I bought an ATT 8525 a month ago. Suddenly the camera stopped working.
I got the message "Unable to initialize camera. Failed to set up the device".
I looked for this in the web and could not find much help... seems that Cingular may exchange the unit as solution...
Some said it may be a problem with the SD card (2gb from sandisk).
I tried soft reset, hard reset, re-installing ROM (the one from cingular USA) and nothing seemed to work.
I almost gave up when I found this
I followed the steps and not only got the camera to work but I got a very fast , stable and spanish!! version of windows mobile 6. And with a lot of available memory !
Thanks so much to Schap !
hope this would be useful for those having the camera issue!
fabian
ROM Version: Schap's 3.30c
ROM Date: 05/15/07
Radio: 1.41.00.10
Protocol: 32.74.7020.18H
False alarm.
The camera worked for an hour or two... then I started getting the same error.
I did not install anything during that time or change any configuration...
I guess it must be a hardware problem...
any ideas?
Good news!!... (again)
I just downloadedthis cab that says it corrects SC bad management.
After installing the cab... turning off/on the phone... the camera works!!
(I don't know for how long it will work... but at least it is alive! )
Good luck and please share your experience with this cab !!
fabian
doesnt matter since our cameras suck anyways
Im just mad cause I parted with my K800i lol
F****'n camera!
I was trying almost everything.... It's still not working at all. Camera just stoped working..soft reset..nothing...hard reset...nothing...I did what Fabian is writing in his posts...nothing...one thing has changed, phone found camera and I have icon of camera in Programs menu, but it still don't work. It don't give me any error raports or something, when I tap on the camera icon it's just don't do nothing so....mayby I should go to church and pray for a miracle because I don't have any other options.
Someone knows any program to find problem? To diagnose or something...
I am sure that problem is in software. I didn't drop phone or damaged him...
I have Sandisk mSD, mayby that is the source of the problem?
Hi,
I know it sounds weird, but I got the camera to work for 2 or 3 days by removing the battery for 5 minutes.
I really don't know which is the trigger that makes the camera stop working, but it seems that removing the battery "cleans" or releases something somewhere.
It's really annoying but at least I found a systematic way to make the camera return to life everytime it dies...
Try this... maybe works for you too...
fabian
...zzzzzzzzzzzzzzzz...
Yo Fabian
That thing with taking off battery don't work on my 8525.
I was trying few combinations of that solution (without mSD cart, with cart in the phone). Life is hard. Nothing helps.
I just looking for software that can tell me what is wrong, but i can't find nothing. Something to check my hardware or something...
Mayby you have any idea how to get any info what to f*** is going on?
NeOrB
Hi
I really tried everything I could...
I've been looking for that tool you mention ... no luck..
Could not find a windows mobile event viewer neither...
I'm thinking on messing around with the c# sdk to debug the camera application ...
I can tell you now after a few days that removing the battery does not always work
My advise... if you're one of those lucky guys that can claim for the warranty... go for it and replace this f... phone!
fabian
Hi Fabian!
I don't have warranty for my phone, I bought it on eBay in USA, I had 7 days to turn it back if there were something wrong with that....camera stoped working after 9 days. Worst thing is that now I am in Poland and I even can't find any place where someone could repair that phone for me.
Thanks for wasting your time for me!
I'll not surrender and I will try to find solution!
Someone must know what to f**** is going on!
Few guys telling that problem could be with Sandisk mSD. And that could be true, because I remember that after I bought that card camera stoped working.
When I will have some more time I will hard reset PDA or something with taking off mSD from PDA before doing that. Mayby that is the solution. We will see...
Thanks one more time Fabian
C U at the next post!
NeOrB
Related
Hello all thsiis my forst post here and im in need of help
Today my Imate Jamin started playing up
details are
IPL 1.00
SPL 2.13.0000
GSM 02.20.21
OS 2.13.9.23
now you see its started with the phone turning its self off (could have been dead battery) then when i put it back on charge it tokk ages to turn on. once i got it on everything was running very slowly. I carried out a hard reset to see if this would help it has not. when i soft reset it cant take around 5 mins for the phoe to turn on, Also the bluetooth is now not working, it searched for a device but takes about anothe mind then comes up with bluetooth harware error.
even have tried reinstalling the latest rom from the imate ftp site but phone just turns off when it starts the process.
do you have any recomendations on what to do or is it a duck.
cheers Andy
also have tried to do the clear storage and its just teh same story hope som eone can help dont fancy wasting this phone
Just an update
have flashed the rom ans im still not getting the bluetooth to work
says hardware problem.
also there is no sound from the speaker. the phone speaker works
but it is still taking over 5 mins to boot up when you reset it.
anybody any ideas
take it no one can help then oh well looks lik its gonna be an expensive mp3 player. Dont suppose anyone knows how big a card it wil take
sorry mate this does sound like a hardware problem. However, I don't think it would hurt to try one of the older (more stable) roms in this post
http://forum.xda-developers.com/showpost.php?p=1166781&postcount=1
I'm using a 2gig sd, and I'm sure I've seen reports of 4gig working here somewhere (but i'm 2lazy2search), but AFAIK no more than that. Good luck with your expensive mp3 player! i have seen a few posts like yours, I have my fingers crossed for my Jamin as I got it on ebay (no returns)!
wonder if it would be worth trying to source a new mainboard for it anybody know how much they are?
After months of trouble free use my camera dies today. When I try to launch the camera I get the following message "Unable to start Camera" "Unable to initialize camera". I saw an earlier post where the fix was to power down and remove the battery for a few minutes. Unfortunately this did not work for me. I waited approximately 15 minutes before installing the battery and powering up again.
Has anyone elese seen this problem before? And where removing the battery has not helped. I have not tried a Hard Reset. I had a similar problem with my Hermes/838 Pro that was fixed with a hard reset. As you can tell I am trying to avoid the hard reset... I am traveling and do not want to take the time to cutomize my phone, at least not yet.
I am running the original shipped ROM 1.23.707.6
Meanining I have not flashed any ROMs to this phone. It is as shipped from Dopod.
hi i have the same problem since months ... something you have explored? do u have some informations to fix this problem?
Extract this package, and copy all files to the windows directory via Resco Explorer(alle files(.DLL) muts be visible, look at the options of this app) and overwrite the existing files, then softreset, Im not sure if this will work for you, so be sure and make a backup first!
http://www.poigps.com/users/emme/CameraGPS.rar
It really seems a software problem, probably some rom files or registries got corrupted. A reinstall may help, if not, you may still need the ultimate hard reset
I wound uptaking my 810 back to the Dopod service center. The guy said they had to replace my camera. What that means and if that can actually be done I am not sure. I would guess they replaced an entire board. They did re-flash the ROM on my phone as well. Prioir to taking the phone in for service I had not tried to re-flash the rom. I had only done a hard reset with no success.
One side light of my camera going down is... They put the same ROM back on my phone that was previously installed. After the service I have noticed that my GPS gets a "cold" fix much faster than before (twice as fast +/-)
Interesting, I had this exact same error, but on my previous phone, a Samsung D900.
They tried everything, including completely wiping the phone, but nothing helped so in the end they replaced the camera in the phone.
i had this on a tornado
eldaria said:
Interesting, I had this exact same error, but on my previous phone, a Samsung D900.
They tried everything, including completely wiping the phone, but nothing helped so in the end they replaced the camera in the phone.
Click to expand...
Click to collapse
...turned out to be hardware, too.
mainboard error on mine
htc service replaced the camera module twice before they replaced mainboard and cured my phone. I had this problem the first 6 months with my p3600.
Try taking a softreset with the camera on. this worked for me a couple of times
Regards
Possible solution
Possible solution http://forum.xda-developers.com/showthread.php?t=384854
Simply take out battery for at least 15 minutes.
Having the same problem but on front camera ..
Hi,
I having a similar problem but with my secondary (front side) camera. I'm using Dopod D810 with WM6.0.
So, any solutions on this ?
Regards,
Daneal
I have problem Unable to start Camera in htc desire 500
I reset factory but I have this problem. I don't known.what can I do???? please help me
this my number phone 09192561895 in IRAN
Haya everyone.
I am really lost for a solution here.
My wizard's camera has stopped working properly.
It used to work fine, but since recently everytime I want to use it, the pictures come out all screwed up.
I've attached two samples below.
I tried just about every camera patch there's available, but none of them seem to have any substantial effect.
I also tried different JPG settings, different sizes(that worked a short while) and even different Camera applications like coolcamera..
None of them seem to solve the problem.
Anyone have an idea what the problem could be?
Tnx a bunch, just really annoying I can't even use my wizard for sending mms....
Everything just looks wierd...
plz help me out here....
I've had a very similar problem with my old non-smart phone, I took it in to the service center and it was a hardware problem... I hope I won't disappoint you but if it hasn't happened after a ROM flash, camera software change or something - probably your camera is just broken, anyway you can check that in your local service center too?
ehhh.. it is simple settings prob imo. do full backup and hard reset to be sure.
Noob question
Tnx for your reply..
I don't think it's a hardware issue, since the preview of the camera is good.
I'll try a hard reset, but could anybody tell me how I cab perform a full backup?
Sorry for a noob question...
I use SPB Backup. It has been working fine for me untill now, and you have the chance to restore e. g. only pim.
I believe my camera is broken - black screen. I'm not sure but I think it's happened after I upgraded to wm6.
Does anyone had the same problem and was able to fix it or the hardware is ****ed up and there's nothing to do?
Thanks
no....
honestly I don't believe that an upgrade to wm6 can "break" your camera...
... and then there is a simple test that you can try: come back to the original shipped i-mate rom (ftp://ftp.clubimate.com) and you see what happens.
but.... why don't you give us some more infos?
like: is a G3/G4 locked or unloked, IPL/SPL version...
hi
tommy
well, I did that. I restore the original rom and the camera still didn't work.
My phone is G3 locked and I installed on top wm6 from faria (a nice one!).
Of course it could just be that my camera gave up. Since I was not using it regularly and at some point after the upgrade to wm6 I saw the problem it was one of the link.
Can the hardware of the camera be affected by the overclocking?
hey~
i think i may have a similar problem (but the explination doesn't go in to deep detail)
when i try to snap a picture, about half the time it will snap....half the time it just goes black (the screen) and no matter what....it WILL NOT SAVE the photo.
i've tried changing where it saves the photos (main memory or sd card) as well as changed all the settings one by one (megapixels, fine:super fine, snapping type [full press etc] etc. etc. etc. i also tried changing settings via the advance config tool often mention onthe forums)
i haven't updated the rom (stock at&t rom is installed....i'm savy but not savy enuf to change the rom lol) nor have i updated windows (it always gives me an error...says it cant connect to the server or something, oh well i don't much care for micro$ucks anyways lol)
it's running windows 6.1 professional...i have plenty of memory free and hadn't installed anything new or tweaked any settings the day it stoped working....
any ideas?
~j
ps.
oh yeah, oddly...the video record function still works....
Camera might be out of the connecting socket - open your device and make sure it's connected. Failing that - the replacement cameras can be purchased fairly cheaply.
thanks i'll give that a try and let ya know if it works!
i appreciate the very fast reply it's nice to know im not the only insomniac out there lol
~j
Moved since problem is not ROM related.
ubuntujason said:
thanks i'll give that a try and let ya know if it works!
i appreciate the very fast reply it's nice to know im not the only insomniac out there lol
~j
Click to expand...
Click to collapse
Haha, I am 18 hours or so ahead of you.
thank you and sorry i placed my question in the wrong area....where has it been moved to though? :s (while ive been a member her for a while, i am still new to posting...ill admit i usually read...but i hope to change that )
~j
No worries. Let us know when you get it fixed and how.
hey all~
enigma....now i see it's enigmaNZ so new zeeland i assume is where you are....so maybe im a lone insomniac lol
jwzg....thanks again
all....as to the suggestion of opening the phone case....well with my nerve disease i'm going to have to have a friend do that since my hands are often no where near steady...ill let ya all know if that works.
mean time i may also look for maybe some other camera software....like i said, it will snap the photo but it refuses to SAVE the photo....so maybe the software is corrupt who knows....ill try it all
~j
hey all~
so i dove into my system registry tonite....i tweaked some things, changed the localtion of where stuff gets saved, changed some 1's to 0's an vice versa an it now seems to work....hope it remains working!
~j
Must have been a bad camera package.
jwzg~
yeah who knows, i'm just happy it's working again
~j
Okay - so I'm a very sad man today. My 614c was working perfectly Saturday while I was on a road trip. I got home that evening and it showed no signal. It will simply no longer connect to AT&T.
I've tried soft booting it, I've tried shutting down and cold booting. I've removed the battery for a while then restarted. I've restored the device to factory settings. I've flashed it with the new 6.5 image (which is sweet, btw).
Nothing has helped
I had the standard, updated HP image before I started having trouble - so I haven't been playing with the ROMs, etc until now.
Every function seems to be fine except I can't use it to make a phone call - which, unfortunately, is a pretty significant element for a phone.
So - I'm wondering where from here. I'm no phone expert, so I don't know what else I can try.
Anyone know what's wrong and why it would just fail like this (nothing happened to it, it was just sitting in its holder while I drove)?
If there's nothing I can do....is there someplace I can have it fixed?
I called HP and they said "It's out of warranty and we no longer work on them. Sorry." I was pretty mad about that. This was a pretty expensive device and I expected to use it for more than 16 months.
If someone can help, I can't tell you how much I'd appreciate it.
You could try to flash radio firmware v0.89 and tell us after that if something has changed
http://rapidshare.com/files/196503270/RUU_1.8.0_081208_MP_M089_WWE.rar
Thanks for your suggestion. I was already at 89 - but I did do the flash anyhow. It has not made any difference...still no connection.
you can try to use dnw to flash rom (see 6xx,9xx stuck bootloader thread)
have you fix that error?
xuniter said:
have you fix that error?
Click to expand...
Click to collapse
No - still facing the issue. Just can never connect to a tower, so no phone service. I need to find some way to fix the radio software, but using an sd card and flashing it has not worked.
Any help would be appreciated.