hello my phone has no sound at all i tryed all the settings also when i put my sim cad in it will no work but my 2nd sim will
steosavage said:
hello my phone has no sound at all i tryed all the settings also when i put my sim cad in it will no work but my 2nd sim will
Click to expand...
Click to collapse
Just to be clear. Are you saying you get sound with one SIM but not the other!? or you get no sound with either card?
Mike
sorry there is 2 problems whit my phone the first one is the sound i dont get any
the 2nd problen is my sim card i have it in my n80 now and its working fine but when i put it in my tytn its not working thanks for the quick reply
steosavage said:
sorry there is 2 problems whit my phone the first one is the sound i dont get any
the 2nd problen is my sim card i have it in my n80 now and its working fine but when i put it in my tytn its not working thanks for the quick reply
Click to expand...
Click to collapse
Ok well we need to pin down moe detail:
Regarding the sound -
1. Has it suddenly stopped?
2. Is it both front and rear speakers (ie no sound in calls as well as rear speaker using say wm player or alarms etc?
3. Did the phone get a knock / fall?
4. and lets not avoid obvious things like the volume setting on the task bar?
Regarding the SIMs
1. are they both for the same provider service?
2. do any error messages or the like appear when turning on the device?
Mike
1. Has it suddenly stopped? yes
2. Is it both front and rear speakers . sound is good in calls no sound with wm player also no beeps when i press a butten
3. Did the phone get a knock / fall?no not that i no off but it is possible
4. and lets not avoid obvious things like the volume setting on the task bar? i did try all the settings
Regarding the SIMs
1. are they both for the same provider service? yes
2. do any error messages or the like appear when turning on the device?the sim card is missing you can still make emergency calls if your service provider supports it
steosavage said:
1. Has it suddenly stopped? yes
2. Is it both front and rear speakers . sound is good in calls no sound with wm player also no beeps when i press a butten
3. Did the phone get a knock / fall?no not that i no off but it is possible
4. and lets not avoid obvious things like the volume setting on the task bar? i did try all the settings
Regarding the SIMs
1. are they both for the same provider service? yes
2. do any error messages or the like appear when turning on the device?the sim card is missing you can still make emergency calls if your service provider supports it
Click to expand...
Click to collapse
Ok I think it's possible the rear speaker connection as come adrift. This is not uncommon and it just needs pushed back on (normally). To completely rule out a software issue would mean doing a hard reset to be sure.
The choices are:
if you have a warranty then use it - they may require you to hard reset first anyway to confirm there is a problem
if you have no warranty then it's a fairly straight forward fix - remove rear casing 4 screws and push back on the white connector with the red and black wires. (this I can give more info on later if you wish) (I am assuming the speaker is not faulty - this would be rare)
Regarding the SIM: I have no good answer. There are different generations of SIM cards. All I could suggest is getting another one and having the old number swapped to it.
Other people may have alternative suggestions to the SIM issue???
Mike
about the sound issue, I had a similar problem, it wouldn't play sounds at all, except maybe on incoming calls.
I just did a re-flash with a rom and it worked fine.
fauzman said:
about the sound issue, I had a similar problem, it wouldn't play sounds at all, except maybe on incoming calls.
I just did a re-flash with a rom and it worked fine.
Click to expand...
Click to collapse
Yes, though doing a hard reset should also be sufficient to rule out a software issue. Flashing another ROM would be a rather extreme way of doing the same thing - in effect re-setting and re-installing all the software.
Mike
hello i did a hard reset to confirm that it was not a software issue
i do not have a warranty so i took the 4 screws out and found the white connector and it looked ok but i gave it a push anyway put the phone back and got the same thing so then i tryed takeing the connector out and put it back in and still i get no sound i am tinking it might be speaker is faulty i hope not if it is how would i go about getting a new one
ps thanks for the help that i have got from the forum so far
btw i got the sim card working
steosavage said:
btw i got the sim card working
Click to expand...
Click to collapse
If you can access a multimeter you can test the resistance across the speaker connections (or disconnect the speaker fom that black housing and take it to someone who has). If this possible then you need not be concerned about the reading you get just whether it reads an open circuit when set on a resistance scale.
A very very crude way to test it would be to get a battery 1.5 v max and a couple of wires. Connect the wires to the white block connector and one wire to the battery. Flick the remaining wire across the remaining battery terminal. If you hear a brief click from the speaker then chances are it is ok. Do not hold the wires on for more than a fraction of a second or you burn out the coil.
I do not know a source for the rear speaker but you could contact these people:
http://cnn.cn/shop/advanced_search_result.php?keywords=speaker&image.x=32&image.y=8
or search ebay for spmeone parting out a junked tytn.
Mike
VAriation on "no sound" problem??
My coworker has a new 8525 that stopped playing any sound through the speaker (headset still worked). Through trial and error found that removing battery while 'on' fixes the problem, but not permanently - it returns aftershort period of time. It does not seem likely that a loose connection would act like that (??)
No sound too
about the sound issue, I had a similar problem, it wouldn't play sounds at all, except maybe on incoming calls.
I re-flash with a rom but it didn't help. If i remove battery for some while and plug it the problem dissapear for some while but for some while it came's back and i has no sound. Maby i should change radio rom??
adikos said:
about the sound issue, I had a similar problem, it wouldn't play sounds at all, except maybe on incoming calls.
I re-flash with a rom but it didn't help. If i remove battery for some while and plug it the problem dissapear for some while but for some while it came's back and i has no sound. Maby i should change radio rom??
Click to expand...
Click to collapse
This kind of issue is rarely anything to do with the ROM or Radio. Sound coming and going is normally related to poor connections either at front or rear speakers. Both can become loose, the front speakers spring contacts can get loose if the phone is knocked and the rear speaker push on connector can work loose through a knock or just pushing the stylus in and out.
http://forum.xda-developers.com/showpost.php?p=1376254&postcount=2
Mike
thanks bro
mikechannon said:
Ok I think it's possible the rear speaker connection as come adrift. This is not uncommon and it just needs pushed back on (normally). To completely rule out a software issue would mean doing a hard reset to be sure.
The choices are:
if you have a warranty then use it - they may require you to hard reset first anyway to confirm there is a problem
if you have no warranty then it's a fairly straight forward fix - remove rear casing 4 screws and push back on the white connector with the red and black wires. (this I can give more info on later if you wish) (I am assuming the speaker is not faulty - this would be rare)
Regarding the SIM: I have no good answer. There are different generations of SIM cards. All I could suggest is getting another one and having the old number swapped to it.
Other people may have alternative suggestions to the SIM issue???
Mike
Click to expand...
Click to collapse
it worked by undoing the 4screws and attachinck the white cable back.
thanks
zackss said:
it worked by undoing the 4screws and attachinck the white cable back.
thanks
Click to expand...
Click to collapse
Well done, and for those that want to see the white connector with the red/black wires:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
... and no you don't need to take out the entire circuit board as shown above, all you need do is remove the back casing. (This applies to rear loudspeaker problems only. Problems with sound from the front earpiece requires a much bigger dismantle and this is covered elsewhere).
Mike
i have the same problem with the speaker, after to have changed varied rom my phone not work the ring, mp3 player, ecc but i don't know if the problem is sotfware or hardware
skizz3tto said:
i have the same problem with the speaker, after to have changed varied rom my phone not work the ring, mp3 player, ecc but i don't know if the problem is sotfware or hardware
Click to expand...
Click to collapse
Well, you could ask in the threads for that ROM to see if other folks have that problem OR revert to another ROM or take the back casing off and check the connector.
Mike
mikechannon the roms are:
rom_hermes_becham_-diamond_like-_full_edition_wm6.1
Build 21728 Lite V21 Tiger
and mAdkoE HERMES wm6.1
now i check the connecto.
Thank You!!!
Related
ok this is a bit funny
handsfree earphone works,,,but the ear phone in the mda compact doesnt work
the normal sound speaker works,,just not the phone speaker
ok it works stuttery when i press up on the slide switch and i can hear the caller kinda stuttering
wierd software rpoblem i think
its not hardware problem as the slider makes it work,,if i constantly press up o the slider but then i hear the caller and the beep beep it makes to tell you its at full volume
My qtek s110 is doing the same thing after i dropped it, could i have knocked the contacts?
Can anyone explain why the volume slider would make it work.
Cheers
I think its a hardware prob only! Cz if the volume slider is getting the sound volume increased, you guys still couldnt get the full volume right? If so, its probably the speaker or its contacts getting the problem!
www.CartyStudios.com
solution for no noise problems
Hey guys and girls, I also had problems with “no noise from the earpiece only.. and were puzzled with the problem for few days….until found the reason behind it.
As I am a lover with high-tech devices, I really wanted to fix this problem by myself (not prepared to pay few hundred dollars for repair from technicians).
I also want to contribute something on this site, as I have read great information’s from this site.
Here it goes.
I had this "no noise issue" problem with one of my device (have 2 sets of o2 mini) had no sound on the earpiece only (meaning speakerphone, hands free mic all works perfectly).
Now, to make everything short, I have done a great research with few personal technicians and even official technician from O2 Company and found the answers for this problem.
The fault actually lies with what is called the "Audio Daughter Board". It is a removable internal PCB that the speaker contacts to receive its audio signal from the phone. The board has a connector that is soldered to it which sits on another connector that is soldered to the main board. Both of these connectors can become removed from their respective solder connections usually as a result of a fall or physical impact. Usually all that is needed is a touch up of the solder points.
This Audio “daughter board” is connected with black connector at right hand side only, and the rest of the board with double sticky tape.
Most likely, the black connector has been disconnected to the “daughter board during drop of the device, as you need to solder the parts back (black connector has 14 legs, 7 on the left and 7 on the right) to get your earpiece sound back to normal.
I have done it, so can you (very small legs, so has to have delicate hands).
Now, mine works like a charm…. So happy…
After all, it was neither the programs, nor the legs of the earpiece, but the actual connection between the boards itself.
Hope my information helped.
Cheers
PS: I have updated my device to 2003 second edition with radio 1.13.00 but have no idea where to get pda programs. Can anyone let me know where to find such good programs?
It works!!!! Thanks
Your a genius
Hi im so happy it worked. I bought even a new speaker but this was noit the problem.
The internal speaker is now working but i found another problem with the ring tone liudness which i have to clarify now. So the serach will start again for me.
Again thanks.
Hi need help from all of u.
Hi my o2 mini have this problem, i can't hear anthing from the caller but they can hear me.may i know how to get the problem done, hope all of u can help me thank You.
bluehanul76
You really rock m8.
I was very doubfull that this would work. I have tried everything else people has suggested to no avail.
BUT I thought I have nothing to lose in trying you suggestion.
And it worked. It really worked.
Thank you very much.
Sorry for what am i going to say, maybe i did not get things clear...
How on earth can you solder the black connector both on the main motherboard and on the audio daughter board? Am just asking cause my magician had a broken earpiece and when i open it to replace it the phone died. Strange thing is that when i remove the storage card it comes alive again but no sound from the earpiece. So this solution is great although i had to make the question just to know how to handle things.
Thanks guys
Got it guys, the one connector on the main board was detached completeley and got stuck into the other. That is why i thought that it was one piece.
Man , i said to myself how come these people got it soldered , they must all have personal nano robots lol
Update:
Burned the small black connector tha sits on the main rboard
Any chance for someone to know what sort of PCB is this so i can purchase one?
Firts of anything sorry for my inglish but i´m portuguese and my inglish is a litle rusty.
I known there are a lot of people whith this problem and i had to. I tried a lot of things and i find a solution. The major problem of the this is that the black conector don´t conect very well whith audio bord, and i do a trick, so i thake a litle peace of cotton roll in powertape (like one that is on back of keybord) and a put it as way that when e close it make pressure in de audio border conector(in left of earpiece) agaist de front cover.
I hope I can help
enduromen
i have the same problem, and i will try to do as instructed. if it succeed everyone have a drink on me
Hello.
I have the same problem ina Qtek s100 but , like I dont know very well how to do look for the hardware piece that you send me the picture file because i cannot download it from XDA, it dont appear. If you send me to [email protected] I will be gratefull.
Thank you
hi
i have a cingular 8525. i have no sound out of the loudspeaker and when i connect a USB headset i dont have sound either. i replaced the speaker thinking that it was that if anyone could please help me.
thanks
brandon
djstimpy said:
hi
i have a cingular 8525. i have no sound out of the loudspeaker and when i connect a USB headset i dont have sound either. i replaced the speaker thinking that it was that if anyone could please help me.
thanks
brandon
Click to expand...
Click to collapse
Welcome to XDA-Dev
Not enough info given.
Is there any sound at all out of wither speaker for any function whetjher it be phone / notifications etc etc.
Did you ever have any sound and if so when and how did it stop.
Have you done a HARD reset or not
Did you flash a new ROM / install a new programme and so on
Mike
i get sound out of the head speaker when calling but when i change over to loudspeaker it doesnt work. well i bought it used n it had this problem. i have done a load of hard resets and ive changed the rom so many times but nothing has yet worked.
djstimpy said:
i get sound out of the head speaker when calling but when i change over to loudspeaker it doesnt work. well i bought it used n it had this problem. i have done a load of hard resets and ive changed the rom so many times but nothing has yet worked.
Click to expand...
Click to collapse
Hi
Well I just looked at the board again (it's been a while). Unfortunately, in my view, it is not possible to work on the speaker circuit other than in very crude fashion. The board is multi layer and hence you cannot trace the connections easily, if at all without a diagram. Checking circuit integrity is virtuallty impossible without proper test equipment. Even repair shops won't bother - they will just get a new board. Another frustration is that it is very difficult to work on the circuit whilst it is switched on.
So after that ramble, I'm afraid if you have checked the new speaker and it's connector block then there's not much else you can do. It is possible that part of the circuit is blown, possible through a dodgy mini usb connection!
I would certainly believe it to be hardware if you've done hard resets and tried different ROMS. In fact any ROM should work.
Mike
i was afraid of that =( well i guess i got screwed on that part thanks for the info.
Hello,
I got problem with microphone in my HTC HERMES. Without any reasons microphone stop working. Everythink is fine, i can call and do voince records, and then i got call or i just want to do voice note and nothing beside noise is recording. I dont know why it happining. After some time all back to normal, i can call and they hear me, also my voice note are loud and clear. My radio is 1.16. I reinstal my software to PDACornerPro.V25.NonRBSN.Opera. I did do HardReset and this mike problem always come back.. WHY? How make it work correct?
PLEASE HELP ME
neonq said:
Hello,
I got problem with microphone in my HTC HERMES. Without any reasons microphone stop working. Everythink is fine, i can call and do voince records, and then i got call or i just want to do voice note and nothing beside noise is recording. I dont know why it happining. After some time all back to normal, i can call and they hear me, also my voice note are loud and clear. My radio is 1.16. I reinstal my software to PDACornerPro.V25.NonRBSN.Opera. I did do HardReset and this mike problem always come back.. WHY? How make it work correct?
PLEASE HELP ME
Click to expand...
Click to collapse
Well sounds like it might be hardware. If you've done a few hard resets and tested before installing any software and the problem is still there sometimes, then I'd say it's hardware.
The m/board on the Hermes is not one that you can really work on with ordinary soldering tools. A repair shop could check by using a heat gun to check the contacts on the Mic. If that fails then it's likely either the mic coil or a problem with the contacts at or coming from the USB connector.
Mike
I say something more. Now i hear myself on voice note but really quiet like 1/10 normal volume.
neonq said:
I say something more. Now i hear myself on voice note but really quiet like 1/10 normal volume.
Click to expand...
Click to collapse
Yes, but even with an open circuit / damaged coil, cracked connection, you can sometimes have sufficient leakage current to get a faint response from things like microphones and speakers. I still think it's probably hardware - but thoroughly check all the software possibilities eg clean install, stock ROM etc.
Hm i open hermes but im noob in that stuff so everythink look fine for me with microphone. I clean that think to protecting microfone. The problem of couse dont disappear. But.. its look like always when I plug in usb to spv, microphone start working fine.. Not always but moust of time it is solution.. If it is a hardware what i should to recommand to replace in service? Microphone?
ignore me, re-read what you put and decided i was a nab
Hey,
I have problem with my htc tytn herm200.
couple days ago i synced my herm200 with my computer using USB cable then i disconnected it and after that all sounds stopped working. Only vibrate works but no sounds...
sounds & notifications are enabled so thats not problem.
I have hard resetted my phone once but no still not working.
I have tried google my problem but i cant find any fix for that problem
so i hope u can help me.
lowned said:
Hey,
I have problem with my htc tytn herm200.
couple days ago i synced my herm200 with my computer using USB cable then i disconnected it and after that all sounds stopped working. Only vibrate works but no sounds...
sounds & notifications are enabled so thats not problem.
I have hard resetted my phone once but no still not working.
I have tried google my problem but i cant find any fix for that problem
so i hope u can help me.
Click to expand...
Click to collapse
There are a couple of possibilities. One of the most likely to check out first is that one of the pins in the USB port of the phone has become bent and crossed another pin. Use a magnifying glass to look in the port and if you are careful any bent pin can be tweaked with a pin/needle.
The USB port carries sound connections for earphones and thus problems here can affect the sound.
Mike
hmmm seems that all pins are okey so that wasnt problem.
lowned said:
hmmm seems that all pins are okey so that wasnt problem.
Click to expand...
Click to collapse
Well, now to track down the other possibilities.
Can I assume your in-call sound is working from the front earpiece?
If so then I think the next most likely cause is that the small white connector block for the rear speaker has been dislodged. Not Uncommon and a fairly easy fix - Just need to push it back on again.
See Here:
http://forum.xda-developers.com/showpost.php?p=1376254&postcount=2
To remove the back casing see here:
www.mikechannon.net
Mike
YEAH! Now its working again. Thank you very very much : )
MikeChannon said:
Well, now to track down the other possibilities.
Can I assume your in-call sound is working from the front earpiece?
If so then I think the next most likely cause is that the small white connector block for the rear speaker has been dislodged. Not Uncommon and a fairly easy fix - Just need to push it back on again.
See Here:
http://forum.xda-developers.com/showpost.php?p=1376254&postcount=2
To remove the back casing see here:
www.mikechannon.net
Mike
Click to expand...
Click to collapse
Thank you for your valuable solution It worked on mine
Hi!
My HD2 have stopped to sound in speaker, the in-call sound are Ok. Only the music and ring signal is gone.
If the speaker are broken, can i repair it by my self?
Is´t difficult to open the HD2? Manual on the net?
Thanks for any help!
leffep said:
Hi!
If the speaker are broken, can i repair it by my self?
Is´t difficult to open the HD2? Manual on the net?
Thanks for any help!
Click to expand...
Click to collapse
Q1. Yes you can repair it by yourself. Cost is very cheap too.. check on ebay for part.
Q2. Not difficult at all. Just follow the HTC guide on youtube on opening a HD2. You will need a blue plastic lever and Torque screwdriver.
Tnx for reply!
I read in another forum "bump the phone to a hard thing" and i started a mp3-song and try bumping.....
And YES the speaker started sounding !!! WOWWWW!
I just wonder: Are the speaker broken or only dirt in it? Will it stop again ?
Hard to say...
Just give it a few days and if it get worst or dies just repair it..
Good luck..
Hi,
I repaired my phone by same way "bump the phone to a hard thing" and i started a mp3-song and try bumping....
What is your experience after a month? Is it still working?
leffep said:
Tnx for reply!
I read in another forum "bump the phone to a hard thing" and i started a mp3-song and try bumping.....
And YES the speaker started sounding !!! WOWWWW!
I just wonder: Are the speaker broken or only dirt in it? Will it stop again ?
Click to expand...
Click to collapse
wow, was searching long time how to fix this issue with my speaker. Tried to reflash ROM and radio many times but it didn't help at all.
But this "bumping fix" helped!! Thanks
leffep said:
Tnx for reply!
I read in another forum "bump the phone to a hard thing" and i started a mp3-song and try bumping.....
And YES the speaker started sounding !!! WOWWWW!
I just wonder: Are the speaker broken or only dirt in it? Will it stop again ?
Click to expand...
Click to collapse
Great! Your thread bumped my loudspeaker to live too!
I came along this thread while searching for instructions to revert my phone to stock so that i could send it for repair.
Thx!
Bought me a HD2 from Ebay, and i'm having some trouble with that also.
Tried this bump fix, but it didn't work for me.
How hard should i hit it, and where?
if it doesn't work, where can i get the speaker, that send it to Brazil? eBay?
Thanks!!!
I 2nd the bumping fix! I just wish I didn't hard reset my phone 5 minutes ago! But at least I know it's a speaker issue.
'Bump Fix' was a miracle for me. I just realised today that my speakers are not working after missed many calls as it was not ringing. I just played back some songs and made sure it was a speaker issue and found this thread.
But I was not sure if this was just a joke or how hard I must bump. I just banged it on my sofa and did not work. Then just shake bit hard and I noticed that I heard something ( a part of song). Finally I gave a good 'Tap' on the speaker and it worked. Here are my steps and hope some one will be helped.
1) Play any music file
2) Turn the backside of the phone
3) Spot the speaker (left to the camera)
4) Use your thumb and middle finger (or any fingers to make it as a Carom shot) and hit hard.
5) Its ok to hit hard as long as you use your fingers. But make sure you do not damage the camera.
6) After few (for me 2 shots) shots, you will get your speaker back.
This is a good try before you take any hasty nasty actions like un/reinstall programs/drivers/ROM or do physical repairs.
Cheers !!!
I had the same problem over and over again, so I decided to open the HD2 ( following this info: http://tcrn.ch/pErvIr )
The speaker is connected to the main board with two small springs.
I cleaned the springs a bit, and made them a bit longer (by pulling them).
The sound is now working 100%, but now I've got another problem.. WiFi
As long as I'm next to my AP, WiFi is working (low signal), but as soon as I move away from the AP, no more WiFi (no signal)
I'm sure that it's an antenna problem within the HD2, and will open it up again to see if I can fix it.
Okay.. Fixed it.
The WiFi connector got disconnected when opening the HD2 (see pic)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
See here the small springs on the speaker that I'm talking about.
You guys rule. I poured over my wifes phone for 10 hours last night. Geeze, next time I'll remember that google is my friend
CONFIRMED: the fingers on the speaker method worked for me. Thanks for the info guys!
Hi,
worked for me too
It worked.!!!
Thank you ..... I follow your advice and it worked..... I also spayed the contact with electric contact degreaser. Now my phone sound perfect.
Thank you ..
it helped me bumping phone on hard surface
I experienced my HD2 speaker not working for about 30 minutes, a couple weeks ago, (prior to flashing Android Gingerbread 2.3.7. I just could not get the speaker to work, ( music or speaker phone. After flashing it with Android I have not had anymore speaker problems at all. I never tapped it or shook the phone at all. I wonder could it be a software problem? I have heard complaints about the HD2 speaker stopping to function intermittently. Again mine has not had that issue since I flashed with Android.
nice one I tried it for my friend hd2 and it worked
several days ago i also dismantling my HD2, speaker just won't work, open it and found that springs pin that sticks to the pcb plate was dirty, clean with alcohol and yeah it's working again. Just sharing, it isn't to hard to do and you will had new experience
maneshbt said:
'Bump Fix' was a miracle for me. I just realised today that my speakers are not working after missed many calls as it was not ringing. I just played back some songs and made sure it was a speaker issue and found this thread.
But I was not sure if this was just a joke or how hard I must bump. I just banged it on my sofa and did not work. Then just shake bit hard and I noticed that I heard something ( a part of song). Finally I gave a good 'Tap' on the speaker and it worked. Here are my steps and hope some one will be helped.
1) Play any music file
2) Turn the backside of the phone
3) Spot the speaker (left to the camera)
4) Use your thumb and middle finger (or any fingers to make it as a Carom shot) and hit hard.
5) Its ok to hit hard as long as you use your fingers. But make sure you do not damage the camera.
6) After few (for me 2 shots) shots, you will get your speaker back.
This is a good try before you take any hasty nasty actions like un/reinstall programs/drivers/ROM or do physical repairs.
Cheers !!!
Click to expand...
Click to collapse
Thanx! It worked!
I have used a small knife and hit the speaker few times with the wooden handle. No damage, speaker works