Related
Ok, I have spent the past few hours both ruining my phone, and then trying to fix it
So here is my situation. I have a newly purchased SX56 Phone that I decided to try to upgrade using the exe off the Siemens site. I made sure my battery was fully charged, plugged into the cradle, and started the process. At about 10% during the Radio Stack upgrade, the phone failed. My desktop told me to unplug the USB cable, and then reset, at which time the Radio Stack would finish updating. This of course didn't work, and I got the 1% error. It kept rebooting with the 1% error. I proceeded to try to soft resent, and go the now infamous white screen.
I don't currently possess an SD Reader, and its one in the morning, so I don't imagine getting one until tomorrow. In the meantime, after reading MANY posts, I'm not sure what to do.
I suspect that my Radio Stack is gone or fried, and I'm not sure I understand if I can somehow reload it or not?
I'm assuming my current ROM is still intact, only because for one brief second at one moment, I got my PPC up again but it was barely functional, didn't have a start menu, just a white bar at the top of the screen where the start menu bar was before. Since then I've only gotten white screens.
I have tried doing the boot-loader just to see what I got on my phone, I apparently have Wallaby 5.22, but I don't understand if this is a bad thing or not, as I saw many people talking about getting down to 5.17 or 5.15??? Furthermore, I didn't have an SD card in the phone when I pulled up the bootloader, and the phone just got a GSM ERROR. I have yet to find informative info on if this is ok considering I have nothing in there, or if this is a problem for me.
I have also tried the volume + soft reset to get back to the 1% error, but I haven't seen that yet.
My end goal is to have a functioning phone, I would like to have WM2003, but its not necessary. I'm just not sure anymore what methods to try from my current situation.
Keeping in mind I am frozen on the white screen page, Should I:
1. Try to reinstall the Radio Stack first? (and if so how? Does it involve copying files to a SD card? I assume so because I cannot connect to my phone anymore through active sync)
2. Try to get my PC2002 or WM2003 up and running and not worry about the Radio Stack just yet? (also how if this is the case?)
3. Try to return my phone? (This is a last option, because I'm not sure I can even find this phone anymore in my area, and I really like it, and would love to continue to use it)
and finally, am I pretty much screwed on charging my phone until I fix everything else?
Thanks Again
Thanks for all the great information
unless you are in US
then installing the us radiostack which is shipped with the s56 update is a big nono!
imho then installing any radiostack unless you have gsm signal issues or if your phonecompany tell you to is somewhat a risky buiness
Rudegar said:
unless you are in US
then installing the us radiostack which is shipped with the s56 update is a big nono!
imho then installing any radiostack unless you have gsm signal issues or if your phonecompany tell you to is somewhat a risky buiness
Click to expand...
Click to collapse
I am in the U.S., and ATT Wireless sent us all text messages telling us about the upgrade,...
If the radio is knackered the only option is to return it or get somebody on the forum to help that has jtag kit for direct chip flashing. Personally I would send it in for replacement.
cruisin-thru said:
If the radio is knackered the only option is to return it or get somebody on the forum to help that has jtag kit for direct chip flashing. Personally I would send it in for replacement.
Click to expand...
Click to collapse
I seem to see others talking about reinstalling the Radio Stack using RSUpdate, etc...would this not work for me? How would I know if my RS is completely gone, or just malfunctioning because of a bad install?
I bought an ATT 8525 a month ago. Suddenly the camera stopped working.
I got the message "Unable to initialize camera. Failed to set up the device".
I looked for this in the web and could not find much help... seems that Cingular may exchange the unit as solution...
Some said it may be a problem with the SD card (2gb from sandisk).
I tried soft reset, hard reset, re-installing ROM (the one from cingular USA) and nothing seemed to work.
I almost gave up when I found this
I followed the steps and not only got the camera to work but I got a very fast , stable and spanish!! version of windows mobile 6. And with a lot of available memory !
Thanks so much to Schap !
hope this would be useful for those having the camera issue!
fabian
ROM Version: Schap's 3.30c
ROM Date: 05/15/07
Radio: 1.41.00.10
Protocol: 32.74.7020.18H
False alarm.
The camera worked for an hour or two... then I started getting the same error.
I did not install anything during that time or change any configuration...
I guess it must be a hardware problem...
any ideas?
Good news!!... (again)
I just downloadedthis cab that says it corrects SC bad management.
After installing the cab... turning off/on the phone... the camera works!!
(I don't know for how long it will work... but at least it is alive! )
Good luck and please share your experience with this cab !!
fabian
doesnt matter since our cameras suck anyways
Im just mad cause I parted with my K800i lol
F****'n camera!
I was trying almost everything.... It's still not working at all. Camera just stoped working..soft reset..nothing...hard reset...nothing...I did what Fabian is writing in his posts...nothing...one thing has changed, phone found camera and I have icon of camera in Programs menu, but it still don't work. It don't give me any error raports or something, when I tap on the camera icon it's just don't do nothing so....mayby I should go to church and pray for a miracle because I don't have any other options.
Someone knows any program to find problem? To diagnose or something...
I am sure that problem is in software. I didn't drop phone or damaged him...
I have Sandisk mSD, mayby that is the source of the problem?
Hi,
I know it sounds weird, but I got the camera to work for 2 or 3 days by removing the battery for 5 minutes.
I really don't know which is the trigger that makes the camera stop working, but it seems that removing the battery "cleans" or releases something somewhere.
It's really annoying but at least I found a systematic way to make the camera return to life everytime it dies...
Try this... maybe works for you too...
fabian
...zzzzzzzzzzzzzzzz...
Yo Fabian
That thing with taking off battery don't work on my 8525.
I was trying few combinations of that solution (without mSD cart, with cart in the phone). Life is hard. Nothing helps.
I just looking for software that can tell me what is wrong, but i can't find nothing. Something to check my hardware or something...
Mayby you have any idea how to get any info what to f*** is going on?
NeOrB
Hi
I really tried everything I could...
I've been looking for that tool you mention ... no luck..
Could not find a windows mobile event viewer neither...
I'm thinking on messing around with the c# sdk to debug the camera application ...
I can tell you now after a few days that removing the battery does not always work
My advise... if you're one of those lucky guys that can claim for the warranty... go for it and replace this f... phone!
fabian
Hi Fabian!
I don't have warranty for my phone, I bought it on eBay in USA, I had 7 days to turn it back if there were something wrong with that....camera stoped working after 9 days. Worst thing is that now I am in Poland and I even can't find any place where someone could repair that phone for me.
Thanks for wasting your time for me!
I'll not surrender and I will try to find solution!
Someone must know what to f**** is going on!
Few guys telling that problem could be with Sandisk mSD. And that could be true, because I remember that after I bought that card camera stoped working.
When I will have some more time I will hard reset PDA or something with taking off mSD from PDA before doing that. Mayby that is the solution. We will see...
Thanks one more time Fabian
C U at the next post!
NeOrB
Hi Guys, i have a strange Problem since a couple of days.
The touch HD turns itself off after some minutes. I have to take out the battery and put it back in, otherwise it will not turn on...
i have:
- deactivated automatic shut down in power settings
- deactivated today timeout
- tried hardreset
- tried another rom (currently dutties final)
no success :-(
i have absolutlely no clue what could cause this and how i can fix it...
help is highly appreciated.
hello there , actually maby its a virus or there is problem in SPL
Try to install again the SPL modified and tell me
best regards
ms4cah
unlikely it has anything to do with SPL. it was fine for months, i had not flashed or installed anything.
it seams dead now by the way. i cannot turn it on again.
i also tried a new battery. it doesnt even charge, no light at the power button. nothing.
Surrido said:
unlikely it has anything to do with SPL. it was fine for months, i had not flashed or installed anything.
it seams dead now by the way. i cannot turn it on again.
i also tried a new battery. it doesnt even charge, no light at the power button. nothing.
Click to expand...
Click to collapse
Sounds like a warranty claim
I am getting the same problem!! is there anything i can do to fix this? anyone figured out the reason?
I had this sort of problem.
The HD would hang, then switch off, then to get back on I had to remove the battery for a while. Sometimes it worked after a minute, other times I had to leave the battery disconnected for longer.
So I performed a hard reset and it switched itself off during boot (after successfully resetting).
Battery out for a while.
H/R once more. Again crashed during boot but not at the same point as previous.
Tried a different battery with a full charge - same result.
Tried to re-flash a "very popular" custom ROM with USPL. Got to 1% and error. This was because the HD had crashed..
Tried to flash the official HTC ROM and it got to 15% and error. HD crash.
So I have contacted HTC and they are sending a courier to collect it so they can take a look with a view to repairing it.
The last ROM I successfully loaded about 2 weeks prior to the start of my problems was a custom win mo 6.5 rom. As I couldn’t get it to a stable state - I couldn’t flash the official HTC ROM.
I’ve convinced myself it’s a hardware fault rather than any software damage..
Although I fear I’ll be in for some bad news.
mine too
Hi,
I have the same problem.
Mine was doing hard reset and after a day or two the same problem.
Now I cannot turn it on.
I will send it to htc...
Crossing my fingers.
I had the same problem with mine...
While turned on, it automaticly tryed to turn of, as if something was pressing the on/off buttom. Everytime that message for turning it off poped up and I just couldn't control the on/off button anymore.
I tryed everything and nothing worked. It really seemed a hardware and warranty claim issue. However, since I bought it abroad and it does not have warranty here in Brazil, I just decided to sell it (obviously warning the buyer about the issue) and to buy another one (which is working as a charm).
It is a hardware issue, for sure...
So my HD has been away at HTC for nearly a week, and im currently tracking its return journey, due to land back here at some point this morning.
I have had no contact from HTC so its going to be a suprise as to whether anything has been repaired.
My hope was they couldn't turn it on at all - thus replacing the bits n bobs inside, replacing the main board containing my 6.5 ROM.
So for now im hoping "no news will be good news", but I will update this when I have it back.
... I've the same problem...
Hi, I've the same problem. Do you have any solutions?
Nasher79 said:
So my HD has been away at HTC for nearly a week, and im currently tracking its return journey, due to land back here at some point this morning.
I have had no contact from HTC so its going to be a suprise as to whether anything has been repaired.
My hope was they couldn't turn it on at all - thus replacing the bits n bobs inside, replacing the main board containing my 6.5 ROM.
So for now im hoping "no news will be good news", but I will update this when I have it back.
Click to expand...
Click to collapse
Just recieved delivery. The service report states:
1. Diagnosis
2. Replace Main Board
3. Function Test
Result
Confirms it was a H/W fault and my "flashing" did not effect the warranty status. That may have been because they couldnt get far enough to confirm so.
Mega75 said:
Hi, I've the same problem. Do you have any solutions?
Click to expand...
Click to collapse
Other than a Warranty repair, im afraid not. Try your best to get it back to HTC official software, then report it as no power / cant boot.
Nasher79 said:
Just recieved delivery. The service report states:
1. Diagnosis
2. Replace Main Board
3. Function Test
Result
Confirms it was a H/W fault and my "flashing" did not effect the warranty status. That may have been because they couldnt get far enough to confirm so.
Click to expand...
Click to collapse
Good to know, confirmed h/w issue
i simply deactivated automatic shut down in power settings as mentioned in the first post and unistalled a couple of new programs i had recently installed!!
Not quite sure which of the above worked.. but atleast for now it seems to be working fine!! the screen has not turned off by itself and i have not had to remove battery etc to get it to work again!
I'm not quite sure if the problem is properly fixed but it has been a few days since anything occurred!! so fingers crossed!!
mine was doing this last tuesday, each time i went into my pocket for it, it was turned off, then i hard to do the reset pin or remove the battery, it has been ok since, i just thought, maybe it was me, pushing it in my jeans i might be turning it off.
also using duttys popular 6.5 latest rom, i dont think its fair to blame his rom, as mines ok now, maybe i should reflash it again?? im still waiting for a new version to be released.... JESUS!!! just looked it up to r12, im on r9 .
oh no... no it not..... says to go here, and it will be released here and not on dutty throy???
http://htcpedia.com/forum/forumdisplay.php?f=79
iamdarren said:
mine was doing this last tuesday, each time i went into my pocket for it, it was turned off, then i hard to do the reset pin or remove the battery, it has been ok since, i just thought, maybe it was me, pushing it in my jeans i might be turning it off.
also using duttys popular 6.5 latest rom, i dont think its fair to blame his rom, as mines ok now, maybe i should reflash it again?? im still waiting for a new version to be released.... JESUS!!! just looked it up to r12, im on r9 .
oh no... no it not..... says to go here, and it will be released here and not on dutty throy???
http://htcpedia.com/forum/forumdisplay.php?f=79
Click to expand...
Click to collapse
FYI, Throy is releasing roms exclusively to HTCPedia now, so no future roms will be released on either XDA or www.duttythroy.com
wow!!! i never knew!!!! thats crazy as his own site duttythroy wont be used.
im getting it now, but only 11 when it says 12 is out, either way, i will still flash i love the roms, i will be sure to be on all the site, incase theres another change of heart??
anyway guys i will report if i noticed the shutdown thing happening again with the version. 4mins till downloaded.....
I think theres a couple of different issues here. My own problem was due to faulty parts in the hardware itself. Absolutley nothing to do with any ROM, only reason I mentioned them was because of the invalid warranty possibility.
If your problem was ROM related, Im sure in the relevant ROM thread, there would be many people (everyone) with the same issue. Thats not to say that its not some sort of conflicting software you may have installed after the ROM flash.
Some simple troubleshooting steps:
1. Hard reset - If it still has a problem...
2. Flash Official HTC ROM - If still a problem...
Phone HTC.
All the best, hope you manage to get something to work for you. I know how lost I felt without mine!
Nasher79 said:
I think theres a couple of different issues here. My own problem was due to faulty parts in the hardware itself. Absolutley nothing to do with any ROM, only reason I mentioned them was because of the invalid warranty possibility.
If your problem was ROM related, Im sure in the relevant ROM thread, there would be many people (everyone) with the same issue. Thats not to say that its not some sort of conflicting software you may have installed after the ROM flash.
Some simple troubleshooting steps:
1. Hard reset - If it still has a problem...
2. Flash Official HTC ROM - If still a problem...
Phone HTC.
All the best, hope you manage to get something to work for you. I know how lost I felt without mine!
Click to expand...
Click to collapse
Your exactly right. Some people experience similar symptoms which are rom related others have same problem which is hardware related. One can only be fixed by HTC as motherboard problem, other can be rectified by different means without having to send device back for repairs
Hi again,
Today I have received an sms from HTC service informing me that my HD has a circuit problem and they will fix it without any charge.
I have to wait.
Hi everyone,
I have a Imate Jasjam, which has served me well over the last few years. It was running Windows Mobile 5 with the Telstra upgrade that was sent out a while ago. A few days ago, however, I dropped it a short distance, and suddenly the phone function stopped working. Initially I wasn't even able to open up the phone application, but a few soft resets later, that now works. Unfortunately when I start it up, it says "No GSM". There is nothing written in the Device information about Radio version, Protocol Version of IMEI.
I did a hard reset - no joy.
I thought it might be to do with my rom version, so I installed HardSPL, flashed to Black Satin (as I'd always wanted to try that one), but still no luck. The same problems persist.
Does anyone have any ideas what I can do, or am I stuck with a PDA instead of a phone?
Thanks so much for your help!
Paul
My apologies for bumping my own message, but I wondered if anyone had any further suggestions. To clarify, I have tried the various wiki answers, but I'm assuming that because this was caused by trauma rather than flashing that it may well be a hardware issue. Is that a fair assessment?
Thanks again,
Paul
I think thats a fair assessment, its possible the radio may have popped out of its connection. Might be an idea to open up the hermes and check.
If flashing a stock ROM and radio doesn't fix it, then sorry to say but it's busted (unless you can fix the hardware part of it). Have an 8525 with the same problem.
Thank you for the responses. I'm game to have a play with the hardware, but wondered if there was a good guide to getting to know the inside of my phone anywhere. I'd appreciate it if someone could point me in the right direction!
Check mikechennon's guide he provided to deassemble the phones.
I have a Hermes (Orange SPV 3100 but unlocked). The phone has stopped working but everything else is fine.
I've tried putting other sim cards into it, cleaned all the sim contacts etc with no success at all. As far as it's concerned, there is no valid connection. Phone and data connections don't work. All the Windows settings and programs run fine, it's just the phone that doesn't so I have a pda without a phone! I wasn't trying to flash a rom - the op system is all as original except for the unlock.
I don't think it's worth enough to pay for a professional repair so any suggestions for tracing and curing the problem and hints as to whether its likely to be a faulty connection, faulty parts or software problem?
Thanks.
I have the exact same phone, and similar problem. The difference is my phone is not completely unusable, it sometimes works for a while and sometimes doesnt.
I have just - 10 mins ago - flashed a new radio rom to see if it helps and so far (10 minutes!), so good. But I will need to leave it for a couple of days to see if it works properly.
Is there an "X" beside the signal icon? Also have you checked the Comm Manager and disable the phone and enable it again?
Ah well I didnt need to leave it for a couple of days, its not working again even with new radio rom.
Ive tried new o/s, new bootloader and new radio but still the same problem, nothing else to try really ?
(btw: Mine usually has an exclaimation mark next to signal strength.)
Carthief When did the problem first start occurring? Did you flash a radio/OS ROM and it started to happen, or did it just happen out of the blue?
Sorry I did not see this post...http://forum.xda-developers.com/showthread.php?t=562486
I don't know dude. Maybe one of the senior members can help out.
Shawn80 said:
Is there an "X" beside the signal icon? Also have you checked the Comm Manager and disable the phone and enable it again?
Click to expand...
Click to collapse
I will check tomorrow. I am using a different phone at the moment and have left the Hermes at the office.
Hi Shawn, yeah that post covers when my phones problem started - I hadnt flashed anything recently when it started messing up.
I've tried tonight;
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Problem 5:
METHOD 1
But I didn't flash the patched radio.
Phone is working at the moment... I'll update if it is still working or not tomorrow, if its still working maybe Batxda could try it out as well
--------------
Update:
--------------
Phone worked all night, and this morning, but froze up this afternoon and needed rebooting. It's currently working ... but probably not for long! My battery is running out very fast as well.
Shawn80 said:
Is there an "X" beside the signal icon? Also have you checked the Comm Manager and disable the phone and enable it again?
Click to expand...
Click to collapse
Hi again. Yes, there is an "x" beside the signal icon (normally meaning that phone is turned off) and also beside the connectivity icon (two horiz arrows and a "x" meaning no active connection). Also, I've just noticed that both of those icons no longer respond to stylus taps. All the other icons do.
I've tried turning the phone on via Setup > Connections > Comms and Setup > Personal > phone. Neither work, in fact, they do not respond at all.
I haven't tried the cure that Carthief tried but then, I've never flashed any roms on this phone either. I am apprehensive about that because I haven't done it before so, if that's the solution, I would need to find a free evening and do lots of reading.
BTW, the unlocking was done ages ago professionally, not by me.
Any ideas?
Thanks.
Batxda said:
Hi again. Yes, there is an "x" beside the signal icon (normally meaning that phone is turned off) and also beside the connectivity icon (two horiz arrows and a "x" meaning no active connection). Also, I've just noticed that both of those icons no longer respond to stylus taps. All the other icons do.
I've tried turning the phone on via Setup > Connections > Comms and Setup > Personal > phone. Neither work, in fact, they do not respond at all.
I haven't tried the cure that Carthief tried but then, I've never flashed any roms on this phone either. I am apprehensive about that because I haven't done it before so, if that's the solution, I would need to find a free evening and do lots of reading.
BTW, the unlocking was done ages ago professionally, not by me.
Any ideas?
Thanks.
Click to expand...
Click to collapse
Maybe I missed it but I did not see any mention of your doing a Hard Reset. (I assume you have tried soft resets) In general if the problem persists after this it rules out most software issues. I also think it's worth a try because of your comment about the icon being unresponsive.
Mike
Mike
I had done a hard reset but, just to be sure, I've just done it again. After the first it locked up at the password screen so I did a few more. Next, I let the Orange config run through. With the third, I removed the battery before Orange it did its thing. Both the same - no active phone but no lock-up either.
Icons on top bar still not active and x's against them.
When I go to settings > Personal > Comms, the phone icon is highlighted and appears to be "on" (no "x") but the top bar icons still show that it isn't. When the comms phone icon is clicked, the cross appears and the phone is, presumably, turned off and can't be turned on again.
When I go to settings > Personal > Phone, it says that the phone is off, would I like to turn it on. Click yes but it doesn't work.
BTW, I'm using an O2 sim card which works perfectly in a NIKI (touch dual).
I hope this is a software not hardware problem. Is there any point in flashing a new radio or complete windows rom? If so, which one would you recommend (it's a minefield for one of little brain)
Many thanks.
B
I did think you might already have tried a hard reset. In general that tends to point towards hardware, BUT corruption of the ROMs can occur. Unfortunately that is not my area of expertise. Hopefully someone will recommend something here. You could always look on http://www.mrvanx.org/thg/ making sure you have Hardspl installed.
Mike
Hi all, my phone is still not working completely but it does seem to be staying alive for longer periods now.
I have just downloaded the latest (from Oct. 2007) software upgrade from Orange for the Hermes - I think it is windows mobile 5, not sure yet. I cant install it tonight but Im going to try that tommorow.
I downloaded the Orange update but it wouldn't load on my phone. all I got was an error message which said it was the wrong rom for the phone. I don't know whether that's because I've had it unlocked or maybe my rom is newer than the update. anyway, I'm no further forward.
I've just noticed that, in Settings > Device Information, it is blank against the radio version and the Protocol version and that there is no IMEI listed either. I guess that means the radio is corrupted so I will try installing a new one. It is op version 14.123.1.614 and ROM version 1.23.61.4. Which radio is recommended.
What does the missing IMEI number mean or is that also connected with the missing radio?
B
Hi Batxda, I dont know which radio to recommend, mine is Radio version: 1.47.30.10 and ROM version: 3.54.255.3
My phone has now been working for over 24hrs, battery has stayed charged as well... so I haven't installed the Orange rom yet.
I bought a new phone having pretty much given up on this one... and now it seems to be working again!
Nope. Not working. Ran for over 48hrs but locked/froze up today with calls going straight to answerphone, battery drained from 70% to 20% in about two hours as well!
My last attempt is going to be running the phone with no memory card in, and no sim card with phone disabled. Will report back.
Have you had any luck Batxda ?
Radio flashes all lock up - help please
carthief said:
Nope. Not working. ...............
Have you had any luck Batxda ?
Click to expand...
Click to collapse
Sorry to hear that. I've had different but similarly unsuccessful times. I hope your experiment goes well.
I flashed with HardSPL (SPL-2.10.Olipro) then tried to flash a Radio.
1st I tried v 1.11.00.00 running from the PC. It froze so I had to unplug it. That messed everything up and I ended up with it stuck on the bootloader screen (Type 2a) so I used mtty and found that command "set 16 0" worked so I could return to WM5.
2nd I tried to flash radio v 1.47.00.10 from the SD card. It started OK, got to about 20% and stopped. That was at 11:15. Its now 13:30, 2.25 hours later and it hasn't moved in that time. I am going to have to stop it but I'm sure it will end up corrupted again.
H E L P anybody, how can I flash a radio to this damned thing?
BTW, it is a Hermes 100.
B
Batxda when I reflashed a new radio I just followed the guide here:
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=18&Itemid=26
It sounds like you've gone through the same procedure as me so you've probably already followed that guide...
I don't know what to suggest, but if it was me, and the radio wouldn't flash, I would (being a bit dim ) try it a few more times until I was exhausted...
I've just rebooted mine to see if I could provoke it to do anything with no sim/memory cards in. It gets to the password entry screen and tells me I've entered the wrong password but I know its the right password !! Does anyone know where/how these phones store the password ?
carthief said:
Batxda when I reflashed a new radio I just followed the guide here:
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=18&Itemid=26
It sounds like you've gone through the same procedure as me so you've probably already followed that guide...
I don't know what to suggest, but if it was me, and the radio wouldn't flash, I would (being a bit dim ) try it a few more times until I was exhausted...
I've just rebooted mine to see if I could provoke it to do anything with no sim/memory cards in. It gets to the password entry screen and tells me I've entered the wrong password but I know its the right password !! Does anyone know where/how these phones store the password ?
Click to expand...
Click to collapse
I have a AT&T 8525 Hermes that was having No GSM issues.
I'm not sure if both of you seen the No GSM message when booting the phone (when it was bootable) & if you did, here's what I did to get the phone working again.
I removed the battery & pressed hard against the back stainless steel plate especially around the area near the battery contacts. It worked for mine & the No GSM issue would go away. If it happened again, then I repeat the same procedure & it works again.
My conclusion is that the GSM chip has broken or loose contacts with the motherboard so as long as the contacts is good, that keeps the radio working. BTW, this phone was dropped before & after that, this issue started happening.
Lastly, I'm not sure if your issue is really with the password...that's just a symptom of something else that is wrong with the system...not sure if it's entirely software or perhaps hardware or combination of both.
konker said:
I have a AT&T 8525 Hermes that was having No GSM issues.
I'm not sure if both of you seen the No GSM message when booting the phone (when it was bootable) ...
Click to expand...
Click to collapse
No, I haven't seen that message.
Since the last post, I've tried to flash various radio roms, two WM6 roms and what XDA says is the original WM5 Orange SVP M3100 rom for my phone (v slightly different version number though). All of them hang at around 11% or give an error message. I've ended up with a Dopod start screen (from one of the WM6 attempts) and a funny mixture of colours but I can still start Windows so I've got a pda with no phone access.
Taking your message on board, I'm starting to think that there is a hardware fault preventing the radio from being recognised. That is unless there is something fundamental that, being a n00b at this, I'm not doing. I've put Hard SPL on the phone, flashed roms and failed, reset it with MTTY (set 16 0) and used a variety of radio and main roms. Is there anything else I should have done?
I'm about to give up and see what it's value is and then see if I can get a hardware repair (if it's worth it). Otherwise, I've heard that some fetes have a throw the mobile competition ......... !!!!!!
B