Hi,
in my o2 atom exec the imei number and the radio number are missing is there any way by which i can get back them presently it says not ready in the system info.
Thanks
reddy6980 said:
Hi,
in my o2 atom exec the imei number and the radio number are missing is there any way by which i can get back them presently it says not ready in the system info.
Thanks
Click to expand...
Click to collapse
think you flash it to the wrong ROM or there is a bug on that ROM.
what ROM version/info that you use now?
probably you use ATOM ROM to flash it to ATOM EXEC.
I think its the atom exec ROM only,but in any case i tried ur version of WM6 while installing it says c:/windows/temp failed and it stopped there any suggestions on installing ur ROM on to it
reddy6980 said:
I think its the atom exec ROM only,but in any case i tried ur version of WM6 while installing it says c:/windows/temp failed and it stopped there any suggestions on installing ur ROM on to it
Click to expand...
Click to collapse
make sure you copy all the files into c:\windows\temp and the DSUU will ok in XP, do you Vista? if yes then read XDA-Wiki to install the rom via sd-card. (becareful)
hi chartreux,
copied ur exe to c/windows/temp and installed wm6 but the problem is when the STEP 5 Radio flashing comes it doesn't go further then this step it is always in 0%
is there any way i can install the radio
it will be very helpful if u give me any solutions
thanks
Browsed through the whole forum but did not get any answers for this problem anyone please help is there any way by which i can only update the radio or is it a hardware problem,
o2 guys in india r not helpfull at all
thanks
Related
Hi!
Installed T-Mobile WM2003 from the ROM kitchen.......... Network very weak and the phone has become very slow. Now I want to move back to O2 original ROM (WM2002).
When I try to install the ROM I get an error message :
"ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host. error getting connectiontype"
and the 02 ROM installer cannot communicate with my XDA.
Can someone please help me get back the original 02 ROM, with sim unlocked???
Really need some help here. :?:
I loved my phone as it was and I was stupid to experiment with it !!
regards ,
Diki
If you used the kitchen to cook your ROM then it shouldn't have any impact on the RSU part. Plz give more details on your RSU version, your network MHz and what types of problems you have ?
BTW, did you upgrade to 4.01.00 or 4.01.16 ?
To get back to PPC2002, you can use the SD method
if you upgraded to the 4.01.16 I had this problem too.
you can't use the rom.exe method via the cradle if you've put this tmobile rom on your XDA, you have to use the SD flash method.
I upgraded it to 4.01.16
Radio version installed is 4.21.00
PROBLEMS:
a. The XDA has become very slow (I have a lot of free space on the XDA)
b. Network signals are weak.
Going back to 2002
I received from a friend a pre-release version of t-mobile ppc2003 a few months ago. He put it on my phone via a sd flash. T-mobile has just released (for free) on their website a final release of ppc 2003 and the one I am using is somewhat unstable at times. Does anyone happen to have t-mobile ppc2002 so that I can upgrade. Thanks.
Diki said:
PROBLEMS:
a. The XDA has become very slow (I have a lot of free space on the XDA)
b. Network signals are weak.
Click to expand...
Click to collapse
a. there is a bug in WM2003 and there is a tiny program that should be placed in the \windows\startup directory to solve it. The program is called Clear_Notify.exe ... simple search and you will find it.
If not, then it's a Radio problem that impacts the ROM part. Few hard resets may solve it.
b. if you mean the indicator on the window tray, forget about it ... the point is the ability of making/receiving calls. If you face real problems, I think it's the 4.21 RSU, but be extreamly careful ... upgrading the RSU is very risky especially with this RSU 4.21 on your device!!!!!!.
Good luck
tellan said:
if you upgraded to the 4.01.16 I had this problem too.
you can't use the rom.exe method via the cradle if you've put this tmobile rom on your XDA, you have to use the SD flash method.
Click to expand...
Click to collapse
1. Can you please send me the steps for installing the O2 OS on a SD card?
2. and once it is installed and working, can I just go ahead and delete all the folder (windows program files etc) from the phone memory?
What are the risks involved in writing ROM to SD Card?
I have no idea of this. Can you please help me?
Hi Diki,
Did you get a soution to your problem yet? I elaborate on the same problem.
Thanks for your answer
Norbert
I have the same problem and I still don't know what to do. Please elaborate if you can.
:roll: I have this problem too. If someone find the selution,PLS send me a Email: [email protected].
THX！
:roll: I have this problem too. If someone find the selution,PLS send me a Email: [email protected].
THX！
Guys, please forgive me for asking this, but where can i get the new flash to upgrade my current Qtek 1010 from PPC 2002 to wm 2003?
Please help....
6 posts down there is a person asking the same question
http://forum.xda-developers.com/viewtopic.php?t=9608
Thanks Rudegar for your reply, actually i have been there before, unfortunately, i couldn't successfully complete the process.
is there a palce where i can find downloadable ROMs?
Thanks.
try this
http://xda.weblink.net
or type kitchen in search u will find it
cook rom as u want
and choose ur rom with
1.exe method
2.nb1 for sd flashing
3.nbf for advances user
and use xdatool,xdarit,patch wallaby .....if u want ....mail to me....or much more read in this forum have fun in cook ur own rom
Thanks xdaman for your reply, i have cooked a ROM and i had several problems in my Qtek 1010, so i flashed back my device to the old ROM.
Thanks,
hey w6060 ...unbelievable ..
u mean u didn't want to use wm2003 and still use ppc2002 really ?.... may be try this 4.00.11ENG what's ur proble with ur Qtek1010 ? after flash rom to 2003 ?
can u tell me more ?
xdaman, it's true....
My main problem when upgrading from PPC 2002 to WM2003, my Qtek 1010 went very slow, plus a weak GSM signal, when i flashed back my ROM to the old one, everything returned OK.
?????
may be u try this rom A30.09 original rom AT&T ... that's good in thailand ... and what's ur radio version ? because upgrade only rom didn't have problem with signal for me .... try to cook A30.09 and flash again.... cheer...... and if it still not work for u...... reflash in ur old rom... w6060...i will wait u to reply....
HI
I am not able to get the acess for O2 Connect, as i am not able to register with the IMEI of my PDA XDA Mini. Can any one help is sharing the working imei at the site....
I need to download the ROM upgrade
* ROM: 1.11.00 WWE
* Radio: 1.11.00
* ExtROM: 1.11.922 WWE
* MMS: 2.0.0.22
http://www.seeo2.com/user/XdaIImini/template/XdaIImini_ROMUpgrade_May2005.vm
Thanx in advance
Mac
why do u want to get from o2 while u can get even better upgrades fromm here?
this is what u want...
ftp://xda:[email protected]/Magician/Shipped_ROMS/o2asia_11100_922_11100_ship.exe
and u will need this...
ftp://xda:[email protected]/Magician/Tools/MaUpgradeUt_noID.exe
Directions
use winrar or anything similar to unzip o2asia_11100_922_11100_ship.exe and place MaUpgradeUt_noID.exe to ur unzipped folder and double click it...
Simple as that...
and this is a better upgrade
ftp://xda:[email protected]/Magician/Shipped_ROMS/WWE_11300_550_11200.zip
Thanx
Thanx a lot..
I am downloading this from your link. Whats the best procedure to upgrade My Xda Mini to the latest version.
Thanx againg
Step 1: double click MaUpgradeUt_noID.exe
Step 2: Sit back
Step 3: Relax, alternaltively, u can also take a nap...
Step 4: once its done, reset ur device...
Cheers...
Hello
I downloaded this file from below link
ftp://xda:[email protected]/Magician/Shipped_ROMS/WWE_11300_550_11200.zip
After starting the MaUpgradeUt_noID, i received the error as attached in the snapshot. It shows ERROR 120: COUNTRY ID ERROR 23-23-38-17-38
Pls help
Thanks
Manmohan
i got that too... don't worry...
on ur pc, end the task of MaUpgradeUt_noID.exe and rerun it again... usually the 2nd time will be sucessful...
i thought that only happened to my pc... so i didn't mention it...
UK O2 ROM
Does this ROM work on MDA Compact, and does it work on O2 UK?
Re: UK O2 ROM
dart16 said:
Does this ROM work on MDA Compact, and does it work on O2 UK?
Click to expand...
Click to collapse
yup... you do know that the Magician is sold as i-Mate JAM and MDA Compact, 02 mini and among other names. if not you wouldn't be here right? the difference is just the customization of the ROM... overall, it is the same...
anyway, the better rom is from t mobile...
cheers...
non
i have the following rom as in my profile, however must i upgrade my rom ?
or is there a better rom then mine..................?
http://wiki.xda-developers.com/index.php?pagename=HTC_Alpine_ShippedOrg
how do i download the roms if some cannot be opened
problem
i tried to install one but hanged during the installation .............
now i have no radio or no gsm .............therefore no telephone
how can i get back the radio?
There is an alpine radio ROM that you can download from
ftp://xda:[email protected]/Alpine/Extracted Rom/radio_.nbf
But if you tried burning a Himalaya ROM to your Alpine, you probably messed up your operating system and should flash your good old ROM back as well. There is no WM5 or WM6 for Alpine.
i manged to run alpine_Noid as usual and everything returned to normal ..........
thanks for your advices
help , how i can change softwere ,i have wm2003 sc to wm5
rosollini said:
help , how i can change softwere ,i have wm2003 sc to wm5
Click to expand...
Click to collapse
Nothing to Qtek 2020i???
Need imate jam PM10A (ROM VERSION- 1.12.00 WWE) rom upgrade .
welcome...
It should be on the FTP... Be careful though - i damaged my magician with that rom, though i was flashing off of Vista and that was over a year ago... Also, apparently, 1.12 is only for SOME magicians, cant remember which, but don't quote me on that
why not go for 1.13?
Thank you iceblade911.Where can i get 1.13 ,please post the link.
imate jam prob.
hi friends,
i hve got an imate jam. i was trying to upgrade my ppc rom and download the latest one rom update from the clubimate.com. i have windows vista and when i was updating it so in the middle it gave me that a connection error. although the mobile was correctly connected to the pc via usb. when i saw the screen of my mobile so there was USB written and nothing else. so now when ever i restart my ppc by removing its back so it resets and i cant do any thing to bring it to its original position.
i dont want any upgrade but i want my ppc back. as normal.
can any one pleaseeeeeeeeeeeeee help me
i wud be very very very thankful.
my email address is.
[email protected]
update problem answer
just do it again that iamte jam rom update to 1.12..............got to imate.com and download jam_update1.12
Not to worry mate.
Hi Zabih,
Not to worry. I have not personally tested with Windows Vista so, if you can use Windows XP, it would be great.
There is a special button sequence to bring the I-Mate to a Factory install mode. Then you will be able to flash the ROM again.
I can't find the sequence at the moment, but drop me an e-mail and I will surely come back to you.
[email protected]
hello sir qaseemax
i do have the same problem when i tried to upgrade my imate jam and i am using an xp.... can you help me pls,,,
hope to hear from you soon
thanks a lot.... here is my email... [email protected]
In 2014!
Hey,
Is anyone still using their JAM? It's a lovely device and mine is still working. I was looking for some ROM upgrades. Directions, anyone?
Thanks!