2 options... although I can´t seem to write/replace anything in there!
G.
i have same problem
I`ve trying to unlock CID,but have same problem like you,somebody help?
Same problems for me to. Anybody nows about a fix for this problem??
Just having registered in this forum, what are the chances that new ROMs can be loaded onto this device? I'm trying to decide between the s200 and the Jamin. Given the track record af as other devices are concerned, it would seem that it may be likely. But, just thought I'd throw out the question....
floepie said:
Just having registered in this forum, what are the chances that new ROMs can be loaded onto this device? I'm trying to decide between the s200 and the Jamin. Given the track record af as other devices are concerned, it would seem that it may be likely. But, just thought I'd throw out the question....
Click to expand...
Click to collapse
Hey Floepie... welcome to xda-dev
Until now... I am not convinced the qtek s200 was as "open" as I had hoped for.
I personally get the "invalid vendor id" for ALL tried ROMs, and I still can't remove the CID. Starting to get pi.... off :!:
Someone ... PLEASE help!!!
G.
Nobody?
Why,HTC do this?For fun? :evil:
Nobody can help :?:
LAST TIME I GO WITH HTC
Still nothing!
I have lost faith. HTC and qtek must be complete morons, if this is the case! I bought my phoen thru expansys.com, and seem to be unable to get any proper support, and I fell pretty sure HTC and qtek are to blame for this mess.
I for one, will never buy HTC again, unless someone can prove me wrong. Sorry to say.
My considerations,
G.
It's not HTC, but Qtek!
I have buy a new Imate JAMin again, and have unlock it wit wizard unlocker and it works great!
I flash a Danish rom for Qtek S200, and thats works fine, but when I try to unlock the phone again, I've get the write error!
So Qtek have made the write protection, not HTC.
Are there anybody ho could fix this issue??
Re: It's not HTC, but Qtek!
dubbi said:
I have buy a new Imate JAMin again, and have unlock it wit wizard unlocker and it works great!
I flash a Danish rom for Qtek S200, and thats works fine, but when I try to unlock the phone again, I've get the write error!
So Qtek have made the write protection, not HTC.
Are there anybody ho could fix this issue??
Click to expand...
Click to collapse
Does this mean that if we have a Dopod 818 Pro/JAMin and flashed it to ANY Qtek roms, we will forever be stuck to Qtek roms???!!! :shock:
Re: It's not HTC, but Qtek!
linux2001 said:
dubbi said:
I have buy a new Imate JAMin again, and have unlock it wit wizard unlocker and it works great!
I flash a Danish rom for Qtek S200, and thats works fine, but when I try to unlock the phone again, I've get the write error!
So Qtek have made the write protection, not HTC.
Are there anybody ho could fix this issue??
Click to expand...
Click to collapse
Does this mean that if we have a Dopod 818 Pro/JAMin and flashed it to ANY Qtek roms, we will forever be stuck to Qtek roms???!!! :shock:
Click to expand...
Click to collapse
Until somebody have fix this issue I must use the Qtek rom in Danish (but that's no problem, Danish is almost like norwegian languge!
Hi Guys,
I have a Dopod 818 Pro with the original released ROM.
Then, I flashed it with JAMin_WWE_2130923_21309112_020720,
then, Qtek_WWE_2090724_20907106_020720
then, with the lastest JAMin ROM
JAMin_WWE_2130923_2139123_022021.
So, my Dopod 181 Pro has been flashed with Qtek ROM and then with JAMin ROM without any problem.
Not sure if it is my device or something I messed with my device
Anox.
anox said:
Hi Guys,
I have a Dopod 818 Pro with the original released ROM.
Then, I flashed it with JAMin_WWE_2130923_21309112_020720,
then, Qtek_WWE_2090724_20907106_020720
then, with the lastest JAMin ROM
JAMin_WWE_2130923_2139123_022021.
So, my Dopod 181 Pro has been flashed with Qtek ROM and then with JAMin ROM without any problem.
Not sure if it is my device or something I messed with my device
Anox.
Click to expand...
Click to collapse
I flash with RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship.exe
when you upgrade to qtek IPL and SPL is up from 1.xx to 2.xx and you can unlock 2.xx. You must use JAFWM to flash.
Hi there, maybe anyone out there can help me. I did an update with the newest german Rom Update for the Prophet to the Charmer, because a read that it worked for someone. Well, update works, but after reboot there's only the startscreen of O2 with the 4 red numbers, and then nothing happens...
What can I do?
Greetz B.
lol, sorry but that was a stupid thing to do!
try getting it into bootloader to reinstall the original rom
HI,
I had spent lot of time searching for WM6 ROM for my imate ,while doing that I came across Qtek ROM namedas WM6 . After installing i came to know that it was a WM5 rom named as WM6. But i didnt gave up and after searching XDA i got actual WM6 rom and I uploaded it. The Version details of WM6 are :
ROM version 4.0.0.0 WWE
ROM Date 2/15/07
Radio Cersion 02.47.21
Protocol Version 4.1.13.24
Ext ROM version 4.0.0.0.3 PDAViet
But now i want to downgrade back to Imate WM5 original ROM. Kindly help me getting that done.
Thanks in advance..
Regards,
KD
i have a JaMin 2 and i wasn't able to downgrade to the original I-mate Rom but u can downgrade to the NoID WM5 which is better than I-mate Rom
the link for the NvID Rom
The below link is for the New I-mate bootlogo
http://forum.xda-developers.com/showthread.php?t=349635
Hoping this will work for u
Thanks for such a quick reply. Also i would like to know what are the steps to be folowed whiles downgrading. I mean do i run NoID ROM first and then execute Enterbootloader.exe and then Romupdate utility for my G4. Kindly excuse if u find my questions silly, since i have not much knowledge into all this and i am only being concerned about my Imate.
Cheers and thanks in advance
KD
I have the same problem...I cannot hear anything or any body can not hear me...But the thing is that the speaker does play the ringtone when sombody is calling me so the speaker is ok...PLz help..
invercargill said:
I have the same problem...I cannot hear anything or any body can not hear me...But the thing is that the speaker does play the ringtone when sombody is calling me so the speaker is ok...PLz help..
Click to expand...
Click to collapse
i also face the same problem, my rom is WM6 fantastic b4, but after few times hard reset and soft reset and leave it for overnight all back to normal again... sometimes still cannot hear the caller voice.. i just soft reset again..... still no permanent solution yet...
one of the senior member suggested to re flash the ROM... but i'm still not sure how to do it
To downgrade to WM5, follow this.
WM6 and WM5 for I-mate Jamin
Please I have I-mate jamin
I need WM5 and WM6 for it please
also if anyone have it's arabic version ..it will be better
if it's not avilable, I need it's english one
I tried many links but it is all expired or "file cant be found"
please help
thanks alot
Hi
Ive got a HTC P problem, everytime I want to install WM6 it gets an Error.
I'm using: zttp://rapidshare.com/files/49302586/HTC_P4350_NLD_4.17.404.2_4.1.13.44_02.94.90_Ship.exe
The error message I got is:
ERROR [294] : INVALID VENDER ID,
The readme says: One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
How can I solve this problem?!!? PLEASE help me!!
Thank u in forward
Yeah It is a strange problem. Aldo I know a lot. I never really Upgraded from Wm5 to Wm6 Sorry....
PapaMopps Please help him
Ayerthon said:
Yeah It is a strange problem. Aldo I know a lot. I never really Upgraded from Wm5 to Wm6 Sorry....
PapaMopps Please help him
Click to expand...
Click to collapse
hahaha...
Which language does your device have?
Which IPl SPL?
Which rom are you running at the moment?
What do you want to flash
etc....????
NL version WM5
IPS 1.08.0001
SPL 1.08.0001
OS 1.8.00
Official WM6 (and then HARD-SPL)
N-Sane said:
NL version WM5
IPS 1.08.0001
SPL 1.08.0001
OS 1.8.00
Official WM6 (and then HARD-SPL)
Click to expand...
Click to collapse
the best would be to find an update WM5 to IPL/SPL 4.xx
then WM6 NL!
but i guess it will be very hard to find a WM5 for you.... good luck.
or try every OFFICIAL Wm6....
Ayerthon said:
Yeah It is a strange problem. Aldo I know a lot. I never really Upgraded from Wm5 to Wm6 Sorry....
PapaMopps Please help him
Click to expand...
Click to collapse
hello, in this post you say you never upgraded to Wm6, but in your signature you already upgraded to 6.1 please tell me how if my SPL & IPL is 1.08
Hi!
I have a problem. I installed WM6.1 on my VPA C2. Everything went fine, but WM6.1 seemed to be slow on my device. So I decided today to downgrade to the original Qtek AKU2 WM5. After I was done downgrading my VPA is not booting and hangs up on the provider screen with the Vodafone Logo.
Here my facts:
IPL 2.21.0001
SPL 2.21.Olip
GSM 02.19.11
OS 2.18.7.7
Please tell me how I can reactivate my device.
Soft- and hardreset didn't work.
Greetings,
Chris
moiney said:
Hi!
I have a problem. I installed WM6.1 on my VPA C2. Everything went fine, but WM6.1 seemed to be slow on my device. So I decided today to downgrade to the original Qtek AKU2 WM5. After I was done downgrading my VPA is not booting and hangs up on the provider screen with the Vodafone Logo.
Here my facts:
IPL 2.21.0001
SPL 2.21.Olip
GSM 02.19.11
OS 2.18.7.7
Please tell me how I can reactivate my device.
Soft- and hardreset didn't work.
Greetings,
Chris
Click to expand...
Click to collapse
Your phone is HardSPL,did you first remove it before flashing wm5 ? if not than you have to first remove the HardSPL flash back to official original vodafone IPL/SPL and than flash official wm5.
Well,you are lucky,if it still boots up or goes into Bootloaders,coz flashing a rom with IPL/SPL even if its an official rom, to a HardSPL device will 'Brick' the phone.
Now,if it still gets into Bootloaders,reflash any custom build wm6 or 6.1 rom to recover the phone,than remove HardSPL,flash back to official IPL/SPL and than revert back to wm5,hope it'll work out.
@zabardast_1: Thank you for the fast answer!
Okay, I now flashed the phone again w/ WM6.1. Everything works again.
What do I have to do now to get WM5 back on the device? I don't want the Vodafone ROM, I want the Qtek ROM. How can I remove the Hard SPL so?
Greez,
Chris
Read and do the method explained in this thread and remove HardSPL :-
http://forum.xda-developers.com/showthread.php?t=342744
The Mighty Search
...knows all!
Hint:
try "remove HardSPL"
Thank you all!
Everything is back on WM5 and working!
Thanz!
Have a nice day