Related
Not quite sure what the issue is with this one. Back in the beginning of the year my XDA II fell from waist height when the carry case snap popped open (notebook bag brush across the front catching on the flap). The only noticeable problem after that was that the power button no longer works, so I have to power it on by pressing the phone or address book buttons etc.
About a month and a half after that incident the phone suddenly just stopped getting signal. I was using the standard shipping firmware with a few apps. Soft reset, hard reset both failed to fix the issue, the phone simply will not pick up the network. Interestingly enough if I play with the phone settings and go through the process of manually selecting a network the phone WILL pick up available networks in the area (this kills my idea that the GSM radio failed altogether). For now I've had to switch back to a junk phone as I've been unable to figure this one out. Anyone have any ideas on this one? I'm using T-Mobile for a service provider and I'm based out of California.
Also, does anyone know of a place that can do diagnostic/repairs here in the U.S.? So far my searches have come up empty.
Thanks in advance.
Give this a try:
Reflash the phone with any version of ROM and it should start working fine again. I think the problem is that you're radio firmware somehow got corrupt.
Ok, guess I'll have to give it a try. I've been avoiding trying the slightly riskier stuff as I got this thing via an independant third party, so warranty/support are iffy.
Is there a general release ROM that I should be looking for (using T-Mo in U.S.)? Or should I look to cooking my own (which I'd rather not)?
You can try upgrading the ROM with the same branded one. That shouldn't void the warranty.
I.e. If you've got an O2 device, get the new O2 ROM
Reflashing
I have had a simular problem with hard locking. Finally my phone quit working all together. I went into boot loader mode and flashed it. It's like having a new phone again. So yeah.. I think the ROM's can get corrupt.
Brandon
NeoCole: Looks like you are using T-Mo in the U.S. Mind if I asked what you flashed yours with? Did you use a specific ROM, Radio Stack version etc.?
I'm running an unlocked i-mate (contradictory to my subj title, I know).
Flash it with the T-mobile 1.72 ROM
ROM Version
Well.. I flashed it with the IMATE 1.72 ROM and used most of it's extended ROM. I used the battery Meeter from the Qtek extended rom. I built most of my extended ROM Myself.
I look at T-Mobile's Beta 1.72 ROM like I look at Windows ME. Both should have never happend. I can't count how many times I had a hard reset with the T-Mobile ROM. I'm not sure if it was a combination of the programs I was useing or not. I saw a post that said SBP was possibly causing the problem. So I quit using SBP products. Later I still had to HARD RESET from time to time. Now that I'm running differently, My device has never been so smooth.
Let me know if this helps,
Brandon
Looks like I'm pretty much screwed. Without a working power button I can't do a hard reset into bootloader mode. When I try using a utility app that allows me to do a hard reset I can't hold down the jog dial at the same time. Good times.
*edit: yeah, that would be 'can't' hold down the jog dial.
You don't need to boot into the bootload to perform an upgrade... the upgrade software takes care of everything for you (except the hard reset at the end)
All you need to do is sync through Activesync and then run the upgrade program.
I would (and have!) flash the imate 1.72 ROM. It is very stable for me and HAS improved the battery life of my imate.
As stated above, just start the flash process and it will put the device into bootloader mode and perform the flash. It will need a HR at the end, but since your power button is not working, maybe you could remove the battery, slide the red slide/switch back into place for a few seconds as if the battery were there, then slide it back, put in the battery, slide it back into place and press one of the puttons to turn it on.
Hey . . . it might just work!
imate 1.72 ROM did the trick. After I actually READ all the posts regarding the ROM I realized it came with an installer and got that done. So far so good. Now if I could only find my missing tomtom 3 cd key that went MIA during my last move
Hey, that's fabulous! Welcome back to the world of convergence.
Okay... hopefully I can get one of you much more computer savvy people to help me here.
I have NOT done anything to the rom in my phone, BUT I did add a LOT of programs to it yesterday. Also, I added omapclock and omapclockplus, and they were working fine, but over the course of the day everytime the phone woke back up from "sleep" mode, or after a soft reset, I received a message saying the phone could not execute "omapclock.lnk." From there I was able to manually use omapclock and run at 252mhz without any problems.
However, last night I left my spare battery at home, and when the battery was getting low the phone turned off. Since then when I boot it up it only goes into the IPL/SPL mode... of which my settings are:
IPL 2.25 SPL 2.25 GSM 02.25.11 OS 2.25.11
I have performed a hard reset, and I still see the exact same startup screen after it.
I am able to get the phone into bootloader mode, HOWEVER, I don't know what good that does because my mini-USB broke (like so many others I read about) and I have just been using an external battery charger and bluetooth connection to sync with my computer.
If anyone could help me, that would be excellent. I'm fairly proficient with computers, but I don't have anywhere near the knowledge many of you here do. Thanks.
starvinactor said:
Okay... hopefully I can get one of you much more computer savvy people to help me here.
I have NOT done anything to the rom in my phone, BUT I did add a LOT of programs to it yesterday. Also, I added omapclock and omapclockplus, and they were working fine, but over the course of the day everytime the phone woke back up from "sleep" mode, or after a soft reset, I received a message saying the phone could not execute "omapclock.lnk." From there I was able to manually use omapclock and run at 252mhz without any problems.
However, last night I left my spare battery at home, and when the battery was getting low the phone turned off. Since then when I boot it up it only goes into the IPL/SPL mode... of which my settings are:
IPL 2.25 SPL 2.25 GSM 02.25.11 OS 2.25.11
I have performed a hard reset, and I still see the exact same startup screen after it.
I am able to get the phone into bootloader mode, HOWEVER, I don't know what good that does because my mini-USB broke (like so many others I read about) and I have just been using an external battery charger and bluetooth connection to sync with my computer.
If anyone could help me, that would be excellent. I'm fairly proficient with computers, but I don't have anywhere near the knowledge many of you here do. Thanks.
Click to expand...
Click to collapse
Your mini usb broke.. on the bottom of your phone? Or the cable itself? If its just the cable grab one off a digital camera or something and push a new rom to it.
fuzion said:
Your mini usb broke.. on the bottom of your phone? Or the cable itself? If its just the cable grab one off a digital camera or something and push a new rom to it.
Click to expand...
Click to collapse
Unfortunately not... the mini usb broke off INSIDE the phone. I had previously sent it to a repair center, and they told me that because it had lifted the pads it was "unrepairable." So since the phone still worked fine, I simply bought a bluetooth USB adapter and external charger, and all the phone's functions have worked perfectly since.
Please... anyone?
Not to be a bother, but if anyone has any suggestions... I've learned a ton from reading this site.
I guess, this will be my last update. It just seems like... hell, I don't even know what's going on.
Thanks again.
There is a way to reflash from a memory card... But you need to have a previous backup of your ROM...
What's your phone model? Maybe I can create a backup from mine...
yellowdragon said:
There is a way to reflash from a memory card... But you need to have a previous backup of your ROM...
What's your phone model? Maybe I can create a backup from mine...
Click to expand...
Click to collapse
If you could help that would be amazing.
I sent you a PM about it.
I have just aquired an xda ii from a friend and am very eager to get started but I have no clu eon what exactly I need to do.
First off I have read the FAQ's and what not and understand what everything seems to do.
However I beleive my xda is locked as when I try to put in my 3 sim card, it just says invalid sim or not recognized. Searching around the forums I have located the various unlocking tools but am not sure which one to go for. Also is there even any chance of it working with my 3 sim card?
Secondly, do I need to upgrade anything with it? Ideally what I want is to run tom tom navigation on it aswell as all the others features of the xda. (Im still searching around on how I check my version exactly >.<)
Thirdly, there appears to be a problem with the sound. Sometimes it beeps and such as normal, other times it dosent. Is there anywhere that can repair these sort of faults?
Thank you in advance for the time!
EDIT:
After playing around I found the information
ROM Version - 1.72.00WWE
ROM date - 03.15.04
Radio version 1.17.00
Protocol version 1337.28
ExtROM version 1.72.181
Is there anything I can upgrade it too? Or worth doing?
"However I beleive my xda is locked as when I try to put in my 3 sim card"
recall 3 blocking their very simcards to be able to work in no 3g phones
so it's likely that it's not your phone which is locked
you can upgrade it to wm5 if you like
http://wiki.xda-developers.com/index.php?pagename=Windows_Mobile_5
Ah I see now, thank you.
I will just get another sim no problem.
I am interested in going up to wm5 but have a few more questions.
I see there are many different ROM versions, any particular one to go for? Will I still be able to use the camera & phone part? And also is there anyway to keep the ROM I have now and restore if anything nasty happens?
Hi there!
Izzy180 said:
Ah I see now, thank you.
I will just get another sim no problem.
I am interested in going up to wm5 but have a few more questions.
I see there are many different ROM versions, any particular one to go for? Will I still be able to use the camera & phone part? And also is there anyway to keep the ROM I have now and restore if anything nasty happens?
Click to expand...
Click to collapse
I have a himalaya just like yours, I've upgrade to a lot of ROMs here in the forum, and currently, I decided to go to helmi AKU3.5 SP2. But this ROM lacks of software you will be needing most. But as helmi said, you can install softwares as you like, and i bet this is really fast. You can also try C_Shekhar's Rom, it has softwares built on it. But helmi's ROM is faster. you can also adjust your 15mb storage to 30mb storage so you can install more software you like. Unlike WM2003, it uses RAMdisk for the installation of your softwares and it uses 128mb. At first you will be having hard time to understand the flow, but you of course you can learn from it.
Nweiz, what country are you from?
Okay so all I got to do is install this rom, and go searching for the software to pwoer the phone, camera, etc?
Is there anyway to backup / restore my current ROM and all the other parts I should need incase the worst happens?
I only just got this and I really dont want to break it because I have wanted one for ages
"phone, camera"
is a part of the rom
Brilliant! Looks like things should be alot easier than I thought.
Still playing around, I found my bootloader version is 1.03, does this matter much?
And I have found some backup tools by searching through the wiki pages, but they dont seem to work for my smart phone?
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=62
Big help! Thanks!
Okay looks like im all set, back this up. Download the rom, install.
Hopefully all should go as planned.
Just one small little off topic thing, I noticed the problem with my sound is that when its in the cradle, all sounds work. However when it is out the cradle, sounds are intermittant. Software or hardware fault would anyone say?
Okay upgrade went without a problem and its now running fine.
However the only problem I noticed is that it does not detect the backup battery, im guessing this means the battery needs replacing?
I literally just noticed a problem with the charge socket too, looks like the pins on the right are slightly bent yet it still fits and charges.
Could this explain the sound issues? As when its in the cradle and on charge it works fine.
Izzy180 said:
However the only problem I noticed is that it does not detect the backup battery, im guessing this means the battery needs replacing?
Click to expand...
Click to collapse
man, i think its bcoz wm5 is designed for not using the back up battery. Bcoz wm5 uses storage for installation of your application (default), and even if the battery drains, it will not hard reset. i guess.
I'm having a wierd problem with my Hermes. I have the Scnaps 4.01 WM6 rom on my phone right now, but the same thing happened with Blacks rom when i was running that.
Sometimes when i turn it on, it says it has signal so i try to make a call i get operation failed, and then you see the signal drop back to searching, it finds the network and then logs back on. Same thing happens even if i dont make a call, turn on the hermes, and look at it, has signal, then 10 seconds or so later it drops to searching (it never really had signal) then logs back on, and then sms's get delivered. I've also had people try to call me during this time and it's like the phone is off.
I've tried a few different radio versions recently but same behavior with all of them. 1.54.30, 1.54.07 and currently on 1.43.
Something else weird is the fact that it seems like (I could be wrong) this only happens after having the rom on for a week or so, ie after flashing a rom, the first week or so i don't get the issue, then it slowly starts to happen - this could just be my imagination.
Has anyone else had this issue? Any ideas/suggestions welcome, thanks
Hi Ferni...
This is something that is becoming quite an issue recently
Firstly, have you made sure the SIM contacts are nice and clean and everything is fitted OK - and have you tried a different rom image? If not - try these first.
Secondly, where abouts in the world are you and what network are you on?
Thirdly - when did you install 1.54.30 and 1.54.07 - did your problems start before or after you flashed a 1.54x radio - and what radio were you running before trying these.
Finally - What other information do you have about your device - is it a herm100,200 or 300, what IPL/SPL is it.
Sorry for the 100 questions, but I'm investigating these issues at the moment as a lot of users have had similar problems especially after using radio 1.54.x as this thread discusses.
Thanks for the reply. Just read the other thread you linked to (and the threads it linked to). Interesting to know i'm not the only one.
I just pulled the sim out and gave it a rub and the contacts and put it back in. I also had a bigger battery in it, so i removed that and put the standard one back in. See if that makes a difference.
I used to run the black rom, now I run the schaps one, trying to avoid flashing it again just a pain to resetup everything you know....
I'm in Australia, on the Optus network. The JasJam is actually only sold by Telstra here, but i got one 2nd hand and use it on the optus network fine (Optus sell the Dopod). The latest radio rom 1.54.30.10 i belive is actually from Telstra - in the offical WM6 rom from them for the JasJam.
As for when i flashed which rom and when the problems started happening - i can't really say sorry, i didn't keep track. I've had the phone around 6 months, flashed it with a cooked WM6 rom (black i think) when i first got it, i probably updated the radio as well.
How do i tell if it's a 100, 200 or 300? Also not sure what SPL it is, HardSPL or something?
Tempted to flash it to the official telstra rom released recently with the latest radio, so if it does die completely i can send it back for warrenty. What do you think?
Thanks for the info - every little helps at the moment!
Firstly, yes - the radio you're running is native to the area and network and so if you're running 1.54.30.10 and it goes duff you should be covered by your warranty so don't worry. Also, it's not certain yet that there is definitely a problem with this radio so don't loose too much sleep. (Most of the problems linked with this radio that I've researched so far seem to be coming from Europe and after rolling back).
As for flashing with the official ROM, that's a decision for you - however in the cases of sudden GSM death, the phone will still boot to Windows and it is still possible to flash the OS and bootloader roms (just not the radio) so if it did go bad with an unofficial ROM on it you should still be able to roll it back - again sleep easy ;-).
As for the problem - the steps you've taken are a good start, see how it goes and keep us informed here.
It may be worth also trying to manually set your band (if applicable on your network). Sometimes problems like this can be caused by issues on the network itself and trying an alternative (maybe a friends) SIM card for a different network or even manually switching the phone to GSM (if available) can "cure" a problem (although it's a pain if you specifically need to use 3G and it's data speeds!).
Finally - to see your full device information you need to enter the "bootloader" (tricolour) screen. Hang on to this information on the bootloader screen as it can be useful if you ever encounter a bad flash.
To do this, hold the OK button on the left of your phone and the power button on the right then press the little reset button with your stylus. You will then see the model at the top with the IPL version below it and then the SPL version below that. To get out of the tricolour screen, press the reset button again. Needless to say this won't erase anything or damage your device but make sure you close your apps and save your data first
I'm not running 1.54.30.10 right now, think i'll flash back to that monday just in case.
Since changing my battery back to the original and cleaning the sim card, still having the same problem. Seems to be happening more and more often as time goes on.
I've actually already manually set my band and tried to run without 3g turned on before i posted this thread when i was doing my own trouble shooting, and it didn't help.
When flashing i normally just push autodetect which is why i don't know my bootloader info off the top of my head.
It's a HERM100 running IPL-1.04 and SPL2.10.Olipro.
I'm starting to think it only has a limited time left in it before it doesn't pick up radio at all. When that happens i'll flash the official firmware back on it, and the orig bootloader (not sure how to do that yet, will have to look it up). And see if i can get warrenty.
ferni said:
I'm not running 1.54.30.10 right now, think i'll flash back to that monday just in case.
Click to expand...
Click to collapse
What radio are you currently running? Thought it was 1.54.30.10 or did you change that the other day when trying a new ROM?
ferni said:
Since changing my battery back to the original and cleaning the sim card, still having the same problem. Seems to be happening more and more often as time goes on.
I've actually already manually set my band and tried to run without 3g turned on before i posted this thread when i was doing my own trouble shooting, and it didn't help.
When flashing i normally just push autodetect which is why i don't know my bootloader info off the top of my head.
It's a HERM100 running IPL-1.04 and SPL2.10.Olipro.
I'm starting to think it only has a limited time left in it before it doesn't pick up radio at all. When that happens i'll flash the official firmware back on it, and the orig bootloader (not sure how to do that yet, will have to look it up). And see if i can get warrenty.
Click to expand...
Click to collapse
*IF* this is the sudden GSM death syndrome then it will progressively get worse unfortunately - but it might not be that (think positive!)
[edit : removed - brainfart you answered my question] Incidentally, just updated this thread here - Look at post #60, it's a long post but there is a couple of possible things for you to try there (multiple flashing on a "chilled" phone) for users who STILL have some GSM connectivity... Might be worth a go and certainly could do no more harm... The post itself is very technical but just follow the instructions about 3/4 way through the post and ask any questions back here in this thread so things don't get too confused!
In terms of flashing your ROM - when you _really_ feel the phone may die _very very soon_ then it's worth considering flashing it with the latest OFFICIAL rom from your provider while you are able to do a full flash but don't leave it until DHL are at your door to collect it just in case you need some help!
Oh yeah... and finally for tonights post - Rolling back from Olipros Hard SPL... back to the normal, official SPL - Mr Vanx has written a fantastic guide to this here complete with illustrations - That should save you some searching
The SPL rollback, of course, should be the very last thing to do before shipping it back under warranty of course tho - just incase you need it in the mean time!
Good luck - and keep us updated - particularly if all works again (or not)forum.xda-developers.com/showthread.php?t=299070&page=32
I'm on 1.43 right now.
So what you think i should do is put my phone in the fridge (minus battery) for 10-15mins, then flash 1.43 a couple of times while it's still cold, and see how that goes?
ferni said:
I'm on 1.43 right now.
So what you think i should do is put my phone in the fridge (minus battery) for 10-15mins, then flash 1.43 a couple of times while it's still cold, and see how that goes?
Click to expand...
Click to collapse
Yes. Crazy as it sounds, if the previous radio caused "logical" bad blocks - a combination of a couple of flashes in quick succession with the PLA at a cooler temperature might recover them! (temperature issue came from the data sheet for the chip itself - Apparently more efficient writing at temperatures a minimum of 10C below ambient).
Good luck - let us know how it goes... I've got my fingers crossed you'll have a Hermes with it's wings back shortly
Last night the phone got worse, i had a missed call, tried to turn the unit on to see who it was and it wouldn't turn on, so i soft reset it, it booted up ok, but wouldn't pick up a signal.. eventually after about 5mins it did, but then it locked up. So i pulled my sim card out put it into an old phone which i'm using for now.
This morning came into work and put it in the fridge for 15mins, and flashed the latest radio firmware on it. Then flashed the latest official telstra rom onto it (getting ready for warrenty). That's just finished, only step left is to put the original boot loader back on. May test it again for a couple of days to see if i can get it to do the same thing on the offical rom/radio before i send it back. Will let you know.
Thanks for your help so far.
Ok Just another update, only a couple of hours since i flashed it and it's already doing the same thing, losing network, so going to call imate and send it for warrenty. We tried
ferni said:
Ok Just another update, only a couple of hours since i flashed it and it's already doing the same thing, losing network, so going to call imate and send it for warrenty. We tried
Click to expand...
Click to collapse
We did indeed - Ah well, at least you're covered by warranty
Mr Vanx has written a fantastic guide to rolling your bootloader back - complete with illustrations. (repeated for others who've just started reading this thread)
Yeah hopefully it gets covered under warrenty. That bootloader guide worked perfect
For anyone who cares, they replaced my radio board under warranty - I now have a new IMEI number. Haven't got the phone back yet to test to see if it's fixed.
Did you ever upgraded the Radio ROM ?
Or was it always 1.43.
My first ROM only upgrade.
http://forum.xda-developers.com/showpost.php?p=1462158&postcount=292
Yeah i had tried a few different radio roms before this. I suspect it didn't like being flashed so many times.
I am having same problem with 8525 here in south texas. currently running latest att official rom. I have flashed k 1.30, tnt special, schaps rom in last week and so as 1.41.xx , 1.48.00.00, 1.51.xxxx, 1.54.xx xx rom and all have same problme.
Don;t know what to do?
I live in WI and travel to rural areas where there is no 3g. I have experienced this same problem when I loose the signal from a 3g area to a non 3g area as it reacquires the signal. I did all the recommended fixes with bandswitch and activesync but to no avail. However, I did this about a week ago, and my problem seem to have disappeared
Go to advance config>data connections>gprs auto attach
disable it
I think the phone goes beserk when it doesn't find the 3g signal?
Try it and please report back if it works
gondalguru said:
I am having same problem with 8525 here in south texas. currently running latest att official rom. I have flashed k 1.30, tnt special, schaps rom in last week and so as 1.41.xx , 1.48.00.00, 1.51.xxxx, 1.54.xx xx rom and all have same problme.
Don;t know what to do?
Click to expand...
Click to collapse
I flashed one of the wm6.1 roms and ended up with 1.54.07 radio and was getting the "modem disconnected" error message everytime I tried to log on to the internet.
I reflashed the original WM6.0 ROM from AT&T and then reflashed my radio to 1.48 (can't go back to 1.16 because of the radio bootloader I think) and then tried to log on to the internet.
That didn't work
But then I made a phone call to my home phone
tried logging on and it worked.
Been working fine since
crossing my fingers and hoping I dodged the bullet, not gonna flash again til ATT comes out with 6.1 then if it acts up even a little I am gonna send it in for warranty repair.
I hope this procedure works for you mate.
pedro2k said:
I live in WI and travel to rural areas where there is no 3g. I have experienced this same problem when I loose the signal from a 3g area to a non 3g area as it reacquires the signal. I did all the recommended fixes with bandswitch and activesync but to no avail. However, I did this about a week ago, and my problem seem to have disappeared
Go to advance config>data connections>gprs auto attach
disable it
I think the phone goes beserk when it doesn't find the 3g signal?
Try it and please report back if it works
Click to expand...
Click to collapse
Not exactly sure where this setting is, the closest thing I could find was to install HTweakC. And now I have auto attach off. I also live in WI rural area, and 3G has been growing. Coming closer my home, and when I go to work it switches to 3G from Edge and I believe this is the biggest cause of this problem. I will let everyone know if this has helped me or not.
Thanks pedro for your suggestion. I will try that and will report back.
I have a Hermes (Orange SPV 3100 but unlocked). The phone has stopped working but everything else is fine.
I've tried putting other sim cards into it, cleaned all the sim contacts etc with no success at all. As far as it's concerned, there is no valid connection. Phone and data connections don't work. All the Windows settings and programs run fine, it's just the phone that doesn't so I have a pda without a phone! I wasn't trying to flash a rom - the op system is all as original except for the unlock.
I don't think it's worth enough to pay for a professional repair so any suggestions for tracing and curing the problem and hints as to whether its likely to be a faulty connection, faulty parts or software problem?
Thanks.
I have the exact same phone, and similar problem. The difference is my phone is not completely unusable, it sometimes works for a while and sometimes doesnt.
I have just - 10 mins ago - flashed a new radio rom to see if it helps and so far (10 minutes!), so good. But I will need to leave it for a couple of days to see if it works properly.
Is there an "X" beside the signal icon? Also have you checked the Comm Manager and disable the phone and enable it again?
Ah well I didnt need to leave it for a couple of days, its not working again even with new radio rom.
Ive tried new o/s, new bootloader and new radio but still the same problem, nothing else to try really ?
(btw: Mine usually has an exclaimation mark next to signal strength.)
Carthief When did the problem first start occurring? Did you flash a radio/OS ROM and it started to happen, or did it just happen out of the blue?
Sorry I did not see this post...http://forum.xda-developers.com/showthread.php?t=562486
I don't know dude. Maybe one of the senior members can help out.
Shawn80 said:
Is there an "X" beside the signal icon? Also have you checked the Comm Manager and disable the phone and enable it again?
Click to expand...
Click to collapse
I will check tomorrow. I am using a different phone at the moment and have left the Hermes at the office.
Hi Shawn, yeah that post covers when my phones problem started - I hadnt flashed anything recently when it started messing up.
I've tried tonight;
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Problem 5:
METHOD 1
But I didn't flash the patched radio.
Phone is working at the moment... I'll update if it is still working or not tomorrow, if its still working maybe Batxda could try it out as well
--------------
Update:
--------------
Phone worked all night, and this morning, but froze up this afternoon and needed rebooting. It's currently working ... but probably not for long! My battery is running out very fast as well.
Shawn80 said:
Is there an "X" beside the signal icon? Also have you checked the Comm Manager and disable the phone and enable it again?
Click to expand...
Click to collapse
Hi again. Yes, there is an "x" beside the signal icon (normally meaning that phone is turned off) and also beside the connectivity icon (two horiz arrows and a "x" meaning no active connection). Also, I've just noticed that both of those icons no longer respond to stylus taps. All the other icons do.
I've tried turning the phone on via Setup > Connections > Comms and Setup > Personal > phone. Neither work, in fact, they do not respond at all.
I haven't tried the cure that Carthief tried but then, I've never flashed any roms on this phone either. I am apprehensive about that because I haven't done it before so, if that's the solution, I would need to find a free evening and do lots of reading.
BTW, the unlocking was done ages ago professionally, not by me.
Any ideas?
Thanks.
Batxda said:
Hi again. Yes, there is an "x" beside the signal icon (normally meaning that phone is turned off) and also beside the connectivity icon (two horiz arrows and a "x" meaning no active connection). Also, I've just noticed that both of those icons no longer respond to stylus taps. All the other icons do.
I've tried turning the phone on via Setup > Connections > Comms and Setup > Personal > phone. Neither work, in fact, they do not respond at all.
I haven't tried the cure that Carthief tried but then, I've never flashed any roms on this phone either. I am apprehensive about that because I haven't done it before so, if that's the solution, I would need to find a free evening and do lots of reading.
BTW, the unlocking was done ages ago professionally, not by me.
Any ideas?
Thanks.
Click to expand...
Click to collapse
Maybe I missed it but I did not see any mention of your doing a Hard Reset. (I assume you have tried soft resets) In general if the problem persists after this it rules out most software issues. I also think it's worth a try because of your comment about the icon being unresponsive.
Mike
Mike
I had done a hard reset but, just to be sure, I've just done it again. After the first it locked up at the password screen so I did a few more. Next, I let the Orange config run through. With the third, I removed the battery before Orange it did its thing. Both the same - no active phone but no lock-up either.
Icons on top bar still not active and x's against them.
When I go to settings > Personal > Comms, the phone icon is highlighted and appears to be "on" (no "x") but the top bar icons still show that it isn't. When the comms phone icon is clicked, the cross appears and the phone is, presumably, turned off and can't be turned on again.
When I go to settings > Personal > Phone, it says that the phone is off, would I like to turn it on. Click yes but it doesn't work.
BTW, I'm using an O2 sim card which works perfectly in a NIKI (touch dual).
I hope this is a software not hardware problem. Is there any point in flashing a new radio or complete windows rom? If so, which one would you recommend (it's a minefield for one of little brain)
Many thanks.
B
I did think you might already have tried a hard reset. In general that tends to point towards hardware, BUT corruption of the ROMs can occur. Unfortunately that is not my area of expertise. Hopefully someone will recommend something here. You could always look on http://www.mrvanx.org/thg/ making sure you have Hardspl installed.
Mike
Hi all, my phone is still not working completely but it does seem to be staying alive for longer periods now.
I have just downloaded the latest (from Oct. 2007) software upgrade from Orange for the Hermes - I think it is windows mobile 5, not sure yet. I cant install it tonight but Im going to try that tommorow.
I downloaded the Orange update but it wouldn't load on my phone. all I got was an error message which said it was the wrong rom for the phone. I don't know whether that's because I've had it unlocked or maybe my rom is newer than the update. anyway, I'm no further forward.
I've just noticed that, in Settings > Device Information, it is blank against the radio version and the Protocol version and that there is no IMEI listed either. I guess that means the radio is corrupted so I will try installing a new one. It is op version 14.123.1.614 and ROM version 1.23.61.4. Which radio is recommended.
What does the missing IMEI number mean or is that also connected with the missing radio?
B
Hi Batxda, I dont know which radio to recommend, mine is Radio version: 1.47.30.10 and ROM version: 3.54.255.3
My phone has now been working for over 24hrs, battery has stayed charged as well... so I haven't installed the Orange rom yet.
I bought a new phone having pretty much given up on this one... and now it seems to be working again!
Nope. Not working. Ran for over 48hrs but locked/froze up today with calls going straight to answerphone, battery drained from 70% to 20% in about two hours as well!
My last attempt is going to be running the phone with no memory card in, and no sim card with phone disabled. Will report back.
Have you had any luck Batxda ?
Radio flashes all lock up - help please
carthief said:
Nope. Not working. ...............
Have you had any luck Batxda ?
Click to expand...
Click to collapse
Sorry to hear that. I've had different but similarly unsuccessful times. I hope your experiment goes well.
I flashed with HardSPL (SPL-2.10.Olipro) then tried to flash a Radio.
1st I tried v 1.11.00.00 running from the PC. It froze so I had to unplug it. That messed everything up and I ended up with it stuck on the bootloader screen (Type 2a) so I used mtty and found that command "set 16 0" worked so I could return to WM5.
2nd I tried to flash radio v 1.47.00.10 from the SD card. It started OK, got to about 20% and stopped. That was at 11:15. Its now 13:30, 2.25 hours later and it hasn't moved in that time. I am going to have to stop it but I'm sure it will end up corrupted again.
H E L P anybody, how can I flash a radio to this damned thing?
BTW, it is a Hermes 100.
B
Batxda when I reflashed a new radio I just followed the guide here:
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=18&Itemid=26
It sounds like you've gone through the same procedure as me so you've probably already followed that guide...
I don't know what to suggest, but if it was me, and the radio wouldn't flash, I would (being a bit dim ) try it a few more times until I was exhausted...
I've just rebooted mine to see if I could provoke it to do anything with no sim/memory cards in. It gets to the password entry screen and tells me I've entered the wrong password but I know its the right password !! Does anyone know where/how these phones store the password ?
carthief said:
Batxda when I reflashed a new radio I just followed the guide here:
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=18&Itemid=26
It sounds like you've gone through the same procedure as me so you've probably already followed that guide...
I don't know what to suggest, but if it was me, and the radio wouldn't flash, I would (being a bit dim ) try it a few more times until I was exhausted...
I've just rebooted mine to see if I could provoke it to do anything with no sim/memory cards in. It gets to the password entry screen and tells me I've entered the wrong password but I know its the right password !! Does anyone know where/how these phones store the password ?
Click to expand...
Click to collapse
I have a AT&T 8525 Hermes that was having No GSM issues.
I'm not sure if both of you seen the No GSM message when booting the phone (when it was bootable) & if you did, here's what I did to get the phone working again.
I removed the battery & pressed hard against the back stainless steel plate especially around the area near the battery contacts. It worked for mine & the No GSM issue would go away. If it happened again, then I repeat the same procedure & it works again.
My conclusion is that the GSM chip has broken or loose contacts with the motherboard so as long as the contacts is good, that keeps the radio working. BTW, this phone was dropped before & after that, this issue started happening.
Lastly, I'm not sure if your issue is really with the password...that's just a symptom of something else that is wrong with the system...not sure if it's entirely software or perhaps hardware or combination of both.
konker said:
I have a AT&T 8525 Hermes that was having No GSM issues.
I'm not sure if both of you seen the No GSM message when booting the phone (when it was bootable) ...
Click to expand...
Click to collapse
No, I haven't seen that message.
Since the last post, I've tried to flash various radio roms, two WM6 roms and what XDA says is the original WM5 Orange SVP M3100 rom for my phone (v slightly different version number though). All of them hang at around 11% or give an error message. I've ended up with a Dopod start screen (from one of the WM6 attempts) and a funny mixture of colours but I can still start Windows so I've got a pda with no phone access.
Taking your message on board, I'm starting to think that there is a hardware fault preventing the radio from being recognised. That is unless there is something fundamental that, being a n00b at this, I'm not doing. I've put Hard SPL on the phone, flashed roms and failed, reset it with MTTY (set 16 0) and used a variety of radio and main roms. Is there anything else I should have done?
I'm about to give up and see what it's value is and then see if I can get a hardware repair (if it's worth it). Otherwise, I've heard that some fetes have a throw the mobile competition ......... !!!!!!
B